Wmp54g driver installed, but not seen in the Device Manager

Similar Questions

• Application install but not found in the device

  I installed an application through the Application of Desktop Manager section using files .alx file. The blackberry that I use is Blackberry Curve 8520 (version 4.6.1.286). But it does not show in 'Downloads' or 'Applications', although in the "Setup", it is displayed in the application list. Can someone indicate what problem and how to do so that he can use?

  No, it is not an application. It is the application by using the features of the camera.

• KB2633880 - KB2518864 - KB2572073 installed, but not "seen" by Windows Update

  KB2633880 - KB2518864 - KB2572073 installed, but not "seen" by Windows Update

  Today (Tuesday 22 may 2012), after seeing the yellow icon in the taskbar, I ran Windows Update and KB2633880 - KB2518864 - KB2572073 successfully installed, I turned off the PC by clicking on the red icon Turn Off with a shield icon, expected for all 3 updates to install, 4-color and for the PC to stop itself. It took a while, but everything went well. No error message.

  After turning on the PC, I went back to Windows Update and was surprised to see Windows Update suggests to install... KB2633880 - KB2518864 - KB2572073 which is the same three components I have installed successfully.

  I ran Microsoft Fix It that 1 issue (update of Windows components needs to be repaired (next line) repair of components Windows Update.) I clicked Next. Everything went well. I had a green check mark 'Fixed '.  I turned off the PC (without having to install 3 updates which I have already installed).

  I turned on the PC and went to Windows Update, asking me to install KB2633880 - KB2518864 - KB2572073. It's like Windows Update does not "see" that these 3 elements have already been installed.

  Note: I have the same problem on another PC. The two PC XP SP3 and are stand-alone PC. One is a desktop computer. The other laptop.

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  When you disable Antivirus:

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• DVD/CD drive is not visible in the Device Manager, but it works.

  Original title: My dvd/cd drive is not visible in the Device Manager but

  This works because I have jst begin with him. I can hear the disc running, but nothing ever comes and when I go to computer its not visible there either.

  Hello

  See the methods listed in the article mentioned below.

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 how to back up and restore the registry in Windows.

  See this link to view the hidden devices:

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  I hope this helps!

• computer (Vista) tells me there is a problem with a scanner, I have not, say to uninstall, but it does not appear on the Device Manager

  tried to install camara, but when it says click on your product, but the camara is not on the list, only scan appears on the list, but I don't have a scanner. tried to uninstall, but does not appear on the Device Manager. try to download programs, and they do not arise in Start menu, just uninstall it list? Thank you

  Hello

  I suggest to uninstall unwanted software from your computer and then try to install the camera. Visit the link below to find the steps on how to uninstall programs "programs and features".

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  After you have installed the camera, please check in the folder C:/Program files if it shows there.

  It may be useful

• HP ENVY 17-j113tx TouchSmart: Bluetooth paired but NOT connected to the device

  Bluetooth paired but NOT connected to the device - question - Upload of files from device to PC fails.

  Description of the problem
  
  

  • Download a file from PC (Win10 x 64) for Android phone has worked well.
  • Download the same file from the phone on PC (Win 10 x 64) - FAILURE.

  Someone knows how to deal with this issue, provide a work around...?

  I have way too much time on my hands right now...!

  Treatment

• Ethernet adapter is not showing in the Device Manager

  

  I have a vastro 460 with i3 with intel and Windows 7 32 bit. try to install the driver for the network card, but does not. Ping works but do not show in the Device Manager.

  Any help will be much appreciated

  Hi EMH.

  You will need to install the Chipset Drivers first and later network adapter drivers. The IP address that you have ping is the local host and works, even when there is no network card detected.

  Please download and install the NIC in the network section and the section Chipset Chipset drivers from the following link, by drilling in the serial number:
  http://Dell.to/QjjZDA

  Please let me know if you need more assistance.

• What do you do if your cd/dvd drive does not exist in the Device Manager but always turns upward when you put a disc?

  HI, I lost my cd/dvd drive. It was there before, and when I had a successful previous problem to solve this but not this time. I did the upper and lower bit of regedit but without success. When I picked up this last time I learned to do something with the power reset but can't remember how now.
  I can't even get off the ground with the help of microsoft as cd/dvd players do not appear on my device manager.
  I use a portable Pavilion of HP9000 with a play version of Vista that is updated.
  Everything else works fine but just not drive.

  Hello

  I would like you to follow the steps below and check them off if they help.

  Step 1:

  I suggest to Uninstall third-party software for CD burning temporarily and check if the CD is recognized.

  Step 2:

  I would say that you go to Device Manager,

  a. click on 'View' and 'show hidden devices ',.
  b. once the device is found, click top and "search the hardware changes.

• Total memory of 4 GB newly installed does not appear in the Task Manager

  Total memory of 4 GB newly installed does not appear in the tab of the Task Manager performance. Only 3.3 GB appears. Is something wrong with the chopsticks of mem or mem from Vista 32 bit OS limit uses at this level. I have SP2.

  http://support.Microsoft.com/kb/929605

  "System memory shown in the system information dialog box in Windows Vista is less than expected if the 4 GB of RAM is installed.

  This behavior is the expected result of some hardware and software factors.

  Various devices in a typical computer require memory-mapped access. This is known as memory-mapped i/o (MMIO). For the MMIO space is available for 32-bit operating systems, the MMIO space must reside in the first 4 GB of address space.

  For example, if you have a video card that has 256 MB on-board memory, that memory must be mapped in the first 4 GB of address space. If 4 GB of system memory is already installed, the part of this address space must be reserved by the graphics memory mapping. Graphics memory mapping replaces part of the system memory. These conditions reduce the total amount of memory available to the OS System.

  The reduction in available system memory depends on the devices that are installed in the computer. However, to avoid potential driver compatibility issues, 32-bit versions of Windows Vista limit the total available memory to 3.12 GB. See the section 'More information' for more information on potential driver compatibility issues.

  If a computer has many features implemented, the available memory can be reduced to 3 GB or less. However, the maximum memory available in 32-bit versions of Windows Vista is typically 3.12 GB.

  See you soon.

  Mick Murphy - Microsoft partner

• not listed in the Device Manager webcam...

  Hello..
  I have a Toshiba satellite A305 S6916
  Windows Vista SP2
  I've never used my webcam... then I went to use and found the Camera Assistant Software and when you click on it... He says that the webcam is disabled (well enough) or not found... so... I went to the Device Manager to see if she was there... There is no imaging device listed... no webcam at all... everything I tried failed and nothing seems to answer my problem... Help, please... No Chicony or whatever it is listed

  Hello

  Check in (Setup/BIOS/CMOS) settings as you start - usually F2 then attention screen - see if it
  is a switch off your camera.

  Go here and download the latest drivers for the camera for your model and version of Windows.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=2205370&RPN=PSAGCU&modelFilter=A305-S6916&selCategory=3&selFamily=1073768663

  Check with Toshiba support, their drivers online (update or reinstall) and their forums.

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp Toshiba - Forums
  http://laptopforums.Toshiba.com/

  ------------------------------------------------------------------

  These are the usual methods to install the drivers for the device.

  Control Panel - Device Manager - Imaging - write down of the brand and the model of camera - double
  Click on it and on the tab of the driver is version. Now, click drivers update (which cannot
  nothing that MS is far behind the certification of drivers). CLICK RIGHT on the camera.
  UNINSTALL - REBOOT - it will refresh the driver stack.

  Now, go to the system manufacturer's website and download the latest driver of the camera and other partners
  the camera software (if not more recent get the same).

  Just you'd go to Toshiba Support and get the driver for your model laptop.

  Go to your model.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Good time to get some other updates here.

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each
  pilot.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable driver facilities in
  Windows updates, that leaves about Windows updates but it won't install drivers
  who will be generally older and cause problems. If updates offers a new driver can
  HIDE (right click on it) and then go get new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Realtek NIC does not show in the Device Manager - until a hardware scan is done

  A few months ago, I purchased a dv6 3240us and not downgraded to XP Pro win7 no problem, everything has been installed - everything I tried worked fine without any problem at all. I do not use this computer on the Internet - but I got the opportunity to connect the NETWORK card to a piece of equipment, I was working on that. When I went to change the IP address of the laptop - no local NIC (supposed to be Realtek) present in the Device Manager.  I installed the driver when I went down to XP without error.  I can only see the wireless adapter and it also shows on the system tray. When I right click on network adapters in Manager devices and do a scan for the hardware - the Realtek card is? and now everything works fine until I stop, then I have to go the process again. I watched the Realtek driver and he says its all working properly - any suggestions?

  Hello:

  I'm not familiar with the BIOS settings too consumer laptop, but see if there is a setting for a LAN Power Save Mode - maybe in the configuration menu of the device.

  On HP Business laptops, there is such a context, and the default value is enabled. What is this setting is to remove the wired NETWORK card at least that the PC is plugged in and connected to a LAN cable. This saves battery power.

  They also have a LAN/WLAN definition switch that disables the NETWORK adapter when the other is in use. For example, if I plug a wire to my Wired NETWORK card, my wireless NETWORK card is automatically disabled.

  If you have such a LAN Power Save setting, turn it off, and your NETWORK card must always be visible in Device Manager.

  Paul

• BlackBerry smartphones does not connect to the Device Manager after upgrade [USB]

  Hello

  I've updated de.141.151 and just after the update has been made, whenever I try to connect my BB via USB, I get the message says:

  "Unrecognized USB device".
  The USB devices for computer mark attaached has malufunctioned and windows does not recognize it. "

  I tried cutting things:

  -Restart of BB

  -Restart the PC

  -Repair the current installation of Desktop Manager

  -Restore an older version of the Desktop Manager version

  PS: it is not unknown devices in the 'Device Manager' of the pc so there is nothing to uninstall and reinstall

  All are taken out with no results,

  any suggestions?

  Thank you.

  Found the solution, remove the battery after the closure of the DM, connect the usb cable and then replace the battery, the pc will read it.

• built-in webcam not found in the Device Manager, Samsung r710 laptop, windows 7

  I have a laptop Samsung R710, who settled with Windows 7. The laptop came with a built-in webcam. I was not able to get a piece of software to recognize the camera. I did a system restore. Updated the drivers. Visited the Samsung website for updates. When I opened the Device Manager to see the drivers for the webcam, webcam not found in Device Manager.

  Any help to fix this would be greatly appreciated.

  Thank you, I must admit to thinking in the same direction you... buy a separate camera or wait until he is more under warranty and have a quick look at the wiring around the hinge.

• Pilot DAQmx 14.1 installed but not seen by USB-6221

  Hello

  After a week of fighting to install driver DAQmx on my 2013 Labview (Win XP), I finally got with OR DAQmx 14.1.

  All right, I can run my screws

  But, when I connect my NI USB-6221 BNC-nothing happens.

  I checked in MAX if she communicated, MAX sees the device but says that the device drivers are not installed.

  Then I checked if there was other drivers for this device on the site Web of SNA apparently no, it runs with DAQmx.

  Someone have a solution?

  Thank you

  The descriptions I see say that USB-6221 is a legacy device.  That probably means support for it in future versions of DAQmx were dropped.

  I found this http://sine.ni.com/psp/app/doc/p/id/psp-84/lang/en

  It does not say definitely what versions of DAQmx take in charge the device, but this list seems to only go up to version 9.8.

• Adobe Creative Suite 5.5 Design Standard for PC, installed but not started that the folder is empty, why? How should I do?  Is there an Adobe customer service or are we just orphaned Adobe with an expensive product to know our

  Adobe Creative Suite 5.5 Design Standard for PC.  Installed but the program does not launch because the folder is empty.  An ideas?

  Thanks for the reply.  I am a little resourceful orphan and I now work on my own.  If I still have problems I'll be back.  Once again thanks for the reply.