AppWizard DialogEvent.OK not been fired on finish

Similar Questions

• VirtualISO14443Part4TargetCallback.processCommand () not been fired.

  Hi guys,.

  I followed all the tutorial here which allows me to emulate an NDEF tag. I've converted to emulate a tag A of ISO 14443 type by changing the definition of _tag to "VirtualISO14443Part4TypeATarget".

  I also changed the TagEmulatorCallback class to implement "VirtualISO14443Part4TargetCallback" and added the processCallback() function.

  Also, changed the label entitled to this:

  _tag = new VirtualISO14443Part4TypeATarget(new TagEmulatorCallback(), "1234", null);
  

  My problem is that this function does not seem to be getting fired, at least, I have a problem seeing. I stuck in a call to Dialog.alert () in the function, and it does not appear when the phone is introduced to the NFC reader.

  Any ideas on how to figure this would be greatly appreciated?

  In addition, any ideas on where I can get a datasheet for the type of card that is emulated here?

  Thanks in advance.

  Hi Martin,

  I gave up trying to imitate a target of Type A. I just changed all occurrences of with TypeB TypeA and everything seemed to work.

  I'm always curious as to why TypeA has failed and can send you the code later, but right now I'm tight on time.

  Thanks Martin!

  Conor-

• SoundChannel SOUND_COMPLETE not been fired when it is called SoundChannel.stop ()...

  Hi all...

  I write code that is an audio player. I use streaming (event SAMPLE_DATA) API to push the audio data.

  It works very well, and I get a SOUND_COMPLETE event when there are no more acoustic.

  However, if I run the function SoundChannel.stop () (in response to a 'pause' button on the screen), the sound stops, but no SOUND_COMPLETE event is generated.

  Is this as expected?  It seems strange to me that a SOUND_COMPLETE event would come only when the incoming audio data have been exhausted, but not when the stop() method is called.

  Does anyone have experience with these access points?  I couldn't find a solution anywhere I searched so far...

  -Tim

  in fact, I do see a satisfactory means to do this because the soundchannel class is final and cannot be extended (without hacking the soundchannel class).

  IMO, that followed the obvious way is best.  That is to say, you know what stop() is applied do or call no matter when it happens.

• I need to clean the registry because it has not been done in a long time.

  I need to clean the registry because it has not been done in a long time.  I can't find any software cleaner that cleans all teasers just identify errors and clean up maybe 3 things, but you need to buy to do it all.

  What can I do?

  Do not.  He didn't need it and even if you deleted 1000 things from him (doubtful) it would make little or no impact on performance.

  If you don't understand the registry enough to know what to erase manually or how to add things yourself, etc. - using a tool that almost arbitrarily find the things that are supposed to be orphaned or not necessary and confidence (for some reason any) can lead to a system of death.

  If you just * have to * ("it's a moral imperative") and then use that integrated with CCleaner.  I generally recommend not even consider using its registry "cleaning" component - but in the many times I used to analyze and find things and go through them manually before I remove them (at least - I've seen ~ 250 entries, he suggested to get rid of and even in this case, my manual check led me to delete all and there was no adverse) I didn't it go wrong.  If you * MUST * do it, use it and save your changes, so you might be able to roll back.  Before do you all - make sure your backups are in order.

  Want generally cleaning XP and maybe actually get a performance gain?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do some cleaning and dusting off this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your WIndows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• After scanning essentials security said my computer has not been scanned and it is not protected

  After that says security essentials scan my computer has not been digitized and is not protected. It is on a weekly auto scan and does not work. Why

  Hi Pat,

  Thanks for choosing Windows 8 and welcome to the Community Forums of Microsoft.

  According to the description provided, automatic scanning of Microsoft Security Essentials not happens on your computer.

  1. What is the operating system on your computer?
  2. you use security software?
  3. did you of recent changes to the computer?

  A possible reason for this problem is that you have installed entirely or partially on the PC security software conflict. Remove all other computer security software.

  Method 1:

  
  Uninstall program anti-virus and check if it helps.

  How to uninstall antivirus or antispyware programs?

  http://Windows.Microsoft.com/en-us/Windows/how-do-i-uninstall-antivirus-or-antispyware-programs

  Important: Antivirus software can help protect your computer against viruses and other security threats.

  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  1. to run, the PC must be on and connected to the internet (it cannot be stopped, "standby mode", hybrid sleep or Hibernate mode)
  2. saving settings must be such that the PC not to close or to go asleep during analysis.
  3 analyses do not begin precisely when demand - some may start earlier or later than the officially set time hour (according to Microsoft servers and charges at the time).

  You can also refer to the article mentioned below for more information.

  Microsoft Security Essentials - Installation Checklist and frequently asked Questions

  http://experts.Windows.com/w/experts_wiki/89.aspx

  If Microsoft Security Essentials problem or if you experience problems of Windows in the future, let us know and we would be happy to help you.

• Do I lose all the iMessages that have not been delivered to my iphone if I withdraw (from iMessage) my phone number? My current iphone is broken and I am planing to get a new one, with in a few months.

  Do I lose all the iMessages that have not been delivered to my iphone if I withdraw (from iMessage) my phone number? My current iphone is broken and I am planing to get a new one in a few months.

  You may lose everything.  iMessage, like most e-mail services, don't keep permanently undeliverable messages.  They only keep in the short period send queue (I don't know exactly how much time but some Apple tech sites indicate no more than 10 days to two weeks) until they are purged.  That's pretty standard as otherwise, large volume, messaging services would be sitting on tera-bytes of messages not delivered each month.

  You actually have to change my phone number?  If not, let alone sign and only in iMessage when you have the new phone with this set of numbers upward to the service.

• If you say that you have sent me Email to change the password, they have not been received.

  If you say that you have sent me Email to change the password, they have not been received.

  Several times I used sync for tranzfer of information to a new computer and or updated computer!
  In the last 24 hours I've sent many requests for 'change password' for those that I tried did not work, so I can connect!

  You say you sent an email over and over again, but no one came to my email which is confirmed you have the right address!

  There is absolutely no evidence that you tried to send an email to me, I checked the spam, I even looked to see if somehow, it went one folder other then my Inbox, nothing has been received on your part!

  Michael Serota

  Removed edit email and public telephone for spammers robots do not find.

  You can enter the wrong email address. I tested 2 fake emails in the password reset page and received the green check mark telling me that the password reset emails have been sent. It is not a real confirmation that your e-mail address is used by Firefox accounts.

  This is done this way so that hackers and spammers can not cheat the system by typing many kinds of emails at random and wait to see if they get a confirmation 'this e-mail address is. So for security reasons, all the entered addresses electronic are treated as real even if there is no account that corresponds to this e-mail.

  Please try some of your other email addresses here and see if you receive a password reset email in these accounts.

• your system has not been modified when installing itunes in my window 10

  your system has not been modified during installation the itunes in my window 10... How to solve

  A step to the solution is to view in iTunes for Windows forum instead of iTunes for Mac.   I would ask that is re - find.

• I followed the instructions for "Go Thunderbird data to a new computer," but the calendar data has not been transferred and the calendar program does not work.

  I manually moved my profile of Thunderbird in Ubuntu 12.04 LTS to 8.1 Windows. I followed the instructions and everything settled as expected except the calendar. Not only the calendar data has not been transferred, the calendar itself does not, for example no dates & everyday of the week, etc., all the menus associated with the calendar are "grey," etc. I'd appreciate any help. TIA KellyJMorris

  Calendar (aka Lightning) contains binary components, which are dependent on OS. Thus, you should not remove the add-on lightning in your add-ons Manager and install the Windows version of lightning.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/lightning/

• Still not get 2016 Outlook and Contacts calendar to synchronize with iCloud. iCloud data file has not been in Outlook but iCloud add-in is enabled.

  I use Windows 10 (v1511), 2016 Outlook Office 365 and iCloud 5.2. Mail is downloaded directly to Google mail Outlook. Calendar and Contacts live in iCloud and work properly in my iPhone, iPad and the app iCloud on the PC. Its just perspective that is not sync with iCloud to get these items.

  In outlook, the Setup program is not set up a data iCloud file ' * APLZOD.pst ' in the account tab data file settings. When you try to install a new data file in Outlook in account settings, the iCloud type available, but when you select what the error message says that this cannot be set in the iCloud Control Panel

  I tried several complete removal and then re - installs to iCloud for windows and have also done with the firewall and antivirus disabled active.

  I also deleted the Outlook data file * *.ost and allowed the installation program rebuild this application fee.

  The iCloud "add to" Outlook "add-ins" is active.

  The calendar, Contacts and tasks of the iCloud Panel section is checked when re-built, but after Outlook is running this section has not been verified and when you try to check it out and apply the change he UN-checks itself.

  Sorry for the long post, but I tried to solve this problem for some time.

  Thank you

  Chris

  The same problem.  I use iCloud for Windows 5.2 and Windows 10, 2016 office.   Everything worked well for several months until a few months ago, when sync calendar has stopped working.   I've updated iCloud of 5.1 to 5.2 but that just killed altogether.  Tried uninstalling icloud and relocation costs.  No luck.  When the iCloud settings appears, I check the box for the calendar and Contacts.  The driver then disappears.   I check again and it sticks.  But no messages on 'configure '.   When I close and reopen, the box is unchecked.   A few days ago I had the same problems the other another thread where he would show "set up" spinning forever (well, 30 minutes before giving up).   Not sure if it's an Apple problem or a problem of office.  But this is of course a problem.

• I'm a developer I forgot my password and password reset e-mail has not been received

  Hello
  We got a plugin developer account
  https://addons.Mozilla.org/en-us/Firefox/users/login?to=/en-us/developers/addons

  Unfortunately we forgot the password and tried to recover it via password reset, but the email to reset the password has not been delivered. Tried several times yesterday and today.
  Our account e-mail address is:
  [email protected]

  Thanks for your help.

  The support forum Addons is separated from the Mozilla product support forum. https://forums.Mozilla.org/addons/

  Try to post in the forum AMO Feedback and Support .

• The requested itinerary has not been mapped in Spark

  If I try to go to some Web sites, for example http://www.rtlnieuws.nl/ I get this message
  The requested itinerary has not been mapped in Spark.
  If I use Chrome I don't have this problem

  I solved the problem by cleaning the mind hidden CC cleaner

• Old photos have not been deleted, even if it's been more than 2 months and keep crashing the photo library in icloud.

  Earlier this year, I used the library to icloud to back up my photos. Everything worked well. After awhile, I deleted the photos and off synchronization from photo library. Today, I decided that I wanted to use again, so I turned it on. It seems to work fine but when I connect to my PC I have the chance to see the old photos have not been removed. They seem to be corrupt (there is an exclamation mark instead of a thumbnail) and I can not open them, instead the library hangs. It has been more than 2 months, I suppose that even if I forgot to delete some photos, they should be gone now. Is there a way to fix this?

  a few things

  1 - iCloud Photo is not a backup - it's a synchronization service - see FAQ-apples iCloud Photo library FAQ - Apple Support

  More precisely

  Do I need a backup?

  ICloud library stores all of your photos and original videos in iCloud, but we still recommend that track you return of copies of your library. You can upload your photos and videos to iCloud on your computer and store them in a separate library, transfer them to another computer with transfer of images or Photosor store them on a separate disk.

  2 - ICPL can be accessed through Safari - connect to iCloud.com can click on the picture and see what's there - look in the recently deleted album and see what's there

  3. we need to know the details - you have other devices using the same iCloud account?

  LN

• Best way to check my Mac has not been hacked?

  Have an end 2012 27 "iMac, OS X 10.9.5, 3.4 GHz Intel Core i7, 16 GB 1600 MHZ DDR3 & have no idea what that means I'm technically disadvantaged. I get e-mails, mainly from some places that I buy, like Sears, Best Buy, etc., that contain strange characters & symbols in the welcome message that I do not open. I talked to the Geek Squad at best buy and was informed that a person may have gotten in my computer. No no proposed solution. Last month, my credit card has been hacked. I'm trying to find out if there is a connection. What should I do to make sure that my computer has not been violated & is always so sure that Apple can do in these difficult times.

  Thank you, Roger

  As usual, the Geek Squad is incorrect. If you get suspicious emails then contact your provider of Internet Service (ISP) and ask for help. If you tend to use the same password for many of your accounts, including your email address and it is fairly easy to understand, then consider changing to a password is more enigmatic, something like * $Merp78@#. A good thing to do is to create separate passwords for each account, and then use a tool such as 1Password to manage all your passwords.

  Whatever you do, NEVER install any antivirus, cleaning or any other third party on your Mac maintenance utility. Not only are they 100% worthless they can create havoc for OS X users. If you currently have one of these types of utilities installed please uninstall immediately in accordance with the instructions of developers.

• photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

  photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

  If you want any help here, you'll have to tell us what the error message.

  Which report you errors to?