Application to the installer

Similar Questions

• Problem with the application after the installation of the .bar file

  Hello

  I created an application. Everything works fine when I compile Momentics, but when I create a file via the 'Export release build'.bar and install this file on the device app does not work properly.

  The application creates a profiles and showing them in the list view, all the data in the json file. When I install the application of the .bar file create profile and change the settings for this profile and return to the main screen, profiles disappear. This problem will not occur when you compile a program on the phone directly from Momentics.

  Welcome on the support forums.

  you reproduce the workflow step by step with a debug version?
  do you have any record that can give you advice? If not, add a little.
  where is the location json file that you use to save the data? Perhaps a relative path is used.

• Links to other applications in the installer

  Hi all

  my workspace contains many projects, so several executable files, but only one appears in the [start] menu after installation.

  In the [Edit Installer] [files], I added different executables in the [Program Files] [MyAppName], and indeed, they are installed.

  But the [Start > programs] [MyAppName] is empty. I can't see how there is not even one app? And how tdo Add shortcut to other executables? Do [Add File] seems to copy the full executable here.

  It is not clear how this thing works.

  Sorry, it wasn't quite what I asked, but I found the solution: it's simply in the tab "shortcuts". I just need to create one for every app I have copy.

• Unable to access applications after the installation of CC2015.

  I installed CC 2015 and when you access applications, the right spinning wheel will not stop. Help?

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-app-doesn ' t - open.html

  Mylenium

• logo of Córdoba with no application after the installation of the apk

  I am very new to this.  I did a simple Web site, essentially using phonegap and built with phonegap build.  When I install the apk on my phone I just get the "apache Cordova" robot and the flashing text that says "the device is ready.  Anything after that. It works with the phonegap android app, but it's just basically a web server for the app connect and it displays a page.

  So I have a few questions.

  1. Why is the logo of cordova apache still here?

  2. why my content does not appear?

  What, exactly, downloaded on the PhoneGap Build service? Do not forget that the CLI projects are not directly compatible with BMP - you must make some modifications to the config.xml file (paths so that the config.xml file must be relative to "www", not the root of the project).

• The application or the DLL C:\Program Files\Mozilla Firefox\MOZCRT19.dll is not a valid Windows image. Please check this against your installation diskette

  The application or the DLL C:\Program Files\Mozilla Firefox\MOZCRT19.dll is not a valid Windows image. Please check this against your installation diskette.
  Help, please. I was unistalling firefox and reinstall them again at least 10 times, but still does not solve the problem

  This has happened

  Each time Firefox opened

  few days back

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; InfoPath.2)

  I have the same problem

  deleted expletives - Maurane

• Equium A60 - 181: Installation of applications for the Toshiba

  I'm no stranger to Toshiba laptops and the various pilot facilities, but affecting this laptop for a colleague has cost me a significant amount of lost hair.

  I am unable to get some applications Toshiba works on XP SP2 Professional, namely the Toshiba Power Saver (fails with error 0x7E) & utilities Toshiba (refuses to proceed with the installation in the form of common modules not found).

  The failure of these two applications seems to be down to the "common modules" are not responsible. The common modules files are something I know, but there is not available for download from the Toshiba web site for this model.

  After talking to Toshiba Helpline, I was informed that the satellite is very similar to the Satellite and the common modules for satellite A10 files should work.

  Guess what. they do not.

  All the drivers have been installed in the correct order of the Web from Toshiba site.

  Can someone help Please

  Hello

  Everything that you have done is just and it is not easy to say why this happen. Is your version of WXP Pro SP2 integrated or not?

  This unit comes with SP1, and it is possible that you must preinstall the unit completely before installing SP2.

• Installation of El Capitan problem: "an error occurred during the preparation of the installation. Try running the application again. »

  I've been a fight 2 days now trying to improve my iMac 21.5 2009 end of Mavericks in El Capitan, but as the installation is about to be launched I get this message "an error occurred during the preparation of the installation. Try running the application again".

  Here is a list of all the things I've tried:

  Running the application again;

  Move the installation to another folder application;

  Control date & time and it was already correct;

  Do the installation in safe mode;

  Installation of the upgrade of another user I created only for that purpose;

  The computer restarts and I tried install the upgrade several times;

  And, to be sure that the installation application was not corrupted I made a copy of it on an external HD and tried to install it on my 2011 MacBook Air and it worked (I didn't install because I have El Capitan installed on my MacBook).

  Well, I don't know what else can be done, and I'd rather not have to completely restore my iMac.

  Please try installing again after taking each of these steps you have already taken it.

  Step 1

  Reset the PRAM from your computer.

  Step 2

  If possible, set the clock system as indicated here. If you can only boot into recovery mode, see below.

  In the OS X Utilities screen, select get online help. Safari will launch. While in recovery, you will have no access to your bookmarks or history. Load this web page.

  Triple-click anywhere in the line below to select:

  date 0801000014

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Quit Safari. You go back to the OS X Utilities screen.

  Select

  Utilities ▹ Terminal

  in the menu bar. It will open a Terminal window. Paste in the window by pressing the command-V key combination.

  Wait for a new line ending with a dollar sign ($) below what you entered. If it does not appear, press return.

  Quit the Terminal to return to the main screen.

  Step 3

  If your model has replaceable memory by the user and you have upgraded modules of memory, reinstall the original memory and see if there is any improvement. Make sure not to touch the Gold contacts. Clean them with a mild solvent such as rubbing alcohol. Spare memory must exactly match the technical specifications of the machine. Do not install more memory to the maximum value specified, even if a seller of RAM, or someone else, said you that it will work.

  Step 4

  Back up the data at least two different storage devices, if you haven't done so already. A backup is not enough to be sure. Backups are possible with Time Machine or disk utility. Preferably both.

  Erase and install OS X. This operation will destroy all the data on the boot volume, if you be better be sure backups.

• Installation of construction LabVIEW application disables the Windows Device Manager? Help on how to diagnose the problem?

  Please can anyone shed light on this, or suggest where to look?

  I built an application using the Application Builder of LV2014 (32 bit).

  On a Win7 X 64 PC at work, it installs and runs ok.

  On Win7 X 64 PC at the customer, it installs ok, but then after Windows restarts on demand 'device manager' no longer works and there are some unchangeable registry entries associated with nipalu. The client runs Symantec security software. A client COMPUTER technician is suggesting that LabVIEW is interacting with device drivers and this is the origin of the problem, but we do not know how to go further. It is not really acceptable to deploy computers where the Windows Device Manager no longer works. Surprisingly, the application itself works always - it's just Windows which messed up.

  Thank you

  Thanks for the suggestions. The company IT guy has not been able to talk to a person in NI UK support (no one was available), but he managed to keep it down to a problem with Dell Data Protection encryption Enterprise Edition. Delete first, then install the LabVIEW application, then reinsert DDPE gave a system where everything worked.

  We have built apps that used progressively more labview drivers (vision, labview base; digital i/o)

• How can I get the installer for my application check the operating system type and then install the correct driver type?

  I have a request that I wrote and have been use and distribute for awhile. The installer I created for this application is an additional installer to install a driver for the USB connection. The USB connection is actually a virtual COM Port. The problem is that the people who drafted modified driver setup the installation program itself. They used to have an installer that would check for 32-bit or 64-bit OS and then install the appropriate driver.

  Now, they have two distinct installation programs: one for the other for 32-bit and 64-bit. They let the user know their OS and install the appropriate driver. I'd rather not have to rely on my users to do. From what I've seen the creater Installer provides that an executable to be run after the application installs.

  Is it possible to have the installer of the application, check the type of OS and then run the correct executable file after installing my application? I think that I could write an Installer 'wrapper' that checks the type of operating system then executes the correct Installer. But I expect a better solution.

  Thank you
  Joe

  So, I make it work!

  The trick is to find a way to determine what type of OS you are using. The method I used was, indeed, read the environment variable. A buddy of mine sent me this link:

  http://StackOverflow.com/questions/2401756/how-to-find-if-the-machine-is-32bit-or-64bit One of the phrases he bibliography the Processor_Architecture environment variable.

  It seemed like a reasonable idea. So I started to research how read LV it environment variables turns out, you do it by reading a registry key. There is an example of LV on how to read a registry key. But I did not know where they are in the registry. So, I searched the Processor_Architecture registry. I found it in HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session Manager\Environment.

  According to the article in the link, this value will already be x 86 for a 32 bit OS, or something with 64 inside. I just check the response for x 86 string. If it is, I just run the x 86 version of the driver Installer. Otherwise, I run the x 64 version.

  It turned out to be as simple as that.

  I hope this helps someone.

  Joe

• conflicts for the installation of two labview applications

  Hello

  I have two applications LabVIEW 8.6 and can make the executable, then the installation for each of these files in the Project Explorer.

  After that I installed the FIRST application and when I want to install a SECOND, during the installation process, it indicates a newer version is currently installed even though I select a different installation path. The button "Next" is disabled, as shown in the attached screenshot.

  On the other hand, if I install the SECOND application first and then install the FIRST application, even if the installation paths are different, it installs the first application successfully but removes the second request.

  I don't know how to install both applications, one after another, regardless of the order. I appreciate any help or comment.

  See you soon,.

  Ali

  Make sure that both versions have a different code level.

  (Builder installer... Version information... Code upgrade. Simply press "generate" to create a new one for the installation program that is not working)

  See also this help page

  (If both have the same upgrade code, windows thinks that they are the same program and keeps only the higher version)

  (This image comes from 2015, do not know if it has the same appearance in 8.6)

  

• How to get the alert or deducted to the admin if the user AD installation of application in the domain system?

  How to get the alert or deducted to the admin if the user AD installation of application in the domain system?

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en-us/winserverDS

  It will be useful.

• How can I transfer OR-MAX configuration files during the installation of the application?

  I install my application on a PC that has no software EITHER.  The installation installs LV Run-Time and NO-DAQmx, OR MAX, but MAX configuration is the default value.  I use a USB DAQ.  I know that I can export the correct MAX configuration file but I don't know where to put it on the PC so that he sees MAX.

  Thank you.

  If you choose to include the harware config when you create the installation program, then you do not have to worry where it is placed and during the installation process, MAX on the new pc will attempt to import it

  If you want to manually copy the configuration on the new pc, put it anywhere you want. You must use the file > import the max function in order to use the new configuration.

• Installation of the application with the engine running and system Config API kills many services OR

  If I have an empty Windows 10 computer and install LabVIEW 2015 SP1f5 Run-time-Engine, then System Configuration 15.3.

  I see that several OR services are running OK on the machine subsequently:

  

  However, if I can install a built (LabVIEW 2015SP1) app - using an installer which includes also the 2015 SP1f5 RTE and the configuration of the system API 15.3, five services will not start and cannot be started manually either (affecting all the services into recovery mode restart fails too). Error code when you try to manual start is 1068 that indicates they are missing a dependency, but * any * of them will start...

  

  I suspect that is the reason that neither Max 15.3 ends with a timeout during the peripheral configuration warning - AND my use of RAD / system configuration set image function is a failure...

  Why the hell the same software support (which should really be installed in all cases, the application itself must be installed) has this devastating beats me. The only way to obtain the services of backup and running is to uninstall everything, even to delete all files remaining and records... and then reinstall the original RTÉ and SysConfigs.

  The problem seems to be a sort of obscure corruption both of my computers for development... I took the same source code and built the installer on a third computer with all the same IDE versions, and voila - everything works well.

  It would be good to know exactly what the problem is, but for now at least, I have a solution... (hopefully fix my machines and/or before you wipe them clean and reinstall the IDE together on them will get back on track...) Without knowing what the cause was however makes me wonder if I might have the same problem again later).

• Error message during the installation of the sound card: an error occurred during the installation of the device__ "e/s operation was abandoned because of a thread exit or an application request." _

  Hello
  I can't update the audio driver on my PC. When you try to install the driver (new sound card), I get the following message is displayed:
  There was a problem installing this hardware:
   
  An error occurred during the installation of the device
  "The IO operation has been abandoned due to a thread exit or an application request."
  The driver worked fine on this computer until a month ago. I think it's more a problem of Windows installation as a driver issue, but I do not know where to go from here. Any suggestions?
  Thank you
  I tried to install the sound card on different PCI expansion slots. I get the same message trying to install a USB sound card. The sound properties in the control panel are classified outside (non-active)

  Hello Smachbub,

  Thank you for your message.  Let's try one or two different things.  Please follow step by step.
  1. we will try to completely remove the previous sound card driver, then reinstall.
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Click on Device Manager.
  Click the (+) sign next to "sound, video and game controllers".
  Below, you should see your audio card, right click and select "Properties".
  Select the 'Drivers' tab and click 'uninstall '.
  After uninstalling the driver, reboot and go to your computer manufacture or website of the manufacturer of the sound card and download/install the latest driver for your device.
  If problems persist, try this same process as a new profile.
  2. to create a new profile:
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Double-click 'Users and groups' > select 'users '.
  In the right pane, right click and select 'add a new user '.
  Fill in the appropriate information, and then select 'create '.
  The new user must be added, right click on the new user and select "Properties".
  Select the tab "member of ' and click on 'Add '.
  Type Administrators and click on "check names".
  Once the name is entered correctly, click 'OK '.
  Log off your computer and connect with the new credentials.  Then try removing and reinstalling the driver.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.