Equium A60 - 181: Installation of applications for the Toshiba
I'm no stranger to Toshiba laptops and the various pilot facilities, but affecting this laptop for a colleague has cost me a significant amount of lost hair.
I am unable to get some applications Toshiba works on XP SP2 Professional, namely the Toshiba Power Saver (fails with error 0x7E) & utilities Toshiba (refuses to proceed with the installation in the form of common modules not found).
The failure of these two applications seems to be down to the "common modules" are not responsible. The common modules files are something I know, but there is not available for download from the Toshiba web site for this model.
After talking to Toshiba Helpline, I was informed that the satellite is very similar to the Satellite and the common modules for satellite A10 files should work.
Guess what. they do not.
All the drivers have been installed in the correct order of the Web from Toshiba site.
Can someone help Please
Hello
Everything that you have done is just and it is not easy to say why this happen. Is your version of WXP Pro SP2 integrated or not?
This unit comes with SP1, and it is possible that you must preinstall the unit completely before installing SP2.
Tags: Toshiba
Similar Questions
-
Equium A60-157 PSA67E: where to find the Toshiba common module
Slowly work his problems but can someone tell me what is the "Toshiba common module" as one of the programs will not because he can't find it.
Also the Intervideo windvd v5.0b11.288 - srs has been modified to Toshiba systems and it's around anywhere?
Thank you very much David
Hello
I checked the Equium A60 driver download area and there is no common module for download.
In General, the common Module is a tool for Win XP that is required for the execution of other tools of Toshiba correctly.I guess that common Modules are not necessary for this model of laptop.
With regard to the windvd: WinDVD can be downloaded from the Toshiba page, because it is not a tool of Toshiba and this tool has been a part of the recovery disk
-
Equium A60-181: how to connect to the router belkin wireless encrypted?
The title says everything, how can I connect this laptop to my network with 128-bit encrypted signal. The router that I m trying to connect to is a belkin and connected without any problem before encryption. So please help me because I want to use my laptop again with the guarantee of the encrypted signal thank you.
Hello Dean
If your laptop can see your WLAN, it must be a problem with the network settings. In my view, you must configure the router to the factory settings and try to establish the connection without any network key.
If it works well, you can then configure the network to be sure.
-
Need battery for Equium A60-181
I'm after a new battery for my notebook equium a60-181.
The mounted battery is a PA3384U-1BRS.
I looked on the toshiba web site and cannot find this model.
As he was replaced by another model, if yes what a number of battery should I look for.Hello, my friend. I see you are new in the forum. Welcome ;)
Now to your question:
You can order all the compatible parts and ASP support in your country. I think that guys order it directly from the Toshiba.
Anyway, the European Toshiba site contains a beautiful site on the options and accessories.
You will find lots of devices and parts which are included in the different categories and are compatible with Toshiba laptops.Check it out
-
Equium A60-181 (PSA67E) - cannot find the display driver
Due to problems with some games I did experiments with other ATI drivers for my laptop.
It turns out that their support for Open GL is scandalously broken so I tried rolling back the drivers.
Unfortunately Windows doesn't let me do it because I need the original driver files so tried to download on the Toshiba support page.
Well although it seems that the Equium A60 - 181 aka PSA67E does not appear as a product more also any attempt to seek A60-181 or PSA67E displays empty hits Unlike Google or Msn.What happens here? Please tell me Toshiba did not hold for this laptop isn't exactly new or old it is still worthy of driver / BIOS update support especially when needed.
Richard S.
Akuma is right. All the notebooks are listed in the archives.
Check it out. -
Equium A60-181: Win XP does not start successfully - the BSOD reboot
Hello.
I have an Equium A60-181 which has an operating system problem.
Loads of XP logo at the beginning, when it happens to show the log on screen, it is a quick blue screen of death error, and it restarts.I tried to go into safe mode, but it blocks on atisgkaf.sys.
Is that what I can do to save the operating system?
How can I start to diagnose if it's a hardware problem?
Thank you, Lawrence
Hello
The atisgkaf.sys file belongs to the graphics card driver.
But as Akuma has proposed, the Windows operating system does not load 3rd party in safe mode drivers.
This is why the ATI graphics card driver should not affect the start-up procedure.However, this is only my personal hypothesis and believe me; nothing is impossible, so a hardware problem might be possible.
But just a question;
Have you tried to reinstall the OS?
The installation process goes smoothly through the unique installation steps?I think that the new installation of the operating system is a good idea to find out if it is a hardware or software problem.
Maybe you should try it -
Equium A60 - 181 Win XP: card incorrect RLAN - icon notification taskbar
Hello world
Ive took my Equium A60-181 for quite a while now and its been fairly reliable, sound always connected via WiFi to my home network.
Very recently, however, the icon in the tray system for network connectivity was incorrect. He said always I am not connected to the network... but I am, because the internet works and I can still access the network drive that is located on another computer on the network and network printers.
Why is the system status bar tells me that I am not connected to the network when I am?
Any help will be greatly appreciated.
And Happy New Year.Rhys James
Hello
I presume that you have assigned the LAN TCP/IP address and gateway manually parameters and these parameters are not set to automatic. Am I wrong?
The same message appeared to me. I connected my laptop to the other PC and changed the TCP/IP address settings.
It was the reason of this message in the taskbar.All simply set it to auto again and you will get rid of this annoying message.
Best regards
-
Equium A60 - 181 und external monitor
Hi I have an Equium A60-181 with connected Ati graphics card in and monitor external 19 "CRT. While the monitor seems to work I ran into a few problems. By turning on the monitor XP prompted me to install drivers I assume that they are for the monitor in question sheet etc.
It seems in any case that I'm unable to change the resolution or refresh rate of the screen is set to 1024 x 768 @ 60 Hz. I changed the display properties and selected reverse, but when I OK/apply the cursor goes back to 1024 x 768 and the refresh rate is 60 Hz - huh?
I restarted XP and still have this problem I even Device Manager check for yellow markers so now I'm at loss here is a common problem with Ati?Any recommendations would be appreciated.
see you soon,
Richard S.
Hi Richard
I'm not 100% sure but I think that the resolution of 1024 x 768 max for external (second) monitor is restriction of graphics card. Is this the situation even if you use an external monitor just without screen laptop (FN + F5)?
-
What are the original applications for the iPhone 6 s. I had to sync to my iPhone 3g to my new 6s in order to maintain my contacts. Unfortunately, I lost a lot of these new applications. can someone please send screenshots of an iPhone running 6s with applications shown. I need pages other than the home page. Thank you!
'Stock' apps are part of the installation of iOS and cannot be removed, so there is nothing to verify or prove.
When you move to a new phone, just need restoring your old backup phone and compatible applications will be synchronized to the new.
-
I bought this new comp with windows 7 already installed. has worked fine up intill a week or two it y a. I installed a new game, and after installation, I press launch to play it and pop up with a message saying not sufficient privileges: you must be an administrator when you run this application for the first time. also, I thought that I must be the administrator when I tried to launch the disk defragmentation. my account is the administrator account so I don't understand why they say that.
I'm sorry. I was reading through additional FAQS regarding the same problem. I saw where someone said to try to add another admisistrator account to try to take on the former. but I had no luck with this ether. I also downloaded the program of the UAC, and I turned it off, reset my computer and still no change to my problem. I also tried to download the MSE restore tool, but I found myself with a message saying that I have no MSE
Sorry, the MSE tool is to set the MSE when its broken.
UAC controller Tool v1.0 can be used to control the
The UAC settings.However, I suggest you restart the PC and after BIOS hold the F8 key
and when the Windows Startup Menu appears, select Mode safe mode with networking.Now, you will enter Safe Mode. On the page to connect, you will see the
Standard Windows administrator click it to open a windows session, press and hold
in mind, the password can be blank.Once you have done that make a new account administrator and giv it a name.
Restart the PC. That you did this newspaper using the new account.
Once you have done that decide what to keep with your current administrator
account once you've done it restart the PC, BIOS hold down the F8 key and
Select Mode safe mode with network and enter dependencies the Standard Windows administrator.Go to control panel-> user accounts control and security for the family-> user accounts, then
Select manage another account. In the list, select the administrator account
your select and then delete the account, then it will ask you if you want to keep
files etc, it's your own decision. Itknowledge24.com -
I bought my free membership of creative cloud and installation of office for the use of the Institution. But accidentally uninstalled and deleted the program files. Now I can't update my apps and will pay for the installation of creative cloud. What should I do?
Reinstall the cc desktop application, https://creative.adobe.com/products/creative-cloud
-
Hello
I suggest you according to the question in this forum and check if that helps:
http://social.technet.Microsoft.com/forums/en-us/winserverDS
It will be useful.
-
LRT224 - how to have a free installation of LAG for the games
How can I get a free installation of Lag for the games in LRT224?
I already tried to give "High priority" ports used by games like Dota 2, heroes of the storm, etc., as shown below, but the latency is still high.
In our previous configuration with DLink LB604, we used the sticky connection and there is no Lag. We sticky Wan1 related game Ports and 2 Wan for Http and Https Ports.
Is there a way for Linksys have a free configuration of Lag? We use this router now Internet café with 40 customers.
Please help me how to reduce the latency/Ping times. Thanks in advance
If the router of games makes the QOS, then you must disable QOS in the LRA.
Sorry, Linksys has not approved the agreement of beta tester yet. I'll have an update.
-
How do you develop an application for the surface?
Ive some keen ideas on different types of applications for the Surface... what the process will be to do?
Start by this document and post back if you need further information, although I suspect you will find more help on the MSDN Forums for the development of the app.
-
is it possible to restrict access to a particular application for the particular user?
is it possible to restrict access to a particular application for the particular user
for example, if an application will not be editable for user mode
or it will be only editable for a user
We gave access as a developer of a workspace to a single user
but we don't want him to change a single application.
Oracle Application Express 5.0
Your terminology is mixed - looks like you're talking about limiting applications, a developer can edit in the application builder in a workspace.
No, you can't.
Maybe you are looking for
-
My iphone says "cannot connect to itunes store.
I was not able to connect to the itunes store, went to google, found process starting with the signing of iTunes, then re-signing in. Did it, but without a signature success! Password is correct, but get messgae "check failed: there was an error conn
-
Display failed on the Satellite P100-434 - need to change the boot order
HelloMy Satellite P100 suffered a failure of the display last night. I can confirm that the backlight is working but I do not get a display.I think it's to reach the windows logon screen, certainly the disc is rotating upward and if I plug an externa
-
Windows 7 - Error Codes: 8E5E03FA & 80246007 (cannot install will want to)
Windows updates continue to fail after repeated attemptd. Need help to solve the problem. I received error codes: 8E5E03FA and 80246007
-
change windows 7 to xp with none of the discs
my boy has loaded windows7 on the computer, it's now all Portuguese can return to windows xp pro? I found windows.old, but because everything is in Portuguese, I don't know what to do. any help please?
-
Devices and printers in Control Panel
After the judgment of my HP Deskjet F4580 impression, I uninstalled in the box devices and printers in Control Panel but before could not reinstall it. I downloaded HP Print and Scan doctor and it fixed my problem and the printer works now. (Yes!)