ARD 3.8 wake from sleep does not not on El Capitan

Similar Questions

• iMac 27 "2012 wake from sleep does not start

  Lately, my iMac 27 "not correctly woke from sleep mode.  When I try to enter the password, the computer manufactures its own string of numbers in the box and then refuses to open.  The only way I can boot the computer should turn off by the button on the back and to be able to use it on.  But after using the computer and either put to sleep or if he puts himself to sleep after, I have the same problem.  I tried to reset the SMC and the PRAM, but the problem persists the next time I try to use the computer in sleep mode.  Any suggestions?  Thank you.

  iMac 27 "end 2012 with El Capitan 10.11.2

  Maybe a new battery in the keyboard (even if the existing is not empty), then in settings Bluetooth remove and redo the pair.

• my computer would not wake from sleep when the cover iclose & open again?

  When I close the lid on my computer & open it again, the computer does not wake up, it shows just a black screen!

  Hi George,.

  From the description of the problem, it seems that the computer would not wake from sleep when you close the lid and open it again. I understand the inconvenience.

  Let us, try to perform the following methods and check if it helps.

  Method 1: Run the troubleshooter of power

  Open the troubleshooter of power

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  For more information, connect to:

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Method 2: Troubleshoot wake the computer from sleep mode

  http://support.Microsoft.com/kb/266283

  Method 3: Update Chipset drivers

  Download and install the latest version of drivers for chipset for the computer on the computer manufacturer site and check if you are faced with the same question.

  Method 4: Run the BIOS update

  I would say as you perform the update of the BIOS by contacting the manufacturer of the computer, check if it helps.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you

• Satellite U500 - may not wake from sleep

  Hi all

  I have a Satellite U500 laptop win7 64 bit and my system may not wake from sleep mode.
  "Standby mode" when I press the power button or any key of the keypad power led lights up but the screen stays black and the system is unusable.

  Any help?

  Have you noticed this problem in the first moments after upgrade to Win7?
  I assume that you made a mistake with Vista?

  Have you noticed the same behavior when you use hibernation mode?

• How can I PREVENT Time Machine back on the wake from sleep?

  I leave my machine on the work week and when I finished the night, I SLEEP there.

  In the morning, he has no need to backup first thing. But Time Machine insists on execution from the moment I have a mouse and he wakes up from his sleep.

  It was fine when it was new and fast, but now he is old and slow (especially - but mostly because I really push to the limit with multiple Safari Windows opens and executes a large number of software design at the same time, I have to do for work).

  My question is simple:

  How to tell Time Machine to does not have a return on the wake from sleep? or;

  Say this do not back up from 06:00 to noon? or;

  Is it a third party plug in that allows me to customize the time Machine more?

  Another idea on what just said or it to no return for even the first hour or two when it comes in the morning or even in any time to sleep during the day. Automatically.

  I also have my drive main external file mirroring AND use Super Duper once per day to fool the internal drive (I total plan control) AND back up all files off site (I total plan control). But, Time Machine is also always at hand to get it done. If only I had a little control over it, so she did not have the necessary step back up the minute I sit down. Significantly slow down my work time productive morning!

  Time Machine really shouldn't bog down your machine that badly.

  If Time machine running interferes with your ability to use the machine, then something else is wrong. It shouldn't affect performance in this way.

  If it's all just "annoying"... Well... Why is this a big deal?

  Maybe you should run a report Etrecheck and post the results here. If something is moving your system, which can help us identify what it is.

• eHome IR transmitter fails to wake from sleep

  I am running Windows 7 64 bit on an HP box bought less than a year ago.  A Hauppauge 2250 tuner card is installed.  The tuner card is connected to my Comcast Cable box by an IR transmitter.  The system worked well for months, but now I find that the IR Transmitter is not working after coming out of sleep mode.  Reboot and everything works well again.

  How can I get the IR transmitter to continue functioning when the computer wakes from sleep?

  THX,

  Ross

  first thing to do is to try a system restore to the last time it worked.
   
  Friday, January 28, 2011 00:48:59 + 0000, Ross321 wrote:
   
  >
  >
  > It does not work yet, so I'm at square one.  Anyone with ideas / measures to try, please let me know.
  >
  > - Ross
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Fallout 3 stops working after the computer wakes from sleep

  Since the games for Windows Live 3 is out, Fallout 3 has never been the same. He used to work at best my GfWL and now her nightmare. Recently, after that I quit the game and put my computer to sleep, Fallout 3 will stop working completely after wake up. I try to start it and I get them all is a cursor with a small blue rotating light. What is even more strange, is that my computer goes into a State of semi who no longer meet this point where programs and keyboard shortcuts no longer work, but I can browse my hard drive. I try control + SHIFT + ESC to see what the devil but that causes Windows Explorer to stop working. CTRL + Alt + Delete does not work either. No matter what I try, once I start Fallout 3 after the computer wakes from sleep, I can't do the task to the top manager and I can't use my computer. The only way to get it is to hit the reset button or turn off manually. Can someone please help to get rid of this problem?

  Hi murphy449,

  1. did you of recent changes on the computer?

  2. the problem only happens when you start fallout 3 after the sleep mode?

  3. are you able to wake the computer quits successfully sleep mode?

  4. What is the version of Windows installed on the computer?

  Method 1

  I suggest that you manually download and install the latest drivers for display on the computer card and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2

  If the previous step fails then I suggest that you try the clean boot procedure to check whether a third-party program installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails then I suggest you check the observer after return with details and events for the cause.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• (Redirected) XPS 13 Ultrabook wake from sleep!

  Hello!

  I have a Dell XPS 13 ultrabook I love, apart from a major problem. I can't seem to wake from sleep using the keyboard or the mouse. I never had this experience with a laptop before.  It is a pretty big problem, I use the XPS 13 has docked at the D3100 docking station and connected to an external monitor, keyboard, and mouse.  I keep the laptop with the screen closed and just use the external Setup - as you usually would when it is docked. Everything is fine until the device goes to sleep. If the computer is still on, but just the external monitor is turned off because the power settings, and then moving the mouse/hit the keyboard to wake the rear monitor. However, if the computer is idle (NOT put in hibernation), it nothing happens when I move the mouse or repeatedly hit the keyboard. I need to get out the ultrabook the cubby that's in, open, hit the power button, then close and replace. He gets the computer turns on again, but is incredibly annoying. As a side effect of this, all my windows get resized and my icons moved the Office because the latop temporarily switches to the built-in screen (which is at a resolution lower than my external monitor) before returning to the external display. I had the Latitude laptop for years without any problems and was disappointed with this experience. I really hope that there is some sort of fix.

  So far I have tried:

  1. connect the receiver of keyboard/mouse wireless in all USB ports on the ultrabook itself and also the dock of the D3100. No difference is made.

  2. try with a wired keyboard and wireless. No difference is made.

  3 tent to shoot to the top of the mouse/keyboard power management settings in device management and ensure "Allow device to wake the computer" is checked. Not possible, "Power management" tab appears now available in Windows 10 in the device properties window.

  Help, please!

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Why Edge E430 wake from sleep?

  My new E430 Edge wakes from sleep inexplicably.

  Under the power plan, I have timers wake disabled for battery and AC power. Under scheduled tasks, I went through each scheduled task and not one "allow the waking from sleep" checked. Yet the machine spontaneously wakes up from his sleep (i.e. without human intervention) after 3 hours.

  How can I determine which task is originally wake? (Is it conceivable that could do it my LAN?)

  Maybe it's a coincidence, but: in Lenovo Power Manager 6, on the Global tab, I've disabled USB case and 30 days of standby. Since then, the machine remains asleep (without even a Lullaby).

• I tried to update my Adobe's Flash Player.   Flash Player from Adobe, does not open on my Macbook pro. The message said that it was not downloaded from Mac App store. The Mac app store, Adobe flash player is not listed. Help!.

  I want to update flash player on my Macbook Pro with the latest operating system.  Help!

  Flash player downloaded from Adobe does not open because there was no Mac App store.

  Help!

  Only download from Adobe

  https://get.Adobe.com/flashplayer/

  You can do going in system preferences, look for Flash Player down. Click the icon and check the update

  

  If you are upgraded you will see

  Adobe® Flash® Player is up to date on this system.

• Photos from Apple does not open

  Photos from Apple does not open on the slider.

  You can maintain the option command buttons launching Photos to run repair.

• PC HP ENVY 15 x 360: Notebook wake from sleep after upgrade Windows 10

  Upgrade to Windows 10 in late July-(I should have known mieux qu'àle niveau puisque j'ai eu un an pour le faire). -now computer laptop won't wake sleep withoout a button hard shutdown and reboot.

  Have followed the instructions on the HP keyboard activation Web site, allowing you to wake from sleep, bios update and to automatic updates for windows and HP.

  Please help, it's crazy to restart my laptop every time I walk away from it for awhile.

  Product number: G6T85UA #ABA
  BIOS:F.26-01/19/2015
  Keyboard Review: 89.23
  Total memory: 8.00 GB
  Name:Intel (R) processor Core i7-4510U CPU @ 2.00GHz

  Check out this post and see if it will apply/help to:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/how-to-resolve-post-Windows-10-upgrade-issues-on-HP-laptops/m-p/5209825/highlight/true#M309942

• Why do I get a message from Script does not

  Whenever I turn on my computer and go on the internet (Firefox), I get a message from script does not always.  I always click the stop script.  For up to about half an hour, the computer is very slow and sometimes does not.  After about half an hour, the computer starts more smoothly.

  The complete message, I just had was: A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script ends.

  Script: chrome://divxhtml5/content/script.js:6

  I use norton 360 and Malwarebytes anti-malware to scan my computer for viruses and also auslogics disk defrag every week.  I also use Windows Vista, which he said can cause some problems.

  I spoke to a staff member of my internet provider who told me it was a simple problem to solve, but they could not advise me on how to do it.

  Thanks for any help.

  Hi johne278,

  Thanks for posting in the Microsoft Community.

  Please answer the question-

  This problem occur on Internet Explorer as well?

  Method-

  If the problem is specific to Firefox, so I'd like you to contact the Support of Mozilla Firefox and post a question the Mozilla Forums as well.

  We know if you need help. We will be happy to help you.

  Thank you.

• Auto-Sleep does not work then in the lock screen

  As the title says, I set automatic standby after 30 minutes of idle time of the computer, but it only works when I'm on the desktop, if I'm not connected (lock screen), auto sleep does not work, how can I solve this problem?

  Hello

  A power plan is a collection of hardware and system settings (such as the display, sleep, etc.) who manages the way your PC uses power. Lock screen the console after the deadline option must be added to the advanced power settings.

  Change power management and check.

  Power plans: frequently asked questions.

  http://Windows.Microsoft.com/en-in/Windows/power-plans-FAQ#1TC=Windows-8

• elitedesk 800 does not wake from sleep, performed a start rather

  HP EliteDesk 800 G1 USDT Win8.1 Pro 64-bit

  After the sleep mode to not wake up the keyboard or mouse click.

  Pressing the key Power performed a clean boot from the stop.

  Computer came with Windows 7 Pro. I installed Windows 8 since the disks provided with the computer and improved online at Windows 8.1. Everything seems to work fine, but the modes of Eve/hibertation.

  By pressing on a keyboard or screen sleep button apparently sends computer standby: the screen is black, white power button mouse and keyboard LED off, LED blinks once every two seconds.

  However computer not wakes up on a key on the keyboard and pressing a button / a computer turns on, but does boot upward as if it were completely off.

  Already checked for the latest version of the BIOS and enabled for keyboard and mouse power management.

  Hi Jaco,

  Thanks for your suggestion. I tried to experiment with the settings of power for the keyboard and the mouse, and simply made sure that both are enabled to wake the computer from sleep mode. I began to suspect that he may be the controller USB keyboard to wake the computer asleep, and I've experimented with a PS/2 keyboard without result.

  Then I reread in BIOS settings help mode "standby" should be indicated in triple LED flash, and I was getting only single blink of the LED, and I started to look into each option in Advanced settings of the power management and guess what I found?

  THE SOLUTION

  When I turned the sleep > allow hybrid sleep set Off, "sleep mode" started working:

  By pressing on the sleep button sends computer mode 'sleep', white LED travels triple flash and two seconds apart, and by pressing a key on the keyboard wakes the computer.

  Apparently my hardware configuration somehow comes into conflict with the Win8 hybrid sleep mode. SSD?

  HP EliteDesk 800 G1 USDT Core i7-4770 8 GB (2x4GB) DDR3 256 GB SDD,

  DVD +/-RW, keyboard, mouse, GigLAN,

  WIN8.1 Pro 64

  Thanks to all for lead me to this solution!