Are possible redirects for specific products?

Similar Questions

• Send a personalized notification of purchase for specific products?

  Hello

  We have a customer who uses Vervante for shipping some of their clothes.  In order to make the automatic order process, we need to have a confirmation email sent to Vervante that contains order information in a specific format.  Is it possible to do it for specific products or in a catalog?

  Thank you

  Jeff

  Oh I may have found a solution.  I didn't know that you can configure Drop Shipping.

• Workflow for specific products/catalogues

  Hi people. I use BC to a customer for over a year now. Online store has been produced all downloadable, so it worked pretty much on autopilot and all customers had to worry about was it supply new content on a regular basis, which was the issue of the use of BC. Problem is the client now wants to introduce one or two products that need to be delivered physically and she must be organized manually.

  My plan was to implement a workflow that automatically sends the customer whenever one of these products is bought. The problem is, I can't seem to find a way to attach a workflow to a specific product in the catalogue. The only option seems to be to set up a workflow for all orders, which means that the customer receives hundreds of emails about download purchases that she didn't need. Of course, you then run the risk of missing a manual delivery e-mail in among others. Clearly I'm missing something obvious (again). Can someone help me?

  In short, how can I get a notification if someone buys A product, but not if they buy products B, C, D, E...?

  Oh man that is rude. I really don't think there is a way to manage the workflow based on a catalogue/product in particular.

  However what we can do is set up your customer in the CRM, and then use drop shipping to warn when a physical product is purchased.

  inside, it is a notice of workflow, just a little less dynamic.

  Catalyst for help | Implement a drop shipping

• What specific products are part of the complete abo for cs5-client, which will be the price after one year and will be the rice price information early enough to cancel the contract? Best regards Jürgen

  What specific products are part of the complete abo for cs5-client, which will be the price after one year and will be the rice price information early enough to cancel the contract? Best regards Jürgen

  For details please see the link below:

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

  Otherwise, you can reach the Adobe sales as well.

• Using {module_data}: is it possible to get all the customers who are subscribers to 2 specific secure areas

  Using {module_data}: is it possible to get all the customers who are subscribers to 2 specific secure areas?

  That is to say: the list of all customers who subscribe to the secure area 51 and 6387 id.

  I am trying the configuration that you can see in the link below but is not working - I think that each customer is listed separately for each secure area, rather than listing a single customer and subscribed them to safe areas.

  2015-10-02_16-01 - 54.png - Google Drive

  I want to all clients in the CRM that match the criteria, not just check if the user matches the list.

  I can get it working for a secure or using GOLD, but the operator AND does not work in this case.

  Any thoughts?

  Do I have to run two separate (one for each secure area) calls, then compare the two somehow? Keeping in mind the 500 limit because it will look at the whole CRM.

  Hi Adam,.

  and do not work, as the system is testing to see if there is an object with two identity documents at the same time.

  What you can do, is useas follows:

  {module_data resource = "zonecustomers" version = "v3" fields = "customerId, IDZone" skip "0" limit = "100" = where = "\ {"IDZone": \ {"$dans": \ [51, 6387\] \} \}" order = 'zone ID' collection = "twoSZ" "}

  Yes, this will get duplicated in the result. Simply add the ID to a string, split to table and sort. Just made this to get unique products of 2 catalogs converted for your use case.

  EDIT (added a quick feature to find all of your customers)

  {module_data resource = "zonecustomers" version = "v3" fields = "customerId" skip = '0' limit = '1' where = "\ {"IDZone": \ {"$dans": \ [6524, 6664\] \} \}" order = 'zone ID' collection = 'howMany' "}

  {assign % max = howMany.totalItemsCount-%}

  Total customers: {{max}}
  

  {% assign limit = 500 - percent}

  {% assign moduloCheck = max: modulo: limit %}}

  {% If moduloCheck == 0 %}

  {% assign totalPages = max | divided_by: limit %}}

  {% other %}

  {% assign totalPages = max | divided_by: limit: more: 1 %}}

  {% endif %}

  Total pages: {{totalPages}}
  

  {% assign string = ' '-%}

  {% for i % (0.totalPages)}

  {module_data resource = "zonecustomers" version = "v3" fields = "customerId" skip = "{{limit |}}"} "{{time: I}}" limit = "{{limit}}" where = "------{'IDZone':------{'$dans':------[6524, 6664\]------}-}" order = 'zone ID' collection = "twoSZ"} "

  {% for article on twoSZ.items-%}

  {capture string %} {{item.customerId}},{{string}}{% endcapture-%}

  {% endfor}

  {% endfor}

  {% assign array string = | split: ',' |} Tri-%}

  {% assign UniqueId = ""-%}

  ID sorted

  {{ array | json }}

  {% assign index = 0-%}

  {% for a table-%}

  {% If index ==-%}

  {capture UniqueId %} {{a}}, {{uniqueIds}} {endcapture %}

  {endif %}

  {% index assign = a %-}

  {% endfor}

  Your customers

  {{ uniqueIds | split: "," | sort | json }}

  I had over 1000 clients. For me it loads quite fast...

• Looking for specific files of the .bkf. Is this possible?

  I have an external drive on which I had saved the entire desktop.  Desktop is dead (without power on/off switch) and now have a new laptop.  Looking for specific files of the .bkf.  Is this possible? If this is not the case, how can I 'restore' old office files to new pc? XP on desktop and laptop.

  What are the Windows Vista forums. Please repost your questions in the forum XP here: http://social.answers.microsoft.com/Forums/en-US/category/windowsxp.

• I have been using Photoshop CS5 for some time for photos products (jewelry). What are my best options to get the last Photoshop.

  I have been using Photoshop CS5 for some time for photos products (jewelry). What are my best options to get the last Photoshop.

  Hi michaelb.

  You can subscribe to Plan photography for $9.99 a month, which will give the latest version of Photoshop CC 2015, CC 2015 Lightroom and Adobe Bridge.

  Lightroom and Photoshop | Plan of cloud of Adobe's creative photography

  Kind regards

  Mohit

• Hello, I would like to waive the annual subscription for your product (muse of adobe) and go to the monthly payment. How is that possible? (PC)

  Hello, I would like to waive the annual subscription for your product (muse of adobe) and go to the monthly payment. How is that possible? (PC)

  Hello

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• ENVY 750-197c: cannot download drivers Win 10? "We have found the drivers for your product...". »

  I just installed Win 10 (64-bit) on my desktop and I want to install/update the drivers on my computer because my internet on it is a little wonky (and in general I want to update the drivers anyway). However, when I go to the page "Software and drivers" and enter my name/type of product, I get a message saying "we have found the drivers for your product. Drivers may be in development, so please check back at a later date or visit the product home page. ». There were drivers available here yesterday. How long this change usually take? Can someone help me find the drivers of the template from another computer that might work for my computer? Thank you!

  Hello:

  It looks like all the drivers, specifications and manuals are missing from the pages of support again.

  This happened earlier in the week also.

  Another Member of the forum has reported the problem to administrators forum, which will be in touch tour HP, but since I am not employed by, nor do I represent HP, I don't know how long it will take to restore the missing data to the support pages.

  Whether the weekend will not help much either.

• Simple disk alert for specific servers

  Hi all

  Can someone tell me how to alert of simple disk for specific virtual machines please? That is to say if Server X drive E:\ hits 20 GB free, send an e-mail.

  I tried to change the rule VMW Virtual Machine, use of logical disk , but I can't limit the scope to specific servers I want to follow. Very confusing.

  VFoglight v6.6.2 using.

  Thanks in advance.

  You can change the call to the scope to include only the specific virtual machines.

  You can test this concept in the Script Console, using the query line.  Don't forget that everything is case-sensitive.

  First, enter VMWVirtualMachine , and then select query.  You should see all your virtual machines

  Then, enter VMWVirtualMachine where name like '% ServerX' and you should get only back the corresponding VMs.  You can extend this to help where and not built.  for example VMWVirtualMachine where (name like name like '% ServerY' or 'ServerX %') once you're comfortable with that, we can take the step 2.  The '%' is a wildcard character, corresponding to a number any character.

  Now, let's take a look on your particular case, which is a little more complicated, because the name of the virtual machine is not directly part of the object VMWVirtualMachineLogicalDisk .

  We need to start with VMWVirtualMachineLogicalDisk as our base and then extend it.

  Still in Script Editor, enter VMWVirtualMachineLogicalDisk in the query line and select query.  You should see a large number of records of logical drive.  By selecting one of them and selecting the tab panel object below will show you some of the properties of this object.

  Then, enter VMWVirtualMachineLogicalDisk where name like '% C:' and select query.  You should see a small list, showing only C: drives.
  

  That's nice, but as the name property of the VMWVirtualMachineLogicalDisk object is the drive letter, not the name of the virtual machine, it does not help your case.

  The trick is to remember that these are objects, not rows in a table SQL.  And there's a handy article on the object called parentsmodel.  You can see by scrolling down through the selected properties of VMWVirtualMachineLogicalDisk , until you see relatives.  It is a link to the top of the object tree and can be used to select what need you.

  Enter VMWVirtualMachineLogicalDisk, where parents.name like "ServerX %", and you should see just logical drives for the selected virtual machine.  Again, you can build more complex criteria.  In addition, you should be aware that in certain types of objects, parents is not one, but a list of items (e.g. warehouses under the ESX hosts, where a data store can be a child of many ESX host.)  The query in this case would be built in a different way, to deal with several possible outcomes.

  OK, so now we are ready to make your new rule.  You NEVER want to change a standard rule, you should always copy rule, if necessary, the deactivation of the original.

  Copy rule VMW Virtual Machine, use of logical drive to a new rule and go to the tab of the rule definition.

  Under scope rule, you will see VMWVirtualMachineLogicalDisk in the largest area.  This can be entered in the menu dropdown just above him, but it can also be added to by typing directly into the larger area.

  Change the biggest box of VMWVirtualMachineLogicalDisk to VMWVirtualMachineLogicalDisk, where parents.name like '% ServerX' and test the scope of the rule with the little green check mark on the side.

  In green text, you shuold see that your scope has been changed to the desired list of virtual machines.

  Don't forget to press on save, very important

• Where is the support for Sonicwall products?

  I had a post on a topic that is important here since Friday 21. There is no entry at all. This seems to be a forum "network security" generic, non-specific to sonicwall, but I see nowhere elsewhere on the Dell site for questions on sonicwall products. The old forum of sonicwall is read-only.

  -What is it? It is quite appalling. If support for sonicwall products is this low I would hesitate before buying again the sonicwall.

  Uniquehandle,

  This isn't a technical support forum, a public forum that users and come to ask questions and get assistance with their products.

  Yes, just a forum for network security, they are spotted but especially all the posts here are the Dell SonicWALL UTM product and other related products.

  Yes, there is a lot of activity here of people like me, who work in technical support for Dell SonicWALL. But this isn't a replacement for Technical Support requests.

  No, we are not required to answer questions on this forum, but we do so in the interest of the community and to increase the amount of knowledge that our users have. This helps to learn more about the product and have the ability to help other people on this forum when they display asking questions. There is also no SLA on response to any post on this forum.

  Yes, the SonicWALL forum was read-only for a while that we are Dell SonicWALL and our community is now the responsibility of the Dell family.

  Our support for our products is very strong and only get better every day. Yes, our support is provided with a contract, but this is to make sure that we, Dell SonicWALL, can pay the technicians.

  From what you've posted so that you do not have a support contract with us very probably you don't have a case with Technical Support. If this isn't the case, you do not have a case with technical support and troubleshooting went beyond your support contract send me a DM and I will look into the issue.

  WARNING: It is, in any case form or shape, a guarantee that I have the poster of this response, or any other employee of SonicWALL Dell will be troubleshoot or solve your problem via this medium. It's just to discuss the issue with the opportunity to provide a form of help and guidance with your question.

  #Iwork4Dell

• How to give Admin rights for specific applications in windows 7 Stater

  How to give Admin rights for specific applications in windows 7 Stater

  I have a problem in Windows 7 Stater Pack

  I do not know where to place the issue or create the question

  My problem is that I can give admin access to application specific to Windows 7 stater

  in fact I use photon AUNTIE I want to be accessed by a Local user Standard user is not an admin user

  Once I click on the icon of Photon to connect it always ask for admin password.

  I want to work on a local user without admin password

  Please help about this.

  Thank you.

  Hello

  Note: To be logged in as an administrator or enter creditionals administrator account to make changes

  Method 1:

  The prompt that you get is the setting on your computer user account control. You can change the setting and use them according to your requirements and run programs in the standard account. See the below links for more details-

  http://Windows.Microsoft.com/en-us/Windows7/what-is-user-account-control

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider

  http://Windows.Microsoft.com/en-us/Windows7/what-are-user-account-control-settings

  WARNING: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Method 2:

  You can even use the steps below and check-

  1. right click on the program file , click on Properties.

  2. now click on compatibility and select run the program as administrator.

  3. now click on change settings for all users and click ok. Now, check to see if the problem resolves.

  I hope this helps. Let us know the results

  It may be useful

• I want to know what is the best possible settings for energy management software.

  Hey

  I just buy lenovo b 570 e dual core laptop.
  I want to know what is the best possible settings for energy management software.
  Secondly, I want to know b 570 e score if one is to use it.
  Thank you
  concerning
  Nadine
   
  Original title: lenovo B 570 e dual-core

  Hi Nadia,

  I suggest you to use your favorite search engine to find the best possible settings for energy management software.

  If you are referring to the Windows experience index, I suggest you follow the links below and the update of the status of the issue.

  What is the Windows experience index? :

  http://Windows.Microsoft.com/en-in/Windows7/what-is-the-Windows-experience-index

  Windows experience index:

  http://Windows.Microsoft.com/en-in/Windows7/products/features/Windows-experience-index

  I hope that the information above helps you.

• Why not is not updated working level of windows 7 Starter to home premium. I PAID for the product.

  Why not is not updated working level of windows 7 Starter to home premium. I PAID for the product. Do the thing anytime upgrade and after a wait I am informed upgrade failed, what should I do?

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• This serial number is not for a product calling.  Please try another.

  It is an old NET, but I'll re - purpose it

  I am running the latest version of Win 10 (9.6.16)

  Have the full Adobe Creative Suite 3 Design Standard and to register. It works very well.

  Try to install the upgrade to Adobe Creative Suite 6 Master Collection.

  We performed this facility in the past on two workstations without problem. One in-office and one at home. We do not use them simultaneously. I recently reformatted my computer at home and added an SSD. Still, CS3 installed fine, but having trouble with the upgrade.

  Enter the serial number upgrade produces this message "serial number you provided is valid, but calling it a product was not found on this computer.

  

  Another thread of the forum said that we should enter the key series for CS3 here. I have Adobe Standard CS3 Design and enter the key of CS3. I get this message. "Serial number is not for a product calling." Please try another. "

  

  What Miss me?

  Is it possible to register if I install as a trial first?

  Thank you

  Problem has been resolved by support cat.

  A code produced by the installation program challenge was given to a technician who then returned another code which allowed for the installation.

  The technician said:

  Because your CS3 serial number is Volume License serial number, that is the reason why you are not able to use it. So, on an exceptional basis, we can do this challenge code method. Volume license is the license key that can be used by several people, and at the office, school, etc. But your CS6 is the commercial version, which can be used by a single user.

  The process took about 5 minutes once the conversation has been started.