Are there risks to change the supervisor password?

Similar Questions

• Satellite Pro S330 - how to change the supervisor password?

  Hello!

  On a Satellite Pro S330L Windows is broken, so I can't access TOSPU. EXE. If I know the supervisor password, I can't enter the BIOS program. Bootsequence is HDD-..., so I can't boot from DVD! What can I do to install a new OS?

  Thanks for your help! JO

  Hi jonol,.

  If you know the supervisor password, everything is ok. Just so access the BIOS after you turn on the laptop and enter the password. Now you are in which you can change the BIOS boot order, remove the supervisor password, etc..

  Check this box!

• Are there problems with changing the IP address of a system of v5.3 ACS after the initial Setup?

  I'm migrating from ACS v4.2.1 to v5.3.  I want the final v5.3 system to assume the IP address of the machine 4.2 of origin so I don't have to change any configs on network devices.

  Are there problems with the change of the IP address of the system AFTER the initial installation v5.3?

  I tried without problem. I changed the ip address of the WLC several times.

  You must ensure that:

  1-) you change the switchport accordingly to the appropriate vlan if the new ip address belongs to a subnet of a vlan different.

  2-) make sure that all clients AAA configured to use the new IP address of the ACS servers.

  Here is the procedure how to change the ip address of the interface (according to the doc of cisco):

  http://goo.GL/0BYqVT

  I also changed parIP normal address and it works. but of course, the server must be autonomous before doing this step (i.e. no secondary ACSS registered to him and he is not on the other ACSS in a distributoin).

  HTH

  Amjad

• Change the SUPERVISOR password in configuration of the ODI

  Hello

  I configured an agent in ODI 12 c with the help of a guide in the link below:

  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/FMW/ODI/odi_12c/odi12c_agent/odi12c_agent.html#overview

  Now when J'execute./agent.sh-name = OracleDIAgent1-PORT = 20910 I get an error "ODI-10199: ODI Incorrect username or password" error details is given below:

  [oracle@ODIGettingStarted bin] $./agent.sh-NAME = OracleDIAgent1-PORT = 20910

  New data source 2016-02-10 06:27:51.461 NOTIFICATION: [OGG_ODI_REPO/***@jdbc:oracle:thin:@//localhost:1521/ORCL]

  2016-02-10 06:27:54.030 ODI-1128 NOTIFICATION Agent OracleDIAgent1 begins. Container: AUTONOMOUS. Agent version: 12.1.3 - 17/06/2014. Port: 20910. JMX port: 21910.

  What helps: 127.0.0.1,127.0.0.1,127.0.0.1

  2016-02-10 06:27:57.975 ERROR ODI - 1131 OracleDIAgent1 Agent encountered an error: ODI-1404: Agent OracleDIAgent1 start failure: an authentication error occurred when connecting to the master repository. Caused by: ODI-10199: ODI Incorrect username or password.

  2016-02-10 06:27:57.976 WARNING ODI-1404: Agent OracleDIAgent1 start failure: an authentication error occurred when connecting to the master repository.

  Caused by: oracle.odi.core.security.BadCredentialsException: ODI-10199: ODI Incorrect username or password.

  2016-02-10 06:27:57.978 unavailable WARNING

  2016-02-10 06:27:57.999 ODI-1443 ERROR error when starting agent: ODI-1404: Agent OracleDIAgent1 start failure: an authentication error occurred when connecting to the master repository.

  Caused by: oracle.odi.core.security.BadCredentialsException: ODI-10199: ODI Incorrect username or password.

  I want to know how I can change the password and solve this problem? Note that I did not password coded for the SUPERVISOR in the ODI server configuration step.

  WAQ28 wrote:

  Do we need to use the repository work over here password to encode and then put this password in the xml file?

  No, it should be the password of the account supervisor created when running the RCU (repository creation utility).

  You can change ODI Studio tab if necessary.

• Satellite A200 - 1 M 8: Bios Update 2.20 - the supervisor password has changed

  Hello!

  Satellite A200 - 1 M 8. Update the BIOS changed the supervisor password. Has been bb_aa_yy.
  If I can set this password has become?
  Details: Updated from Vista to Vista SP1. After that the hardware configuration utility does not work.

  Latest versions of the hardware configuration utility, supervisor password and some other are not installed.

  The usual message - the serial number is not valid.

  Hello

  Maybe the problem has something to do with hardware utilitly. So it doesn´t doing is even better when the error message "is the serial number invalid.", but it could be the solution to this problem.

  I suggest you to check these discussions which might help you:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31711&TSTART=0

  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=100197

  If this works, you should be able to install the utiltly equipment and solve your problems...

  Welcome them

• Satellite Pro S300 - how to enter the supervisor password?

  Hello

  I have a laptop Toshiba Satellite Pro S300-11 years and have a problem. One day, I decided that wanted to put a password for the supervisor to the bios of the laptop. Now, I remember this password, but when I have access to the BIOS Setup, I can't watch any o change option disable this password. I can't enter this password to set me a supervisor, and also I can't change some options with respect to the example, the boot sequence.

  How can I remove this password or how do I log in as a supervisor? I see no option for this, and I need to change the boot sequence.

  A big thank you.

  Hello

  On this that I can only say, check your user manual! ;)

  There, I created the following information:
  + C:\Program Files\Toshiba\PassowrdUtility\TOSPU.exe+
  + This utility allows you to do the following: +.
  + Register, remove, or change the supervisor password.
  + Create or cancel a supervisor password token +.

  Check this and then you should be able to remove the password if you know the current.

  Welcome them

• Im trying to change the content of my internet but it askes me the supervisor password and I never set one what do I do?

  Im trying to change the content of my internet but it askes me the supervisor password and I never set one what do I do?

  * original title - I do not know my supervisor password by trying to change the content of my internet, how can I know? *

  Hello

  1. what operating system is installed on your computer?

  2. what version of Internet explore is installed on your computer?

  3. you are the administrator of the computer?

  4. what internet content are you trying to change?

  5. where are you trying to change the content?

  Refer to this article on the lost or forgotten password: http://support.microsoft.com/kb/189126 of Microsoft's strategy concerning lost or forgotten passwords

• Is there a safe way to change the admin password?

  When I got my custom PC built and began working with her six years ago, I had no understanding of the importance of strong passwords. The password for the administrator account on my PC is very low. I said two completely different things on fixing this. 1. it is completely impossible and any attempt will be completely trash the account Admin 2 - it is possible if you use the correct procedure and follow the instructions carefully. Who is the most reliable assertion?

  Hi okieseeker,

  It does not hurt to change the password on the computer, unless you change or forget the password.

  Change the user password

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/usercpl_change_password.mspx?mfr=true

• Satellite Pro C660-29W. How to remove the supervisor password

  Hi all
  I've been locked out of my bios and I don't know the password. My little brother was playing with my laptop computer and accidentally set the supervisor password. Is it possible that I can recover the password or reset it? I really need to change my boot sequence as I just bought a new SSD and need to format my laptop. Suggestions will be highly appreciated.

  Here's my version of bios and details of laptop

  Toshiba satellite Pro C660-29W

  CPU Intel Core i5 2410 M

  8 GB Ram DDR3

  BIOS: BIOS FRIEND - installation utility Aptio
  BIOS system ver: 1.50
  THIS Version: 1.50

  Thank you

  Supervisor password is very important safety device and a kind of reset of the user is not possible. You can cancel it, but you must know the correct password to confirm that you are the real owner computer laptop.

  Toshiba provider in your country can help you with this. You just approve that you are owner of the laptop, and they can cancel it for you. Of course, you must pay for it.

  As far as I know, there are several techniques for the removal of password and it depends on phone model.

  Contact the closest Toshiba ASP and ask for help.

• Need help with the supervisor password

  Dear support,

  I would ask you for help. I have a Toshiba Tecra M5 laptop and 4 years when I install it for the first time, I wonder "supervisor password". I entered my private password and everything was fine. Now, I want to change my internal HARD drive. After upgrading the HARD drive I wonder the supervisor password in a black screen directly after pressing the power button. The problem is that the suppervisor password was entered in windows mode using some Czech special characters "?" (the password is containing these characters). The portable wonder for the supervisor password using a 'back' as intrface - black screen and the blinking cursor and I'm not able to enter these characters Czechs. Can you help me how to do? I'm not able to work with my laptop.

  Best regards, Jan

  Hello

  you have the old hdd to replace to remove the password and replaced by a new one, at this time there?

• I bought the iphone 6 to find her icloud is locked. I tried to contact the owner, but I can't reach him. are there opportunities to take the step of activation? Thank you.

  I bought the iphone 6 to find her icloud is locked. I tried to contact the owner, but I can't reach him. are there opportunities to take the step of activation? Thank you.

  Hello

  You describe Activation Lock, which prevents the unauthorized use of the iPhone if it is lost or stolen.

  This can be disabled either by:

  • The former owner, grabbing their Apple ID and password of the device.
  • The previous owner, removing the iPhone in their list of devices to locate my iPhone via iCloud.com.

  In both cases, be sure to follow the instructions in the first article below.

  If you can not organize or either of these actions, then you will not be able to use the iPhone. There is no way around this security feature.

  More information and instructions:

  Turn off find my iPhone Activation Lock - Apple Support

  Find my iPhone Activation Lock - Apple Support

• Satellite 1000-S158 changed the BIOS password on an empty

  I changed the BIOS password on an empty (blank). I can't access the BIOS. Pressing on enter: it shows the error isn't the right password.
  How can I fix?

  Hmm. sounds you did something wrong maybe you misspelled or set a different password?

  Anyway, the point is that you are not able to bypass the BIOS password screen and in this case you will be unable to start Notepad.

  The problem is that you cannot remove the BIOS password, this can be done by a technician of ASP.

  In my opinion only technician in ASP can help you.

• How to change the bios password remotely

  We're a lenovo shop all. (m58 and more). I'm looking for a way to change the bios supervisor password remoetly. I found the WMI and the PDF orders to go with them but when I run SetSupervisorPasswordRemote.vbs I get "Microsoft VBScript compilation error: due to end of the statement"I am not very versed in VB so im not sure how to solve this problem. "

  If not is it possible to take this back to powershell and use it to change the bios password?

  Hello aford89,

  Although the follwing linked to the thread is on T450 ThinkPads the answer is the same across the range of product; You can only do this if you have already set a password manually.

  https://forums.Lenovo.com/T5/enterprise-client-management/setting-BIOS-password-in-SCCM-task-Sequenc...

• Receive the Error Message "the user profile Service could not connect. Cannot load the user's profile' trying to change the administrator password

  Original title: how to change a password for an administrator account that does not work properly?

  When I try to change the settings for an account via the Control Panel, I get the admin password, but nothing happens. Close the popup box, but the program I want to open do nothing. I tried to change the password itself on the administrator account, but when I try to log on it, the message that appears is "the user profile Service could not connect. User profile cannot be loaded. "So far, I have not found a way to change the admin password or even that the password works. I tried to remove the program responsible for Parental control in the Task Manager, but it is too safe for me to enter. Is it possible to restart the Parental control or the account administrator if I can't access?

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Perform the steps in the article mentioned below and see if the problem persists.
  http://support.Microsoft.com/kb/947215
  
  Hope that helps.
   

• Need to change the wireless password as soon as possible.

  Hello

  I was recently sharing my WiFi with a close friend nearby but unfortunately he, or his children, were downloading music illegally therfore making me get in touch with the Charter, blah blah blah... I tried to change my password for wireless, but for some reason, I can't understand it. I would really appreciate some advice if possible. I thank you all for time and hope to hear from you soon.

  Bryan Stoner

  Hello

  The access password is in the router to verify with the support of the manufacturer of the router. Most are online
  help for this, even though setting up as new. Change the router password, even to change the SSID
  (name) and then only you should be able to open a session.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.