Missing audio and vibration of VI?
Looking through all the examples in the sound and Vibration Toolkit and go load the .vi SVXMPL_Sound sound level meter (DAQmx) and he told me there are several files that cannot be found. They are:
SoundVib_Octave.lvlib
SoundVib_ABCWeighting.lvlib
SoundVib_SoundLevel.lvlib
Further investigation seems as if they were part of an another Toolbox "Audio"? How is - it is not part of the package of SV?
Hi John,.
You can check if you have Toolkit ("base") or a Suite in the License Manager EITHER. I have attached a screenshot. We have a full, green square next to it is fully active. I hope this helps!
Best,
CARISA
Tags: NI Software
Similar Questions
-
The NI9423 will work with Sound and Vibration VI
Will be that the NI 9423 mounted on a chassis cRIO work with the NO audio and vibration of VI?
I have an optical encoder of 10-30 V 100 pulses/revolution and would like to make angle field order analysis with her.
is the NI9423 a card appropriate for this purpose or is something else better suited, I'm open to change the type of encoder if necessary.
Hi Bodger
How fast do you think the tree to turn to? The speed of switching module is able to pass to the 1uS extremely quickly. This means that you should be fine unless you are turning the tree at a ridiculously fast speed of approximately 600000 RPM.
Regarding the reading of signals with the sound and vibration screw, you should be able to do this using the digital tachometer functions.
Thank you very much
Dan.H
NIUK Applications Engineering
-
How to cancel the keyboard sounds and vibrations on an Acer Iconia A1 - 840 8 inch tablet
Keyboard continues with the audio and vibration all in settings | Sounds | Tactile sound and vibrate on touch are unchecked. It is particularly strong for the Google Chrome browser.
Settings/language & entrance
on the right side of the keyboard that you use, there is an icon that will open some keyboard settings, tap that
Uncheck the box
Vibrate on keypress
Sound on keypress
-
How to remove missing references and audio files or instruments that popup at launch I need is no longer?
For audfio missing files: go to the Project Audio Bin, mouse control select unused , and then press DELETE. And then click Save.
Missing instruments or plugins, go to your mixer and remove/Exchange any plugins that have a '!"in all of their slot. And then click Save.
-
Audio examples and vibration - activate or not?
Hello
I am a student and I use the evaluation version of LV I am playing with audio examples and vibrations, but I don't see the block diagram only the façade. It says to activate LV. Need to activate the OAS tool to see examples block diagram or is there a trial version?
Hey Charlie,
Please see the following knowledge base:
http://digital.NI.com/public.nsf/allkb/862567530005F09C8625675F00711756?OpenDocument
If you are using the evaluation version of LabVIEW, 'you will not have access to diagrams of screw not available in the basic development systΦme."
Your options are:
1. buy the sound and Vibration Toolkit (and LabVIEW so),
2 buy the version of LabVIEW Student install of the Student Edition (only this version includes noise and vibration measurements): http://www.ni.com/labviewse/compare/
You can check with your University/College to see if they bought the box tool.
Hope it will be useful,
Norbert
-
Firefox asks me to install the missing plugin, when I visit this website (http://patanjaliayurved.org/ ). I have the following steps, but still nothing happens:
install the missing plugin > > > > > > apple quicktime > > > > > is not available (manual installation) > > > > > > download > > > install > > > firefox ask again to install the missing plugin
Hi kanavv,
you need to download the latest version of QuickTime Player for Windows from Apple http://www.apple.com/quicktime/download/
If you have problems you can try to remove the existing installation and install again.Detailed instructions can be found here: using the plugin QuickTime to play audio and video
Let us know if this helped!
-
Windows XP Home on the Portégé R700-1F7 - missing Audio on high definition audio bus device
Recently bought this laptop, need to downgrade to windows xp, wiped the drive and installed new copy of win xp sp3 and site form s Toshiba drivers installed, however always have reported the driver for Device Manager
Audio device on high definition audio bus is missing
Tried to reinstall the audio drivers and chipset again, tried windows update and driver genius, nothing is solve the driver problem, can someone let me know what is the missing driver and where can I download it?
Thanks in advance
Hello
I n t have this Portege model but here is WXP install the and please install all the stuff after this installation order. Maybe this will help you to operate all hardware and software components preinstalled so you. Please post comments.
Windows XP SP3
Synaptics Touch Pad Driver 15.0.12
PatchFiles USBKB918005.reg
USB3.0 Driver 1.0.20.1
Driver USB-Serial 1,00,000
Sun Java2 Runtime Environment 1.6.0_20
TOSHIBA Assist 1.03.00_I
Skins for Media Player 1.00.1121 TOSHIBA
TOSHIBA Assist 1.2.2 security
Trusted Platform Module 3.60.2071.00
V2.1.1.0 pilot TPM
SW 9.1.1.1024 Chipset installation utility
Intel Management Engine Interface 6.00.40.1215
Intel AMT 6.00.40.1215 software
Driver Intel 6.14.10.5258
Realtek Audio Driver 5.10.0.6083
Intel LAN Driver 14.6 (IN146AAW7C)
Ricoh 2.09.03.01 card reader
Wireless LAN
Module common TOSHIBA V6.07.01
TOSHIBA Web Camera Application V1.1.2.13
Fingerprint AuthenTec Driver 3.0.1.149
PatchFiles2 DisableFingerprintSelectiveSuspend
Finger_print_restart V1
Smooth view TOSHIBA 2.0.0.25
PC Diagnostic TOSHIBA 3.2.15 tool
TOSHIBA v3.37.4310 controls
TouchPad On_Off 2.5.4.0 utility
Battery Bluetooth for Windows by Toshiba v7.10.14_XP_SE (T)
ConfigFree 5.90.18
TOSHIBA Mobile Extension V3.94.00.XP
Utility password TOSHIBA v2.01.10
Utilities TOSHIBA 4.30.29
TOSHIBA HDD Protection 2.3.0.1
TOSHIBA HDD_SSD the attention of 3.1.0.6
TOSHIBA Hotkey Utility for V3.7.0.0 display devices
TOSHIBA display device change V3.4.0.0 utility
REG TPSReg
TOSHIBA Power Saver 7.14.00
Timeout15 D15Sec
Wireless keyboard shortcut 129 3.0.0.9
TOSHIBA PC Health Monitor 1.6.2.0
TOSHIBA Sleep 1.4.1.2 utility
TOSHIBA V2.50.1.07 DVD PLAYER - HAS
TOSHIBA Service Station 2.1.40
PatchFiles3 AHCI-IDEREG - 1.0 - ENG
TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 7
PatchFiles4 PatchFiles_WOL_1.0.0 -
HP Envy: My beats missing Audio Panel Win10
One minute of sound works, according to think that my computer updates windows 10 and rebooted. turns without audio ad Np beats Panel. I got the audio drivers for the work but not yet control panel. I have havnt been able to find an answer that will work for my configuration. Someone has an answer that they tell me so well? I miss my beats Control Panel lol.
Uninstall the driver audio Realtek or IDT programs and features. TURN IT BACK ON.
Wait 30 minutes for 10 windows to download and install your driver audio beats. Windows Update should do (I did for me every time even though I didn't).
TURN IT BACK ON.
If you still have no audio and then right click on the audio icon and select the audio problems.
If you still haven't beat Panel then check if you have a device realtek audio, if yes, then go to the realtek site, download driver high definition audio and install. RESET.
-
How can I integrate IPS into the Sound and Vibration Assistant 6.0?
I found out how integrate time domain signals to m/s in S & V 6.0 Wizard, but not IPS. I could scale the signal, but the axis labels will be wrong. How can I integrate directly to the IPS of the entrance of G? Also, is there a way to do the same thing for the analysis of frequency domain?
In the audio wizard and vibration - step vibration level, use
on the integration tab - select double integration and click export integrated signal
Now you have a shift of signals in the right units. Make a spectrum on that and you get a spectrum of integrated signal.
-
Construction of the installer wants to sound and Vibration Distribution but my vi do not need
My vi contains some common entries and a regular to read some 4-20mA, see attached data acquisition.
So I save a new project and build an exe with the vi, no problem, see project files attached.
Then I start building the Setup program by clicking below to install the libraries. I think that I click on the right side of the law library?
But lo! OR say I need sound and Vibration Distribution, now, where does? My vi has no sound and vibration functions...
I click on no, the installer don't build Labview.
I click Yes, Labview kept asking me where is the audio library and vibration.
I bought a NI Developer suite, expensive things like costs about US$ 4000 +. My software vendor told me that I don't have the license for the sound and Vibration Distribution.
So, what should I do? Clicked on some bad settings during the generation of the installer? Is there a way around this problem? Thanks in advance!Hey,.
Try to repair or uninstall/reinstall your DAQmx driver as described in the following KB: http://digital.ni.com/public.nsf/allkb/8C37AB992EB29EA7862571680056E78A?OpenDocument
Christian
-
I had to install a new hard drive because of a bad virus. I reinstalled windows xp service pack 3 but now seem to be missing audio drivers. I can't play any cd or dvd or any video of music stored on my pc etc. DELL INSPIRON 9400.
Help any one please, I'm not a magician to pc.
If you have reinstalled, you may have a few other drivers too (such as video).
In Dell's Support page, you can drill down, you're article Inspiron 4000 and find the drivers here:
http://support.Dell.com/support/downloads/DriversList.aspx?c=us&CS=19&l=en&s=DHS&ServiceTag=&SystemID=INS_PNT_CEL_4000&OS=WW1&OSL=en&CATID=&impid=I'm not sure which one you need for your system, so if you still cannot understand this, do this and maybe we can see what kind of audio device your system has:
Click Start, run and enter in the box:
Msinfo32
Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.
For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.
For information about the audio drivers, expand components, click Sound Device, click on edit, select all, copy and then paste the information here.
There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.
-
Problem of sound and vibration
Hi all:
I met a problem when using audio Toolbox and vibrations, when I select a sub vi of this Panel of the Toolbox, for example the 'filter '.
VI, I see very little setting in the ICO (SpxImage1.jpg), but when a double click and enter in the Properties dialog box, I see more options (SpxImage2.jpg).
what I want to know is, is it possible to set up the details in the parent vi vi sub? because these parameters are variables to my program
Thank you
Hi adobefree...
Right-click on the express vi and select "Open the front panel", you can now see the express vi blockdiagram. You can store as a new vi and work with it. With the new vi, you have all the controls in the dialog box.
Mike
-
How can I me audio and video synchronized?
I use first 13 with Windows 8.1 items to change the old VCR tapes that I transferred to my computer with WinTV. Everything seemed to work - until the middle of the edition of the band, the audio is 8 seconds behind the video. I checked the original in my computer that I added to first Elements and audio and video are synchronized, but in the middle of editing, they are out of sync. There is no way to cut off the part of the video without also carve out part of the audio now synchronized. No way have to slide forward only audio. I tried to delete the new part of the original in Premiere Elements and then adding back all original and cutting of part I had already edited but audio-video synchronization is still off. Any ideas?
Pulfnick
First 13 items on Windows 8.1 (supposed 64bits).
If you have not already the case, update 13-13.1, using Help Menu/implementation of an open project.
First of all ensure that you (manually) or project (automatically) set preset to match the properties of your
source file. See Edit Project Menu/Settings/general and the readings for the Mode of time base edition, image size and Pixel Aspect
Ratio (even if the fields search grayed). If your source is VCR tapes, I am projecting that you deal with Standard 4:3 which would point
to make the project preset according to your predefined project DV Standard NTSC or PAL DV Standard configuration.
Reading the script contained in the monitor of the editing area, you should look at and listen to the content timeline made (i.e. no color
line on content or a green line). Is this the case?
A manoeuvre to deal with this kind of situation (if alternatives are missing).
a. unlink video and audio.
(b) you hold ALT on the main keyboard to the computer, press the arrow key left or right. A single tap = 1 help from frame. Or, as
you hold it the main computer keyboard Shift + Alt keys, press the left or right arrow key. A single tap is 5 frames progressive jackpot.
Please read and review, and so let me know if I have targeted your question. If not or need clarification, please do not
not hesitate to tell me.
Thank you.
RTA
-
Problem PDF interactive, audio and standard poster disappear once uploaded to the server
Experts,
I'm working my way through learning to interactive PDF files and CC iD curve. I created a simple to test, PDF file on which I placed a media file (audio) and assigned the standard poster. I export to interactive PDF format. The document opens on the outcome. Locally, I see my audio shows, click on it, and everything works perfectly. I then download the PDF and the audio (MP3; that is in the same folder) on my server. I then open the PDF file in a browser [any]. It opens correctly, except my icon audio poster is gone and no audio, course. My player is a Acrobat Reader X (10.1.13).
I also added an interactive PDF sample that I downloaded from tutorials Adobe Creative Cloud. Again, works locally, not online.
I also tried to play the audio on the open page. Works locally, not online.
Once more, note that I don't have real MP3 download in the same folder as the PDF file.
I am clearly missing a step or do not understand the whole process. Seems there must be a way to make this work. Otherwise, what would be the point of having the features of media in inDesign, if only visible on the computer of the local developer?
You can view my document here. http://www.examplebox.com/customer/benefits/eicn_benefits_epub.PDF
Any help much appreciated.
FXL EPUB from InDesign CC2014.1 is certainly a factor.
I wrote this a few weeks ago: http://boblevine.us/why-im-finally-excited-about-epub/
-
Files using 24-bit audio and exporting to H.264 Blu - ray
Hi all
I use a track 24-bit audio and I mixed with the video but when I try to export the movie using H.264 Blu - ray, the only option I see in Audio > sample size is 16 bits 48 kHz.
Cannot encode LPCM 24 bit audio first, or did I miss something?
If I check the properties of the WAV audio file, even from within the first, it's certainly 24-bit integer (little endian), stereo, 96,000 kHz.
Any ideas? Am I missing something?
Thank you
Tom
I guess the problem is Little Endian PCM. Linear PCM is a Blu Ray specification, SD is much more efficient and allows for 16 or 24 bits LPCM 48 or 96 KHz. L (as linear) with 24-bit 96 KHz PCM is not supported by still/PR/AME.
Maybe you are looking for
-
Password Toshiba - "incorrect password" message is displayed
I'm pretty sure I remember well my password, but every time I get it, it says "incorrect password". Help, please. I just bought yesterday!
-
Satellite A300 - 1-5 - C:\ does show all files
Hello again, I don't know if I post where I have to but I have a small question. I have a 250 GB HARD drive on my laptop - Toshiba Satellite A300 1 5. When I click on properties on my C partition, I used 16 GB but when I select all the files in the C
-
Tour desk model p-7-123 HP: hp support assistant
I have installed two versions of the hp support assistant. But it does not work. It is not coming or display on my desk. I tried to remove it and reinstall but nothing. I installed it before and it worked fine now nothing. I support Ms 68201 FV 4.0
-
setRowHeight unfortunately slows performance
Hi, I have developed an application that uses a KeywordFilterField. As I could not replace drawListRow in the KeywordFilterField, I created a ListCallback class that implements ListFieldCallback assigned to the KeywordFilterField. Is everything perfe
-
My Windows 7 desktop icons will be a small box around them, the box is white and has perforated lines. Not a big deal, all simply boring. It is usually around the last icon I used. But sometimes randomly will appear around, most frequently the tra