TouchSmart 11-e030sa Pavilion: Pavilion TouchSmart e030sa 11 - Unstable screen etc.

Similar Questions

• HP Pavilion 17-e117dx NO TOUCH SCREEN

  HP Pavilion e117dx 17, NOT the SCREEN TOUCH...

  Hi people... I have a question for my 17 news of HP Pavillion-e117dx, which is a NO TOUCH SCREEN. I can't find what it listed on the site of HP. So the specs are the same as the model of 17-e117dx Touch screen HP Pavilion. Also can I have the RAM (sharp) updated without voiding the warranty.  I found little ram on the site crutial for my HP model. How much is allowed for this laptop. Theres 4 concerts in what are now 8 gigs the limit for Windows 8.1. Thanks for your help.

  Hello:

  While I do not work for HP, I would say that the specs are the same.

  http://support.HP.com/us-en/document/c04261840

  The maintenance manual (Chapter 5) indicates that you can install it yourself the memory.

  http://h10032.www1.HP.com/CTG/manual/c04069163.PDF

  This means that you do not cancel the guarantee that if you break something trying to install memory.

  You will find all the info you need in Chapter 1 of memory regarding service upgrade info manual.

• I have a hp pavilion dv9205us laptop - Alt print screen does not work

  I have a hp pavilion dv9205us laptop - Alt Print screen (single screen) does not work - operating sys is Vista but XP Professional is my Microsoft application - I can Alt scree printing when I have a keyboard plugged in. - but without the HP laptop has only Prt sc (which is the option further down on the personal key) - without the remote keyboard how can you alt info impression of individual office to another doc. ???

  Thank you very much - it worked, and then just to screen individual, you want to without the entire background behind it - Alt / button FN and Prt Sc then allows me to get that. Once again thank you.

• HP pavilion g6-1016ex the computer screen does not.

  HP pavilion g6-1016ex the computer screen does not. but when I connect to the pc display by display moniter on-site port, pc display moniter works. How can recover from this problem... ?

  Have you tried pressing F4 or Fn + F4 to switch between the views?

  If it still does not work, the following document can help you identify the problem: display problems.

• New Hp pavilion touchsmart shows a black screen after login

  I just bought a new Hp pavilion computer printer portable all-in-one laptop / tablet that runs windows 8. It worked perfectly well until now.

  The laptop starts fine, the hp displayed logo and the login screen is displayed. After that I entered the password, it begins to load but then becomes just a black screen. My cursor is visible, but nothing else happens.

  I restarted the laptop several times. Help, please. Thank you.

  Hi all

  Please use F11, press it all right after the startup of the device. Press several times to ensure that you access the Recovery Manager.

  Then, when you're there, select the language in the first screen and then "troubleshooting." Then select advanced options. In this menu, select System Restore, to restore your system to a date before the show began.

  In case you have no restore points, in the section "Troubleshooting" menu, select "System Refresh", it reinstalls the system without erasing your data.

  In which case you can start in safe mode, try to search for a program called "SearchProtect" and if you find it, try to uninstall it.

  Let me know the results of the above suggestions.

  Thank you

• TouchSmart 610: My Touchsmart OSD Error Message screen

  I get the following error message:

  TouchSmart HP My Display OSD has stopped working.

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  No solution was ever provided. Can someone tell me why this is happening and how can I stop it?

  Thank you

  Hi there @ArnieBa,

  That the Forums are with you!  I understand that the HP My Display software no longer works for you.  I'm happy to help you with this.

  Check some models of the 610, I found that for those I have looked at there are the drivers and utilities for Windows 7 and 8, but not for Windows 10.  Please report the full product for your computer number, so I can check for your specific model. Check out the following, if you need assistance with this information.  HP desktop PC - how can I find my model number, serial number or product?

  Assuming that your model does not have specific Windows 10 drivers, then you can always try reload the driver or the software of my display, such as an update of Windows 10 maybe breaking the application.  Another choice would be to try to use the system restore to load a previous group of system settings from an era where the application worked in Windows 10, assuming you have an available for use valid restore point.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP Touchsmart 310 1100 HP Screen-No Black logo or whatever it is-just a black screen

  Hi-

  I have a HP Touchsmart 310 1100 which when I turn there is only a black screen and I can hear the fans running. No HP logo or guest to enter the bios, just a completely black screen.

  I tried:

  (1) HP suggested resetting the default bios (http://support.hp.com/us-en/document/c02217843) settings by pressing f10, f5 etc.

  (2) remove the hard drive, reinstalling memory, unplug all usb accessories

  (3) used another power supply from an another 310 HP

  (4) change the jumper on the motherboard from 1-2 to 7-8 and back to 1-2 to clear the cmos memory

  I'm about to remove the cooling fan and the unit and re-insert the processor, but I wonder if there is something to try before that.

  I'm starting to think it's a bad mother, gpu, or display the power inverter.

  It is out of warranty, so if anyone has any advice I would be happy.

  This seems to be a problem that has been listed in a dozen other posts without real solution given.

  I solved my problem with my 310 - it was the CPU. Replaced with the same model cpu AMD bought on Amazon.

  Works fine now.

  There is no video card to replace on my model 310. There is a video chip that is soldered to the motherboard.

• TouchSmart 610-1130jp: TouchSmart does not (white screen)

  My TouchSmart 610 will be 8fois beeps after I pressed the power button. And it doesn't show anything, as in the black screen.

  But the power is still and the fan is functunally normal.and all other materials are also functionally normal.

  I tried to remove the graphics card, but its still the same beeps (8fois together with the ledlight). And also I tried to

  change the CPU at a new you always change anything, the same problem. When I check the FRIEND bios beep codes, the

  8beeps, this means that the video memory. I don't know what video memory, it is indicated (if grphics card or the)

  main video memory) if it meant the main video memory, how can I change the video memory if she tied with

  the motherboard? What will I do with this problem? Can you please if someone has encountered this problem

  shared for me to know how to solve?

  Hello David Edward,.

  Your system originally came with Windows 7?

  Have you tried reseating the RAM stick? Sometimes, that's all it takes.

  I got a stick go bad causing a system to have the exact symptoms you describe.

  The system will use the built-in memory RAM. If the RAM is bad, it can cause the effect of black screen.

  You can also run a diagnostic memory via the bios here test...

  HP Notebook PC - detection of hardware failures (Windows 7, Vista)

  You can also run a memtest from a USB or DVD.

  MemTest86 - Official Site of the x 86 memory test tool

  Ideal would be to have another stick of ram to replace with to test.

• HP Pavilion dm1 Notebook pc: black screen

  My screen goes black when I start windows 7 on my laptop of Dm1 Hp Paviliom. Also, I have connected my pc to an external monitor via VGA cable, and then I can see the windows operating system in the external monitor. I did a test to start and then I got these results:
  Memory test: past

  Smart check: past
  Dst short: past
  Optimized DST: Software error
  Battery test: primary past secondary - has NOT been

  PCI device control: past.
  -----------------------------------------------------------------------
  Starting test: past
  
  Does anyone have an idea of this behavior? How can I solve this problem

  Hi @ljuserhpfor ,

  Thank you for visiting the Forums HP's Support and welcome. I appreciate all the information and the results of the tests that you did. I looked in your question about your HP Pavilion dm1-3025dx Entertainment Notebook PC and the laptop does not start. In my view, that the question is called the RTC battery. (Real TIme Clock).  Here isa document to show you how you can replace that.

  If you see things very well on a screen, it might be a bad driver has been installed. You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

  When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.

  Hope it will be useful.

  Thank you.

• Pavilion g6-2320TX: computer laptop screen blank after login

  Hi all

  I have a HP pavilion 2320TX g6 and it runs on windows 8.1(64 bit) with no problems until recently.

  It was originally windows 8 and I've updated to WIN8.1 back.i 6 months have not experienced any problems.

  I don't know what happened but when I opened my laptop after the login screen, he gave me a black screen with the mouse cursor.

  I tried closing force to remove the battery and the connection but no use.

  The last time I opened (i.e. before I met this problem), I installed 2 applications KMPlayer and secure360.

  I uninstalled them both by the secure and tried boot option, but it didn't work.

  I can't even find the reason why this problem so please help me out by giving solutions for this.

  Thank you

  Concerning

  Florine

  Hello

  Try this and let me know.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  At the bottom left, select details (if it is not already selected).

  Click in the header of column Nsoul to organize the processes in alphabetical order.

  Look for an entry called to run once Wrapper (RunOnce.exe) - If you see it listed, right-click on it and select end task.

  The office is now show?

  If this is the case, download Autoruns on the following link and save it in your downloads folder.

  http://download.sysinternals.com/files/Autoruns.zip

  When you have that, open your download folder, right-click on the folder zipped to Autoruns, select "extract all...". "and in the next window, click Extract.

  A new window will open displaying the extracted content.  The application you must launch is the 2nd in the list (in format autoruns 636ko) but this by right clicking on it and selecting 'Run as administrator' -click 'Yes' to the uac prompt.

  Scroll down the list until you find the entrance to RunOnce (it may well be 2 entries) and Remove the tick (s) in the box next to it.

  Restart computer and see if it boots now on the desktop.

  Best regards

  DP - K

• Pavilion dv6: how to unlock screen after hitting f4

  hP Pavilion, while that in excel tried to use f4, now the screen is locked off the coast. How to unlock it please.

  Hello

  Try the following.

  Press the f4 key once.

  Press the arrow down.

  Press the Enter key.

  Kind regards

  DP - K

• HP Pavilion HPE h8 - 1213c: black screen of death because of the new graphics card (EVGA geforce gtx 960)

  I just bought a new card (EVGA geforce gtx 960) to kick some butt. But during installation, it seems to be held on a black screen of death? Not the most fun to see... in any case, I had asked the store clerk if it would work and he said to, but it doesn't seem like it does... Is there a new BIOS I should download or something? Any help would be nice...:.

  My computer is a HP Pavilion HPE h8 - 1213c

  The graphics card is an EVGA geforce gtx 960

  If you have both. You can use one or. PIN 8 can be used as a 6 pin as well.

  http://www.EVGA.com/products/ProductList.aspx?type=0 & Family = GeForce + 900 + Series + Family & Chipset = GTX + 960

  2 smaller cards use a single PIN 6. The rest use a single 8 pin.

• HP pavilion followed bsod to black screen and the start program menu f10 does not work

  Hello

  Come play a game on my pc when a BSOD pops up... then in a few seconds my pc stops and starts again. But now I'm stuck in a black screen: a disk error occurred press ctrl alt del to restart. When I do, I'm back to the blue screen (the screen where you can choose to go to recovery, configuration and startup menu). The f10 key recovery does not, others do it... What can I do? Im not happy to lose all my documents but if not the end of the world because I have an external drive with the most important things about it. I don't have a recovery cd... I hope someone can help me because I can't find answers on the internet...

  I can't find the type of pc but its old I guess from a pavilion of 87... cannot seek in the pc for the exact number.

  Thank you!

  I bought a new PC...

• Pavilion 15-p053np: Wi - Fi, screen LCD FHD upgrade and second HARD drive

  Hello

  I have a 15-p053np Pavilion and a card Wi-fi/bt RTL8723BE 1 x 1, I want to replace it with a better card, but I can't find a service manual.

  also, I see a model like mine, but with a Full HD screen and want to know if it is also compatible.

  I replaced internal 500 gb HDD with a SSD 120 GB and I do not use the dvd player, if I buy an internal basket and replace it with the 500 GB hard drive, it's going to work?

  Hello:

  Here is the link to the page of user guides for your laptop model series, which includes the maintenance manual.

  http://support.HP.com/us-en/product/HP-Pavilion-15-P000-notebook-PC-series/6936226/model/7174371/manuals

  As your model has an AMD processor and chipset, you cannot replace the existing wireless card with a processor Intel, one.

  There are too many cards Intel does not not on models with AMD hardware.

  My recommendation, if you want a card dual band N Wireless with bluetooth, would be to get the Broadcom BCM943228HMB 802.11abgn 2 × 2 adapter Wi - Fi, Broadcom Bluetooth4.0 adapter - part # 730668-001 HP

  You can get the generic card cheaper on Amazon than recovering from HP.

  I can't answer your other questions.

• HP Pavilion x 360 n014na: HP Pavilion x 360 n014na touch screen not working not not after installing Windows 8.1

  Please help, I'm desperate.  I searched for weeks without any solution.  I have a HP Pavilion x 360 n014na, when I bought it I installed Linux immediately and have been using it this way without problem.

  However, I decided that I wanted to go back to 8.1 for Windows as the main operating system.  I was not able to make a USB recovery in time when I bought the laptop, so I used a legal copy obtained directly from Microsoft.  It has detected my BIOS on the product key and activated correctly, all devices work.   Except the touchscreen unresponsive.

  I went to the support page for my machine model, downloaded and updated all the drivers.  There is NO drivers for the touch screen.  I contacted Microsoft, the drivers are provided by HP and they have not.

  I have seen that others complain and no resolution, just a pointer to a page for Windows 8 (not 8.1) with outdated information.  It is NOT a hardware problem.  It IS a driver problem, IE. There is no driver available anywhere.  I am not a novice, I have worked with computers professionally for decades.

  Need help please, I just need a link to the driver, not a page with obsolete or non-applicable information.

  No, no.  Having to purchase replacement media is not a solution.  I said I got a legal copy of the Microsoft Windows Installer, I have a product key integrated in the BIOS.  I won't spend more money for something that I own.

  As it is a common complaint, here's what I did:

  The solution was to check the HP drivers for I2C and GPIO are present and loaded correctly, he will be seen in the device under "Human Interface devices" Manager  They appear originally HID-compliant touch screen driver, get these right and the touchscreen should work after a reboot.  I had to install both times that something must have gone wrong the first time.