Application 'Tweed' increasingly greater and slowing down

I noticed the wire of time that my request of Tweed becomes slower and slower.  I just pulled up the application information, and it's an enormous size 17 024 Ko!  Apparently, this isn't clear all that there is storage when it is downloaded from Twitter.  I tried to delete the account and re-adjusting upward, but that did not bring the size down.  It seems I have to remove the entire application from my pre and reinstall it.

Anyone else notice these issues of size and slowness with Tweed?

Hi Silvrdrgn36

If you go into the menu of the Tweed application or any other application, there is a link to the support site or contact more details the author. I suggest that notify you these guys there on the issue - this is probably a memory leak in the code which they will determine if you can get the info.

http://pivotallabs.com/Contact_us

Tags: HP Tablets

Similar Questions

  • computer laptop HP compaq 6730 b freezes and slows down

    I have a laptop hp compaq 6730 b.

    Since a few days, I realized when I plug to charge my cell phone, it freezes finally and slows down.

    The CPU usage suddenly increases.

    What should I do?

    help please...

    Thank you

    It works ok with only the power adapter is plugged in and the battery out of the laptop? The battery charge ok if the laptop is turned off? The laptop works for a long time reasonable with just the battery?  I've seen this kind of problem with a Toshiba machine that used a NEC/CATHERINE 0E128 Proadlizer high switching frequency DC/DC Converter output capacitor.  I doubt that your computer has this chip but the problem and the function are similar.  It is a device surface and can cause the laptop to have a problem with the battery and the power adapter plugged in at the same time.  Many times this you will also charge the battery when the computer is turned off, but not when it is turned on. Sometimes it will not allow your to run Notepad with only the attached power adapter and the battery removed. Just to think.

  • Envy 17 3D: fan runs constantly and slows down the system

    My HP ENVY 17 3D laptop fan runs constantly and slows down the system. I reduced some applications in the Task Manager and also cleaned the fan most of the time. But keeps the noise and the fan continues to run. Please what do I do?

    Kelvin1 wrote:

    My HP ENVY 17 3D laptop fan runs constantly and slows down the system. I reduced some applications in the Task Manager and also cleaned the fan most of the time. But keeps the noise and the fan continues to run. Please what do I do?

    Means that your mouths and radiator has more than dust on them and the fan does not work correctly. You have to disassemble and clean the fan and vents to let him work again properly.

  • During playback the music through Windows its multimedia player breaks and slows down in XP. How can I fix it?

    During playback the music through Windows its multimedia player breaks and slows down in XP. How can I fix it? All the drivers are up to date.

    Hi EBmusic,

    I see that you have a published similar thread .

    ·         Have you tried suggested the same steps?

    Try the suggestions and see if it helps.

  • Sound stops and slows down after the installation of Microsoft Vista SP2

    Its malfunction after installing Microsoft Visa SP2

    I have a HP laptop. downloaded Microsoft Vista SP! and SP2.  Since installing the sound stops and slows down and jump to the high state that Adobe Player slows down the computer.  I remember checking the updates in the control panel and Microsoft Vista SP1 and SP2 has been selected and windows poped place provided a specific that warning after installation of SP1 and SP2, respectively, the user can experience sound defects or.  This window also provided a specific procedure to correct the problem of noise; However, I have noticed no procedure to revisit this window.  Need help, thank you!

    I have a HP laptop. downloaded Microsoft Vista SP! and SP2.  Since installing the sound stops and slows down and jump to the high state that Adobe Player slows down the computer.  I remember checking the updates in the control panel and Microsoft Vista SP1 and SP2 has been selected and windows poped place provided a specific that warning after installation of SP1 and SP2, respectively, the user can experience sound defects or.  This window also provided a specific procedure to correct the problem of noise; However, I have noticed no procedure to revisit this window.  Need help, thank you!

    Here's a thread on these forums on how to fix this: http://social.answers.microsoft.com/Forums/en-US/vistamedia/thread/f16247af-313a-418d-915e-6403012c25eb

  • When I play itunes and then play youtube... my sound goes all funny and fuzzy and slow down the movements of the computer? Any ideas?

    When I play itunes and then run youtube... my computer starts to gltch and slow down. Ditto for when I play a game it glitches and slows down every 30 seconds and gets really fuzzy... does anyone know the cause of this?

    Hi Judsonp14,

    (1) since when are you facing this problem?

    (2) remember to make changes?

    Method 1: You can follow the steps mentioned in the link below

    What can I do on the audio problems, such as popping, crackling, or sound that plays too fast or too slowly?

    Method 2: Let flow the fixit available in the link below and then check

    Playing video files crashes or blocking Internet Explorer or Windows

    http://support.Microsoft.com/mats/video_freezes_or_crashes/en-us

    Method 3: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

  • HP 2000 running win 7 32 bit freezes and slows down.taskmanager shows his works normally.

    my brand new hp 2000 crashes every time and slows down.the warranty does not cover my position as I bought abroad.

    He sometimes stops to up2 a hr and then she'll start working for alittle while only to freeze again.very frustrating.any helps apprecieted

    Hello

    I suggest always back up your personal files, etc. before you try the following procedure.

    Shut down the laptop.  Tap away at f10 you start Notepad to open the menu of the bios.  Under Advanced Options or diagnosis tab, you will find the possibility to run tests on the hard drive and memory.  Post back with the details of any error message.

    If the criteria above, try the following.

    In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

    sfc/scannow                (Note that there is a space between sfc and /)

    Let the entire process, then the output type and press ENTER.

    Then, click on the Start Menu, click computer, left click Local disk C once to highlight, right-click Local disk C and select Properties.  Click the Tools tab and then click on the button "check the drive for errors.  In the next window make sure that both boxes are checked, then click Start.  Right plan the audit on the next reboot of the system, and then restart the laptop - this process can take several hours before the load in Windows.

    Kind regards

    DP - K

  • Computer, speed up and slow down

    When my computer is turned on, which is practically all the time, I guess it's the rear cooling fan, but permanently, it slows down and accelerates

    and it's driving me crazy.  Most of the time when I do not use, I just stopped him.  I was wondering if anyone has any suggestions

    what I need to do.  Thank you

    Hi smileyboy,

    Fans generally increase speed (assuming you have a temperature fan control chip) when the inside of your box reaches a certain temperature. Once the heat has been dispated the fan speed will reduce again. This is what normally happens. If the fan speed is monte and descends without particular reason so it could be the chip temperature is causing the problem or the fan may be faulty. anyway a repair technician would need to watch it.

    Before you do this, however, try to open the case. I guess that we are talking about a desktop PC? If it's a laptop take it to a repair shop, access to the fan in a laptop is quite difficult if you don't know what you're doing. As I said, if it's a desktop computer, remove the side panel (initially with the machine turned off - remove the plug of the power supply and the rmemeber to yourself before you touch anything inside the Earth). Now look at the fans. Is there an accumulation of dust/dirt on the fan blades? If so gently brush the dust with a small artist, own brush. Check also on the processor heat sink. If dust has accumulated in the heat sink tips then purge with a can of clean air. Try running the machine with the cover to see if additional air flow solves the problem. Your PC may be overheating causing the fans speed up to cool thing down. Listening to the fans to see if you can isolate which fan is the source of the problem. You'll have a fan on top of the CPU (porcessor); You can also have a hood on the back of the case. Another fan is located in the power supply (power supply). Power supply fans, however, must be examined by a qualified technician.

    John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

  • Multiplex redo logs and slow down the e/s

    I sometimes use a San that gets saturated by a another client that I have no control over. My recovery on is newspapers the SAN and it causes all my customers to save waiting for synchronization of log file when it arrives. My overall IO is low, but customers commit frequently. In this scenario, I have no control over the San or other customer behaviours.

    What I'm considering is multiplexing by newspapers of recovery more fast local disk, but leaving a member of newspaper on the SAN because these discs are less likely to fail purely and simply.

    My question is how Oracle will behave during the SAN slows down - it will deal with the posting as 'fact' when the first newspaper finishes member in writing, or the last? I know that if writing an error then just Oracle will mark this member as dead, however in this case I get no errors, some delays.

    Edit: I have no control over the San or its configuration as well, I just have to work around the problem, while SAN team working on it.

    Published by: jhmartin1 on April 7, 2009 15:55

    Write completion wil be when more destinations slow two members signals, that Scripture is complete.

    Other thoughts.

    For a San, I expect to be when writing reaches a battery backed cache. So think of it as no adaptation write cache can be useful.
    You can increase the cache to write to your San?

    Obviously writing half as much for the san that can help.

    Make sure you use the SAME guidelines [http://www.oracle.com/technology/deploy/availability/pdf/OOW2000_same_ppt.pdf]

    Check if the problem is caused when backups are.

    Check a second time SAN and SUN firmware is up to date and ensure that best practices for san are respected etc.

    -I think that there is a problem for sun solaris I try to drag in the back of my mind by which a series of small writings are not well on the most massive. But Ithink that is direct attached tables and there is a workaround.

    HOEP this helps, bigdelboy.

  • Problem with Youtube, whenever I put on the music and then open a youtube online game software seems to stop responding and slow down a lot, what could be causing it? someone else who suffer?

    YouTube seems to slow down or respond not at all when I try to open a game I have to reduce to a minimum in order to return on youtube.

    My computer is very fast and has a lot of memory, but youtube still can't handle it. works fine on any other Web site and video files.

    Your Plugin Module Aosmgr and npmkd25aos, shown in the details of your system, seem to be regular sources of problems. Try Googling.

    If disabling or coming out does not work, I would also do the same thing with Zeon PDF Plugin for Mozilla. There could be a conflict.

  • Updates from HP agent... always began in the early and slows down computer

    HP Pavilion a1222n, Win XP Home

    When we move first on the computer, it is slowed down by "updates HP agent running' controlled by the Task Manager.

    I would like to disable the execution the present automatic and run it when I want to run the updates from HP.  I read in another post to go to start > all programs > setting > select never allowing you to a chosen when run the HP update agent.  I can't seem to find it on this machine, the message I read was for another model.

    Thank you

    Ron3033

    Hi Ron,

    Try the following.

    Hold down the Windows key and press R.  In the run box, type msconfig and press to enter.  In the System Configuration window, select the Startup tab and Remove the check mark next to the HP update agent.  Click apply and then click Ok to save the changes and restart the PC for this change to take effect.

    Kind regards

    DP - K

  • Latest Vista updates have picked up my use of the internet and slowed down my system

    Last week, I had several automatic updates. In the meantime, updates have been loading on my computer all landed and froze. After the updates, I'll have a terrible time in AOL. The program has slowed down and often gives me an error message that the system is not responding. I contacted AOL who gave me many suggestions that I follow, but I still have problems (more my overall system is slow now). Says to contact Microsoft. It may be a problem with acceleration. I don't have these problems until the updates installed this week.

    Now my system restore no longer works. I can't go back to before the updates. What can I do?

    Hi andrewgpig,

    Thank you for writing to Microsoft answers Community Forums.

    Possible cause would be that updates might conflict with other programs on the computer. Also could have damaged some system files on the computer.

    I suggest to try in safe mode and check the performance of the pc first.

    To start the computer in safe mode, do in the link below

    http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

    If it works fine in safe mode, then find the program that is in conflict. The link below shows you how to do a clean boot

    http://support.Microsoft.com/kb/331796

    If the steps above fail. Try to do a scan sfc

    Try to run a SFC scan, to do this, follow these steps:

    Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

    Type the following command and press ENTER:

    sfc/scannow

    The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

    I hope this helps. .

    Let us know if this doesn't work or if you need further assistance.

    Kind regards

    Sharath

    Microsoft Answers Support Engineer

  • scvhost.exe netsvcs high memory (1 GB or higher) and slows down the pc

    We have seen several cases in our business where scvhost.exe - the netsvcs used a large amount of memory on computers. I understand that many services under this one. We cleaned wbem folder to see if that fixes it, but also erased the event logs and have not seen a will. What is strange, is that even on a system with 4 GB of ram, even if netsvcs uses 1.5 GB of ram and the system uses 1 GB that leaves 1.5 GB available. I do not understand why windows will slow down to so much to become sometimes unusable if it still has 1.5 GB of ram available. The processor is very well. I've had people restart and he made disappear one day, sometimes 2 or even a week before it slips back to the top. Under the resource monitor if I highlight scvhost - netsvcs on the memory tab, it does not divide which is to use it. I can go to the disk tab and highlight it and I can see which processes are slot there for what is written on the disc, don't know if this is useful, but in the diagnosis.  Any thoughts?

    Hello Dave,

    Please keep us updated.

    Because these computers are connected to the domain network, I would recommend to post your question in the TechNet Forum because your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for COMPUTING public Pro on TechNet forum.

    Please post your question in the TechNet Forums.

  • IOS Firewall feature set and slow down access HTTP...

    Recently turned on the firewall, on a router, and often feature some

    Web sites are rather slow. I tweaked the ip inspect max-incomplete and

    one - minutes, but the problem persists - deletion of IP inspect and these

    command solves the problem.

    ANY ideas on how to fix?

    Sincerely,

    Daniel Melameth

    You inspect http traffic in particular? If Yes, I would like to remove this and just inspect other protocols and tcp and udp in general. Inspection of http is really useful if you want to stop the Java applets arrive, which to be honest, that almost person does. If you do not have something like this, remove the inspection of http as it slow down considerably.

    That said, 12.2 (8) T has had a lot of performance improvements put into it for the CBAC specifically, you can also try the upgrade than or later to see if it solves the problem also. See http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t8/ftfirewl.htm

  • Satellite L850 - 1-5 - no battery not detected and slow down the orange light flashing

    Hello

    I'm helping a friend with a problem with its Satellite L850 - 1 5.

    No battery detected is report to Windows, and the light on the front of the machine of battery flashes orange slowly.

    I saw a few forums suggesting removing the power and the battery and holding down the button for 30 seconds. I tried a few times and seems not to have had any effect.

    Is there something that can be done, or is broken for good battery?

    Thank you
    James

    Remove the battery and start your laptop with AC power only. What happens when you put the battery in place when Windows is fully charged?

Maybe you are looking for

  • How can I get the contacts on my iphone6

    Had a problem today on my Mac. As a result of measures taken to solve the problem on my Mac my contacts quadrupled on all my devices. I fixed the Mac, but when I turned off the contacts in iCloud on my iphone6 to solve the problem, he deleted all the

  • NB100: How can I get ACPI working under XP

    Hello world I wonder how I can get ACPI working under XP.When I enable it in the BIOS, Windows will not start... Should I load the drivers during the installation of Windows XP? That would lead me to my next problem, because the command line switch -

  • Do a right click in the Project Explorer is sometimes slow

    I have a big project of the AF with a lot of classes and libraries. I only really use these two (lvclass and lvlib) to structure and organize the project. Right click on VI sometimes takes a terribly long time to load, say up to 10 seconds, depending

  • HP Envy 4-1001tu: HP Envy 4-1001tu brightness and Volume buttons - no animation

    Hi all After fishing trawl of the internet, I did find a solution to this. I have to sort the Beats button using the software of HP Quick Launch, based on this thread. After you perform a new installation on the laptop, the final volume and brightnes

  • How to download the upgrade for windows 10

    I have Windows 7 SP1 Home premium, when I click on the link to upgrade to 10 windows it gives me a link to download windows 7 ISO. Why do I need win 7 ISO when I have already installed? How to get windows 10 then, I do not understand?