A100 - 158-> SATA drive?

Similar Questions

• Re: Satellite A300D-158 SATA driver

  Hello!
  I need driver SATA for Satellite A300D-158. I don't know name of chipset for this laptop. I need for Windows XP. Where I can find these drivers? Maybe someone knows the name of the chipset in these books?

  Help, please.

  Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=131920

  Maybe it will help you.

• Satellite A100 - compatibility SSD drive and recommendations?

  Hello.
  I want to replace the original HARD drive in my Satellite A100-811 with an SSD.
  What are the parameters for search? I can just about any 2.5 "SATA II SSD on the market?
  Intel X 25 - M Mainstream SATA SSD 160 GB G2 is compatible?
  Are there recommendations for Toshiba?

  Thank you!

  Hello

  A100 controller SATA HDD support.
  Generally, it should be possible to use the laptop as part of a SATA SSD drive.
  But I also read that not all laptops can properly manage the SSD drive.
  In some cases the SSD update the firmware of the player might help.
  So I can't say with certainty that the new SSD will work properly and that the BIOS would properly recognize the SSD.
  I think you'll need to test the SSD drive
  You could order it on Amazon and could test, in the worst case you could send again
  I did it too with some RAM modules that didn t work in my notebook.

  Please post some details if these updates succeeded or not, it would be interesting to know if you can use it in your A100 because I would use a SSD drive too

• Migrating to SATA drive to iMac

  Four days ago my MacPro (2010) died. I have four 3 "SATA drives from 1 to 2 to each of Mac Pro. The computer was for business and personal use. Absolutely everything (including financial information) I have is on these four discs, including redundant copies of some files, but also my Time Machine backup.

  I will have an envelope coming tomorrow which is a RAID box but will be executed in the independent drive with four drives Mode. My 'new' computer is an iMac (2013), that was given to me.  The iMac and the main SATA drive running the same version of the operating system. I need to resolve this issue quickly so I can return to work. In the immediate future, I intend to operate out of the primary SATA drive to catch up, and then transfer when I'll have a good time to transfer.

  My question is the best way to get the entire contents of the primary SATA drive on the iMac's hard drive. I want everything that is on the main SATA drive to put to be on the iMac (including the prefs and hidden folders) of Mac Pro and it would be the same when I booted the Mac Pro.

  Can I use migration utility, clone the drive SATA main to the iMac or even use the Time Machine backup?

  If I clone the drive, I know that I would have to boot from one disk other than the iMac drive to clone to the iMac. When the primary SATA drive is attached, I need to boot from it by holding down the option key at startup key to select the startup disk.

  If I use the Migration utility, it seems I start the iMac, and then run the utility to the iMac of the SATA drive range, which would be connected to the iMac. This would replace all the information on the iMac even though it was the boot drive?

  I printed the information on the Migration of Apple Mac help when transferring to another storage device, but it's not quite clear to me.

  Finished migration

• Satellite Pro P200 - 17 c: Win XP won't load - installation of the SATA driver

  Hello

  I have a satellite pro p200 - 17 c I've had good years, allways worked without any problem.

  Last week when I booted the laptop, windows won't load and I find myself safe mode selection screen. No options whatsoever me to windows loading, I tried F8 and still nothing.

  I tried the restore cd that reimagee the drive but I get the same thing, I tried a new hard drive, once again the same.

  But if I try to load windows from an OEM to install that software does not because it is a sata drive and there is no floppy drive. I have an external floppy drive I use, but it is not known now.

  Any ideas or suggestions?

  Hello

  Go to BIOS and set it to default settings.

  In this case the SATA mode must be on AHCI. In this case the SATA drivers are required to install the Windows operating system. But as much as I know that Windows 7 already contains the SATA drivers if usually you don t had to add SATA drivers while OS installation the installation program.

  However, here is a nice HowTo document that helps you add SATA drivers for Win XP installation disc.

  + How to integrate a SATA AHCI driver into a Windows XP Setup CD.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  + How to integrate the AHCI driver during the installation of Windows XP.
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

• Satego X 200 - 21U - where to find the XP SATA driver for install XP

  I have laptop Satego X 200 - 21U with installed Windows Vista.
  Where can I find the driver for SATA drive so I could install Windows XP?
  HARD drive is Hitachi hts 541616j9sa00.

  Hello

  The SATA driver is part of the Intel Storage Manager.
  You can download the Storage Manager Intel since the European driver Toshiba page.

  The package contains the F6hlpy folder that contains the files needed for the SATA.

  These files must be included for the Windows XP CD using free software called nLite.

  Google for nLite to get and find more details.

  Good bye

• Satego X 200-SATA driver for windows XP required

  Hello... J need a SATA driver for windows XP
  Help PlZ... .thanks

  At only a short suggestion:

  Solution was published a long time here in the forum.
  Check this box:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040

  Good bye

• How do I not what SATA driver do I need for the Satellite L300 - 03C

  How do I not what SATA driver do I need for the Satellite L300 - 03C so I can make nlite

  Hello

  Your laptop seems to be a Satellite L300 - 03C PSLB8C-03C01X.
  As already indicated on your first visit to thread the Toshiba Canada page and choose this model of laptop on the driver page.
  http://209.167.114.38/support/download/ln_bymodel.asp

  Then download the Intel Matrix Storage Manager (SATA) - image of floppy drive. It of for Vista, but the files in this package should work with Win XP too.
  Include these files using nLite to create the new disk Win XP that contains SATA drivers.

  Finally use this disk to start.

• HP envy 750: attempt to add to new PC SATA drive

  You want new 750-150xt to which I want to add my old Pavilion 6380 640 GB SATA drive.  6380 road was only the disk and the disk to boot under Windows 7 64-bit.  Envy has a 256GB SSD as boot drive and a data HD 1 TB drive.

  Pulled out of 6380 and added to the Bay, third player hooked up a new "SATA3" on MB black SATA cable and power cable to the drive then gave.  Noticed in passing that my SATA cable did not have a ground wire wrapped with her which was attached to the chassis of the new PC.

  By turning on the PC, it would not go beyond the HP splash screen.   Disconnected former player and removed, and the envy of 150 started very well except the logon screen "grated" for 1-2 seconds, then stabilized.  Seems to work normally.

  FYI - SATA3 socket on MB was a red taken versus black and only available SATA labeled sockets.  Others were all occupied.

  Any thoughts?

  So what is the connected CD drive? Must be the SATA 2. If she jumps from the 1 SATA to SATA 3 something should be available here. The question is not only the availability of a place to connect, it is that the software has progressed where you were with this player and Windows 8/10 uses a completely different approach to find and boot from hard drives.

• There is an option in the bios to set the sata drive * IDE *-mode?

  There is an option in the bios to set the sata drive * IDE *-mode?

  Grobi

  Hi dude

  That s a funny question.
  No, there is no option in the BIOS!

  Please understand that there are various interfaces to drive HARD. IDE and SATA.

  There is a big difference between the two interfaces and the function of the HARD disk on the motherboard controller, you could use a HDD IDE or SATA HDD.

  But you cannot connect a SATA HDD to IDE or IDE HDD controller for the SATA controller. This is not possible due to different hardware.
  This is not possible and that's why these BIOS settings are not available or don t exist!

  Good bye

• Satellite A300 - where can I find the SATA driver?

  Where can I find the SATA driver for Toshiba Satellite A300 1MW for Windows XP?
  I tried to find it here:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  There are a lot of drivers, but none for SATA.
  and here: http://downloadcenter.intel.com/
  Here I can't find appropriate for my model injector.
  Thank you in advance for your help!

  Hello!

  The SATA drivers are in the Intel Storage Manager, so you need to download this package.
  You can find it on the Toshiba site and on the Intel Web site.

  Check again for Intel Storage Manager Web sites.

  Good bye

• Satellite A100-158 connects to the WLAN but not to internet

  I have a Satellite A100-158. It is used to disconnect frequently the network wireless in my house, but now even if the connection still appears on the program of Intel PROset/wireless and is shown as connected, I can not access the internet more. I don't know what the problem might be that the wireless signal is excellent.

  For the moment, I plugged the Ethernet cable to the router to access the internet. Does anyone have any suggestions as to what could be the problem?

  Hello

  I can't provide the exactly the solution to this problem of WiFi, but I think you should check the whole parameters on the WLan router.
  First, you must remove all security settings such as encryption key and MAC address filtering.

  Then check the settings of the laptop. If you use a Wlan configuration tool as Utility Intel ProSet windows has the configuration option must be disabled!
  In addition, access the Wlan properties and check the TCP/IP protocol settings.
  The IP address, subnet mask, and the default rejuvenation should be set to automatic

  Good luck and look at a few

• Satellite A200 - 23Q PSAE6E - what SATA driver should be used with Vista Pro

  What SATA driver for toshiba Satellite A200 - 23Q PSAE6E should be used for Vista is.

  Where can I find.

  Hello

  You need the Intel Matrix Storage Manger.
  This package contains the SATA drivers.

  Here is a link to the page from Intel:
  [Intel® Matrix Storage Manager | http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=2101]

  Concerning

• Satellite A100-158: fan is always on with BIOS 5.9

  Hello.

  I have an a100-158 and use Windows XP and I installed the BIOS 5.9. I noticed bios versions 5.x are for those who use Vista so the cooler still works because of the Aero interface.

  When I got the BIOS 1.3 the cooler was quiet but now with 5.9 the cooler makes a lot of noise and that is not very comfortable for study to the laptoc near us...

  No chance to solve this problem?

  The A100-158 belongs to the PSAA9E series and it was delivered with the XP and with Phoenix BIOS am I good?

  Well well, a question; Why update you the BIOS if the laptop works properly. You know that BIOS update is always risky and should be only last resort to solve any problems.

  However, I recommend to reinstall the Toshiba power saver and change the settings in the menu of basic-> cooling methods

  Maybe it helps.

  If note, you will need to set the BIOS to the original version. But in this case, the ASP must be contacted ;(

  Good luck

• Satelite L40 - 17U: Sata driver WinXP

  This problem is not that hard to fix, but I'm looking for the driver but I can't find it. And don't tell me to go to the page for downloading drivers for my L40 - 17U because I was there and you get not only the driver that I am looking for it.
  Each driver else I get the it. So help me through the Please this problem. I formatted my laptop which has vista home basic on because I want to install XP Pro.
  Now the thing is my laptop says "drive not found" I know how to solve the problem. Here's the method (you need a CD in Windows XP Sata driver for your laptop to XP, the program nlite and a clean CD):
  Take a CD of Windows XP and the program nlite to integrate driver sata + XP files from the original XP CD on the own CD.
  The process is not that difficult, but you have all the software and drivers for your laptop for Windows XP. The driver, I'm fighting for is the sata driver. Can someone help me know where to find the sata for my L40-17U dirver - please?

  Here are the specifications of my laptop of neede to get the driver for xp sata:
  model No.: PSL48E-02P031ZA
  Processor: Dual-Core T2330 1.6 GHz

  If you need more information please let me know and I will it provide.

  Post edited by: chvw1987

  > And tell me to go to the page for downloading drivers for my L40 - 17U because I was there and you get not only the driver that I am looking for it.

  I put t think you know what you're talking about.
  I've visited the European driver of Toshiba page and yes I checked the L40 PSL48E and YES download area I found the SATA driver!

  Intel Storage Manager contains the necessary SATA driver!

  As you suggest, you can create a new Win XP CD and could include the SATA driver to this page using the nLite.
  It of not complicated and gentle

  Recommend to check this