Apply a profile to host several guests to csv

Similar Questions

• (RE) Apply profiles to host with PowerCLI

  Hi guys.

  I have two clusters in VCenter each with its own host profile.  Recently, I made a change in profiles and wanted reapply them for my guests.  When I do it manually, it goes without a hitch.  Profiles of already implemented at the cluster level.  When I used PowerCLI, it works beautifully on a cluster and VMOTION ROMPT the other! I tried two different methods.

  Method 1 should simply use the profile already registered for each host on the server.

  SE connect-VIServer vcentername

  Get-VMHost | {ForEach-Object

  Game-VMHost - VMHost $_-maintenance of State

  Apply-VMHostProfile-entity $_ - confirm: $false

  Game-VMHost - VMHost $_-connected state

  Test-VMHostProfileCompliance - VMHost $_

  }

  When it bombed the Group 2, I thought he might try to apply the same profile at a time, so I tried this. Note that the profile names matching the names of cluster for self-documenting.

  SE connect-VIServer vcentername

  Get-VMHost-location cluster1. {ForEach-Object

  Game-VMHost - VMHost $_-maintenance of State

  VMHostProfile-apply-profile cluster1-entity $_ - confirm: $false

  Game-VMHost - VMHost $_-connected state

  Test-VMHostProfileCompliance - VMHost $_

  }

  Get-VMHost-location cluster2 | {ForEach-Object

  Game-VMHost - VMHost $_-maintenance of State

  VMHostProfile-apply-profile cluster2-entity $_ - confirm: $false

  Game-VMHost - VMHost $_-connected state

  Test-VMHostProfileCompliance - VMHost $_

  }

  Both have the same result. CLUSTER1 works like a charm.  Cluster2 bombs as a nuke!

  Any help would be much appreciated.

  Derek

  So, what is the error you get when you apply the profile of the host to the Cluster 2? Or no error PowerCLI but vMotion fails once the profile is applied? I'm breaking vMotion terms, what do you do to fix?

  In terms of PowerCLI, there is not much to break, then it may be a problem with the profile files or answer potentially.

• Error in profile after host controls can be updated.

  I recently applied ESXi550-201505002 (may be updated) all of my host and now my profile checks host will not work. I have attached to creating a new profile of the host and also update my profile existing and still no joy. The error I get is "chess against host profile: unexpected error, compliance: no object Type isn't iterables.  I Googled it many different ways and I tried a bunch of different solution attempts. Can anyone shed some light on this for me?

  Thank you in advance.

  
  

  OK, problem solved. I thought that I would update just in case someone encounters this situation in the future.

  Our ESXi host for security reasons must be on their own segment without access to any other domain joined machines... except vCenter of course and they do not have direct access to the domain controllers or DNS (we have a file local host on each host computer referencing the other ESXi host). In our host profile DNS is not configured, but apparently something with this most recent update did not like that and that it is 'unknown' when you try to run a compliance check. I could always apply a profile of the host, not simply check that she was entirely consistent thereafter.  So basically, I edited the host profile to include not "DNS Configuration", located in configuration Networking--> NetStack Instance--> default TcpipStack--> DNS configuration. Once I did all the checks came back normal and showed consistent.

  Take care.

• Title of the OBIEE report based on several guests

  Hi gurus,
  
  We have a requirement of obiee where we give the title based on the Prompt values selected several guests
  
  We have guests for the region, subregion, Country, market
  
  If the user just selects the Europe area and click on apply, then title should have values of the region as a "reseller for Europe."
  If the user selects the region and subregion Europe and Central, then title should be "dealer for Central.
  If the service selects the region, subregion and country as Central Europe and America "title should have 'Reseller for America'...
  
  Like this
  Is it possible to achieve this in OBIEE
  
  Thanks in advance for your help.
  Lakshmi.

  Hey Lakshmi,

  By title, if you mean the title of your report you can use the approach below:

  -use a narrative mode to hold the title of the report.
  -Add another report column and add a statement box that would hold the prompt value that has been selected. To do this, first create variables of presentation for all columns in the command prompt. For example assume for the region, the SugRegion, the country and the market you create 4 variable presentation, namely - varRegion, varSubRegion, varCountry and varMarket.
  -Now, the case statement in the fx column would be

  case
  "When ' @{varMarket} {defaultValue}' <>'defaultValue' then ' @{varMarket}"
  "When ' @{varCountry} {defaultValue}' <>'defaultValue' then ' @{varCountry}"
  "When ' @{varSubRegion} {defaultValue}' <>'defaultValue' then ' @{varSubRegion}"
  "When ' @{varRegion} {defaultValue}' <>'defaultValue' then ' @{varRegion}"
  else 'No value Selected' end

  -Then, hide this column and reference in the narrative view and make lines to display as 1. Assuming that this column is in first position, in narrative mode, you can mention it as:

  Dealer for the @1

  I would like to know if that's what you're looking for.

  Thank you

• Exclude the host and guests of vFoglight

  I would like to know if there is an easy way to exclude a single ESX host and guests of vFoglight. I have a crowd noisy lab (w / 40 guests) I want to exclude from dashboards, alerts, reports, etc.
  Is there a simple way to do this?
  We run vFoglight Pro 6.1, build 5.5.4.4
  Thank you very much
  Tristan

  The response of a search engineer - Administration - power outages.

  Here you can configure a power failure permanent alarm or data collection in cluster or datacenter (or many other types of target.)

• Can I use an antivirus on each of my hosts and guests at the same time when running a virtual environment on my PC?

  I have Windows 7 running on my main computer at present and that you have a virtual environment installed as an operating system on this computer very.

  I would like to know if I am able to run an internet security on my pc (Windows 7) host program and other internet security on my guest in my virtual environment operating system (pc windows 8)... at the same time.

  I ask this question because... I installed my OS of windows 8 in a virtual environment running inside my Windows 7 OS in order to familiarize yourself with the features of windows 8 and to test the compliance of windows 8 with various hardware components I use... to satisfy my curiosity before I migrate eventually completely to windows 8.

  Part of my tests would involve various software including Internet security applications.

  So the question is... I was able to save my virtual environment with an Internet security program, while having an Internet security program running in the host computer?

  PS my environments hosts and guests are not put networked with the exception of the common external drives and dvd burners. The plan being that the Internet security on my host computer program will have my analysis excluded virtual environment.

  Yes

  The systems are completely separated from each other, will not affect the different AntiVirus on another product.

  If you decide to test another Internet security program don't forget to completely remove the old version on the virtual machine

• Lightroom does not apply lens profile automatically

  Hello

  I use Lightroom CC based on MacOS.

  Unfortunately, Lightroom does not apply the profile of my SIGMA 150-600 mm F5-6. 3 DG OS HSM p014 in development mode, but shows the lens correctly in library mode. All other lenses (CANON) are applied automatically, so it seems that I have a configuration problem. Lightroom shows that the profile cannot be detected automatically and cannot be applied. In the list of lenses, I can choose the target and that the profile is applied.

  Support said that this target is not supported. I can see the attached list of the answer all lenses supported by lightroom. And guess what, the lens is in this list. Detective Conan.

  So the support team has done a worse job, and did not check the list. I described that I can choose manually, but the response above was the answer.

  Any ideas how a.) the coup support team for doing their job and b.) help me with my problem.

  Thank you

  Peter

  After selecting the right lens manually, try this:

  

  This should fix it in the future.

• Cannot drag-and - drop between host and guest

  12 workstation

  Host = 10 Pro x 64 Windows

  Comments = 10 Pro x 64 Windows

  Everything is entirely up to date, etc. on a Z87 PC chipset.

  I can copy and paste. I can drag-and - drop comments to the host.

  I can't drag-and - drop between host and guest! lol I just get that bar circle icon.

  I'm totally stumped! I tried a myriad of common things...uninstalled/reinstalled VMWARE, then Tools, then even tried to create new guests. I do not have eccentric tweaks or customizations. It is a desktop PC that I use for a laboratory test and my business. I have no other problems in addition to this. Yet, on my other system, essentially a nearly identical configuration, I don't have this problem.

  Any suggestions?

  SOLUTION FOUND!

  The problem boils down to a matter of RUN AS ADMIN. On the HOST problem, it has been set to RUN as administrator. I've not done this! He has just installed that way automatically. Once I stopped that and it ran normally, all was well again. Read below for more details.

  I have two virtual HOST machine configurations almost identical - we'll we'll call HOST 1 and HOST 2. HOST 2 works perfectly without a problem. Drag and drop, to navigate to drives mapped to access NAS stored VMs, etc...

  I began to compare what was similar vs. different between the two. On HOST 1 (problem child even as I could slide properly - drop on), I noticed that I could not navigate to my NAS location where some virtual machines are stored. In the left navigation panel, the mapped drives would appear as drive letters with question marks next to them as you can see in the image below.

  

  I deleted the mapped drives then mapped them still fresh, did an other CLEAN uninstall VMWARE WS PRO 12. I combed the registry, records and checked for devices hidden in Device Manager. Clean as a whistle! I reinstalled 12 Workstation and returned the problem! I could yet drag-and - drop properly or navigate to mapped drives. Then I noticed the HOST 2 that he was not being RUN as administrator. Really? So, I removed this parameter and TA DA! Everything started to work properly. I don't know if it's a bug, or knowledge common to others but for me it was new. I don't know why, by default, when installing 1 HOST went down VMWARE to run as administrator, but it was.

  Bottom line - do not run VMWARE as an administrator.

• Difficulty ping between the hosts and guests

  Hello

  I want to establish network connectivity between my host OS (XPsp3) and my guests (CentOS5.5 and Windows 7).

  So far, I can ping between guests, but not between host and guest, or comments to the host.  When I try, I get a message "destination host unreachable".

  When I configured my virtual machines in a first time, I put them to 'Host-Only' and I need to keep it like that for the purpose of what I do with them - which is the problem?

  Ipconfig and ifconfig outs of machines attached.

  Bests

  Adam

  ... If you use VMware Workstation, you could also reconfigure VMnet1 in the 192.168. 8.x subnet using the "Virtual Network Editor"

  André

• unique IP address does not work properly. with win7 host and guest.

  Hello

  I can use internet equally as good on my host and guest WIN7 using a bridge connection.

  I use a bridge connection.

  My main goal with win7 as a virtual machine is to use the same application online with a different IP address... This is where it falls apart. When I do 'whatsmyip"on the virtual machine and the host. It appears to be the same.

  ipconfig in CMD shows 192.168.1.x1 on the host and 192.168.1.x2 on the comments. but make an ip check online shows that

  96.365.1xx.x on two of them.

  I only got an E-card... but maybe there's a way to fool the router by giving me two single dynamic IP address...

  Thank you for your time!

  Attached is a mental map of the way I'd like it works. (The two runnig Windows 7)

  On the IP addresses should not be the same as those listed below

  

  The problem here is not in VMware Workstation or your host, its your NAT:ed internet connection.

  Your internet provider very probably only you give an IP to get out, if you want more you have to communicate with them.

  Linjo

• How to apply a master page to several documents at the same time?

  How to apply a master page to several documents at the same time?

  > The format of the page master is get imported, but the first page of all documents still remain with the format of page master default 'right '.

  AMP?

  Some content is unique to the first page mapped on master page first in the table to:
  View > reference Pages... MasterPageMaps

  That page and table do not exist by default, incidentally.

  and you make a:

  Format > Page layout > apply Master Pages

  After doing the import?

• Cannot ping host or guest using VM Workstation 5.5

  Local host Machine Windows XP

  VMWare Network Adpater VMNet1 (host)

  IP 192.168.189.1

  Adpater Ethernet Local machine

  Suffix connection specific DNS: ISP

  IP address: 192.168.1.101

  VM guest computer

  Ethernet adapter PB PVT:

  Suffix connection specific DNS: white

  IP address: 161.228.210.176

  The network of the virtual computer is configured to use "Home" only

  When I ping the host computer I get "Request timed out".

  When I ping the Guest Machine (VM) I get "Request timed out".

  Logon at the prompt, right click on 'My network places', choose 'Properties', right click on the connection to the local network and choose "Properties". Open the properties of "Internet (TCP/IP) Protocol". Select "Obtain an IP address automatically" and "Obtain DNS server address automatically". Let him.

  If this does not work, provide "ipconfig/all" host AND guest, but also some screenshots of the tabs in the VMware virtual network Editor!

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP / vEXPERT 2009

• Host and guest of the machines on different physical networks

  Hello everyone.  I would wise advice from the forum, about a particular environment, I am trying to set up.

  I have VMware Server 2 installed on my XP laptop, which is connected to a DSL modem via a NIC edge portable said has also a PCMCIA NETWORK card installed in it.

  I would like to take a virtual XP workstation and connect to a modem cable via the PCMCIA NIC for test connection hosts and guests safe through the public internet.  For this exercise, I need two machines to be completely separate and therefore have no way to reach or in interaction with each other anyway, except through the extended link.

  What follows is a list of what I've done so far.  I would like to know if there is anything I missed.  Perhaps more measures must be taken that I'm not aware of.

  Thanks in advance for your collective time.

  (1) disabled all services associated with the PCMCIA NIC on the host computer, including TCP/IP, except the VMware Bridge Protocol.

  2) welded by the mentioned back PCMCIA NIC to VMnet2 via VMware Virtual Network Editor.

  (3) excluded the NETWORK PCMCIA card automatic connection via the virtual network Editor.

  (4) set up the virtual ethernet device of the instance XP comments use the custom VMnet2 network.

  (5) set the property 'NetworkAddress' of the network connection in the case of XP from comments to the MAC address of the PCMCIA NIC by step seven of the next mission - http://communities.vmware.com/message/378576;jsessionid=034FC6E865C0DB28AD269D7445F2AD0D

  PS - How could these measures differ for a guest computer to Linux (openSUSE 11), especially step 5 in my list above?

  Welcome to the forums!

  IMHO, I think you have done all that was required. I don't know why your step 5 is necessary or if it will be same cause problem. "Bridged" means that the customer acts as its own instance on the network, which includes a discreet addresses MAC and IP, from my point of view. Affecting the MAC guest host MAC is not necessary for the connection of standard bridge, so why if it is necessary here? In addition, you can set any MAC address that you like for a VMware guest. There are restrictions, once again setting the host MAC address in the guest can cause problems.

  You can find the VMware documentation on how to do it here: Page 240, http://www.vmware.com/pdf/vmserver2.pdf

  There is also something on definition of MAC addresses: Page 234

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP/vExpert 2009

  Published by AWo

• How to disable the sharing of files between the host and guest XP PRO?

  Hello my setup is:

  Host of XP PRO and XP PRO comments using NAT.

  How to disable file sharing between the host and guest (do not want to view or access the file share on host comments)?

  In the comments

  I tried to disable simple file sharing in folder options and uninstall

  File sharing and printing of LAN properties but can always see and have access to the

  Organizing actions of folder...

  Help please!

  Then you will need to disable "Microsoft File and Printer sharing" or you need to set restrictions with the GPO. As long as the systems have their default values the value of a Microsoft network allows to use actions.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

• How to stop the bridge to automatically apply the profile to images?

  Adobe Bridge (CS6) seems always automatically apply the profiles of lenses (vignetting correction) my photos. I don't want to do that, I want the images have no correction applied by default. How can I do this?

  Thank you

  Dave

  Assume that you are talking about Camera Raw.  Depends on what you have set to the defaults in ACR.  You can set your own preferences and make sure the default value.

  There is also an Ant raw camera at http://forums.adobe.com/community/cameraraw if you have more in-depth questions.