Application of Windows Firewall.

Similar Questions

• Windows Firewall and Security Center will not be open - Application not found

  When I right click on my computer then properties, I get an error message "Application not found c:/windows\system32\rundl32.exe.

  In Control Panel, when I click on the Security center and windows firewall, I get the same thing.

  In the past, when I click on the above, the properties come with several tabs and the info on my computer and the firewall came to show if it is on or off.

  I recently downloaded by Comcast Norton Security Suite. I don't know if this happened before or after that.

  Also, I had something like 'XP Active something' burst by saying I had someone trying to hack into my computer and I might have a virus and run a scan now that I did. He came in saying that a list of things have been found and set up a page where I can buy protection for $59.99 per year. I did that and I who sold his to run a scan with Norton. It showed that she had blocked a Trojan horse and had several blocks of attempts to access my computer.

  Can someone please tell me what to do? I am not very computer English savvy, so simple and clear please.

  Thank you!

  Hi, it seems that you have an infection of malicious software on your computer, the best way is to run the Security Scanner

  just to go to http://safety.live.com and run a full scan service.

  Info on how to make it work just watch this tutorial

  http://www.YouTube.com/watch?v=NgH43lmxl-Y

  answer please if you have a problem

• Windows Firewall setting managed by application of the seller

  I can't turn on the Windows Firewall.  It is said that these settings are managed by application of the seller PROVIDER of firewall NORTON.  Is it because there is a conflict with Norton?  Always before, I have had the Windows Firewall and also Norton Firewall.  I don't know how the settings have been changed.

  Have more than one active firewall is counterproductive. It slows down your computer and both programs can result in conflicts between them. If you prefer the Windows Firewall, then you should check for Norton FAQ to see how to disable the firewall component.

• Windows Firewall 8 - applications allowed

  I try to let my audio Sonos system through the Windows 8 firewall provided with the operating system. When I go to the firewall however to view which applications are allowed, there is none in the box and when I click on change settings or enable another application, the buttons go gray and I can do without other. I tried to disable the antivirus software without achieving something different and also remove all Chater in the user account control. Surely, there should be a few apps "authorized" in the box?

  I ran the following command as an administrator and he said that he had repaired a few corrupted files (option/online C:\windows\system32>Dism/Cleanup-Image /RestoreHealth) but without effect. I also ran C:\windows\system32>sfc/scannow without seeming to reach anything.

  Any help or advice would be greatly appreciated. Jerry

  Hi Jerry,

  Check this link, it might help.

  Windows Firewall

  http://forums.Sonos.com/showthread.php?t=35165

• Firefox 28 not listed in the Windows Firewall Exceptions

  I am running SP3 Windows XP Prof, Firefox 28 and Windows Firewall.

  I recently noticed that Firefox is 'slow' loading and connection to Web sites.

  I checked the 'Exceptions' list in the Windows Firewall, but Mozilla Firefox did not appear. Why Windows Firewall application doesn't have access during the installation of Firefox? Internet Explorer was not either and that my original browser browser and becomes 'slow', that's why I changed to Firefox.

  Moreover, since 'Add' and 'give permission' for Firefox, it runs a lot faster.

  Thanks John!

• Can not enter the Windows Firewall settings

  Hello

  Can someone tell me what my problem is? When I try to enter my WF in the Panel, he won t let me do that. A message just because of an unidentified problem, windows cannot display only my windows firewall settings.

  Because of the informative posting, I would say you should ask Microsoft why you aren't able to open the firewall settings.

  If you're ready for a serious debate please let us know which mode of laptop you have, which OS is preinstalled it and which antivir application you use.

  Good bye

• Windows Firewall is not enabled...!

  Windows firewall in not enabled.

  I want to update my windows store application but a message that windows firewall is not enabled.when I guess the do, it dosent happen.

  a mistake is diplays i.e. 0 x 80070422

  This is something serious because I want to upgade windows 8 to 8.1.so please help!

  are the specifications of my laptop;

  Core i5 3210 m 2.5 gz

  6 GB of ddr3 ram

  hard drive 750

  OS 64-bit of Windows 8

  internet connection broadband.

  Hello

  Thanks for the update.

  -Download, install, update FREE Malwarebytes Anti-Malware'

  http://www.Malwarebytes.org/MWB-download/

  (do not install a Pro version or trial)

  -Perform a quick scan and see if something is detected - clean infections.

  Finally, follow the instructions in this article MS-> http://support.microsoft.com/kb/2519899/en-us

  Click on the thumb of white LAURELS (left). This way you'll testify for advice or help you have received.  If your problem has been resolved - click on the appropriate button and accept the solution. ***

• Add the windows firewall with the security log for windows 2008 Event Viewer

  Hi all

  I would like to see weather which is turn on the Windows or turn OFF firewall and at what time on Windows 2008.

  As what I had checked, I could see this on Windows 7 (Event Viewer/Applications and Services/Logs/Microsoft/Windows/Windows Firewall With Advanced Security/Firewall), but this does not show on Windows 2008.

  Is anyway to add this in Windows 2008?

  Your help is very appreciated.

  BR/WT.

  Hi all

  I would like to see weather which is turn on the Windows or turn OFF firewall and at what time on Windows 2008.

  As what I had checked, I could see this on Windows 7 (Event Viewer/Applications and Services/Logs/Microsoft/Windows/Windows Firewall With Advanced Security/Firewall), but this does not show on Windows 2008.

  Is anyway to add this in Windows 2008?

  Your help is very appreciated.

  BR/WT.

  Best place to get the most appropriate response is technet...

  Please repost this under, http://social.technet.microsoft.com/Forums/windowsserver/en-US/home

• Ethernet and Windows Firewall

  Hello

  I need to know what Windows Firewall rules must be defined for TestStand/CVI see the ARP protocol. We see nothing, no ethernet traffic.

  I have a system (Army Gold Master 7, using TestStand and CVI) who has "standard" Government firewall rules We strive to communicate by Ethernet to specialized devices and we see no traffic unless disable us the firewall. We are not on the internet (not allowed by gov). The specialized devices send a broadcast request for IP but the software it never sees.

  I added (incoming and outgoing) rules to allow traffic to and from my application (CVI app that does a lot of TestStand active X calls). In the logs I saw something on cviproxy so I put rules to allow that. I've set allow rules for TestStand Runtime engine. I also disabled Windows defender.

  Any suggestions? BTW, we will not disable the firewall once it is deployed.

  Thank you

  Hey Joe,

  I did some checking, and generally, CVI does not implement itself - treatment rather ARP packet, it uses Windows built in functionality to receive ARP packets and assign IP addresses. ARP is contained in the Protocol Ethernet himself and is at a lower level than the concept of ports, so that Windows Firewall cannot directly block ARP packets.

  Your software CVI aims to process ARP packets in some way, or are you just wanting to communicate with devices via Ethernet? If it's the last, then the assignment of intellectual property should arrive outside the CVI and regarding the CVI you must only make sure that the correct port has been opened for communication with the specialized unit. This port number would be depends on the configuration of the device itself.

  When you disable the firewall and are able to communicate with the device, how is the appliance gets its IP address? For example, it is automatically assigned by Windows or your router (with DHCP) or it has a static IP address assigned to him? It is possible that the IP address is assigned, but given that the specific communication port is blocked by the firewall, the communication can occur.

  I hope this helps a little, and if you can give us the answers to these questions, we can provide I hope to better understand the situation.

• the Windows Firewall has stopped working

  I tried the system restore to just before it stopped working

  Hi geoffrey,.

  System restore would have been my first suggestion, so that was an excellent choice on your part.  I would try it again maybe a few days earlier just to be safe, he did not start before you really notice or before, it became clear, as it is certainly the simplest answer, but frankly, I doubt that it will be more effective (but who knows - he can come back works perfectly and we are both happy, it was considered).  He also suggested that you know a little about computers, so I can provide instructions that contain everything you need but I will not go into nauseous detail unless you get stuck on a step and then you should post any problem you encounter and I will provide more help.  If you should post, don't forget to answer as many questions and include both the results of the proceedings or reports or copies or screenshots of screen that you can at the same time, so we can work on what to do then if none of this made the turn.

  How do you know if what she has stopped working?  Do you have an error message (if so, what was the full and exact message Word for Word, including all codes)?  You have more than one firewall installed on your system (like that which is part of Norton Internet Security, Comodo, or something else)?  What security programs do you use and that you have installed (all names and versions)?  What version of Windows you are using (for example, 32-bit Vista Business SP2 or other - please be precise otherwise)?  When this occurred and did you a software or a hardware changes (additions, deletions, upgrades or anything like that) since two weeks before the problem (if so, precisely what has been done in as much detail as possible)?

  Do you get this Center security or firewall Windows itself?  If you are using XP, post back with answers given that there is a limit to the options how can I cover without knowing the basic information.  If you use Vista or W7, go to Security Center or action center and check to see if there is a problem with the notification of the firewall or it's on.  If it's not on, it shows the details or links containing information about the problem?  If Yes, go to these links and copy the information and post here, so we can look at.

  Then go into firewall Windows itself (on the left side of the screen) and confirm that there is a problem.  If she too says it is disabled, click on change settings.  Make sure the firewall is turned on - if not turn it on, click on apply and then click OK and confirm that it starts and begins to work.  If it does not start, it provides an error message (If Yes, what is completely and exactly Word for Word with all codes)?  Click Advanced, and verify that all network connections are checked - make if all are not and click OK, then again try to turn on the firewall.

  If this does not work, go to start / Control Panel / Administrative Tools / Services and then highlight the Windows Firewall and click Open.  Click dependencies and go to each of them and make sure they are started and automatic.  Otherwise change it to automatic and start them.  If it is impossible to do, check their dependencies and do the same until you reach the end of the chain of dependence.  Now return to Windows Firewall and make sure that it is set to automatic and started.  Then restart.  When the system returns, return to the service and confirm that the Windows Firewall is started and automatic.

  Now, go into Windows Firewall and again try to launch and see if it lights.  Go to the center of security or Action and check that the firewall is enabled and works.  If so, the problem can be solved.  Just to be sure, restart and check the firewall to ensure that it is on and working.  If so, who should be the one.  But we do not know why it stopped, and if the problem may come back, then we must redouble efforts to find the cause or confirm that there is no problem.  Moreover, if the above did not work and Windows Firewall is still off, here's what you should do in any case.

  Go to start / Control Panel / administrative tools / Event Viewer and look for error messages regarding the Windows Firewall (there will be errors).  Look in system first and then in Applications.  When you find the error or errors, click on it for details, copy these details and display them in your next reply.  Well, they can help us identify the source of the problem and there a fix for it.

  We will check your system and hard disk for corruption files and try to fix it:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  , Type sfc/scannow go and let it run.  It will scan and try to the difficulty of some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  They tried to set itself to run at the next reboot.   Answer Yes and restart to run the program.  It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  Then, we will confirm this is not caused by a malware any.

  Update and run a full scan with no matter what security software you use, and remove or quarantine everything you find.

  First, try the following programs if you do not, because they can help. I recommend you download, install, update and run full scans with Malwarebytes:http://www.malwarebytes.org/ and SuperAntiSpyware:http://superantispyware.com/ and then run a full scan of Microsoft Security:http://www.microsoft.com/security/default.aspx. This may or may not remove the infections, but will probably not correct the damage caused by them. Even if they or your current AV software seem to work or indicate that you are not infected, you should not completely trust in them and must continue with the recommendations that follow (so it's up to you if you want to try them first, or just ignore all this and get help from an expert you really need as described below).

  Correctly and completely remove these infections can be complex and often require manual removal procedures (which may or may not be entirely effective either). Even if they work, I suggest what follows in any case, so that we can start it (you can ignore the methods above if you want it really is the way forward, but it won't hurt to them for trying).

  Please follow these recommendations of JimR1 - MVP compliments:

  You are running Microsoft Security Essentials?

  If Yes: start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected - and support and select the option for phone, chat or email (options vary depending on the region)

  If you are in North America, you can call 866-727-2338 for a free Microsoft Help for infections of virus and spyware.

  Otherwise:

  You can start here: https://consumersecuritysupport.Microsoft.com/ or here: http://support.Microsoft.com/contactus/cu_sc_virsec_master?WS=support#TAB0 for the help and support for malware infections.

  If this does not work, or that they can't help, try one of the compliments of forums-remove malware following PA Bear - MVP:

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?Board=10.0 http://www.spywarewarrior.com/viewforum.php?f=5 http://www.dslreports.com/Forum/Cleanup http://www.Bluetack.co.uk/forums/index.php and http://Aumha.net/viewforum.php?f=30

  I hope this helps.  If none of this worked, then after return with answers to ALL the questions above (especially the first paragraph) and the results of all the procedures and the test that you tried in as much detail as possible and with two copies of reports or screenshots (as you prefer).  Without this information, we do not know where to go next without guessing or recommend a more radical proposal that may be required.

  Good luck!

• Windows Firewall "Exceptions list".

  I am running SP3 Windows XP Prof, Firefox 28 and Windows Firewall.

  I recently noticed that Firefox is 'slow' loading and connection to Web sites.

  I checked the 'Exceptions' list in the Windows Firewall, but Mozilla Firefox did not appear. Why Windows Firewall application doesn't have access during the installation of Firefox? Internet Explorer was not either and that my original browser browser and becomes 'slow', that's why I changed to Firefox.

  From 'Add' and 'give permission' for Firefox, it runs a lot faster.

  The second name of the program is superantiSpyware, where SAS.

  MBAM has a very good reputation, more I think it is less intrusive than SAS.  That's why I suggested it.

  As far as the SAS 'System tools' are concerned, those who are different from the malware scan/remove main task which is the reason to run SAS.  The tools to answer the damage that could be caused by a malware attacks different various.  If you have a particular symptom required by one of the tools, then go and try - I have no experience in a way or another with any of these tools.  There is no reason to run all or part of the tools as part of regular maintenance.

• wczdlg.dll and netshell.dll missing and cannot start my Windows Firewall

  Hi all
  I hope that someone will be so good to help my with this situation I tried (and failed) solve this past week or so.

  I lost my firewall, l, and network connections.  As advised I checked the status of the automatic Wireless Configuration.  The State was "arrested" and was not a solution for this.  I continue typing applications for a solution ot wczdlg.dll and netshell.dll missing.   Now I can sign BT.openzone - it's the only way I can use the web.

  Also I can't start my Windows Firewall.  I have no idea why my system is so badly damaged - the only situation I had was that my charger no longer works and my laptop crashed.  I also brought my laptop (HP compaq nc4200-Xp) to my daughter.
  I don't have a recovery disc and the disc I have with drivers does not download.  I would be grateful for any resolution of this problem.    I'm only a moderate ad user have no knowledge regarding the actual system so need advice step by step.
  Thank you very much
  Jacky

  Hi Jacky,

  Thank you for your response.

  I suggest you follow the steps in the link below.

  Could not start the Windows Firewall service in Windows XP SP2:

  http://support.Microsoft.com/kb/920074

  Note: This also applies to Windows XP Service Pack 3.

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Windows Firewall and internet connection failure

  My Wi-wired connections and no longer work. My window firewall won't start. I now have a message to "svchost.exe. startuo - Application error The instruction at "0x7d4caa9b" reference memory at "0x00000010". The memory cannot be: "read" "Any ideas how to solve this problem?

  Hello

  Thanks for choosing Microsoft Community Forums.

  According to the description, it seems like you get an error message "svchost.exe - Application error. The instruction at "0x7d4caa9b" reference memory at "0x00000010". The memory could not be read. I'll be happy to help you with this problem.

  (1) when exactly you receive this error message?

  (2) have you made changes on the computer before this problem?

  I suggest you follow the steps to disable Windows Driver Foundation - User - mode Driver Framework and check if it works.

  (a) click Start and select run.

  (b) type services.msc and press enter.

  (c) search for Windows Driver Foundation - User - mode Driver Framework serviceright click Choose Properties in the Startup type and then select disabled.

  (d) to restart the computer.

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Why programs not marked in the list of windows firewall exceptions are still able to maintain the internet connection?

  Original title: exceptions to firewall

  Can someone explain how I have after uncheck the programs in the list of windows firewall exceptions, they are still able to maintain an internet connection? I use XP sp3.

  1. what makes you think that this unnamed programs are still able to maintain an Internet connection?

  2 Windows Firewall blocks unsolicited incoming connections.  Thus, for example, if you (or malicious software), set up a FTP server running on your computer, Windows Firewall will block an application from the Internet on your computer that are trying to establish a connection and download some of your files.

  However, when your web browser sends a request to a Web site server to load a page, incoming web server traffic is allowed because it's in response to a request made on your computer.

  This distinction between the incoming and outgoing traffic is why some people insist that the third-party firewall, which usually block/monitor of traffic in both directions is required.  The scenario is that you inadvertently introduce malware on your computer (in any number of ways), and then the malware "phones home" to establish a link with the bad guys, who continue to do what they want on your computer.

• "Due to a problem not identified, Windows cannot display Windows Firewall settings" when you try to change the Windows Firewall settings.

  Original title: WINDOWS firewall

  I GET A MESSAGE WHEN I TRY TO CHANGE THE WINDOWS FIREWALL SETTINGS - "DUE TO A PROBLEM NOT IDENTIFIED, WINDOWS CANNOT DISPLAY WINDOWS FIREWALL SETTINGS. HOW CAN I SOLVE THIS PROBLEM?

  IN ADDITION, I USE AVG INTERNET SECURITY 2013 AND THAT THE FIREWALL IS ENABLED AND I SEEM TO BE PROTECTED.

  Documentation AVG Internet Security 2013 States:

  Recommendation:

  Generally it is not recommended to use more than one firewall on a single computer. Computer security is not enhanced if you install several firewalls. It is more likely that some conflicts between these two applications will occur. Therefore, we recommend that you use only one firewall on your computer and disable all others, thus eliminating the risk of potential conflicts and problems related to this.

  You can read the AVG documentation by clicking on this link, and see section 6.5:

  http://AA-download.Avg.com/filedir/doc/AVG_Internet_Security/avg_isc_uma_en_2013_06.PDF
  
  So, if you are using AVG firewall, it's wise to just disable the XP firewall for more than a firewall running at the same time can lead to performance problems.  Choose one or the other, but not both.

  I thought installing AVG would understand this by itself, and you know what to do (used to) but I do not want to install AVG to see.