Are there problems with changing the IP address of a system of v5.3 ACS after the initial Setup?

Similar Questions

• I have an iMac7, 1 with Intel Core 2 Duo 2.8 GHz, 2 GB memory, 500 GB storage, iOS10.6.8 and can update in 10.11.2.  must I do cela or are there problems with the upgrade?

  I have an iMac7, 1 with Intel Core 2 Duo 2.8 GHz, 2 GB memory, 500 GB storage, iOS10.6.8 and can update in 10.11.2.  must I do cela or are there problems with the upgrade?

  I don't know about other issues. There are always 'problems' with any upgrade. You weigh against the benefits. I know that you need more RAM. At least 4 GB, maybe more if you can. Don't forget that this system is produced at a time when most of the machines have + 8 GB RAM and when Apple said 'minimum' they really mean it.  I recently inherited a MacBook that has 2 GB of RAM and the Mavericks. When I checked the memory, the use of the system was using 1.95 GB = nothing to run applications!

• Are there problems with the copy a backup of one old drive to another?

  After buying a hard drive TB Seagate external 3 to make backups, I conclude that, because of differences in sector I can not create a backup image to the new drive.  I did an image backup on my Toshiba 1.5 TB and then copied the file to the new 3 TB drive.  While it is a pain, for the moment, I don't see anything around him.  Are there problems with it?

  Another question: If there is a question, is there a way to write the image of the file on the drive that works and then all backups incremental file at CT 3?

  Hello

  Because you can't save the picture of the system directly on your 3 TB hard drive, you can save on your 1.5 TB hard drive, and then copy it to 3 TB external hard drive.

  If you want to restore, you can restore directly from your hard drive 3 TB.

• It didn't install the package when I download the Flash Installer. Are there problems with Adobe?

  It didn't install the package when I download the Flash Installer. Are there problems with Adobe?

  I don't know what you've downloaded; Try

  • Flash Player ActiveX (Internet Explorer)
  • Flash Player plug-in (all other browsers)
  • Flash Player for Mac OS X

• Are there problems with Firefox 5.0 and 1Password 3.6.1?

  I started to update to Firefox 5.0 and noticed a message that the 1Password version I had at the time would not work with Firefox 5.0.
  Are there problems with Firefox 5.0 and 1Password 3.6.1?

  They say you need 1Password 3.6.0 or later to work with Firefox 5.0

  http://Forum.agile.WS/index.php?/topic/5319-Firefox-5-requires-1Password-360-or-later/

  http://help.agilebits.com/1Password3/firefox.html
  

• Are there problems with OS 10.11.4 and opening?

  Are there problems with OS 10.11.4 and opening?

  Upside down images in the mode list. There is no hope of any problem opening fixing. There will be no further development.

• Are there problems with Microsoft 7 and Frontpage 2002? The system shuts down when I try to add a hyperlink.

  The system shuts down when I try to add a hyperlink.  The hyperlink insertion page opens.  But when I try to click on the link that reads "Microsoft Frontpage has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  Edited to add: if I type in the hyperlink, it seems to work.  But in the past, I just clicked it.  But now when I click on it is when she stops.  Strange.  Did not this on the Vista computer.

  Hello CaptainKAG,

  Thanks for posting on the Microsoft answers Forum.

  I recommend you post in the Forum Office where this problem is related to FrontPage 2002. We can install on Windows 7, but is not fully compatible, so some features may not work properly. Office 2003 and Office 2007 are fully compatible with Windows 7.

  Click here to post in the Forum Office.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Are there problems with the accelerometer/compass on the Flipout?

  My flip is great, except that most of the applications that use the accelerometer does not work correctly.

  This includes: drop http://www.android.com/market/#app=com.infraredpixel.drop

  Labyrinth lite http://www.android.com/market/#app=se.illusionlabs.labyrinth.lite, aTilt 3D labyrinth free http://www.android.com/market/#app=com.fridgecat.android.atiltlite, and the reality applications, Wikitude and Layar immersed.

  In all this, left, right, front, rear are twisted.

  On the other hand, the "abduction" game seems to work fine, and it uses tilt left/right to lead your cow...

  I wonder if this a bug in all of these programs, a bug in the Flipout, or just a problem in my phone.

  Else you have noticed this problem on their phone?

  Yes, I have a flipout. I tried Labyrinth lite and it works fine.

  You can try to go in the game settings and calibrate the level. You can also try to do a software reset the phone, but you may have a hardware problem.

  If a reset does not work, then you will need to exchange the phone. MotoBlur will restore much of your data, but you will lose messages SMS and photos - but let's go back to the top of your data on your computer or SD card.

• problem with changing the order of tab on tab control

  Hello

  I am aware that the same question has been asked over three years - but I can't yet find the problem in what I'm doing...

  Description: I have two controls tab, A tab with three tab and tab B with two controls on a Panel. For the following discussion, tab B is of no interest. Each tab control has several numerical indicators, of type integer and double. Now, I want to add a fourth tab control to A tab. This method works.

  Following and problematic stage, in the Publisher of the IUR I select the new tab (most right) and move two positions to the left. It's still ok until I try to display a numeric value of order of tab 3 (the new tab control is left to it). I get an error in calls to SetCtrlAttribute, complain about an invalid control ID... However, I didn't touch any control over the tabs, or add a new control. In addition, I did not touch the generated include file... Visual inspection did not show any changes in the include file (the new tab control is listed only when certain controls are added)

  Posting numbers on the first/far left tab control work only on 3 and 4 which are suitable for the new (and still empty) new tab will generate this error. Adding a control to the new label does not change the bahavior.

  Help is appreciated!

  Wolfgang

  Wolfgang,

  When you get the handle for your tab using GetPanelHandleFromTabPage:

  GetPanelHandleFromTabPage (MainPanelHandle, PANEL_TAB, 0, & TabHandle);

  the third parameter is an index for the specific tab you want to address.  If you change the order of the tabs, you can change the index, too.  For example, assume that you have a digital control on the third tab from left to right.  You want to assign some value, so this, you:

  GetPanelHandleFromTabPage (MainPanelHandle, PANEL_TAB, 2, & TabHandle);

  SetCtrlVal (TabHandle, TAB_numMyNumeric, 1);

  Now, you add a new tab to the left of the tab with the digital contorl.  The new tab is now index 2 and the original tab is index 3.  When you call:

  GetPanelHandleFromTabPage (MainPanelHandle, PANEL_TAB, 2, & TabHandle);

  you get the handle to the new tab.  There is a control with the same ID as TAB_numMyNumeric, so that you get a runtime error.

  Personally, I like to use an enumeration to my tabs so I can keep the lines:

  enum {MY_FIRST_TAB, MY_SECOND_TAB, MY_THIRD_TAB,...};

  So if I redesign the tabs or add a new one I just re - order enums and everything works fine.  Also, I used the same names in my constants of tab, to help keep things straight:

  GetPanelHandleFromTabPage (MainPanelHandle, PANEL_FIRST_TAB, MY_FIRST_TAB, & TabHandle);

  Tony G.

• WRT54GS - problem with changing the router IP

  Here's my problem: I want to change the IP Address of the router (and subnet) to 192.168.1.1 to (for example) 192.168.28.1 (long story).  I can do it on the base of the router configuration page.

  I have a desktop with a fixed address configuration: 192.168.28.90, subnet mask 255.255.255.0, default gateway and preferred DNS server: 192.168.28.1.  Three laptops get dhcp addresses.

  Access to Internet is fine, but local communications on the local network no longer work: shared folders are not accessible, and I can not ping to one local PC to another. (But I can ping anything on the web)

  When I'm back at 192.168.1.1 all is well again.

  Someone at - it includes what is the problem?

  Thank you.

  It is most likely a problem of computer software firewall.

  To resolve the issue, reset the router to 192.168.28.1, then power cycle your network, verify that your Internet connection works on all computers.  Then go into the computer on each computer software firewall and set it to "trust", other computers on your network.

• Are there risks to change the supervisor password?

  Hello
  Someone knows if I change the SUPERVISOR password, could that affect something else?
  
  what I mean is...
  
  If I have to take care of something, or manually change the password in a file any.
  
  I did some testing and I only change the password for odiparams.sh the file and there are no problems, but I don't know if there is something to change.
  I m use 10.1.3.5 ODI version.
  Thanks for your help.

  Personally, I don't see any risk and problem with that but if the supervisor is the only user with supervisor previledge, make sure that you don't lose the password which can be a problem.
  Given that all the other odi bat or sh progran bed in the odiparams, I think that change of odiparams should be enough.

• Can I downgrade to version 3.6 to 4.0 Beta without losing my favorites? Are there problems with it?

  I have problems with version 4.0 beta and want to downgrade to the newer version. Can I download it and install it without loosing all bookmarks? Are there any known issues with this? What do I need to uninstall first 4.0?

  @rog.howe Yes, use Add/Remove programs. You should also see the right to earlier version next to the beta one.

• Are there problems with Windows 8?

  Windows 8 will give problems?

  The short answer is Yes, there are problems. There will be problems with comatibility hardware and the availability of drivers. Bugs in drivers that are technical support available, unresponsive, etc..

  Expect everything.

• Are there problems with Vista SP2? Or have they been corrected?

  Hi, I want to install SP2 on Vista because I improve performance

  But when I installed SP1 I lost all sound and it was a real pain to get him back so I don't want a repeat of this, I also read on the SP2 problems with slowdown system, etc...
  -What is completely stable and free issue?

  Hello

  I suggest you to see this link on more information about Windows Vista service pack 2:
  http://Windows.Microsoft.com/en-us/Windows-Vista/whats-included-in-Windows-Vista-Service-Pack-2-SP2

  Follow the steps in this link to install Windows vista service pack 2:
  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  It will be useful.

• Are there problems with the copy of a plist from a 10.9 to 10.10 machine?

  I'm upgrading of computers that are currently 10.9 to 10.10.5.  Normally we bring many of the plist for the library users.  My concern is that, with many changes in applications, is still a good idea to do this?  Someone had a bad experience?

  Thank you

  If you use Setup Assistant or migration assistant are brought back all the user files.