Are any shadow copies of my Illustrator files?

Similar Questions

• Shadow copies?

  There is an option in the "Disk Cleanup" where we can also delete old restore the system and "shadow copies".

  What are the "Shadow Copies"? And where are they to be considered. A person may open these files and watch them.

  A person can delete snapshots without removing the system restore points?

  Also:

  How can I open 'Windows Explorer'?

  I can't do it. Always there is the old "Windows Explorer" in Win7?

  I try and all that opens looks that the folder 'My Documents '.

  Is there a 'Run' command to get there?

  The date of your user folder creation (in the Properties tab of cases) usually coincides with the date of installation of the current operating system, if you use a custom / non - OEM (DELL, HP, etc.) build the machine.

  -Or...

  Open the command prompt and type - systeminfo | find/i 'date' (include the quotes).

  Note that if Windows had a "repair" reinstall the date of the repair reinstall, that's what will show,

  as if it were an original 'clean' reinstall, and if the OS was cloned migrated to a new machine it

  will show again that this is the date from the previous machine.

  - Speccy - Standard -try this for the installation date and a whole bunch of other system information.

  -You make a new System Restore point after 'cleaning up' by the 'old', Yes?

  .

• How can I check that my copies of my personal files are on the DVD backup created?

  Original title: backup (bssic)

  I always use the Basic (datasafe not updated) backup

  How can I check that my copies of my personal files are on the DVD backup created.

  Can I see a proof without actually deleting a file and try to recover the DVD

  I have no confidence with him at the present time, after seeing the various problems on the forum

  Hello

  Thanks to Mir... for explanations.

  I don't think I'm that close properly. I tried to shut down e-mail but think I did it without writing anything (what is now). I've been around all 22 replies and then got lost

  I bought today the local backup from dell datasafe (cleverbridge).

  I hope so, I'd be able to print all the 22 responses within the email (?) I would like to, instead of printing the current response only. I like being able to see things on paper, and not only within windows.

  These forums are a great idea.  DellConnect is not always the best method, I do not seem to 'chat' option for XPS laptop.

  Thanks again

• I just bought an iMac running 10.11.2 so bought a full subscription to Adobe Photoshop CC crashes when you open an illustrator file, when I stick a layer copied, etc.. I have for that to be resolved. All software are up to date.

  I need assistance with PS CC 2015. It continues to crash when you open an Illustrator file, paste a new layer, etc.

  All software are up to date. I'm running an IMAC with OS X 10.11.2.

  Please fix!

  Thank you.

  Please see the problems of fonts in Adobe applications. Mac OS X

  It seems Photoshop crashes because of corrupt fonts in your system folder / I

  Kind regards

  Assani

• I created a file in Photoshop CS5 (photo) and another in Illustrator CS5 (a graph) to place in my InDesign CS5 brochure. When Photoshop and Illustrator files are placed in InDesign, they seem blurry - read in InDesign, printed or saved as

  I created a file in Photoshop CS5 (photo) and another in Illustrator CS5 (a graph) to place in my InDesign CS5 brochure. When Photoshop and Illustrator files are placed in InDesign, they seem blurry - read in InDesign, printed or saved in PDF format. Can someone give me some advice on how to fix this? Thank you!

  View blurry in InDesign: choose View > display performance > high quality screen

  Blurry printing InDesign: Choose file > print > graphics > Images > data send: all

  Fuzzy in PDF format: fix above points first. make sure that the links are up-to-date; post a screenshot here your PDF export settings.

• Music Flder removed in Vista Home Basic. Need to access shadow copies...

  Hello.  Recently, I deleted one of my music files in my user folder, and it went into deletion permanent, even without pressing SHIFT + DELETE, the file being too large.  So, I hear about how Vista Business, Enterprise and Ultimate can access shadow copies of files.  The question is, is it possible to do this in Vista Home Basic, by using all means and if not, are there any REASONABLE alternatives?

  Thanks for the help, but I could find a nother program called restoration until I checked here.  Thanks for the help. (if you want the URL, reply back and I'll edit.)

• How can we prevent the Explorer of research according to the records of multiple copies of the same file?

  Several slightly different copies of the same file, but subfolders will appear in Windows 7 when you perform a global search for files with specific attributes (e.g., size, date, extension).  If you delete a file, you really are by deleting all the files reported.  What are the steps to perform a search and don't report the real file rather than multiple versions of shadow or shortcut of the file?

  Example:
  Research on all files on the C drive beyond 1 GB, I receive a report in which there are 4 files
  games_file. ISO 7,084,400,688 1/1/2011 12:00 am a C:\Documents and settings\COMPUTER\Documents\Stuff\Apps
  games_file. ISO 7,084,400,688 1/1/2011 12:00 am a C:\Documents and settings\COMPUTER\My Documents\Stuff\Apps
  games_file. ISO 7,084,400,688 1/1/2011 12:00 am by C:\Users\COMPUTER\Documents\Stuff\Apps
  games_file. ISO 7,084,400,688 1/1/2011 12:00 am has C:\Users\COMPUTER\My Documents\Stuff\Apps

  WOW - I can save 21 GB deleting 3 files, right?  Nope, it's all the same physical file.  It should be reported as such.

  Hello

  I suggest to check indexed locations and make sure that duplicate records are not explicitly added. If they do, delete or rebuild the search index and check if the problem is still there

  Change advanced indexing options

  http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options

  If the problem persists, then create a new user account and verify.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Create a test file in the same location, and check if the same file is returned multiple times.

  If this isn't the case, then follow the steps mentioned in the link to transfer data from the old user account for the new user account.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• AA CS6 on multitrack logon each time creates new copies of related audio files?

  I have problem with my multitrack session created. I work with Adobe Audition CS6 and everytime when I open the multitrack session it creates new copies of related audio files. There are about 10 audio files related to my session. They are all on the same my hard drive of the PC. These audio files with names: "tik_chorus_3", "tik_chorus-end_2", "tik_chorus-end_3"... When I opened the session I see these files on the slopes with longer names: 'tik_chorus_3 48000 1 "," tik_chorus-end_2 48000 1 ',' tik_chorus-end_3 48000 1 "...» Next time it would be: "tik_chorus_3 48000 1 48000 1", "tik_chorus-end_2 48000 1 48000 1 ',' tik_chorus-end_3 48000 1 48000 1"...» And it records these large wav file in the same folder. I do not really need them. Please, help me, because I don't understand what is happening.

  Thanx

  Well, if save files with an addition of 48000 at the name, it indicates that the session rate and the rate of the files you use in it are not the same. What probably happens then is that when you open the session again, he re - samples these original files in the session rate and try to save them as such. What hearing detects then - what is exactly what happened the last time, so he sticks a further extension on the end. And it will continue to do so whenever you reopen the session!

  I think at first glance, you must either create a new session at the same pace that files you use, or re - sample files in the waveform and use the re-sampled as a basis for your session, so it does not go through the effort any re - sample each time it is opened.

• The dashed lines in my Illustrator file deform when I copy/paste the in Excel. Otherwise, the image is fine. What I am doing wrong?

  The dashed lines in my Illustrator file deform when I copy/paste the in Excel. Otherwise, the image is fine. What I am doing wrong?

  The lines end up looking much bigger than they were initially.

  I am using the paste special option in Excel and it works fine for all parts of the image, but this.

  Someone suggested I try to use the Mode plotted, but who has not made a difference when I tried.

  The map view wouldn't make any difference, so more clarification is needed on your workflow.

  Why it's not working for you save the image as a png image in Illustrator and then insert it correctly as a picture in Excel?

  What are you trying to make to it after that's in Excel? If the PNG workflow does not work for you, then explain your workflow. It might help to know if you're Mac or Windows and the version numbers and maybe screenshots.

• After effects CC corrupt Illustrator file?

  Hello!

  I worked on sequels with animation, but after doing with animate and make the .mov and .mp4 file, part of one of the illustration files became corrupted? You can see here below, with the cat.

  

  Is that the back of the legs of the cat, the rest of my animation still works as before. I got messages showing that my hard drive was almost full lately, but everything in the animation works as before (the .mov file looks like perfectly) except when I did a .mp4 file.

  I'm only a beginner with after effects and I looked in forums everywhere to find answers, but nothing explains my problem.

  did anyone of you knows what to do? I need to change a second time to improve my animation, but this surely isn't an improvement.

  You have moved the layer with the puppet pin applied. You can't do that.

  

  Puppet pin defines a mesh of the alpha chanel of the layer when you place the first pin. When you are using puppet pin, it is important to turn on the mesh, so you can see what parts of the image it is covering. If you had a puppet like this and the expansion was wet too wide mesh cover the arms and the body so that you can not move arms independently.

  

  Move the arm gives you this:

  

  Change the extension of 5 pixels mask solves the problem completely:

  

  If you to scale or move the layer after applying a puppet pin that the mesh is going to stay in it is original position and the effect will be broken.

  

  Any decent tutorial on using the puppet pin should have covered these basic rules for the workflow. The solution is to make your puppet using only the pins of puppets or make your puppet move, call before you move all attributes to the new model and then move the entire layer.

  For instructions on the use of the pin type puppet 'puppet ' corner in the search help field in the upper right of After Effects, and learn about the resources of the community.

• problem of cs6 Illustrator files for the web conversion

  I have designed some simple logos in Illustrator CS6 and convert .ai files to appear on a Web site, but when I use the Save for Web feature and preview the files GIF or PNG - 8s, I created that they are fuzzy and not a pretty good quality, even when seen at actual size. I realize there will be differences between the vector graphics in Illustrator and the images of pixels on a Web site of the office, but these are more that a minimal adjustment - they look out of focus. I'm doing something wrong? I create Illustrator files that are too large or too small? Or am I convert art into GIF or PNG-8 files are the right size or shape? I have searched the forums and the web for a solution, but found nothing on this. Any help would be appreciated.

  LAN

  If you checked one of the optimization options hidden in the window the size of the Image?

  Have you considered PNG24 with richer colors?

• Quality problem with Illustrator files containing transparencies

  Im having a problem with some of my Illustrator files (related in Indesign). They look flawless in illustrator, however when I place images in indesign I find that their resolution is subpar. The performance of display is to display the highest quality and only the parts of the image seem to be affected. More than a few of the trasparencies seem to have this problem. I removed the transparency in the image below, and the image seems to work correctly when relinked. You can see below, I used a transparent circle to call an area, but he has a messed up way wiith the quality of illustration (although in some of the region). The problem is causeing some of my lines to become pixalated and not even in the area below the transparentcy. Any advice you could give me would be great its been giving me a headache.

  

  Save as PDF in Illustrator using the PDF/X-4 settings and place the resulting in InDesign PDF file. See if it improves your results!

  -Dov

• What is a structured layered illustrator file?

  Hello

  IM currently converting vector images, they asked some images can I supply in a 'illustrator file structured in layers ".

  IM relatively experienced with Illustrator and have never come across the term before im assuming they mean simply that they want the AI. file with all layers maintained?

  Any help would be greatly appreciated.

  Thank you
  

  Hello

  I enclose the image. The image was redrawn at first and then I manually drew on each piece of the picture then yes it is pulled manually there are approximately 50-70 layers.

  Thank you

• InDesign 5.5 - Type with shadow placed in front of the gray area causes 'shadow box '. Same Graphics

  I exported the document to InDesign 5.5 using PDFX-4 and sent to the printer. Evidence of the printer were a problem in some places:

  1. in InDesign, white type with a drop shadow is placed on a background area that contains a graphic of Illustrator placed grayscale. In the event, behind the type box appears a yellow-greyish shade.

  2. in InDesign, a photo (placed the grayscale Photoshop file), with a shadow border and drop white, is placed on a gray background area (CMYK). In the event, behind the chart area and the shadow appears a grey shadow (lighter than the shadow) area.

  The printer told me that there not PDFX-4. I can't work using PDFX-3 (1.3). Who will solve the problem, or is there another problem?

  The printer needs to go to press, so do not have much time.

  Post edited by: Stormcloud492

  You should probably ask in the InDesign forum. It looks like everything you do is specific InDesign.

• Export of layers in Illustrator files

  Hello

  It seems that there are some people who want to do what I do. I have a graphic made up of different elements in CS4. I have distributed to each of these elements to separate the layers by layers / release to layers (sequence). For an opinion on what I'm trying to do, I have 136 layers and I don't want to save each of them individually by hand!

  I would now like to each of these layers that save Illustrator files.

  There are two factors that I need to consider:

  1. As these individual files will be drawn to Apple Motion 5 comes alive, it is important that the script or plugin to save the files retains the positioning of the element compared to the artboard.
  2. Is it is not possible to maintain the positioning of the element compared to the artboard, I have placed 2, 1 pixel by 1 pixel "dots" in the corners opposite the artboard on a locked, individual layer. The script or the plugin could alternatively export every element layer in a new file, including these two points in each file to give movement to work with limitations.

  I met many plugins that save as png or PDF layers, but what is important, I need to keep the images as vectors. I also need to keep the elements positioned in the artboard.

  I also met two scripts here: http://forums.Adobe.com/message/2759051 , but the first script seems unnecessary (in my case, it saves 136 files with all items) and the second script gives me an error of syntax for the line " " " -get a list of the files in the files to be processed in the sourceFolder".

  Any advice you could please lend would be most appreciated.

  Thank you very much.

  Try this

  /*
  * Description: An Adobe Illustrator script that export each layer as a file separated. For Illustrator CS 4 +.
  * Use: Name of the layer is added in the name of the file. Rename the layers if necessary.
  * It is a first version that has not been sufficiently tested. Use at your own risk.
  * License: GNU General Public License Version 3. (http://www.gnu.org/licenses/gpl-3.0-standalone.html)
  *
  * Copyright (c) 2010, William Ngan
  http://www.metaphorical.NET

  This program is free software: you can redistribute it and/or modify it
  it under the terms of the GNU General Public License such as published by
  the Free Software Foundation, either version 3 of the license, or
  (at your option) any later version.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty
  MARKET QUALITY or ADEQUACY has a SPECIAL USE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  with this program.  If not, see http://www.gnu.org/licenses/>.

  */

  var doc = app.activeDocument;
  var docname = (doc.name.split('.')) [0] ; name
  var doc_artboard = doc.artboards [0] .artboardRect;

  If (app.documents.length > 1) {}
  Alert ("Please close other documents and rerun the script ');
  } else {}

  var ok = confirm ("Please save your original file before continue.\n\nLayer files will be saved in the same folder as the original file. Original file will be closed without saving.\n\nContinue? ») ;

  If {(ok)

  prepare layers
  for (var i = 0; i)
  doc. Layers [i]. Visible = false;
  }

  go through each layers
  for (var i = 0; i)
  app.activeDocument = doc;

  If (i > 0) doc.layers [i - 1] .visible = false;
  doc. Layers [i]. Visible = true;
  doc.activeLayer = doc.layers [i];

  saveAI (doc.path, doc.activeLayer.name, i);
  }

  Close the original file without saving changes
  doc. Close (SaveOptions.DONOTSAVECHANGES);
     
  }

  }

  function saveAI (path, name, id) {}
     
  var currlayer = doc.layers [id];
  var g = currlayer.groupItems.add ();
  Group (g, currlayer.pageItems);
     
  var t = g.top;
  var l = g.left;

  var newdoc = app.documents.add (doc.documentColorSpace, doc.width, doc.height);
  newDoc.artboards [0] .artboardRect = doc_artboard;
  var newlayer = newdoc.layers [0];
     
  g.Duplicate (newlayer, ElementPlacement.PLACEATBEGINNING);
  newlayer.pageItems [0] .top = t;
  newlayer.pageItems [0] .left = l;

  path.changePath (docname + "_" + name + ".ai");

  newdoc.saveAs (path);
  newDoc.Close (SaveOptions.DONOTSAVECHANGES);
     
             
  Wait for the new file to save and close it before you continue.
  A (if possible) callback function be better that a while loop for sure.
  While (app.documents.length > 1) {}
  continue;
  }
  }

  function group (gg, items) {}

  var newItem;
  for (var i = items.length - 1; i > = 0; i--) {}
         
  If (items [i]! = gg) {}
  newItem is items [i] .move (gg, ElementPlacement.PLACEATBEGINNING);.
  }
  }
  }