How to put all the pages using the template has to use the template B?
I use Dreamweaver CS4 Web.
I inherited a website which uses Dreamweaver templates. In the site, the previous site administrator used several different models for different sections of the site.
I am trying to redesign the site to use PHP include to reduce the bloating of the site. Therefore, I am trying to edit the template for all pages of the site to the new one that I designed. I have not found a way to do this. I can select the pages individually and change their models, but I have not found a way to make an update of the model of batch processing. Is there a way to do this? If this is not the case, can anyone think of a better way to standardize the site rather than update individual templates?
You would certainly add the editable area of the title. Each page should have a specific page for optimal exposure title SE. Without this editable region, you wouldn't be able to create specific page titles.
-Add the editable area of the title. Now your two models have the same number of editable regions, each with the same name.
Then all you have to do is to close * all * files DW. Then do a search and replace-
FIND-
/Templates/template_A.dwt
REPLACE-
/Templates/template_B.dwt
First, make a backup of the entire site.
Finally, open template_B, make a negligible change and reverse the trend. Save template_B and update the entire site. That should do the trick.
Tags: Dreamweaver
Similar Questions
-
Outlook express 6 - How to put all the unread messages in "BOLD"?
How to put all the unread messages in "BOLD" with outlook express 6?
Are you referring to messages unread, displayed in the preview pane?
If a message is unread, it should be in bold by default.
========================================
* Moved to appropriate forum. *
-
How to put all the data into one phone to another?
Okay, so I have an iphone 5 c and I want to spend it with old iphone my mother 5 s. I want to move all the data from the 5 c to 5 s. but I don't know how to do it? I'm sure that you connect the 5 c with itunes on a computer to do. Help?
You can do it. First of all, make sure that the 5s are deleted properly: what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support
Then you can transfer the contents of the 5 c to 5 s: transfer content from your old iOS device to your new iPhone, iPad, or iPod touch - Apple Support
-
C7280 puts all the tasks in the queue, how to re - set resume printing
C7280 has good USB connection, will print diagnostic pages, takes orders from scan, but puts all the print requests in the queue. How to ' choose the appropriate setting to resume printing.
What operating system?
Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.
-
Model DW: Put all the pages for the server AFTER a model has been modified?
I am probably wishful thinking, but I'd love to see an extension that would put all THE pages updated by a model on the server with a click of a button. If you have a web site with 50 pages that are based on a model, sometimes you have to manually choose the files to put on the server. I think it must be something built into dreamweaver. Anyone know anything like what I describe here?
the answer is the cute little circular button at the top of the files. Check the live doc on this subject:
-
How can I put all the mail to a folder in a text file?
I want to put all the lines of the object to a file (any file) in a text file for analysis of traffic.
Right-click on a folder, ImportExportTools/export all messages in the folder/just index (CSV or HTML).
-
4655 HP Office Jet: How can I fax multiple pages using the hp officejet 4500 desktop computer
How can I fax multiple pages using the hp officejet 4500 desktop that you just bought
can you please email me at [removed personal information]
-
How to add all the tabs open as I used to?
How to add all the tabs open as I used to?
You can go to bookmark all tabs by right-clicking a tab, or use the hotkey Ctrl + Shift + D
-
How to put all through traffic the easy vpn client VPN server
Hi people
I want to ask you, how to put all of the server the easy vpn client VPN traffic through.
I mean, I have a server vpn at home, and if I connect to the vpn from outside server, to be with an IP address of my home.
There is the configuration up to now. Where is the problem?
ROUTER1 #sh running-config
Building configuration...
Current configuration: 5744 bytes
!
! Last configuration change at 19:51:18 UTC Wed Sep 4 2013 by cska
!
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
ROUTER1 hostname
!
boot-start-marker
usbflash0:CVO boot-BOOT Setup. CFG
boot-end-marker
!
!
!
AAA new-model
!
!
AAA authentication login ciscocp_vpn_xauth_ml_1 local
AAA authorization ciscocp_vpn_group_ml_1 LAN
!
!
!
!
!
AAA - the id of the joint session
!
Service-module wlan-ap 0 autonomous bootimage
Crypto pki token removal timeout default 0
!
Crypto pki trustpoint TP-self-signed-1604488384
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1604488384
revocation checking no
!
!
TP-self-signed-1604488384 crypto pki certificate chain
certificate self-signed 01
3082022B 30820194 02020101 300 D 0609 2A 864886 F70D0101 04050030 A0030201
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 31363034 34383833 6174652D 3834301E 170 3133 30383239 31313539
32395A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 36303434 65642D
38383338 3430819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100CD 57 F1436ED2 8D9E8B99 B6A76D45 FE56716D D99765A9 1722937C F5603F9F
528E27AF 87A24C3D 276FBA1C A5E7C580 CE99748E 39458C 74 862C 2870 16E29F75
7A7930E1 15FA5644 D7ECF257 BF46C470 A3A17AEB 7AB56194 68BFB803 144B7B10
D3722BDD D1FD5E99 8068B77D A1703059 9F0578C7 F7473811 0421490D 627F25C5
4 HAS 250203 010001A 3 53305130 1 130101 FF040530 030101FF 301F0603 0F060355
551 2304 18301680 141B 1326 C111DF7F 9F4ED888 EFE2999A 4C50CDD8 06 12301
03551D0E 04160414 1B1326C1 11DF7F9F 4ED888EF E2999A4C 50CDD812 300 D 0609
2A 864886 04050003 81810096 BD0C2B16 799DB6EE E2C9B7C4 72FEAAAE F70D0101
FF87465C FB7C5248 CFA08E68 522EA08A 4B18BF15 488D D53D9A43 CB400B54 8006
CB21BDFB AA27DA9C C79310B6 BC594A7E D6EDF81D 0DB7D2C1 9EF7251B 19A 75403
211B1E6B 840FE226 48656E9F 67DB4A93 CE75045B A986F0AD 691EE188 7FB86D3F
E43934FA 3D62EC90 8F37590B 618B0C
quit smoking
IP source-route
!
!
!
!
CISCO dhcp IP pool
import all
network 192.168.1.0 255.255.255.0
DNS-server 195.34.133.21 212.186.211.21
default router 192.168.1.1
!
!
IP cef
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
license udi pid CISCO892W-AGN-E-K9 sn FCZ1530C209
!
!
username privilege 15 secret 5 cska $1$ $8j6G 2sMHqIxJX8MQU6vpr75gp1
!
!
!
!
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
Configuration group customer isakmp crypto VPNGR
vpngroup key
DNS 212.186.211.21 195.34.133.21
WINS 8.8.8.8
domain chello.at
pool SDM_POOL_1
ACL 120
netmask 255.255.255.0
ISAKMP crypto ciscocp-ike-profile-1 profile
match of group identity VPNGR
client authentication list ciscocp_vpn_xauth_ml_1
ISAKMP authorization list ciscocp_vpn_group_ml_1
client configuration address respond
virtual-model 1
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
Profile of crypto ipsec CiscoCP_Profile1
security association idle time 86400 value
game of transformation-ESP-3DES-SHA
set of isakmp - profile ciscocp-ike-profile-1
!
!
Bridge IRB
!
!
!
!
interface Loopback0
192.168.4.1 IP address 255.255.255.0
IP nat inside
IP virtual-reassembly in
!
interface BRI0
no ip address
encapsulation hdlc
Shutdown
Multidrop ISDN endpoint
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
!
interface FastEthernet5
!
FastEthernet6 interface
!
interface FastEthernet7
!
interface FastEthernet8
no ip address
Shutdown
automatic duplex
automatic speed
!
type of interface virtual-Template1 tunnel
IP unnumbered Loopback0
ipv4 ipsec tunnel mode
Tunnel CiscoCP_Profile1 ipsec protection profile
!
interface GigabitEthernet0
Description Internet
0023.5a03.b6a5 Mac address
customer_id GigabitEthernet0 dhcp IP address
NAT outside IP
IP virtual-reassembly in
automatic duplex
automatic speed
!
wlan-ap0 interface
description of the Service interface module to manage the embedded AP
192.168.9.2 IP address 255.255.255.0
ARP timeout 0
!
interface GigabitEthernet0 Wlan
Description interface connecting to the AP the switch embedded internal
!
interface Vlan1
no ip address
Bridge-Group 1
Bridge-Group 1 covering-disabled people
!
interface BVI1
IP 192.168.1.1 255.255.255.0
IP nat inside
IP virtual-reassembly in
!
local IP SDM_POOL_1 192.168.4.3 pool 192.168.4.245
IP forward-Protocol ND
!
!
IP http server
local IP http authentication
IP http secure server
overload of IP nat inside source list 110 interface GigabitEthernet0
IP nat inside source static tcp 192.168.1.5 3389 interface GigabitEthernet0 3389
IP nat inside source static udp 192.168.1.5 3389 interface GigabitEthernet0 3389
IP nat inside source static tcp 192.168.1.5 21 interface GigabitEthernet0 21
IP nat inside source static udp 192.168.1.5 21 interface GigabitEthernet0 21
IP nat inside source static tcp 192.168.1.4 3389 interface GigabitEthernet0 3390
IP nat inside source static udp 192.168.1.4 3389 interface GigabitEthernet0 3390
overload of IP nat inside source list 120 interface GigabitEthernet0
IP route 0.0.0.0 0.0.0.0 dhcp
!
exploitation forest esm config
access list 101 ip allow a whole
access-list 110 permit ip 192.168.1.0 0.0.0.255 any
access list 111 permit tcp any any eq 3389
access-list 120 allow ip 192.168.4.0 0.0.0.255 any
!
!
!
!
!
!
!
control plan
!
Bridge Protocol ieee 1
1 channel ip bridge
!
Line con 0
line 2
no activation-character
No exec
preferred no transport
transport of entry all
transport output pad rlogin udptn ssh telnet
line to 0
line vty 0 4
privilege level 15
preferred transport ssh
entry ssh transport
transportation out all
!
Thanks in advance
To do this you must make the following changes:
(1) disable split Tunneling by deleting the ACL of your configuration of the client group.
(2) enable NAT for VPN traffic by adding 'ip nat inside' to your virtual model of the client network to the ACL that controls your PAT.Edit: Theses are the changes to your config (also with a little cleaning):
Configuration group customer isakmp crypto VPNGR
No 120 LCD
!
type of interface virtual-Template1 tunnel
IP nat inside
!
no nat ip inside the source list 120 interface GigabitEthernet0 overload
!
access-list 110 permit ip 192.168.4.0 0.0.0.255 any
no access-list 120 allow ip 192.168.4.0 0.0.0.255 any
Sent by Cisco Support technique iPad App
-
How to make all the fields on one page read only (for the recipient) without having to make each field read-only?
Hello Jmbtexas4,
By default, you will need to individually click on the fields of the form and check the 'read only' and save it. From now on, it is not possible to select all together and make the changes.
-Usman
-
How to add all THE tabs not only the current criteria
Hello
I want to be able to bookmark ALL the sites I've visited. I know CTRL + D and SHIFT + CTRL + D and right mouse clicking on a tab and choose bookmark all tabs. What I'm looking for, it's mark recursively. Here is an explanation:
I start Firefox and load the page from my home.
I'll tell site Google.com.
On the same tab, I leave Google and go to Microsoft.
On the same tab, I leave Microsoft and go to Mozilla.org
On the same tab, I'm leaving, I leave Mozilla and go to CNNSo, if I right-mouse-click the Go Back button, I see all these pages in order of the last went to the first visit.
How to add all these pages of homepage-> Google-> Microsoft->... all the way
I hope this makes sense and that a solution is there.
Waseemn
If you open the page in different tabs, then you use "bookmark all tabs" in the context menu of the tab bar.
You can middle-click on a link to open the link in a new tab or hold down the CTRL key and click to the left.
ALT + Enter opens links through the address bar in a new tab. -
burn mp3 to CD audio files, can not put all the files in the 1 disc,
I am trying to burn mp3 to CD audio, if I choose audio CD, some how when I drag the file in the burn list, it's auto show 1 file in a single disc, how can I put all files on 1 disc? If I choose the data disk, so I put all the files in the 1 disc
In fact, when you copy MP3 files as such, it is written as such, in digital format. In other words, the size of the file is important here. Depending on the size of CD, 650 MB to 800 MB, you can add files only up to the storage capacity of the CD.
In the case of the audio CD, the data is written in analog format (as a cassette tape or gramophone record). In other words, in the present case, the duration of the file audio issues. The capacity varies between approximately 74 minutes to 90 minutes, respectively.Because each file is 50 + minutes, as stated in your post, it is normal to restrict a file per CD, such as the capacity is 74 minutes to 90 minutes. If you use the MP3/WMA format instead, you can put all the files in a single CD.Answer if your problem is not solved. -
How to get all the users of the IOM, whose field Manager is not null or empty
Hello world
How to get all the users of the IOM, whose field Manager is not null or empty (using java code)
Thank you
Published by: user11205212 on January 18, 2010 12:38 AMHey beginner,.
I come to write this line where he can put his sql query... in the next post I provided the example sql also...
Concerning
VMPublished by: user12280771 on January 18, 2010 22:11
-
How to remove all the pictures imported from my I phone 6
How to remove all the pictures imported from my I phone 6
Imported from the place where?
If they were imported from your computer, you remove the same way that you put on there: by syncing with iTunes. to remove them, you need to synchronize an empty folder, or simply turn off the Photo in the form of synchronization option summary pane when the iPhone is connected.
-
How to disable all the selections at once?
How to disable all the selections at once?
If you are referring to the playlist, artist, album & kind selection boxes, then I don't think that there is a way to uncheck those all at once.
If you mean the boxes in the view of songs Ctrl + click and the checkbox to check or uncheck all of the boxes. Note, however, that the use of these boxes is a bad way to manage the synchronization. Uncontrolled songs are ignored in the normal course of track in track or shuffle playback. Better to use one or more playlists to control what is synchronized and have checked most, if not all of your library. Items not controlled in my library are things like interview bonus tracks that had never what to hear accidentally, I keep in my library.
TT2
Maybe you are looking for
-
How can I re - install firefox without losing my data. It is infested bame ad.
Firefox is infested with "ads name. How can I get rid of it or how can IRe-install firefox without losing any data?
-
How to solve the double integrals in first hp?
-
Satellite A200-21dts CD/DVD drive with a Blu - ray drive replacement
Hello I have a laptop Satellite A200-21dts supplied with the mat * a UJ-850 drive. My original disk no longer works...I plan to buy a new one, but I wish that whoever has a buit in the Blu - ray dvd player. I've heard that not all players are working
-
Glimpses of unreadable e-mail in Finder - El Capitan
Finder shows readable previews of PDF files picture and even some (but not all) of MS Office files. But e-mail associated mail Apple (.emlx) own program files show only as small images, unzoomable, unreadable. Overview of the email of Spotlight is
-
missing a vocal track of songs
As indicated in the title, some of my songs are missing all vocal tracks. I have noticed that a song I play very often when out of nowhere the song were completely lacking. First arrived in my car. Each song forehand had all audio and nothing is miss