Applications have become inactive for a period of time every 10 seconds until I re - click

Similar Questions

• NULL pointer when the application is inactive for a period of time

  I am often faced with the question, whenever I have keep my idle browser for a while and that too for less than 5 minutes. I get under exceptions

  < XmlErrorHandler > < handleError > ADF_FACES - 60096:Server Exception during the PPR, #1

  oracle.jbo.JboException: Houston-29114 ADFContext is not configured to process this exception messages. Use the code of exception stack trace and error to investigate the root cause of this exception. Root cause error code is Houston-29000. Error messages settings are {0 = java.lang.NullPointerException, 1 = null}

  at oracle.jbo.server.ViewObjectImpl.activateNewRowTracker_Bug13440096Fix(ViewObjectImpl.java:20268)

  at oracle.jbo.server.ViewObjectImpl.activateNewRowTracker(ViewObjectImpl.java:19138)

  at oracle.jbo.server.ViewRowSetIteratorImpl.activateIteratorState(ViewRowSetIteratorImpl.java:3969)

  at oracle.jbo.server.ViewRowSetImpl.activateIteratorState(ViewRowSetImpl.java:7554)

  at oracle.jbo.server.ViewObjectImpl.activateIteratorState(ViewObjectImpl.java:20802)

  at oracle.jbo.server.ApplicationModuleImpl.activateVOs(ApplicationModuleImpl.java:8497)

  at oracle.jbo.server.ApplicationModuleImpl.doActivateState(ApplicationModuleImpl.java:8231)

  at oracle.jbo.server.ApplicationModuleImpl.doActivateAMState(ApplicationModuleImpl.java:8197)

  at oracle.jbo.server.Serializer.activate(Serializer.java:317)

  at oracle.jbo.server.DBSerializer.activateRootAM(DBSerializer.java:330)

  at oracle.jbo.server.ApplicationModuleImpl.activateState(ApplicationModuleImpl.java:6328)

  at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolMessage(ApplicationPoolMessageHandler.java:225)

  at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:9316)

  at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:4530)

  at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2460)

  at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2270)

  at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3169)

  at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:592)

  at oracle.jbo.http.HttpSessionCookieImpl.useApplicationModule(HttpSessionCookieImpl.java:234)

  at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:525)

  at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:520)

  at oracle.adf.model.bc4j.DCJboDataControl.initializeApplicationModule(DCJboDataControl.java:523)

  at oracle.adf.model.bc4j.DCJboDataControl.getApplicationModule(DCJboDataControl.java:869)

  at oracle.adf.model.binding.DCBindingContainer.findDataControl(DCBindingContainer.java:1648)

  at oracle.adf.model.binding.DCIteratorBinding.initDataControl(DCIteratorBinding.java:2479)

  at oracle.adf.model.binding.DCIteratorBinding.getDataControl(DCIteratorBinding.java:2423)

  at oracle.adf.model.binding.DCIteratorBinding.getCheckedDataControl(DCIteratorBinding.java:2508)

  at oracle.adf.model.binding.DCIteratorBinding.executeQueryIfNeeded(DCIteratorBinding.java:2167)

  at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3253)

  at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2883)

  at oracle.adf.controller.internal.binding.TaskFlowRegionController.doRegionRefresh(TaskFlowRegionController.java:253)

  at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:119)

  at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3211)

  at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2883)

  at oracle.adf.controller.internal.binding.TaskFlowRegionController.doRegionRefresh(TaskFlowRegionController.java:253)

  at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:119)

  at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3211)

  at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2883)

  at oracle.adf.controller.internal.binding.TaskFlowRegionController.doRegionRefresh(TaskFlowRegionController.java:253)

  at oracle.adf.controller.internal.binding.TaskFlowRegionController.refreshRegion(TaskFlowRegionController.java:119)

  at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3211)

  at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2883)

  at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareModel(PageLifecycleImpl.java:113)

  at oracle.adf.controller.faces.lifecycle.FacesPageLifecycle.prepareModel(FacesPageLifecycle.java:359)

  to oracle.adf.controller.v2.lifecycle.Lifecycle$ 2.execute(Lifecycle.java:137)

  at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:197)

  at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.startPageLifecycle(ADFPhaseListener.java:203)

  to oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$ 1.after(ADFPhaseListener.java:377)

  at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:88)

  at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:53)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:520)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:207)

  at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)

  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)

  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)

  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at com.boa.fast.ipoe.common.view.filter.SessionFilter.doFilter(SessionFilter.java:89)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:128)

  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)

  at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)

  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)

  at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

  at java.security.AccessController.doPrivileged (Native Method)

  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)

  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)

  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3715)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3681)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

  Caused by: java.lang.NullPointerException

  at oracle.jbo.server.ViewObjectImpl.activateNewRowTracker_Bug13440096Fix(ViewObjectImpl.java:20133)

  ... more than 92

  # # 0 in detail

  It happens more often or faster?

  If Yes, your application module is not activation/passivation record and you have to know exactly where and to fix. It's that we cannot tell you exactly where. You might find JDev: always Test Your App with the regrouping of ApplicationModule turns off | JDev & amp; ADF Goodies useful.

  Then you can try to find a pattern when that happens, for example, what happens if you start the application and don't do anything, just wait? The error happened to you then?

  Stacktrace shows

  at com.boa.fast.ipoe.common.view.filter.SessionFilter.doFilter(SessionFilter.java:89)

  who is one of your filters. Maybe there is a problem?

  Timo

• I keep losing my taskbar when my laptop goes to sleep or is inactive for a period of time.

  I checked for if ensure auto-hide is not selected...                 Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  HI m_buneo

  First of all, make sure that you have installed the latest drivers.
  Problems of lack of the taskbar ---> having similar problem and solutions.
  If still persists
  Create a new Admin account and check the issue.
  Best regards
  Nikhil

• Up to version 7.01 FF ever hanged, but with 7.01, after having not used for a period of time (hours or less), it crashes. No solution except again?

  Up to version 7.0.1 but never crushed/hnag, FF with 7.0.1 after you have not used for a period of time (hours or less), it crashes. No solution except again?

  Upgrade your browser Firefox 8 and try

  • getfirefox.com

• Satellite 2450-201: OS seems to remain inactive for a period

  I've had my computer for about 4 years now, and while I understand that the system can start to not work properly, I was wondering if there is any way to fix the following problem.

  I formatted the hard drive using the software recovery on more than once and the computer still does not work how it is used for. It seems to stay inactive for a period and then work. There is no error message displayed and when it works, it seems still process information at a rapid pace.

  I was wondering if there may be perhaps reset regardless of the settings are not changed to factory settings when the format is done.

  It is really frustrating, are waiting for the computer to run a process at leisure aparent, help!

  Hello

  If you have installed the OS from the Toshiba laptop recovery CD was created to back factory settings!
  I think that the laptop hangs for a while during the access to the data on the HARD drive!
  Try to defragment the HARD drive and use some cleaning as TuneUp2007 tools!

  What to say that the laptop is 4 years then maybe the HARD disk performance slowly descends!
  This is not unusual, and finally, after a long period of use, the HARD disk may damage!

• Silent mode - for a period of time only. After update to Android 6.0

  Hello

  Cannot know how to silently for a more predefined period of time. Marshmallows before we had the choice to put this silent mode should just modified for the next 30 minutes, two hours etc. It is a very nice feature for me, because too often I forgot to turn on sounds after a meeting.

  Before this feature came in the Android, I used an app that defined silent mode with a timer. Do I have to re - install an application like that?

  I found where you can set (by chance) all trying to solve my problem.

  If you access do not disturb in the menu drop-down (if it is not there then it is one of the icons you add to the grid) when you select the option it offers the possibility of no end or for a period of time time.

  I am happy I found it too since I also use it when I go to meetings.

• How to run a framework for a flat structure of sequence for a period of time?

  Hello

  I have a loop timed measuring a resistance value every 2 seconds. I wish I had this loop timed to run for a period of time (5 minutes). The timed loop itself is placed within a flat sequence so I fear that the measure will be taken once and the next picture will begin to run, without wait 2 seconds for a successive reading (and not a loop for, say, 5 minutes).

  In other words, is it possible to have a flat sequence structure frame run for awhile before moving on to the next image?

  Thanks for your help!

  JFK_Aero

  All code within a sequence must complete before can execute the following image.  So until your timed loop is configured correctly, the following image may not run until your 5 minutes is up (N = 5 minutes / 2 s/measure = 150 steps).

• U2415, artifacts monitor after power off for a period of time. Solved by allowing the DP1.2

  U2415 - artifacts monitor after power off for a period of time

  I'm running Win 8 Pro 64 bit, Asus GTX 760. Connected to the U2415 using the miniDP to DP cable.

  It is: after turning off my monitor for a period of time (PC fixed IT), 2 hours or more, after turning it back on, I see lines on the screen.

  I will need to restart the PC for it to be back to normal.

  It will not happen if I turned OFF the monitor for a short period. Only when I turned OFF for a few hours.

  Any ideas? Thank you.

  I downloaded a video on Dropbox. I had it turned on after turning off for about 3 hours.

  [See:www.dropbox.com/.../U2415.mp4]

  Hi Chris, just an update.

  A local forumer had discovered how to solve.

  It was the scene of DP1.2. By default, it is set to "Disable". After that I put to 'Activate' and test it for 2 days, everything seems fine now.

  Hopefully someone will find this useful.

  Thanks Chris.

• I have a problem with IBM Lotus Symphony - the program crashing several times every 5 seconds

  Original thread - I have a problem with IBM Lotus Symphony.  I am trying to edit a document, and I can't get any task done without the program crashing several times every 5 seconds.  What can I do to fix this?

  The program crashes every 5 seconds.  I started having this problem last night, but I didn't even know that first of all, there was a problem until today.

  Hello
   
  
  You receive an error message/code when you edit a document in IBM Lotus Symphony?
   
  
  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.
  Note: when you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.
  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.
  If the problem persists please contact the IBM Lotus Symphony support for assistance. See the link below.
  http://www-03.IBM.com/software/Lotus/Symphony/ForumnsHome.nsf/home
   
  It will be useful.

• mouse/key locks board increase after computer idle for long periods of time. any Advisor

  I'm having a problem with windows lock-up during idle time.  If I leave the computer for a period extended by time, most often but not always my computer crashes. In other words when I get back, my mouse or my keyboard doesn't work at all. If I left open with unsaved information programs, I lose this info because as my only alternative to get operational again is to shut down the computer manually. Can anyone provide me a help or possible solutions in order to avoid gels of this nature?

  Thank you for your help.

  This is possibly due to a slow computer errors and registry. I recommend the following.
  CCleaner - will remove the unnecessary files that you don't want

  Step 1. Download Ccleaner from http://www.piriform.com/ccleaner/download/standard
  Download it, run the file install Ccleaner, then open Ccleaner.
   
  Step 2. Click run cleaner once you have checked all you don't want on your computer. This will clean up unnecessary files, you don't want to. CCleaner also comes with a registry cleaner.

  Step 3. To run this registry click on the left side of the window, and then click scan for issues, difficulty of the selected questions, click on no to the box that opens, and then click fix all selected issues. This should clean all files that is no longer usable.

  Defragment your drive hard by: Windows Defragmenter to help. I use defraggler from the makers of Ccleaner because it defragments the individual files.

  If problems or questions please answer.
  Answer if you want to know how to install defraggler too!

• Storage/not using the printer for a period of time extended

  I have a Photosmart 6520 printer which is not used for a period of 6 months each year.

  The last time, I removed the cartridges and stored in an airtight container. When the reactivation of the printer, it has no print at all, but after many attempts to clean and/or align the print heads, he is slowly back to normal operation.

  My question is: what is the best ink cartridges must be left in the printer or deleted during this period?

  It is best to leave them in the printer. Once these special cartridges have their orange shipcap removed, I always recommend to leave in the printer, if you go to the store for a while.

• Can I take some images from a video for a period of time?

  So, I was filming a time to build myself a bed flat pack.  Initially I started with a delay of 5 seconds on my go pro, but at halfway, I went for lunch and stopped the time.  On his return, I stupidly clicked on play and didn't go pro gave to the video recording mode.  So I have half my time elapsed as a photo, taken at intervals of 5 seconds, and the other half in 1080 p at 60 frames per second.  Is it possible that I can take a cap of a single image of the video screen every 5 seconds (or every 300 images or more) to make it so the same format as the first part.  I don't want to do this manually because this way, I would have about 50 minutes of video to sift through.

  See you soon.

  A viable method is to:

  1 apply a posterize time effect to the clip and set the framerate 1FPS

  2. use speed/duration (right click on the clip) and set a pace faster or the shorter duration - a few mathematical functions required: new duration = duration of the clip in seconds / 5 (since you wanted to 5 seconds interval) / frame rate of the project.  for example 50 min = 3000 s;  3000/5 = 600 (or images) / 30 fps = 20 seconds.  Think math is right.

  See you soon

• After the server running for a period of time, get connection errors

  Hi all
  
  We meet a few serious problems during the performance tests.
  Its does not occur with WebLogic 10.3 and does not occur with connections of type oracle.jdbc.driver.OracleConnection.
  
  After the test, the server fills up with the following exceptions...
  
  < 9 October 2009 15:34:17 IST > < WARNING > < JDBC > < BEA-001129 > < receipt exception creating connection to pool ' jdbc/sdoPool': IO exception: the network adapter could not establish the connection >
  
  
  Here is the configuration of the jdbc/sdoPool:
  Driver class name: oracle.jdbc.OracleDriver
  -> Properties
  user = SOL_ISMART_USER
  Class = Oracle.JDBC.pool.OracleConnectionCacheImpl
  Protocol = thin
  Initial capacity: 1
  Maximum capacity: 100
  Capacity: 1
  Delete the infected connections
  
  
  
  Code to get the connection...
  DataSource data source = null;
  
  VR;
  {
  dataSource = (DataSource) ctxt.lookup ("java: comp/env/jdbc /"+ poolName ");
  }
  catch (NamingException only)
  {
  dataSource = (DataSource) ctxt.lookup (poolName);
  }
  
  Connection Conn = dataSource.getConnection ();
  
  OracleConnection vendorConn = (OracleConnection) ((WLConnection) conn) .getVendorConnection ();
  
  vendorConn.setClientData ("LOGICAL_CONNECTION", conn);
  
  Return vendorConn;
  
  
  Here is my code to close the connection...
  If (con instanceof OracleConnection)
  {
  If (((OracleConnection) con), .getClientData (C_LOGICAL_CONNECTION)! = null)
  {
  Connection logicalCon = (connection) (con (OracleConnection)) .getClientData (C_LOGICAL_CONNECTION);
  
  connection - defense against leaks of output connection
  (Con (OracleConnection)) .setClientData (C_LOGICAL_CONNECTION, new Object();)
  
  logicalCon.close ();
  logicalCon = null;
  
  con = null;
  }
  on the other
  {
  con = null;
  }
  }
  on the other
  {
  If (! con.isClosed ())
  {
  con. Close;
  }
  }
  
  
  
  Any advice / help greatly appreciated.
  
  Ronan

  The DBMS does not give new WebLogic connections when running. Try to set
  the initial capacity of the pool to 35 and the login delay to 1, so the pool
  makes 35 connections at startup, one at a time, with a delay of 1 second
  between each of them. (The DBMS can sometimes get overloaded if it becomes too
  connection requests in a short period of time and don't miss some people).

• After the upgrade to Firefox 9 browser frequently hangs for a minute or two, becomes white and says (not answer). Updated in ff10-yet it - only for long periods of time.

  I'm on Win7, I tried to delete the places.sql that has been suggested here - it doesn't have to be in this version of ff, because I can't find it and YES, it still happens in safe mode.

  Never mind. Still cannot find places.sq, but just for the heck of it, I was looking at solutions crash here, even if it is not a case of shock and decided to try a new profile. So far, seems to work ok. If this isn't the case, I'll be back with another answer!

• the iPhone screen is not responding and only works for short periods of time when I use siri for an indefinite period.

  Then my phone 3 days ago started having a screen is unresponsive. I just found someone else who has the same problems as me. My screen is white and gray, flickering vertical lines at the top of my screen, sometimes extending to the bottom of the screen. My iPhone 6 s more screen shows only these lines when I use Siri for what it is, which is a little strange. To make things even more bizarre my screen becomes sensitive occasionally, but only when I'm talking about Siri for an indefinite period. One of the things I had in common with a question that someone asked who had similar problems that me was that, when these lines flickering, vertical, white and gray, the iPhone will eventually type things randomly on its own. Such as random apps or opening of the things randomly without my intervention. A unfortunate thing is that when this happens it selects things like that to end a call or facetime. I already know that the cost is $329 remedy since its considered as "other" in the apple repair options and I am also out of warranty, so I wanted to know if there is any other explanation for this. It made my phone very difficult to use these days now...

  Im going to guess that your phone is actually a 6 + and not a s 6 +, which means that your phone is suffering from simple plu epidemic of iPhones of all time - to the epidemic ic touch.  It is unrelated to Siri and tricks of the 'home', the lack of contact button that gets worse with time and flashing bars gray is the presentation of the default signature.  It's a failure level Council of integrated circuit chips that control touch and it is a design flaw in the jury of 6 + that Apple does not recognize.  You can send for microsoldering of the Board of Directors to resolve the underlying anomaly for half of the cost of your options at Apple--assuming that you are not interested in protecting your out of warranty at Apple options.