This application could not start because the configuration - side by side - is incorrect

Similar Questions

• Error message - "this application could not start because the side-by-side - configuration - is incorrect, when you access programs."

  Hello

  Any help step by step to address this issue would be welcome

  On a Fujitsu laptop running Vista and MS office 2010, when I try to access word, excel, or one of the other programs, I get the following error message - "this application could not start because the configuration - side by side - is incorrect." see the applications for more information event log"

  Thank you in anticipation

  Hi BackrowSteve,

  1. did you of recent changes on the computer?

  Method 1:

  If you are facing the issue only with the Office programs, you can read the following article and check if that helps:

  http://blogs.technet.com/b/AppV/archive/2010/06/10/solution-possible-side-by-side-error-when-sequencing-Office-2010-on-Windows-Vista.aspx

  Method 2:

  If not, then you can uninstall all existing versions of Microsoft Visual C++ Redistributable Package and install the latest version of Microsoft Visual C++ 2010 redistributable and check if it helps.

  Step 1: To uninstall the package:

  a. open programs and features.

  b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.

  c. click on uninstall at the top of the list.

  Step 2: Download and install the latest package depending on the version of Windows Vista, you use and see if it helps.

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  Hope this information is useful.

• the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003

  the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003. PFA

  Ranjana,

  Please, review the vminst.log file located in % TEMP and see if we could see related errors.  Otherwise follow the troubleshooting steps below;

  1. check that the guest operating system that you want to install VMware Tools is fully certified.

  2. check that the correct guest operating system is selected

  3. check that the good ISO image is loaded. For more information, see ensuring good ISO image VMware tools is loaded (1003910).

  4. check that the VMware Tools ISO image has not been damaged. For more information, see determine if your VMware Tools ISO image is damaged on a host ESX/ESXi (1004820).

  5. If you are installing a Windows operating system, make sure that you do not encounter problems with your Windows registry database. For more information about the resolution of the problems of register with VMware Tools, see Impossible to upgrade the existing VMware tools (1001354).

  6. If you install on a 64-bit Linux guest OS, make sure that there are no missing dependencies. For more information, see Tools from VMware install fails to start the daemon of guest OS on the operating systems 64-bit Linux with the glibc-common package 32-bit installed (1023185).

  If your problem persists, please refer to: KB VMware: VMware Tools installation problems that are defective in a guest operating system or contact support.

  ~ dGeorgey

• Error hpqtra.08.exe - Unable to locate component this application could not start because the WINSPOOL. DRV was not found.

  Original title: I have Security Essentials, but still had this - HELP!
  I get error hpqtra.08.exe - Uanle component not found. Then he said: this application has hurt to start because the WINSPOOL. DRV was not found. This applicvation reinstalling may solve the problem.    Any clues on what to do?

  Try to reinstall your HP Imaging software and printer drivers.

  Jim

• Request a could not start because the configuration side by side is incorrect

  I recently bought a lenovo laptop computer and most of the applications show this message "the application failed to start because its side-by-side configuration is incorrect. Please see the application event log or see or use the command-line sxstrace.exe for details"I also tried to restore its settings to factory and is went to safe mode and tried to run one of the applciations and appeased recived this error I have read also that this error is caused by C++ I checked my programs and it had the following C++:

  Microsoft Visual C++ 2005 Redistributable 8.0.56336 version

  Microsoft Visual C++ 2005 Redistributable 8.0.59193 version

  Microsoft Visual C++ 2008 Redistributable - x 64 version: 90.330729.17

  Microsoft Visual C++ 2008 Redistributable - x 86 version: 90.330729.17

  Please can you help me solve this problem

  PS I have windows 7 home 64 bit premuium

  Thanks in advance

  Hello

  Thank you for contacting Microsoft Community.
  You may have to contact support to application for further assistance team, because we can not comment on third prerequisite software needed by applications. It is not just Microsoft Visual C++ 2005 or Microsoft Visual C++ 2008.

• Get speech recognition error message could not start because the configuration of the language is not supported, the language must match the language of the user interface

  I am running Windows 7 Ultimate 32 bit, when I run speech recognition it fails and the following message appears,

  Voice recognition couldn't start because the configuration of the language is not supported, the language must match the language of the user interface.

  I tried to change the language, then back to British English, but the problem is still there, I'd appreciate any help with this problem

  Is there a solution to this problem yet?

• After installing the new hard drive and using recovery discs, I get this message could not start because the following file is m issing or damaged system32\drivers\pci.sys

  I just replaced my hard drive with a new because the other HD said imminent failure or something like that! Basically the hard drive was about to fail and I so now the new one installed and I used my recovery disks and all seemed well until the recovery disks have been completed and the computer says to get out them. Then the computer restarted several times and then I get this message:
  Windows cannot start because missing or corrupt the system 32\drivers\pci.sys
  Then he said: "you can try to repair this file by starting windows setup using the original configuration of the CD-ROM.
  Select 'R' in the first screen to start repair.
  one of the many questions I have is that CD-ROMs are talking? It is the recovery disk, they want me to or what? also if you know a CV or another page which includes help on this specific topic would also help! Thank you
  also, I can still use the old drive hard when it is installed on my laptop!
  HP pavilion dv5220us running windows xp
  I had advanced care system that had a top registry Fixer and I got ccleaner as well on the computer
  internet security Norton 2011

  Hello panjok2,

  Sometimes recovery CD are dependent on the architecture of a hard drive.  If it is different from the original disc, then we have problems.

  In this case, the best thing you could do is contact HP and see if this is the case.  If it is not why this happens, they should be able to help you as well because they are the ultimate authority on their recovery process.

  Let us know if you have any questions.

  Best regards

  Matthew_Ha

• Unable to locate the Explorer.EXE component, this application could not start because iertutil.dll was not found. Reinstalling the application may fix this problem

  This problem occurred immediately after the installation later microsoft update 02/08/2012

  clearly the result of the last update of windows xp

  Hello

  Try to uninstall and reinstall Internet Explorer 8.

  1-click Start > run type cmd and press enter

  2-copy following order %windir%\ie8\spuninst\spuninst.exe and right-click on cmd window and select Paste and press ENTER.

  3. After uninstallation, restart your computer

  4 - Download and install IE8 from this link http://www.microsoft.com/download/en/details.aspx?id=43

  I hope this helps.

• Error when you try to start Windows Live Messenger: this application didn't start because the d2d1.dll is not found

  I get this error for windows live messenger when I start msn _ (THIS APPLICATION COULD NOT START BECAUSE it could NOT FIND a d2d1.dll, PLEASE REINSTALL AND perhaps THE PROBLEM will BE SOLVED))

  I HAD A PROBLEM WITH MSN

  1. I DID FORMAT MY PC AND I START FROM THE BEGINNING

  2. I DID ALL THE UPDATES

  3. I INSTALLED WINDOWS LIVE ESSENTIALS 11

  4. ONCE I INSTALLED WINDOWS LIVE ESSENTIALS 11 I BEGINS AND IT WORKS WHEN I REBOOT MY PC AND I START IT AGAIN, I GET AN ERROR SAYING

  (CETTE APPLICATION POURRAIT PAS DÉMARRER parce QUE ne pourrait PAS TROUVER UNE d2d1.dll que s'il vous PLAÎT RÉINSTALLER ET PEUT-ÊTRE LE PROBLÈME SERA RÉSOLU)).

  WHAT IS THE PROBLEM?

  PLEASE LET ME KNOW THAT I DON'T KNOW WHAT ELSE DO

  Not certain how much this will help, but Windows Live questions should be handled by Windows Live Solution Center.
  This is the Windows Live Solution Center Portal:
  http://windowslivehelp.com/

  I hope that you will get a resolution from the experts here.
  One thing... they aren't this quick response to questions. I said that my personal experience. So, be patient. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Error message: Winlogon.Exe could not locate the item. This Application did not start because Comctl32.Dll was not found.

  Update of security hung up during installation. I waited 12 hours for the update complete and nothing happened. Whe I reboot XP P4 syster, I get the Message from messageError: Winlogon.Exe could not locate component. This Application did not start because Comctl32.Dll was not found.

  Re-installed SP3... Installed hard drive then... cloned old drive and new drive... After several updates, it seems to do very well. Tried several programs/operations and seems normal. One day turned but didn't have to build another system or this one back up.  Thanks for the idea.     F

• Once I turned on the computer I got the following message: Windows could not start because the following file is missing or damaged. System32\Drivers\Ntfs.sys

  I just download Microsoft Office 2010 Professional and then turns off the computer with XP operating system. Once I turned on the computer I got the following message:

  Windows could not start because the following file is missing or damaged;

  System32\Drivers\Ntfs.sys

  You can try to repair this file by starting Windows Setup using the original Setup CD

  Select 'r' in the first screen to start repair.

  Then, I started the computer with the Original installation CD and press 'r' by following the instructions. Then, I received this message:

  1: C:\WINDOWS

  Which Windows installation you want to connect?

  (to cancel, press enter)

  What do I put here?

  You must first start on doing something so USB drive a bootable Hiren.

  Here's how:

  I'll recommend you use Hiren boot CD (it will go also to a flash/USB stick/USB).

  It's good for you, because there a lot of tools more on that on the Recovery Console CD of XP, doesn't your administrator passwords and you will not have to futz round in your BIOS, if any afflicted system has SATA drives - Hiren can deal with this.

  You will have a bunch of great tools that you have in XP... Recovery Console an editor of the register, adjustable password and an office that resembles Windows XP so you will feel comfortable flexibility.

  You can easily copy your personal data (documents, pictures, music) to an external drive.

  A system of work, start by downloading the latest version on Hiren Boot CD from here (it is a substantial download but worth it):
  http://www.hirensbootcd.org/download/    (look to the bottom of the page).

  Unzip the Hiren to a folder where you can find it.  There's a Hiren. BootCD.15.x.iso that you have to then.

  Hiren was instructed to make a bootable USB drive that you can use, but it takes you first burn the .iso to a CD image file and a few other measures, so I suggest another way and here's how:

  Download RUFUS 1.3.2 or whatever the latest version is here (read a few things on the page so you can learn more on this subject):

  http://Rufus.AKEO.IE/

  I will warn to be careful that don't accidentally format you a hard disk - don't forget your USB key is in and know what the drive letter!  This part makes me still a little nervous, so be careful.

  Launch of RUFUS and all default values should be fine for the device, choose letter of your USB drive, quick tag format FAT32, it if you want and in the Format options box, click on the little icon that looks like a CD and a window will open.  Navigate through this dialogue to point to the folder that contains the Hiren. BootCD.15.x.iso that you have unpacked above and the box should change to say the image ISO (RUFUS includes the Hiren ISO file).

  Double check you have the right device selected in the top (NOT you HDD) click Start, acknowledge receipt of the warning and let it finish (it will take a little time) it copies the files.   Hiren ISO is also a good size.

  When RUFUS is finished, it will say "DONE" at the bottom.

  Put the USB in the afflicted machine and reset/reboot and regardless of the button you press to get a boot menu where you can select the USB drive as first boot device (it's F11 for me).  If you do not see a start menu choice, you will need to set your BIOS to boot from USB first instead of the HARD disk.

  When the Hiren menu displays, choose the XP Mode of Mini and it will start loading (slowly from a USB key) and finally, you should see a windowsy looking for office.  You should recognize the part and feel uncomfortable, but it is not your office - the office of the Hiren!

  Remember: you do not start on your hard drive, - you started in the Office of the Hiren.

  A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

  Sometimes that works, then you can also click on start, run and in the type box:

  cmd

  Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

  CHKDSK c: /r

  This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.  You may need to run more than once.

• "When restarting, get the error, Windows could not start because the following file is missing or corrupt: < root Windows > \system32\ntoskrnl.exe.

  Original title: black screen

  Attempt to restart the Gateway system running XP Pro.  The message "Windows has not start because the following file is missing or corrupt: \system32\ntoskrnl.exe" Please reinstall a copy of this file.  What do I do and where is this file?

  There is a good chance that the disk check running the Recovery Console will solve the problem.

  1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
    
  2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
    
  3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
    
  4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
    
  5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
    
  6. at the end of the output of scan type > press ENTER.
    
  7 restart your computer.

  If you do not have a Windows Xp disk, follow the instructions HERE to create a Windows Xp Recovery Console

• 10201 install: application could not start because appHelp.dll missing

  I try to install 10201 (32-bit) on windows server 2008 (32-bit).
  I get this error when I click on C:\10201_database_win32\database\install.exe
  
  
  pop up comes with message
  "oui.exe - Unable to locate component".
  X Application failed to start because appHelp.dll was not found.
  Reinstalling the application may fix the problem
  
  
  My question is "How do I install this app?
  
  Installtion logs give no clue. And installtion fails with meaasge send files of the unknown to oracle.
  

  Using paramFile: C:\10201_database_win32_3\database\install\oraparam.ini
  
  
  
  
  No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
  
  The commandline for unzip:
  C:\10201_database_win32_3\database\install\unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles/"*.jar" -d "C:\Users\iicadmin.MES\AppData\Local\Temp\OraInstall2011-05-24_12-47-54PM" 
  The commandline for unzip:
  C:\10201_database_win32_3\database\install\unzip -qqq ..\stage\Components\oracle.swd.oui\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\Users\iicadmin.MES\AppData\Local\Temp\OraInstall2011-05-24_12-47-54PM" 
  The commandline for unzip:
  C:\10201_database_win32_3\database\install\unzip -qqq ..\stage\Components\oracle.swd.oui.core\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\Users\iicadmin.MES\AppData\Local\Temp\OraInstall2011-05-24_12-47-54PM" 
  
  The number of files bootstrapped for the jre is 584.
  
  The number of files bootstrapped for the oui is 100.

  Please suggest
  Because zI am not able to search in metalink and I get no results from google search

  Oracle 10g is supported in Windows server 2008 (32-bit) standard

  Where to check this info?

  Help, please

• Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  System:

  Toshiba Satellite A-75

  WIndows XP Home Edition
  Fully updated with Svc Pk 3
  HITACHI Travelstar hard drive 80 gig

  Nice day

  I'm getting this ' file is missing or damaged:------WINDOWS-SYSTEM32-CONFIG-SYSTEM ' error and Windows does not start in the F8 boot options. When I disable the auto reboot, I get a BSOD 51 registry error, consistent with the file "missing or corrupt" error Surprisingly "Recovery Console" works so I used to run chkdsk. This has not solved the problem, but even once, surprisingly, the utility reported no fixed error. Ok. I do research online (using another computer of course) and check out the many tips that I copy some files in my "c:\windows\repair" folder in the folder 'system '. Before I had time to do that, however, I found an article from Microsoft stating that this should not be done if you have an OEM System... what I'm doing. Apparently, hives system on these OEM installed OS set other passwords that can permanently block you on your records if you use this method. Thanks for the warning. My system restore disc is nothing more than a tool of re-insall OS that will wipe all my data in the process, and this is not desirable. Currently, I see again all my data on the drive by using the "recovery console". I'm ready to thread the needle on this one in the hope of re - access the operating system, although in some limited capacity. Any help would be greatly appreciated.

  When you run chkdsk in RC, did you use the /r switch? This is the key! In other words, this should be the command:

  Chkdsk /r

  (there is a space before the slash)

  Moreover, KB307545 can be run safely on most OEM XP installations. Of course, nothing is guaranteed 100%.

  Before you do this or else, you really must ensure all data is stored safely. One way to do this is to start on a live Linux CD and then copy the files to an external hard drive. Another way is to connect the problem hard drive into a working PC and copy the files in this way. This could be done by the servo drive or with an adapter like this:

  http://www.Newegg.com/product/product.aspx?item=N82E16812161002&TPK=N82E16812161002

• Window live messenger Application could not start because its side-by-side configuration is incorrect

  I have vista operating system, and every time I update my Windows Live Messenger will not fuction. Citing this fustrating to see poping up dialog box.

  c:\ProgramFile\WindowsLive\Messenger\msnmsgr.exe

  The application has failed to start because its side-by-side configuration is incorrect.

  See the log even application for more details.

  This gives all of the solutions for the non-fuction?

  I have vista operating system, and every time I update my Windows Live Messenger will not fuction. Citing this fustrating to see poping up dialog box.

  c:\ProgramFile\WindowsLive\Messenger\msnmsgr.exe

  The application has failed to start because its side-by-side configuration is incorrect.

  See the log even application for more details.

  This gives all of the solutions for the non-fuction?

  Messenger - side by side configuration error

  Start button > Search box, type regedit > press the Enter key > (uac prompt) >

  expand (click the pointer before) HKET_CURRENT_USER >
  expandSoftware >
  expandMicrosoft >
  expandMSNMessenger >
  Expand PerPassportSettings > under PerPassportSettings, find 2 folders with a series of numbers > delete the two folders including their subfolders > window regedit.
  Restart the Messenger.

  If the above does not help, please repost to...

  Section of Threads Windows Live Solution center - forum Messenger - Messenger

  http://windowslivehelp.com/forums.aspx?ProductID=2