Application of Hyperion Planning Clonning Classic

Similar Questions

• Brews a new dimension in the Application of Hyperion Planning

  Hello
  
  I want to add a new dimension in the planning application. I have already some data in the ESSBASE cube.
  
  Is it possible to add a new dimension, without losing the existing data. Please guide me.
  
  I use version Hyperion 11.1.2.1.
  
  
  Thank you
  Sunil.

  To be sure why don't export you all the data in the format of the column, then you can create a rule from load to load again against a member in your new dimension.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Hyperion Planning and Varying attribute

  Hello
  
  Some can help me with the variable attribute in Hyperion Planning application.
  
  Hyperion planning support concept variable attribute?
  
  Concerning
  Evelyne

  Hello

  Varying attribute applies only to the essbase so far, it is also with the arrival of new versions.

  Sandeep Reddy, Enti
  HCC
  http://hyperionconsultancy.com/

• How to remove a classic hyperion, planning an application?

  Hi, I'm totally new for hyperion planning

  I tried to delete a classic planning application, but it gives an error of 'remove the application failed.

  the application was not there and there SSP too, I saw in the essbase.

  pls tell me a solution to do the removal.

  Hello

  You need RDBMS tables. I'm referring you to an old post - planning 11.1.1.3 - manually remove a classic Application

  Thank you

  (Please check this post useful or appropriate if this can help you)

• ODI to load dimensions in the Application classic Hyperion Planning 11.1.2.1

  Hello
  
  I tried to load some dimensions in Hyperion Planning 11.1.2.1 Classic Application using ODI 11 g.
  
  The problem, just the other side is
  
  org.apache.bsf.BSFException: exception of Jython:
  Traceback (most recent call changed):
  File "< string >", line 23, < module >
  at com.hyperion.odi.planning.ODIPlanningWriter.validateColumns (unknown Source)
  
  at com.hyperion.odi.planning.ODIPlanningWriter.loadData (unknown Source)
  
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  
  at java.lang.reflect.Method.invoke(Method.java:597)
  
  
  com.hyperion.odi.planning.ODIPlanningException: com.hyperion.odi.planning.ODIPlanningException: the source result set contains the column [C1_ACCOUNT] that has no corresponding column on the side of planning.
  
  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
  at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
  at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
  at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
  at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:338)
  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
  at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:263)
  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:822)
  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:83)
  at java.lang.Thread.run(Thread.java:662)
  
  This is the code that returns the error
  
  from com.hyperion.odi.common import ODIConstants
  from com.hyperion.odi.connection import HypAppConnectionFactory
  import java.lang class
  import java.lang Boolean
  import java.sql *.
  from java.util import HashMap
  #
  # Get the select statement in the meeting area:
  #
  SQL = "" "select C1_ACCOUNT 'Account', 'Parent' C2_PARENT, C3_ALIAS__DEFAULT ' Alias: Default ', 'Memory' C4_DATA_STORAGE, C5_AGGREGATION__PLAN1_"(Plan1) aggregation"of" C$ _0Account "where (1 = 1) '"
  
  srcCx = odiRef.getJDBCConnection ("SRC")
  
  stmt = srcCx.createStatement)
  
  srcFetchSize = 30
  
  stmt.setFetchSize (srcFetchSize)
  
  RS = stmt.executeQuery (sql)
  
  #load data
  stats = pWriter.loadData (rs)
  
  #close the database result set, connection
  RS. Close()
  stmt. Close()
  
  I created 2 models in my designer:
  
  HYPERION_MODEL_TEST and ORACLE_SQL_SOURCE, the first has the reverse engineering dimensions ranging from planning and the other is to get the table that contains the members of my size. For the staging area, the synopsis in memory DB is used.
  
  LKM SQL for SQL and SQL IKM in Hyperion Planning is used.
  
  In the interface, I take the source table and the dimension of planning as a target I map the Parent, Alias account: by default, the data storage and ownership of aggregation (Plan1) of the target of the GBA in my dimension table.
  
  All be saved well and when I run it I get the error, clues?
  
  Cheers, Sandi

  First of all there is no interest in using the memory storage engine as the staging area if Oracle is your source, you can also use Oracle as the transit area, the staging area probably will not be used as usual a straight SQL query will be generated.
  In your target mappings have also tried setting "run on the staging.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Hyperion Planning 9.3.1 to 11.1.2.2 applications Migration

  Nice day
  
  We need to migrate a Hyperion Planning 9.3.1 to a 'classic' Hyperion Planning 11.1.2.2 application application. Why classic? Because we don't see the need to have an application of EPMA.
  
  We are not quite sure of the procedure. Can you please help me check the steps?
  
  1 save the relational tables of demand in the 9.3.1
  2 backup essbase objects (rul, otl, CSC, rep)
  3. install EPMA 11.1.2.2 in a new server, including a new instance of sql server.
  4. create a new application database name and connection and apply a 'create', ' create a new request of planning on version 11 ensure that the admin is the same name as your old 9.3 planning app.
  If the admin of your 9.3 planning takes a native user and not the system default hyperion (account = admin) admin then
  'Go into the database for the planning tables app and HSP_USERS table, store the value of the user 50001 SID' JohnGoodwin:
  Re: upgrade planning 9.3.1 to 11.3
  
  5. stop services to stop the application.
  6 restore all relational tables of the 9.3.1 application (step 1) in the application only (step 5).
  7. change in the application of database XXXXXXXXXXXXXXXX
  8. start services, applies to create in the application.
  9. copy of objects (step 2) except otl.
  10. export the data of the 9.3.1 and import data from 11.1.2.2 application.
  
  So I guess this we will have a new Hyperion Planning application in 11.1.2.2 with contour, web forms, to-do lists, etc.
  Other questions:
  • Is it feasible? Or I need to first import a 11.1.1.3 planning application instance? And then from there move to a 11.1.2.2 instance?
  How can • what business rules, I import them at calc Manager, which is simple operations?
  • What security? What do I need to create security groups and users to the SSP before step 6.
  • All of the warnings?
  
  Sincerely, thank you for your help
  
  Published by: Pavel Moreno on March 4, 2013 05:54
  
  Published by: Pavel Moreno on March 4, 2013 05:55

  Pavel Moreno wrote:
  Hi John,.

  Thank you for you answer. Do you mean that the process should be as follows (I have add step 4 and remove step 7)? What is a migration of business rules and GestionnaireCalc, how can I move it?

  Have a read of http://john-goodwin.blogspot.co.uk/2013/01/alternative-methods-for-migrating.html

  John
  http://John-Goodwin.blogspot.com/

• Hyperion Planning 9.3 BPMA vs classic

  Hello
  
  We are on Hyperion Planning 9.3 (including all the latest patches). We are building a new planning application. Currently we donot have an ETL tool and it does not appear we will get for each other a few months up to what our new planning application is deployed into production. So in summary we will not have an ETL to solve the below problem.
  
  I used classical planning as an ETL tool to build my meta - data in recent implementations and have not had the chance to use BPMA. Recently, I started to get aquinted with BPMA and understand some of its benefits. However, I have a few specific questions;
  
  1. I know classical planning allows a manual creation of members, BPMA allows the same? BPMA should have flat file or table interface to create or add members? Our business users would be manual creation of some members, or for example to change the month of beginning or end of a "scenario". Thus, BPMA allows manual editing and push metadata?
  
  2. If an application is created using BPMA, they would have to interface via BPMA not classical planning and more. Is this true?
  
  3. I understand that it is possible to convert a classic application of planning in BPMA but 'NO' to vice versa. Is this true?
  
  4. Finally, a more difficult question, a more specific question that a little, dictates the choice for us.
  
  My customer wants to each Department to make their respective budgets (noting unusual there). However, most of these departments 'Project' and more specifically budget for budget based on 'Project name' (which are unique and not generic) as opposed to "Project numbers" (is not a standardization project number as yet). The challenge will be "project names" in Hyperion Planning (unfortunately it does exist not in the ERP/GL because these are new projects).
  
  Thus, although the finance team approves the budget of each Department, ultimately they like each Department would be able to create their respective names 'project' in Hyperion planning. And planning of such capabilities that support retail, etc. wouldn't work because they love resulting variance of "Names of project" and slice-n-dice from "project names.
  
  Now if we had an ETL tool above would have been simple, that I would have just created an automatism to say pickup a file with "Project Names" from a folder location is pre-determined. However, because we donot have an ETL, I was wondering if BPMA could do the same thing, i.e., in way automatic pick-up a file to a folder and create members and refresh Hyperion Planning? Could the "batch processing" in BPMA handle this?
  
  Appreciate all your answers...

  If you go down the road of the use of an ETL tool to integrate as a result of the EMP, so, my suggestion is ODI (Oracle Data Integrator)
  I wouldn't go too EPMA up to version 11, otherwise you'll be on here post error messages

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Clone Hyperion planning and production to create the instance of development

  Hello
  
  We have recently upgraded to 11.1.1.1, and currently, we do not have a test instance. We want to create a test instance. To create an instance of the application of the oracle bs, clone us the app and create a new instance. However when we try to do the same with the planning application, our dev instance is always pointing to the instance of prod. How can we get the dev instance to point to the dev database. Our configuration is essbase on linux and other applications are based on windows.
  Pointers are greatly appreciated.
  
  Prasad

  Hello

  I did not fully understand what you have done, say you that you have installed v11 on test machines and copied on patterns?

  If you cloned just the planning system database, then all data sources will point to the location of origin and will need to reconfigure, it's that if it allows you to reconfigure the data sources, I don't know how you have configured.

  The best option with planning is to create an empty application on the target computer, and then migrate the schema.

  If you want to take this option while the migration was covered many times here, is such an example here:- Migration of Hyperion Planning Application

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Application settings for all users in Hyperion Planning

  Hi, I work in Hyperion Planning 11.1.2.3.500.17, is it possible to configure the application for all users settings in Hyperion Planning with the application owner user? I want that all users consider the alias of a members of the workflow.

  LCM exports using the user preferences located under Configuration, that generate an xml file, update the xml file and then import them into.

• Removal of the blocks #Missing in Hyperion, planning an Application

  We have implemented a Hyperion Planning budgeting application. It has 3 types of plan.

  for one of the 3 types of plans, the aggregation rules takes a long time, even if we have not given, again, we just enter some data for the test.

  What we found that, in Essbase there around 31,000,000 blocks have been created! most of them are missing blocks. some of the trade rules have the command createnonmissingblk on... This could be the reason for the blocks 31,000,000!

  My question is: How can I get rid of these blocks, taking into account the fact that I don't like if I lost data? And should I take a backup before performing a setting?

  Thank you

  After you run the VACUUM CLEARBLOCK, you do a restructuring on the database to get physically back space, in your case it should be very fast, because there are few data in the cube.

• I'm in 11.1.2.3, how do I initialize a hyperion planning application which will already have dimensions and examples of forms created?

  I'm in 11.1.2.3, how do I initialize a hyperion planning application which will already have dimensions and examples of forms created?

  Connect to the application, go to administration, application, manage applications, select the app, the actions and the initialization.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Hi all, can I know how to create filters in Hyperion Planning Application?

  Hi all, can I know how to create filters in Hyperion Planning Application?
  
  
  I don't know how to create filters in the Planning Application. but my boss asking me to create filters.
  
  Thank you and best regards,
  Stéphane

  Go to Administration > Dimensions > select a Dimension > select the Member you want to assign filters acccess to:-assign access
  Repeat the process for all the access permissions.
  If there is a lot of permissions set you could use a utility:-http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch03s07.html
  Refresh planning, including security filters
  Also have a read of:-http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/mg_secfilter.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Accounts for plan 1 dense and sparse for plan 2 to a Hyperion Planning application

  Nice day
  
  I have two cubes in Hyperion Planning Application only, I wish that both have a Dense accounts cubes and for the second sparse accounts.
  
  The cube that I have held with sparse accounts is mainly because I like the accounts of 600 to 800 and I need to have several attributes (with Dimensions of attributes to accounts).
  
  As far as I know the Dimension type of "Accounts" allow attributes dimensions when is sparse, but in Hyperion planning if the second cube accounts is Dense it me does not have this feature. Anyone know if this is an expected behavior? A bug? Or my mistake?
  
  Kind regards

  Take a look on:-http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/attr_man.html

  * "The account dimension is usually defined as dense, thus impossible to assign attributes to it unless it is replaced by sparse for all types of plan. If you replace a sparse dense dimension, all attributes and the values of the attributes of this dimension are deleted. » *

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Export and import Hyperion Planning application

  Hello
  
  How to implement the Hyperion Planning application from my development to production server?
  I'm working on Hyperion Planning 9.3.1 with database Oracle 10 on AIX.
  My English isn't the best, sorry!
  
  Thank you, Pablo.

  Hello

  This message should give you a reason for leaving - Migration of Hyperion Planning Application

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Failed to initialize the Application example in Hyperion Planning

  Hello
  
  I'm new on Essbase and Hyperion EPM system 11.1.1.1.0 and I'm trying to test the functionality of planning. I have installed and configured the EPM system, and when I run the Diagnostics of the EPM system, everything is successful unless connecting to Essbase Studio Server (which is a separate issue from another thread).
  
  I'm working with the example of planning application included with the installation. I followed the instructions given here from the blog of John Goodwin, but I encounter an error when I try to initialize the sample application. I also tried creating the application through the workspace, which is documented here. I get the same error during initialization of the sample application.
  
  I get the error message said: "failed to initialize the sample Application. See the log for more details. "Where this journal of planning? I'm running on Tomcat.
  
  When I try to create the database, following the blog of John, through the Administration > manage the database > Create, I also am getting an error on step 18 of 21: [console] verification of member formulas. The error reads as follows:
  
  com.hyperion.planning.olap.HspVerifyOutlineException: check the plan failed with the following errors:
  Error [1200497] discovered in the formula of Member for "411100" members
  Error [1200497] discovered in the formula of Member for "412100" members
  Error [1200497] discovered in the formula of Member for members "412200."
  Error [1200497] discovered in the formula of Member for "451000" members
  Error [1200497] discovered in the formula of Member to Member "501111".
  Error [1200497] discovered in the formula of Member to Member "501112".
  Error [1200497] discovered in the formula of Member to Member '501130.
  Error [1200497] discovered in the formula of Member to Member "501240".
  Error [1200497] discovered in the formula of Member to Member "501250".
  Error [1200497] discovered in the formula of Member to Member '511200.
  Error [1200497] discovered in the formula of Member to Member '511300.
  Error [1200497] discovered in the formula of Member to Member '511400.
  Error [1200497] discovered in the formula of Member to Member "511500".
  Error [1200497] discovered in the formula of Member to Member "511600".
  Error [1200497] discovered in the formula of Member to Member '511700.
  Error [1200497] discovered in the formula of Member to Member '511800.
  
  What should I do to get this application example upwards and running so I can see what he does?
  How to initialize the sample application?
  Why can't create a database correctly (without the above error), so I can then load data into the database of the Consol via the Essbase Administration Services Console? Currently, the outline in environmental assessments do not check (it gives me the same list of members of the above error messages), and so I can't load the sampleapp_data into the database. If someone saw, please help. Thank you.
  
  -Scott

  Hello

  If you remove the application, back, restart schedule, create the sample application again and initialize you should be fine, then you can return the clock to its normal state.

  You always make the changes on the side planning and when you refresh these changes will be pushed to essbase (which you can see with EAS).

  See you soon

  John
  http://John-Goodwin.blogspot.com/