Are not allowed to run a few commands on ESXi
I see the permission denied error when I try to run
stop to spend
stopping VMware-fdm
Please let me how can know I run these commands in vmware HOL
Hello
You don't mention which laboratory you take. This would help.
I tried the commands in HOL-SDC-1402 (Distributed Switch) and HOL-SDC-1410, which is new vSphere 6.
In both cases, it worked for me. I opened a PuTTy session as root with password VMware1!
I used esx - 01 a .corp .local.
stop /etc/init.d/hostd #.
# /etc/init.d/hostd start
After the configuration of the cluster for vSphere HA.
stop /etc/init.d/vmware-fdm #.
# /etc/init.d/vmware-fdm start
In HOL-SDC-1410, I needed path to the script directly because the symbolic link did not work from the command line:
# /etc/opt/init.d/vmware-fdm restart
See you soon!
Bill
Tags: VMware
Similar Questions
-
\\XXXDesktop\SharedDocs is not accessible. You are not allowed to use this network resource. Contact the administrator of this server to find out if you have the permission to access. Not enough server storage is available to process this command.
I got the above message when I tried to access my room servert pc (XP Pro with Service Pack 3) from another pc Client (XP Home Edition with service pack 3) on a network share. I see all class document & readers who share in my network places on both PCs.
There is no problem when I have access to XP Home Edition of XP Pro. I heard the pc installed with Acronis True Image to give to this question. But my two PCs are installed with it. Any solution.
What I've tried so far on my pc (XP Pro):
1. click on start, run, type regedit, and then click OK.
2. Locate and double-click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
3. on the right side, double-click restrictanonymous setting.
4. make sure that that the value in the value data box is set to 0, and then click OK_ (why the default value is 0. I change it to 1, but always the same)
5. close the registry editor.
6. restart the computer.
I also tried to enable the allow anonymous enumeration of SAM accounts and shares on XP Pro (default value is Disable).
File and printer sharing exception is enabled in firewall. Don't have a firewall part 3The two guest account are capable of Simple file sharing in XP Pro box checked also checked.
Hello
Please visit the following link.
-
"Error: not allowed to run the local process" during the execution of a WF in vRO7.0
Hi all
Need your help. We encountered a problem - "not allowed to run the local process", during the execution of a WF in vRO7.0.
In this WF, they attempt to run the script class vRO 7.0 Server 'command. By default the Orchestrator applications having not allowed to run the command class, we get allowed by a mistake.
To resolve this issue we need to set the system property ‘com.vmware.js.allow-local-process=true’ to the ‘vmo.properties’ properties file of the vRO 7.0 Orchestrator server.
We already have the property to true for the properties file under ' / etc/vco/app-server " folder and after Orchestrator services are restarted. But still, we get the question.
Another thing is that we use vRO cluster machines, so we put the real in both files to vmo.properties on both servers.
Can you help me please how to fix?
We have followed the link below.
Thank you
Miloud
Thanks llian, complete reboot of the devices/machines vRO made the resolution.
Now everything works fine.
Thank you
Miloud
-
Why this message: you are not allowed to view or update this topic
Why this message: you are not allowed to publish or comment on it.
It's a legitimate question.
You encounter a bug in the Jive Software that runs this forum. Most of the time simply try again or refresh the page will fix the problem. There is one caveat with respect to time. You can't post more than once every 30 seconds, and it's to discourage spamming.
-
original title WAV file: windows media player
Multimedia player that allows some of my WAV files to be played in a more quick read but other WAV files are NOT allowed to read at a faster speed. Any suggestions on how to fix?
Thank you
Hello
1 did you change on your computer before this problem?
2. what happens when you try to play?
3. what operating system is running on your computer?What version of the operating system Windows am I running?
http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running
Follow the suggestions and see if it helps.Method 1
You can run Windows Media Player settings convenience store.
Open the troubleshooting Windows Media Player settings Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-TroubleshooterMethod 2
You can read the article and then check.
Change playback speed in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows7/change-playback-speed-in-Windows-Media-PlayerSee also:
Play an audio or video file: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/play-an-audio-or-video-file-frequently-asked-questions
Play an audio or video file
http://Windows.Microsoft.com/en-us/Windows7/play-an-audio-or-video-file -
XP Pro, SP3. I downloaded the free Bullzip pdf printer. Somehow my old printer pdf in my printer disappeared list which I have used for years. I get this message when installing - "you are not allowed to change the settings for this printer. If you need to change the settings, contact your system administrator. I click ok and it ends, but it doesn't work. It does not appear in the printer control panel as a printer to change anything.
I built this computer at home and I'm the only one using it. What is this function 'administrator '? I've never had to administrator on any program. Never. That is what it is?
CNET is infamous for the grouping of things in its downloads as much a / v programs report as junk (I went through the same thing using eSet NOD32 has / v). I seem to remember that if you ignore the warning and download the exe file and then use a tool like the free 7-zip to extract only the file necessary to run the program you want, you can work around the problem.
For a pdf printer free which is not CNET - and works well - go here--> http://www.cutepdf.com/products/cutepdf/writer.asp
EDIT TO ADD A LINK:
See, for example, http://forums.cnet.com/7723-12543_102-582307/safe-downloads-cnet-com-sorry-but-not-anymore/
-
Windows cannot \\RIPSERVERaccrss. You are not allowed to access\\RIPSERVER... I can see the\\RIPSERVER on my network but cannot connect. I'm running with 3 computers XP Pro windows SBS 2003 domain and a Windows 2000 (\\RIPSERVER) runs a computer to plate system that I use every day. I just added a new computer Windows 7 Professional and can see everything on the network (domain), I can access the server drives (where we keep the file sbs 2003), but when I click on the\\RIPSERVER I get error (cannot access...) If I do the same with any of the XP computers that he connects very well. Please help as I cannot connect I have to make my new computer an XP and I wanted to start to learn the Windows 7 operating system. Please let me know if you need more information on my systems.
Thanks in advance for your help.
Hi RC383,
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet forum.
Link, please refer to:http://social.technet.microsoft.com/Forums/en/itproxpsp/threads
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Hi all
When I tried to use the Device.device.OS to get the string from the bone. It is compiled smoothly. But it throws error when the application started on my desk.
Error #1079: Native methods are not allowed in the loaded code.
It does not error in the emulator, but he did not get the chain of the OS.
Someone knows how to use the device class? Is it still not currently supported?
Thank you very much!
Error #1079: Native methods are not allowed in the loaded code.
This error is thrown on the desktop because your qnx - air.swc is probably in the process of fusion as code instead of being tied to your project as external. The reason who need to be external is that it contains classes that exist in the execution of AIR in the Simulator and not in the AIR runtime on your desktop. The device classes use the custom air extensions we wrote to get the properties of the device.
If you want just the operating system, you can also use the Capabilities.os, which is a standard API Flash Player and does not require the use of custom extensions.
My guess on why it does not work on the device thus is that the qnx - air.swc is not defined externally. Return to externally set and run it in the Simulator.
Hope that helps
Julian
-
Hello
I have recently reinstalled the RC of windows 7 to windows 7 after its release, since the reader that I use to store most of my data etc won't let me download files to a folder on the disc, I get the message "are not allowed to save in this location, you want to save in the"Chocolate"instead... I have administrator rights and set permissions on all the folders for. me, I have watched many forums microsoft no, only to discover that I tried all the suggestions here :/Hello Marilyn,.
Sorry its taken if for a long time to get back to you, I almost forgot this thread, I found a 'solution', which means I just download the files every time windows I would and re - arrange them later... but I would rather sort... so to answer your questions...I'm developer/technician... and just on main computer, I always do a fresh install, then Yes, it was a clean install, I formatted the drive as the windows RC version 7 is installed and on the new Windos 7 instead.
The user account is the one that I created during installation... 'Chocolate' and has rights admin etc...
I have not tried to create a new administrator... but I don't think that's the question that I had some success with the player and did all my shortcuts 'user' (documents pictures videos music etc.) in folders on the same drive, well, the folder that I use for downloading and another which I use to store/organize applications install files or utilities etc doesn't let me download for them. I can copy do them things, create new files and folders, etc, but all this "permission administrator" needs to give in this case I just click ok...The clean boot is an idea... but what will really prove something that runs at windows startup is the cause? So what that it either from 60 to 100 processes running at the same time, that it sounds pretty useless in my opinion, so research will start for whoever it is :/
I thought just disable UAC all together, which could shed light on the issue... I don't mind given this security feature, I usually know what im doing and have a good knowledge of what should and shouldn't tbe running etc, often even catch the virus before my antivirus... Speaking of which, this problem occurred before that I have nothing installed on the machine, it is trying to download the latest drivers after the new installation that I first noticed the problem...
The only other thing I can think is, perhaps, when I set the permissions and or possession of the car it does not define correctly and windows always "think" I don't have permission?:
Look forward to your thoughts
THX
Chocolate
-
You are not allowed to access this file? A strange problem!
While lately I got this problem where some file I download, I don't have the permission to access, which is quite strange for some reason.
Normally when I download something I automatically be allowed to do whatever with the download file (that is, move files, open, delete, etc.). However, my computer was disable this method and not allowing any user to do something with it. He said something like "this file cannot be accessed, please see the bulletin under administrator" or something of the sort. I managed to solve the problem manually by accessing the properties and in the Security tab, add "Kamchinn(Admin User)" to the Group and enable it, and it works. My question? Is to ensure that it automatically makes me admin anyway? It is quite difficult to explain but...
Basically all the files I download now (be it a text file, music, word, etc.), on the Security Properties tab, there is nothing there. Normally it is supposed to be the user on this, where Kamchinn (Admin user) but because there is no, I myself add manually to the file in order for use, otherwise I can't do anything with it. Anyone know the possible causes for this? Thanks in advance!Your PC may be infected with the new variant of Sirefef AKA Zero access is. One of the problems is that the downloads are identified (wrongly) as a virus, or a message indicating that you are not allowed access to files, downloads are missing and/or it can disable and prevent installation of various anti-malware programs.
http://www.Microsoft.com/security/portal/threat/encyclopedia/entry.aspx?name=Win32%2FSirefef
Suggest you use HitmanPro Kickstart, which should remove this malware and fix changes made to the computer by the malware: http://www.surfright.nl/en/kickstart , you must use an uninfected computer to download it to a flash drive and then follow the specific directions on how to run the program on the infected computer. Hitman Pro Kickstart is available as a 30 day trial version.
For more information, see http://dl.surfright.nl/Kickstart-FAQ.pdf and http://dl.surfright.nl/Kickstart-User-Manual.pdf
Good luck... If this does not apply to your question suggests the validation of back with more details.
http://ask-Leo.com/why_dont_antimalware_tools_work_better.html
-
You are not authorized to run this application. Contact your administrator.
Hi, my new users cannot log into Primavera. They get an error like "You are not authorized to run this application. Contact your administrator. ».
Hello
You must allow access to professional Module P6.
According to Primavera P6 version you are using, the configuration is different:
If you use P6 EPPM: Admin (or management) > user access > access to the Module > check P6 Professional
Is using P6 PPM: Admin > users > access to the Module > check P6 Professional
Kind regards.
-
You are not allowed to open the form ORA-01403: no data found
Hello
I created a new forms of Oracle 10 g. It compiles successfully, but when it is open, it gives an error message: you are not allowed to open the form ORA-01403: no data found.
I am already connected to the database. Please can someone help what is the reason of this problem, and no matter what possible resolution?
Looks like you have some kind of security is enabled. However, because you do not share details about your environment or what you're doing here is not that we can do is guess.
- Exactly what version of forms do you use?
- Exactly which version of the database that you are using?
- You use something like Oracle E-Business (e.g. template.fmb)?
- You created the form with Oracle Designer?
- If you create a simple form using only the layout assistants and the DataBlock compared to schema Oracle demo (SCOTT), this form run?
No additional details describing what you do or have done could be useful.
-
Comments operations are not allowed for anonymous users on this virtual machine
Hello
After a lot of trying, I finally managed to connect to a virtual machine in VMware Server 2.0.2
However, I get the error "comments operations are not allowed for anonymous users on this virtual computer" when I try to run notepad.exe. I think that some permissions must be set. So I put comments and guests of user group to be able to administer the object (VM); but still this error comes.
Can someone help me pls with getting beyond this error.
Thank you very much.
This has come up before on this Forum. Be default, Windows does not allow for remote log-ins for accounts without password, which prevents the VIX to perform log-ins comments in this situation.
You can follow the steps described in the following thread to enable remote log-ins for accounts without password or change the account to have a password.
-
ORA-01723: columns of length zero are not allowed
Hello
I try to combine the 2 tables (one of the tables as a single column and the other has 2 columns)... Here's the query that I'm running
create the table temp_combine
as
SELECT the CITY, NULL AS TABLE_A Prov.
Union of all the
SELECT CITY, Prov. OF TABLE_B
Here is the error message I got:
ORA-01723: columns of length zero are not allowed
Please advice, how to solve this problemHow do I solve this problem
Or reverse the order of the union of all the
SELECT CITY, Prov FROM TABLE_B union all SELECT CITY, NULL AS Prov FROM TABLE_A
or a cast of NULL for the Prov. data type (for example assuming that it is varchar2 (10)):
SELECT CITY, CAST(NULL AS VARCHAR2(10)) AS Prov FROM TABLE_A union all SELECT CITY, Prov FROM TABLE_B
-
You are not allowed to create or update this content
I am trying to create a new post, but when I click on 'Post' I get the error message "you are not allowed to create or update this content.
Is this a bug or is it user error?
Try again in a little, it's a known bug. Also try to refresh the page or signing in.
Maybe you are looking for
-
Cannot add much more to the issue. Can't the part of edition of the program. I reloaded the program, no change. This program has been flawless so far. I did no change this month. Now, all of a sudden, my Firefox toolbar disappeared and don't see when
-
Cannot remove the hard drive from the case
Acer Aspire AT3-605-UR22 with the slide in front of the Bay of hard drive enclosure. I have a second hard drive in the traction of front loading Bay. For the life of me I can't figure out how to remove the hd enclosure! OMG -Shawn
-
Clean the PC files and delete files.
I'm trying to clean up the House. I have a number of things on my hard drive that I don't know if I need it or not. They show as follows: For 2007 Office System Compatibility Pack Update of security for MS office 2007 sys: 972581 10/19/2009 KB969618
-
TouchSmart 11-e030sa Pavilion: Pavilion TouchSmart e030sa 11 - Unstable screen etc.
My 18 month old machine has developed a very irritating flaw which causes the touch screen to lock up with circles appearing and down at the edge of the left hand. They seem to cause instructions to the machine at random to open and close any program
-
VLANning questions about blades MXL
Hello I have a new M100e with a SAN PS4110xs case, a few servers blade and two switches Force10 MXL (switches and SAN on fabric) I put it all in place and works fine, but using the default VLAN for all I want to connect the switches to a Juniper EX33