Apply the template to a page already created

Similar Questions

• After applying a template to a page, the design mode is empty - I can change only in code view.

  When I apply a template to a page, it's fine. I can see the elements of the page in design view and code view. I can edit the page and upload it and everything is fine. However, when I save the page under a new name or close the page and then reopen the design mode is empty, the code mode is normal. I would like to be able to see the page in design view and cannot. I don't know what to do. I hope someone has an idea for me. Thank you.

  I use PS CS5 and pages are ASP.

  I was opening a page, then application of a model (dwt) him - then ' record as. I now create a page that you mentioned, and that's fine. I saved and closed and then reopened and things are visible in Design view. It will take a while to redo this page and others - but it seems that it will work. I had hoped to just apply the template (I thought that I had done it a while ago), but perhaps it does not work. ?

  Once again thank you.

• Can I apply 2 templates on 1 page?

  Hi, I create a multilingual site, so I have Master Pages with all non-verbal content, then I apply to each page, the text in the correct language.

  So it is horizontally organized by subject of the page (with the Pages of their masters), and each language is on a different line.

  But now I need to create a Menu that will work at right angles to the Master pages and in parallel with the languages.

  For the moment, I copy paste 3 menus together 1 in each line.

  But if I want to make a change I do around 30 times.

  So if it was possible to apply 2 templates for each page, it works perfectly.

  Is this possible?

  Thank you very much.

  You cannot apply two masters to a Page, however you can do is to create a Master with your page layout and graphics as you said. Then create three more master pages for your language based offshore the first master.

  In this way all changes the chart Master apply to three other schools but you maintain the ability to use mastery of three languages for these pages.

• How to apply the model to multiple pages at once?

  My site has about 4000 pages, I want to apply the template to all existing pages at once. Is there a procedure of application of the model to multiple pages.

  Please suggest me.

  I had the same problem and although it is a very old thread, I would like to share my solution with those who find this via google, too (like me):

  Follow these steps:

  1. Open the files in a text like Sublime edtor (impossible in Dreamweaver when the model area is locked).
  2. Use the "Find and replace" to replace each text with the name of the new-model .dwt .dwt in open files.
  3. Save files.
  4. Inside Dreamweaver go to 'Edit' > 'Models' > 'update Pages. In the dialog box, select "Find in files" and choose the name of the former model and click on 'start '.
     If there are areas of the unequal model, there will be one or more dialog boxes where you can select how DW must correspond to these regions (for all files).

  Source: WikiHow > How to apply a template Dreamweaver to several files

• Apply the model to multiple pages

  I change the navigation bar on the Web site of the company of some of the static links to a drop down menu DHTML (link to the external JS file in the HEAD, a href in the BODY section). Apart from the menu and some content in the header/footer, nothing else in the pages change. I am aware of how to apply a template to one page, but searching the Internet didn't have a way to automate the process of task or batch, if you want to apply to all pages in a site. There are more than 1800 pages, therefore apply to all pages manually would be extremely tedious...
  
  Is there a way to batch?
  
  Thank you.

  You use templates on a site that big?

  There is no batch processing method to apply a template to a page group. He
  couldn't be, since you need to specify what content goes in which
  editable area.

  I usually recommend no more than 100 pages for models. Anyway, you
  should be use server-side features of this navigation feature...

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "KamalSingh" wrote in message
  News:ebdfgl$BB9$1@forums. Macromedia.com...
  > I change the navigation bar on the site of the company since static links to a
  > (Link to the external JS file in the HEAD section, a href in DHTML drop-down list
  > the
  (> BODY). Apart from the menu and some content in the header/footer, nothing
  > other
  > in the pages will change. I am aware of how to apply a template to one
  > unique
  > page, but searching the Internet didn't have a way to automate the task
  > or
  > macro process if you want to apply to all pages in a site. There are
  > on
  > 1800 pages, therefore apply to all pages manually would be extremely
  > tedious...
  >
  > Is there a way to batch?
  >
  > Thank you.
  >

• Applying the template customized by using Extendscript

  Is it still possible?

  The closest I got it about 2 not shy to actually apply the custom masterpage.

  FCodes ([app. GetNamedCommand ("MasterPageUsage"). FCode])

  This example gets the dialog box open, but how to choose the template customized by name and apply it without having to open a dialog box?

  And on the flip side, if a custom stencil is already defined, how can we change it by default, 'right? "

  See you soon

  To my knowledge, the Fcodes command is a way to simulate the input user, so you get the dialog box.

  You can set the master page using this code:

  // Optional: Get the current page of the active document
  var doc, page;
  doc = app.ActiveDoc;
  page = doc.CurrentPage;
  
  // Apply a master page called "Separator"
  page.PageBackground = Constants.FV_BGD_OTHER;
  page.MasterPage = "Separator";
  

  To return to the default master page, use

  page.PageBackground = Constants.FV_BGD_DEFAULT;
  

• How to apply a template to a page downloaded using sftp?

  I would like to download the document .html with the appropriate model using sftp instead of apply the model using backend in British Colombia.

  Hello

  You cannot apply/assign a template to a page via sftp.  You need to action via the back-end or using DW.  Since you do not prefer this in an extension of dorsal DW would be the alternative.

  - lyst-and-dreamweaver-cs6-creating-and-publishing-sites/ http://tv.adobe.com/watch/introducing-business-catalyst/getting-started-with-business-cata

  Kind regards

  -Sidney

• How to apply the mass PhysX to a w3d created with max

  Hell,

  I need to figure out how I can do to apply e.g. "mass" or "restitution" to some body created with 3d max and imported in Director w3d format.

  I know how to apply 'transform.position', 'transform.rotation' to a w3d created with max.
  and how to apply the mass and the return of an object that is created with lingo, but I do not know how to do mass a w3d created with max.
  Who is the syntax?

  Can you give me a hint?
  Thank you.

  It works for me :-)

  I sent you a private message.

• Loss CSS & behaviors when you apply the template

  I created my site and then realized that I could use a model for big changes. Then, I saved an and start copying on my content files. Everything was going well until I came to be copied into a page with a form validator. I can't get the upcoming help text and I also can't conduct must trigger on the Send button.

  TThis is the link to the page that has a form of work and is NOT based on a model

  
  

  This is the link to the page that had the model applied and no longer works

  Thanks for any advice I can get on it.

  Samantha

  Samantha,

  Look towards the bottom of the page that works for one

• How can I increase the size of the virtual disk after vm already created

  Hi all

  I seem to have underestimated the amount of disk space that I would need for my virtual machine. I'm running out of space on my c: partition and would like to extend a 50 GB additinoal.

  I figured it would be pretty simple, so I turned off the VM and entered the settins of the virtual machine > and click on disc 1, but everything is gray out. I would like to take this space to the

  physical disk rather that reduce my e: partition and then increase the c:

  I know there is an option to create a floppy disk to addtinal but I don't think that will help me expand the C: partition.

  Any advice would be greatly appreciated

  Thank you

  Phil

  

  Yes, you will need to remove the snapshot. Note that 'Delete' merges actually all deltas in the base disk, i.e. you will not lose any data.

  André

• CSS styles disappear when the template is applied to a new page in dreamweaver cs5

  Mac OS 10.6.8

  Dreamweaver CS5

  Please bear with me as I'm not familiar with coding and usually work in design mode.

  I was faced with the menu bar drop-down menu with Spry horizontal and finally managed to do look like I want it to look. I have inserted in my template page. When I saw in the browser, it seems to work correctly. So far so good.

  When I apply the template to a page, all the CSS style disappeared (without defined styles or applied properties)

  in Design view. In Live View mode, it seems OK. Unfortunately, I've updated several pages, and all have the same problem.

  Can someone please? I'm at my wits end!

  Thank you very much.

  Kathleen

  Thank you very much, Nancy.

  Previously, I always applied a model to a page by clicking Edit/models/apply a page template. He has always worked in the past before you insert a menu bar horizontal Spry. That seems to have created the problem.

  Your suggestion was very helpful. Now, I can at least see the styling (although not the Spry bar menu style). I'll have to re-do about 8 pages, but it's a much smaller mountain to climb now.

  Thanks a lot for your help.

• can I change the indents on Master Page without changing the text on the pages already finished?

  Hello

  With the help of experts on this forum, I corrected some problems of dash/tab on my two Master Pages.

  Here's the thing, though - it screwed up the four pages that I already created (and then manually set): the text in the placeholder on the top right text that I had already added to these pages and did other things also.

  I need to create Master Pages to use for all new pages I create in the future?  Or is it possible to set a Master Page and then tell InDesign to apply these changes to the new page I create, but to leave alone the pages already created?

  Thank you, Malcolm

  If the pages need to be different, you can create a new master page for each of these appearances. Conversely, if it's just a one-time deviation from the master, you could click the document page and choose replace all elements of Master Page in the Pages panel menu. The duplicate text boxes that you see is because you have redone the master to the pages of the document. This could be avoided by setting the text frame on the Master Page as a main text block. Who help me?

• How to put all the pages using the template has to use the template B?

  I use Dreamweaver CS4 Web.

  I inherited a website which uses Dreamweaver templates.  In the site, the previous site administrator used several different models for different sections of the site.

  I am trying to redesign the site to use PHP include to reduce the bloating of the site.  Therefore, I am trying to edit the template for all pages of the site to the new one that I designed.  I have not found a way to do this.  I can select the pages individually and change their models, but I have not found a way to make an update of the model of batch processing.  Is there a way to do this?  If this is not the case, can anyone think of a better way to standardize the site rather than update individual templates?

  You would certainly add the editable area of the title.  Each page should have a specific page for optimal exposure title SE.  Without this editable region, you wouldn't be able to create specific page titles.

  -Add the editable area of the title.  Now your two models have the same number of editable regions, each with the same name.

  Then all you have to do is to close * all * files DW.  Then do a search and replace-

  FIND-

  /Templates/template_A.dwt

  REPLACE-

  /Templates/template_B.dwt

  First, make a backup of the entire site.

  Finally, open template_B, make a negligible change and reverse the trend.  Save template_B and update the entire site.  That should do the trick.

• How can I download a template of a page in the current site, what I'm getting?

  How can I download a template of a page in the current site, what I'm getting?

  Yes, that's correct. I was talking to copy the content of the template to another page, as a workaround, you can check the links I've included in my previous answer.

  Thank you

  Sanjit

• Manually re-create the problem connecting mobile page

  Hello!
  
  I made an app with both Desktop and Mobile interfaces. After that, I have created many pages in Desktop and Mobile part.
  
  By mistake I deleted the mobile login page and now I have a problem to recreate.
  
  (1) when I try to recreate the page of connection to a standard way-all her time alone for the desktop interface is created (no option to say I want to mobile interface).
  (2) if I had a mobile interface as a default and then create a new login-result is that the same desktop version made, without worrying.
  
  So I come to the idea to remove the mobile interface and recreate. In this process, I know that the homepage and login pages are created automatically. But Apex does not allow me to remove the interface when there are pages that depend on this interface. And to remove all mobile pages only to create a page look stupid for me.
  
  So is there any help for this purpose?
  
  RG,
  Damir Vadas
  http://Damir-vadas.blogspot.com

  They appear no different as you suggest the issues are related, and 2 of them speak alias login page.
  Maybe:
  This thread = create login page creates "dynamic form.
  'security weired' = alias issues
  Threat of closure = gas - caused by the 'dynamic form' not being page does not "login".

  Suggestion of Denis is Ok and it works, that's for sure.

  I don't understand this. Do you mean the copy in another application is a suitable workaround?

  The step of the wizard page you tie - back to selection of the page. Page types is primarily a group option in the User Interface.

  Do not need to import/export page - copy in another application?