Music Flder removed in Vista Home Basic. Need to access shadow copies...

Similar Questions

• Windows Vista Home Basic 'local only' access via ADSL router, broudband

  Hello

  I've set up a new router broadband wireless ADSL to connect to my broadband PostOffice.com existing Standard.

  The router is a Belkin F7D1401uk Surf N150 model.

  It is facing up and running and I can use other machines to connect to the internet through it. A netbook running Windos XP SP3 and a mobile phone (Nokia X 6), but my laptop main running Windows Viast Home Basic SP2 (32 bit) do not have wireless internet access.

  It is a Fujitsu Siemens Amilo Li 2727 laptop. If I connect to the new Belkin router using an ethernet cable, I can connect to the internet. But when I unplug the ethernet cable and turn on the WiFi I see a connection to the modem Belkin Wireless, but on an 'unidentified network' and with 'local access' only.

  Here is a copy of what I get when I run "ipconfig/all" at the command prompt:

  Windows IP configuration

  Name of the host...: Clare-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: Belkin

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : Belkin
  ... Description: Atheros AR5007EG Wireless Network adapt
  Physical address.... : 00-16-44-E8-64-2C
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::4d89:e63c:ba6c:1c4d % 11 (Preferred)
  IPv4 address: 192.168.2.3 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: April 3, 2011 15:59:55
  End of the lease...: May 11, 2147 00:41:44
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DHCPv6 IOOKING...: 268441156
  DHCPv6 DUID customer...: 00-01-00-01-13-A7-2B-7F-00-1F-16-00-9E-C4
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : Belkin
  Description...: Realtek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.0)
  Physical address.... : 00-1F-16-00-9E-C4
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 12:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : Belkin
  ... Description: isatap. Belkin
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  So, it looks to me that use wireless I have an IP address and the default gateway and DNS servers are correct.
  But I do not understand why I "local access" only.

  Can anyone suggest what I can do to get my laptop connected wireless to the internet please?

  Kind regards
  David

  Hello Ttard,

  Thanks for your post.  One of the solutions, I saw about this problem is to go to your system manufacturer's Web site and download / install the latest driver for your computer wireless.

  This thread is very long, but has some great troubleshooting in steps.

  Please let us know if this information helps with your problem.

  See you soon

• Install software (games, etc.) doesn't show is not in the Add/Remove Programs Control Panel. Vista Home Basic, 32-bit.

  Vista Home Basic, 32-bit. Install software (games, etc.) does not not in Control Panel Add/Remove programs or CCleaner RevoUninstaller. They use all to. I don't know what has changed. Nothing new has been installed. How can I remove the software I want to uninstall? Thanks for your help.

  Hi il898,

  This can also occur if the installation files are broken or missing for the program which may be reason for the program does not appear in uninstall a program from the list.

  I suggest that you run the program to install the program again and check if you get an option to uninstall the program and try to uninstall the program.
  If it still does not uninstall the program, and then try to reinstall the program and uninstall afterwards.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need a windows vista Home Basic installation disc, I have a product of windows vista code, I had

  I have a hp conpaq turn and I don't have a Home Basic windows vista installation disc. the hp crashed and never booted up but recently I got windows 8 and I ins

  Hello

  With a HP Compaq laptop press you F11 on startup to start the recovery process.

  But, like the HP advises, if you install another Vista operating system, the recovery Partition is therefore more able to be used.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• Need help to buy the activation Code for Windows Vista Home Basic Edition

  Hi I am looking to buy a new Activation Code for Windows Vista Edition family Basic can help you

  Original title: activaction Code for Windows Vista Home Basic

  Hello

  See the article to get a new Windows product key:

  Get a new Windows product key

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-a-new-Windows-product-key

  http://support.Microsoft.com/common/international.aspx?RDPATH=DM;en-us;selectassist&target=assistance&SD=GN

  If you need assistance more support article about activation:
  Support for the Microsoft Product Activation issues
  http://support.Microsoft.com/GP/cu_sc_prodact_master

  See also:

  Activating Windows: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questions

  I hope this helps.

• Acer Aspire laptop with Vista Home Basic Edition does not, System Restore does not, sfc, find corrupt files but do not repair. Need help!

  Hi, I have an Acer laptop Aspire with Vista Home Basic Edition that came pre-installed, so no records only the disk hard drive partition.

  I turned on my laptop today and it starts but the loading bar of stalls at the black screen with "(c) Microsoft Corporation" and dragging green. The slide bar will continue to drag, but nothing else happens which means that I understand even as much as the login screen. I rebooted and tried Windows recovery, but the only remedy to what he suggests is a restoration of the system, which does not have any point, I try to restore it.

  To remedy this, I have connected in safe mode and ran the SFC command prompt. It scans my system and told to find corrupted files, but he can't heal some. This is where my knowledge limit runs out. I don't know how to fix the files that the SFC cannot. (Also I created a journal using the findstr command prompt and checked but it say anywhere that it was unable to fix it so I'm not even sure how to identify corrupted files)

  As it's an Acer laptop, Aspire I'll try their eRecovery tool to return my computer to factory settings, but it won't work in safe mode, and as I said I can not connect normally. I tried alt and F10 at the initial boot screen when I turn on, it loads the windows files and shows the Acer "Please wait a moment" screen and then nothing happens again.

  I can't afford to get it fixed, and there is no chance I can get a new laptop. Any ideas/help? Thank you.

  Hello

  You have t in Normal Mode to resolve problems by using upgrade repair facility that is SFC

  Read this topic eRecovery Acer.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  See you soon.

• need a product key for Vista Home Basic

  I upgraded a basic family xp on a Vista Home Basic, but the product key on the Tower didn't work, who can I get it for free?   s. o. s.

  I upgraded a basic family xp on a Vista Home Basic, but the product key on the Tower didn't work, who can I get it for free?   s. o. s.

  Hey armandohil

  Vista is not free

  you have to buy vista

  and microsoft sells more vista

  try amazon.com or ebay or your computer local store to see if they have copies of vista left

  Walter, the time zone traveller

• I can't seem to install SP1 with Vista Home Basic and receive the error code 80073712.

  I can't install SP1 with Vista Home Basic.  I get an error code 80073712.  I tried to install the system update readiness tool and it tells me that my system does not apply to it.  I know that I must have a file corrupted or damaged somewhere but don't know where. I'm confused. Can someone help me?

  Moved from Vista to install, upgrade and activate Forum.

  Original title: installation of SP1

  I know that I must have a file corrupted or damaged somewhere but don't know where. I'm confused. Can someone help me?

  Donald,

  The computer belongs to you or your employer?

  (When was the last time you checked your system for malicious programs?)

  In addition to using an anti-virus, as Malware/spyware scan:

  http://www.Malwarebytes.org/products/malwarebytes_free>

  (MBAM) Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  In addition, scan with the free Version of (SAS)

  http://www.SUPERAntiSpyware.com/onlinescan.html>

  `~`

  Click Start type cmd (you should see the command prompt fill up) right click and select run as administrator.

  Inside the command prompt, type sfc/scannow

  * Information about the System File Checker

  http://support.Microsoft.com/kb/929833>

  Reset

  `~`

  Run the link Fix It, you will find on this http://support.microsoft.com/mats/system_maintenance_for_windows/en-us>>

  `~`

  If no malware has been detected, then please download and Save the tool update system (or CheckSUR).
  http://support.Microsoft.com/kb/947821>

  Be sure to download the version of the tool that fits the computer architecture. If you don't know what it is, then click on the link under

  http://support.Microsoft.com/kb/827218/en-us>

  When the download is complete, please read this before you run CheckSUR.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135>

  Once you have configured and rebooted the system to clean boot state, run CheckSUR (. Windows6 0-KB947821-v10-x 86.msu or)
  Windows6.0 - KB947821-v10 - x64.MSU) with the system connected to the internet. It will download and try to fix the incompatible component store.

  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled.

  Open Control Panel > firewall Windows to check the native Vista Firewall now on.

  When CheckSUR finishes running, restart the computer.
  See if it can be updated now by opening Windows Update in Control Panel and clicking on the link to check for updates in the left frame.

  FYI

  If the tool (Checksur.exe) system update solves the problem, you will need repair Windows.

  `~`

  The time and date of this moment in British Colombia, Canada is 01:05

  Friday, February 14, 2014
  Pacific (PST) - 0800 UTC standard time

  UTC/GMT is 09:05 on Friday, February 14, 2014

  Current weather conditions in Vancouver

  Cloudy43 ° F / 6 ° C

• I can not connect on windows vista home basic desktop pc because of the former owner

  I can't log on to Windows vista home basic desktop pc because of the password previous owners is unknown

  Hello

  Try the following.

  Using another PC, download the app from the following link and save it in your downloads folder.

  PC login now

  Once the download is complete, open your download folder and double-click on the installer - this will result in another file, which is the disk image (.) ISO) you need to burn to a blank CD.

  Now, you will need to use an app like ImgBurn to burn the ISO correctly on a blank CD - a guide on the use of ImgBurn to write that an ISO on a disc is here.

  When the disk has been created, shut down the PC you can not log on, press the ESC key as soon as you press the power button to access the Start Menu, insert the CD, select Boot Options (usually f9), use the arrow keys to select the CD/DVD drive and press enter - peut also have you to "Press any key" to boot from the CD if asked to.

  Follow the instructions on the guide here to remove the current password.

  Kind regards

  DP - K

• MIC not working not not with Vista Home Basic

  Since I installed Vista Home Basic microphone does not work. It worked perfectly with Windows 98 earlier. The speakers are OK. The microphone is connected is not detected by the system. Vista has been updated with the Service Pack SP1. The sound card is integrated into the motherboard (Intel G945GCL). The sound material is described in as "High definition Audio Device" Device Manager. I checked that the drivers installed are later.

  Can someone please help me to operate the microphone?

  Hi Dorchit,

  Thanks for posting your question on the Forums of Windows Vista.

  Here are some things you can try to solve this problem.

  How to resolve problems that you experience after you install a Service Pack for Windows Vista
  http://support.Microsoft.com/kb/948481

  What you need to know before you install Service Pack 1
  http://support.Microsoft.com/kb/936330

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Hope the information will help. Please post back and we do know.

  Thank you & best regards

  Ashish Gupta

  Microsoft Answers Support Engineer

• Online backup service for my Vista Home Basic

  I tried to do a full backup of my Vista Home Basic OS. By following the instructions on the Web help and Support site, I used a total of 12 CD to do a full backup.  It took a such incredible amount of time and money and I still don't know what the correct procedure. I've seen many services online that offer to do the same thing for a minimal amount. And the files would be available at any time and any PC. I don't know what to do. Pay your bills online. I downloaded a lot of music and family photos. Can someone please advise me on how best to safeguard my information simply and safely? I don't mind paying the monthly or annual fees as long as it is considered to be safe.

  Thanks in advance for any help you can provide.

  Sincerely,

  Linda

  Hello

  The best value for money option is to save a number of different external hard drives and store them off-site (perhaps in different places).

  Each online backup provider has different rates depending on how you want to store and their prices change over time. To learn more, you may need to search online using your favorite search engine.

  DISCLAIMER of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Can I install XP on my laptop dell inspiron 1501 though came with Vista Home Basic?

  I have a computer laptop inspiron 1501 and it came with Vista Home Basic.  I like better XP and wondering if I have an installation on my computer, I have an XP installation disc.  If I can, how to do it all?

  Hello

  You will be able to install Windows Xp on your computer, but you will need to perform a clean installation.

  Before installing Windows XP. And also, you will have to take up the data in your computer, because the new facility will remove all data into the computer.

  Download the driver from the support of dell at the following link:

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&CS=19&l=en&s=DHS&OS=WW1&OSL=en&CATID=&impid=&SystemID=INS_PNT_1501

  I would also like to inform you that there is now the operating system disks or support is available for Windows XP.

  For reference, see the following Microsoft.

  How to back up or transfer your data on a Windows computer:

  http://support.Microsoft.com/kb/971759

  How to install Windows XP: http://support.microsoft.com/kb/978307

  Hope the information is useful.

• Unable to start the center of security on windows Vista Home Basic

  I have windows Vista Home Basic and I can't get the Security Center to start. I get messages saying that I have worms and trojans in my system, but my AVG antivirus found nothing after a complete analysis of the system. These threats don't exist and how do I get the Security Center to start?

  Hello

  AVG can't find everything

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Vista Home Basic K (orea) English

  Hello

  For the work proposed; my main company (in Korea) equipted me with a laptop COMPAQ with Vista Home Basic K, with a Korean display (menu, bars...).

  Sciense I don't know Korean: How can I change the language to English, even I couldn't find the option (to change the display language) on the keyboards and languages tab.

  Thanks in advance

  You can not upgrade to Business edition, and in any case you would need a copy of the company not not a copy of the company.  To upgrade to Windows Vista Ultimate Edition, buy a package of upgrade and install it.

  "dajon76" wrote in the new message: * e-mail address is removed from the privacy... *

  Dear Sir

  Thank you for your help and officials answer.

  May I ask how to upgrade my vista home basic ultimate or Business edition?

  Thank you once again

• Win Vista Home Basic product key is not valid

  I bought Vista Home Basic a wile ago. Now I've updated it. I want to reformat my PC, so I insert the DVD of Vista, and when I enter my product key I get the message "the key is incorrect. How can I fix it, I need to remove the updates or something?

  Hi cheater39,

  If you reinstall Vista you will have to update any new. If the operating system works very well, so it is useless to re - install in order to re - install. Once, re - install if you have multiple problems that can easily be corrected, and then reinstall is a "last" resort option

  You say you bought Vista Home Basic. I suppose, therefore, that you went into a store and bought a full retail copy? If so, the product key number is on the case. If you bought it from another source, for example, Internet, ebay etc (except direct from Microsoft) then you know that it's a genuine product key and not a copy hacked?

  It is in fact a copy of 'upgrade '? If so you need to install your "old" operating system first, for example, Windows XP and upgrade then.

  Check and recheck the code product key that you insert. If it continues to say the key is not valid, resume the DVD in the store that you bought it and ask them to check it for you. You can also contact the Microsoft Customer service in your own country - you should find one address number and/or e-mail on the Microsoft Web site.

  You can actually install Vista without product key by simply letting the dialog box empty product key and then pressing the next button. A message will appear in which you must press the No button. A list of the versions of Vista should then appear. Select the version that you have, for example, Vista Home Basic, press Next, then it should install. No you get away without putting the product key in. Although Windows Vista has been installed it works for a while, but it would give you time, we hope, sort out the product key number. After that the time scheduled (30 days I think) you will need to enter the correct product key otherwise Vista will simply stop working. This option is not ideal, but it will give you as small period of "grace." If you cannot sort the product key on or, heaven forbid, you ended up buying a pirated copy, you will have no real alternative but to buy another legitimate copy.

  I suggest you use my last suggestion as a "last resort" option Try to install on another machine to see if the product key works, or taking it back to the shop and ask them why it won't install.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com