application is not running on the target system

Similar Questions

• This application is not compatible with the operating system installed. Please upgrade to Windows 98SE, Windows 2000 or more.

  Hi all

  I recently installed a mod for S.T.A.L.K.E.R SoC V1.004. The game won't start not even, instead, it gives me the following message:

  This application is not compatible with the operating system installed.
  Please upgrade to Windows 98SE, Windows 2000 or more.

  I'm under Win 8 64 bit. I have uninstalled and rebooted twice (both game and mod) does not.

  I have to downgrade to XP to be able to play this awesome mod, he ran on this platform with the same configuration before, why he now rejects it know not only the people at Ms.

  Please help if possible

  Thank you very much

  Pierre Viljoen

  Probably, all in all probably is a 16-bit program, and as such does not work on Windows 8.0/8.1 64 bit. In addition, the game seems to have 20 years or more. You can try running in compatibility mode, but I think that the game is dead. Hope this helps and if you need help please post and we will be happy to help you.

  The above opinion is mine and casually and does not necessarily reflect that of Microsoft, they are employees. or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe"-John Muir

• Applications are not loaded in the operating system 7 simulators

  Dear BlackBerry developers,

  I can't get my apps loaded into the OS 7 simulators. I use BlackBerry Java plug-in for Eclipse 1.3.0 and downloaded BlackBerry JRE 7.0.0.  I tried "Run as-> BlackBerry Simulator", but the application has not been loaded into the Simulator. In addition, although I had installed several OS 7 simulators, they are not listed in the peripheral dropdownbox of the Configurations run-> tab Simulator.

  I tried to load the app manually in the Simulator, but I couldn't it no more. Results expected - > Standard - > 7.0 folder contains a .cod file and many .debug files. I tried the .cod file, but it does not appear in the Simulator.

  Then I downloaded the BlackBerry Java plug-in for Eclipse 1.5.0 but still no application in simulators...

  I'd be happy if I have a suggestion here...

  Best regards

  Well, it turned out that I had too many image files in the res folder. Remove a few solved the problem.

  Also, re - install simulators in the directory where the older simulators made visible in Eclipse plug-in.

• CC Adobe applications do not run on the mandatory profile from Microsoft.

  Good night

  Carry out us some profiles of tests in our environment and including the mandatory profile (Microsoft).

  A question that profile with adobe (Photoshop, Illustrator, InDesing, Prime Minister, Flash etc.), we have installed DC applications when I run these applications on the mandatory profile occurs runtime error, the program opens with an error message.

  Even the user who has the mandatory profile as an administrator, the machine, applications to open with run-time error.

  When I run the same program on the same machine with a normal profile (without administrative rights), applications run normally

  Thank you.

  Marcelo Leite

  Thanks for responses Marecelo Leite.  Mandatory profiles are not currently supported by Adobe Creative applications.

• Message "this application will not work in this operating system" at the start.

  Original title: this application will not work in this operating system

  After starting, I get this error message:

  Stop: this application will not work in this operating system

  What application is this? How can I fix? I am running XP SP3

  CZFMDXPK c:\program files\fdd + fever disease combo reader\czfmdxpk.exe a the culpit. The problem is resolved and no Malware found. eventvwr helped me identify other problems, and now I'm curious on how to disable the stubborn programs in msconfig. I'll get.

  You did a great job and thank you very much. Have a beautiful weekend. Rainer

• Launch the KVM console: could not validate the certificate. The application will not run

  I use MAC OS and see another error message "certificate validation failure. The application will not run. This error message is seen in release of Java 7 u21 and later also.

  Exception in detail shows:

  java.lang.RuntimeException: no Java triggered, not managed exception! (Original problem: try to insert a list not property object {})
  "https://172.27.136.185"= {} ".

  key AllowNoPromptSites)
  at com.sun.deploy.security.MacOSXUserTrustRecordList.nativeAddTrustRecord (Native Method)
  at com.sun.deploy.security.MacOSXUserTrustRecordList.addTrustRecord(MacOSXUserTrustRecordList.java:92)
  at com.sun.deploy.security.MacOSXTrustUI.evaluateTrustAfterShow(MacOSXTrustUI.java:230)
  at com.sun.deploy.security.MacOSXTrustUI.evaluateAsTrustedSite(MacOSXTrustUI.java:186)
  at com.sun.deploy.security.MacOSXTrustUI.evaluateTrustAndShow(MacOSXTrustUI.java:156)
  at com.sun.deploy.security.MacOSXTrustUI.showDialog(MacOSXTrustUI.java:79)
  at com.sun.deploy.security.X509Util.showSecurityDialog(X509Util.java:152)
  at com.sun.deploy.security.TrustDecider.isAllPermissionGranted(TrustDecider.java:805)
  at com.sun.javaws.security.AppPolicy.grantUnrestrictedAccess(AppPolicy.java:295)
  at com.sun.javaws.LaunchDownload.checkSignedResourcesHelper(LaunchDownload.java:1851)
  at com.sun.javaws.LaunchDownload.checkSignedResources(LaunchDownload.java:1527)
  at com.sun.javaws.Launcher.prepareResources(Launcher.java:1283)
  at com.sun.javaws.Launcher.prepareAllResources(Launcher.java:636)
  at com.sun.javaws.Launcher.prepareToLaunch(Launcher.java:338)
  at com.sun.javaws.Launcher.prepareToLaunch(Launcher.java:238)
  at com.sun.javaws.Launcher.launch(Launcher.java:127)
  at com.sun.javaws.Main.launchApp(Main.java:460)
  at com.sun.javaws.Main.continueInSecureThread(Main.java:292)
  to com.sun.javaws.Main$ 1.run(Main.java:125)
  at java.lang.Thread.run(Thread.java:695)

  Pointers to launch KVM in my system, would be really useful. I'm stuck for over 2 weeks now :-)

  Thanks in advance,

  Suresh.

  Suresh,

  can you provide more details.

  Server model?

  version of the firmware?

  Please read the article if this can help:

  http://www.Cisco.com/c/en/us/support/docs/servers-unified-computing/UCS-...

  -SK

• ERROR: The target system must be running a 32 bit OS. When you try to open files

  Original title: Openfiles.exe

  Hello

  I am trying to identify the files opened using the command WIndows Openfiles.exe. But I get an error message "ERROR: the target system must be running a 32 bit OS.»

  I would like to understand why this error and how to get out of this.

  I understand that because of the 64-bit computer, even if it's a 64-bit machine as it should work.

  Kind regards

  Francis Amalanathan Duraisamy

  Hey Francois,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home

• JavaError: "failed validation certificate. The application will not run.

  HI, OTN,.

  1. I uninstalled the EPM

  2. install 11.2.3.500

  3 configuration is complete.

  4. download and install JDK 1.6_45

  5. while I run the Regional service console I get the error message

  JavaError: "failed validation certificate. The application will not run.

  java.security.cert.CertificateException: your security configuration will not allow the authorization of new certificates

  at com.sun.deploy.security.TrustDecider.isAllPermissionGranted (unknown Source)

  at com.sun.javaws.security.AppPolicy.grantUnrestrictedAccess (unknown Source)

  at com.sun.javaws.LaunchDownload.checkSignedResourcesHelper (unknown Source)

  at com.sun.javaws.LaunchDownload.checkSignedResources (unknown Source)

  at com.sun.javaws.Launcher.prepareResources (unknown Source)

  at com.sun.javaws.Launcher.prepareAllResources (unknown Source)

  at com.sun.javaws.Launcher.prepareToLaunch (unknown Source)

  at com.sun.javaws.Launcher.prepareToLaunch (unknown Source)

  at com.sun.javaws.Launcher.launch (unknown Source)

  at com.sun.javaws.Main.launchApp (unknown Source)

  at com.sun.javaws.Main.continueInSecureThread (unknown Source)

  to com.sun.javaws.Main$ 1.run (unknown Source)

  at java.lang.Thread.run (unknown Source)

  6 console file is not available "Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\". I missed a step in the installation and the configuration?

  Need help, the team

  Concerning

  Brouwer

  Have you tried to lower the security?

  Check the support matrix - http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html

  

  You can also install the Regional service console

• The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file.

  
  I moved a listener on a host in a House different oracle. The headset works fine, but EM 12 c shows that the listener is down with the following summary:

  The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file. CORRECTIVE ACTION: To monitor this "EM listener target" with its current configuration, you must stop the process of listening running and start it using the Listener parameter file: opt/oracle/product/12.1.0.2/network/admin/listener.ora. Alternatively, you can update "this target LISTENER. Location ORA setting"with the location of the listener running, which started using the: opt/oracle/product/11.2.0.3/network/admin/listener.ora.

  EM 11 g, I simply changed the configuration of the listener for the different oracle home, argued the change and in a few minutes the listener would show that 'UP' with the oracle of new home. I upgraded to MS 12 c (12.1.0.4) and can't find how to do this. Can someone give me the procedure.

  Thank you

  Ron

  Hi Ron,

  Can you please do the following?

  -Create a for the listener listener.ora file, stop and start the receiver using the listener.ora file. If the file is located in a default location, set the TNS_ADMIN environment variable to that location before you start the listener.

  -Log on to the EM console, go to the homepage of the listener.

  -In the Oracle Listener menu, select target Configuration > Configuration of the analysis.

  -Ensure that the parameters, including the Listener.ora directory, are properly.

  Kind regards

  -Loc

• Satellite P100-324 - GPU overheating due to fan does not work in the operating system

  Hello world.

  While trying to solve the problem of RAM of 4 GB ([this thread | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=28374&tstart=0]), I meet another weird thing - gpu overheating due to fan does not work in the operating system.

  Now, I restored the XP MCE using the Toshiba Recovery and I was VERY surprised to see that the problem still exists! As soon as loading the system GPU fan stops, and there is only tranquility. The application load is heavy on GPU and reaching 104 results by reducing its GPU and MEMORY clock values and NOT in the activation of the fan.

  The same thing happens in 64-bit gentoo. ACPI can be turned on or off, it is not serious, the GPU fan always dies as soon as the system load. In non-OS environments (bios, program of recovery, etc.) the fan works fine, GPU cooling from time to time.

  This problem occurs in versions of BIOS: 2.40, 4.00, 4.20.

  Any help would be greatly appreciated, since this laptop is my main working tool and I can't let go 14 days (service).

  I saw in your other thread that you have updated the BIOS and you have installed several different OS.

  Fact is that the BIOS v 4.2 package contains BIOS 32-bit and 64-bit OS.
  Your laptop has been preloaded with Win XP MCE 32 bit. Please use the 32-bit BIOS if the original XP MCE running on the laptop.

  Best regards

• This application could not start because the configuration - side by side - is incorrect

  After the upgrade to Windows7 x 64 professional, I am now get, "this application could not start because the configuration - side by side - is incorrect ' nero drive. I tried to reinstall the program and uninstall Microsoft Virtual C++ packages + without any result.

  Any help would be appreciated.

  Hi ChickC  

   

  Welcome to Microsoft Windows 7 answers Forum!

  a. use the System File Checker (SFC.exe) tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  ·         Infoermation more on SFC scan found in this document:

  http://support.Microsoft.com/kb/929833

  b. perform a disk check:

  Use the following steps:

  1. Open computer by clicking the Start button, click computer.
  2. Click the drive you want to check, and then click Properties.
  3. Click on the Tools tab and then, under error-checking, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.

  To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  1. Click Start.

  Depending on the size of your drive, it may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  The .NET framework update

  Download and install the most recent of the .NET Framework

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en

  If the error still persists please provide us with the error log:

  Type eventvwr.msc/s in the address bar.

   The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

  It will be useful.

  Thank you, and in what concerns:

  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

• Application does not connect to the server using WAP2.0

  Hello

  I used following code to get the suffix of the url that is required to connect to the application server using WAP2.0

         if(CoverageInfo.isCoverageSufficient(CoverageInfo.COVERAGE_DIRECT))
          {
                  //WAP 2.0
              String uid = null;
              ServiceBook sb = ServiceBook.getSB();
              ServiceRecord[] records = sb.findRecordsByCid("WPTCP");
              for (int i = 0; i < records.length; i++) {
                  if (records[i].isValid() && !records[i].isDisabled()) {
                      if (records[i].getUid() != null &&
                          records[i].getUid().length() != 0) {
                          if ((records[i].getCid().toLowerCase().indexOf("wptcp") != -1) &&
                              (records[i].getUid().toLowerCase().indexOf("wifi") == -1) &&
                              (records[i].getUid().toLowerCase().indexOf("mms") == -1)   ) {
                              uid = records[i].getUid();
                              break;
                          }
                      }
                  }
              }
  
              if(uid!=null)
              {
                  if(AppConfigurations.DEBUG)
                      System.out.println("Connected using direct WAP2.0....");
                  return ";ConnectionUID="+uid;
              }
          }
  

  I am same ConnectionUID as present in this complete book in Options in the device.

  Even application does not connect to the server using WAP2.0.

  Let me know what other things should I check to make application to connect to the server using WAP2.0.

  My phone is BB 8900 and OS 4.6.1

  WAP connection will pass through the gateway of the carrier.  This gateway can oppose your respect, or might be trying to optimize the data, or can display a login page for you.  Try the same URL that you use in your program, directly with the WAP browser on the device and see if that runs through effectively.

• Creative Cloud applications do not appear in the creative cloud download window

  Creative Cloud applications do not appear in the creative cloud download window

  The Creative cloud only window the list programs that the system is able to run.  If some are missing, this may mean that the system does not meet the minimum requirements to run the applications.

• Applications are not running correctly

  I installed the iOS Update 9 and therefore count my applications do not run the way they were accustomed to, something fishy is going on in the back end, I guess. If anyone has an idea about this then please let me know. I need your help

  Hi Shayadri!

  I understand that your applications do not work properly after installing iOS 9.  I understand how important it is to have your apps working correctly, and I am pleased to offer you some advice.  Please try all the tips in this article to support, and if you're still having problems with third-party applications, you will see instructions to contact the developer of the application of aid.

  If an application you have installed unexpectedly closes, unresponsive, or does not open

  Thank you for using communities of Apple Support.

  See you soon!

• T610 with Windows Embedded 7 - the system does not license for the operating system image

  Hello community,

  I bought a refurbished computer ThinClient T610 that is running a Windows 7 Embedded English. The label on the package says, that the computer ThinClient is allowed with W7E. When I now run Easy Tools installed on the computer ThinClient hp to create a USB Image with the German language, everything works fine: the image is downloaded from the web and put on the stick.

  But after you start the stick, the installation program tells me: "the system does not license for the operating system image. What I am doing wrong? The BIOS is already the latest.

  Or y at - it another way to transform the operating system in German? There should be an option to download additional languages, but this particual window has no other options. And I have not found any manual way to download other languages.

  Concerning

  Michael

  Sometimes it can be so easy... ;-)

  So here's my solution:

  1. go on the Web for hp Support site

  2. go in the software and driver download

  3. set the language of driver on the language of your choice (in fact: it was the main problem)

  4. download an operating system image

  5. run the configuration tool and copy the image of an operating system on a flash drive

  6. restart the workstation and install the os

  7. take advantage of your computer ThinClient in the language of your choice

  I don't know, why the hp Easy Tools downloaded the image of evil, but with this solution, that I find myself at the same point, as if they did.