No Gecko browsers load Internet sites not based on Windows 7, but they do it on Windows XP. Also Firefox process does not close and the browser can not shut down or restart.

Similar Questions

• iMac will not shut down or restart...

  I have an iMac 27 "end 2012, running El Capitan 10.11.5 and since the last update to version, it will not shut down or restart. I tried unplugging the power for about 10 minutes, but that didn't work... any notice or is this just a glitch in the latest update?

  DRM92692 wrote:

  I have an iMac 27 "end 2012, running El Capitan 10.11.5 and since the last update to version, it will not shut down or restart. I tried unplugging the power for about 10 minutes, but that didn't work... any notice or is this just a glitch in the latest update?

  Your office is frozen?   If not, stop or reboot can wait for something to finish - you close all open applications?   Allow you your system to connect to the internet (these pesky background downloads or you are not always aware of synchronization)

  As for hard shutdown - with button / stop

  Have you held in the power button for about 15 seconds to stop hard - otherwise he's asleep.

  After unplugging - press and hold the power button in for 15 seconds to evacuate the power of mac - that can help.

• Windows vista (Home premium) is not shut down or restart

  The computer (with windows vista edition Home premium); NVIDIA Geforce 8400 M GT GPU) is not shut down or restart. I suspect it's due to updates of windows do not. The error code that is more common that I've seen is A 80071, 91, and then other codes of error like 80071A2C. Here are updates of security for vista and internet explorer. Please help on this issue so that the pc starts shutting down as usual.

  Thank you

  "md123456" wrote in message News: 0d2c53df-b4e6-41b0-8773-211803475406...

  Thank you very much. Would be a new instal OS solve these problems?

  If you mean a new facility on a reformatted drive or a system recovery using recovery of the manufacture process, Yes, certainly, unless it's a hardware problem - but then you learn nothing about what caused the problem in the first place and so how do I prevent it from happening again.
  WRT your mistakes: -.
  1. nothing to worry about, as most of the machines do not have parallel ports today (unless yours does?)
  (2) it is difficult to talk about this, without more details-, but because they say "dependants", rather that "unload", it can probably be ignored.
  (3) it seems normal - I've seen a lot of PC with this error, and apparently nothing wrong. -It is important only if you are connected to a domain server
  (4) the service (I think) is a result of system crash, rather than a cause of the grip.
   
  It seems that the cause of this will remain a mystery.
  My earlier concern about SR doesn't work not just because of problems still standing stop - but back your data first, so that if the worst happens and you cannot start the system later, you can go to plan B.
  As Lorien says, try a back system restore to before the problem started - although at 2 months, I would worry about the stability of the system later. Since you already said that you are willing to do a reinstall if necessary, give it a whirl :)
   
  HTH
   
   
   
   
  
  --
   

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC

• iMac late 2012 will not shut down or restart

  El Capitan, my iMac running will not stop or restart by choosing shut down or restart. I have to hold the power button to close and then restart your computer manually. Any ideas?

  Please post a report of EtreCheck of your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• Windows 7 will not shut down or restart my computer. I tried all of the suggestions I've seen previously displayed.

  My computer shuts down fine with Vista (64-bit), but not with Windows 7 (Home Ultimate, 64-bit).  It disconnects me and shows the "Stop" screen, access the drive hard as if he does something, but never closes my computer (or monitor) off the coast.  It's the same thing when I'm saying Windows restart my computer.  I always hold the power button to turn off.  Occasionally, the next time I start up, I get a message saying that the computer has been shut down unexpectly, but usually not.  Although I don't think that this issue is damaging physically my computer, it is still an annoying problem.

  So far I have tried:

  -Modification of the settings in my BIOS ACPI.  I don't have the ability to toggle ACPI, only to change between 1 & 3.  I tried them both.

  -Method of "Clean boot" Troubleshooting Microsoft.  Even with all non-essential services and startup items disabled, I always have this problem.

  -Disable Windows Fax.  Only one had this problem, and so I thought I would give it a shot.  Not good.

  -Another forum suggested turning off the M-Audio card.  Tasted it.

  -Yet another forum suggested changing "power settings" in the device to the IEEE Bus controller Manager 1394, allowing the computer stop the computer, or something in this sense.  I see no option anywhere to change the power settings.

  Suggestions of new, I can add to the list?

  After reading a lot on the forums and tried almost everything, patches, disabeling energy efficient features on IEEE 1394 and usb. He hit me, everything indicates that the acpi on the motherboard and the table mps. Changing from 1.4 to 1.1 in the bios MPS table solves the problem and win 7 shutsdown correctly

  ET1

• Windows 7 will not shut down or restart

  Hi guys, basically for the 3 days since my computer won't shut down or restart. I normally turn off every night and I've never had this problem before. I used the tool to update window update, but it says that it cannot complete the installation until I restart, but obviously I can't do that either.

  I tried to change the power does-that is to say buttons when the laptop closed = stop down. But even that won't work.

  Anyone has any ideas that could help me solve this problem?

  Thank you.

  Not sure, but what about the command 'shutdown '? (perhaps with the /r (reboot) option)

  http://TechNet.Microsoft.com/en-us/library/cc732503%28V=WS.10%29.aspx

  or

  http://pcsupport.about.com/od/commandlinereference/p/shutdown-command.htm

• New laptop will not shut down or restart completely

  I have very recently (last week) got a new laptop Acer Aspire E 15 Touch, but I can't seem to stop or restart it.
  The first time I stopped it it close normally, but since I closed it down to do updates (110) there will be no more.

  I'm going to stop it and it just sits on the "shutting down" screen for hours - the same with restart.

  I just had to hold the power key to close it (when it is not closed) or just put on sleep.

  Thank you.

  If you are not able to stop or restart the computer normally due to problems with the Windows updates, you can run the Windows Update Troubleshooter from the following link and check if this is useful:
  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-8

  The following link may also be useful:
  https://support.Microsoft.com/en-us/GP/Windows-Update-issues/en-us

  If the problem persists, we recommend to take it back to the seller for help or contact the nearest respective Acer service center using the following link:
  http://us.Acer.com/AC/en/us/content/service-contact

  Hope this will help you.

• MacBook Air 5.2 not shut down or restart.

  Hello.

  My MacBook Air 13' with OS 10.11.5 won't close (or restart) - usually. I have had this problem since Yosemite, but don't remember exactly under what version it began.

  To be more precise: current stop, all icons disappear (as usual), but the image of the Office remains active. I can always start other programs is Finder that is affected. Trying to Force Quit Finder does not help. Repeatedly (say 99 / 100 to give a number) it closed normally, but nothing in fact different... Judge without plugging anything if there's a device problem. Saute all automatic connect points. Cleaned cache and preference files dead (using Cocktail).

  What is a way I can follow the Shut Down procedure to see where it falls? Activity monitor?

  Thanks for all advice :-)

  Found the solution in an another tread with (almost) the same Air. Uninstalling the Wacom driver (in my case using AppCleaner) solved the problem. I wasn't the way of editing, since the latest driver for my bamboo tablet was the same version I had installed... (5.3.6-6). maybe a new installation works, but for now, I'm better of without the tablet. Thanks to click!

• Windows vista will not shut down or restart

  I have problems with windows vista Dell xps 420 machine which is not closed to restart or exit hibernate without a hard reboot.  It is also in trouble, install programs, for example windows 7 upgrade advisor.  Dell Diagnostics are all ok.  All of the suggestions.

  I have problems with windows vista Dell xps 420 machine which is not closed to restart or exit hibernate without a hard reboot.  It is also in trouble, install programs, for example windows 7 upgrade advisor.  Dell Diagnostics are all ok.  All of the suggestions.

  Hey neurodent

  Check your system files and possibly do a repair installation if the serious errors of the system cannot be fixed

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-click guest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to do a repair installation

  you will need to borrow a vista microsoft dvd if you don't

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Walter, the time zone traveller

• IMac 27 "el Capitan 10.11.5 will not shut down

  Hi,

  iMac will not shut down or restart.

  When you click on the start/stop command, the screen clears in all icons and menus/finder but stuck showing the wallpaper...

  Only way is to hold the power button.

  Acted at the time so I installed a game (stellaris) with third-party software needed to play the game.

  Things I've tried so far:

  -First aid volumes. Came out OK.

  -Clear the game and the third party soft. OK

  -Restarted several times held close button. Problem unsolved.

  -Time to a game of prior time Machine install. Problem unsolved

  -Downloaded Capitan updated but could not be installed because it requires to restart which is impossible.

  Thank you in advance for any help.

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• Because the computer may not shut down properly the recovery fails on HP G60-519WM

  1.) product name and number: HP G60-519WM

  (2.) operating system installed: Windows 7 64-bit

  (3.) error message:

  Impossible to restart the computer

  Windows cannot restart the computer in the

  To complete Windows recovery environment the

  recovery operation.

  4.) all changes to your system until the problem was happening:

  I think I have a type of malware or something because my computer started running slower and I continue to be redirected to Web sites randomly when I use Google or Bing.  Records on the right side of my Start menu as 'Computer' and 'My Documents' disappeared.  I also get this an update for Windows live which stops at 57%.

  Problem:

  There is no restore point on my computer if I want to perform a system recovery back to the image of the manufactuer.  I downloaded the USB recovery Flash Disk Utility for my model.  Now I want to recover my computer via USB, but when I run the advanced recovery mode he's trying to restart my computer.  Given that my computer will not shut down properly, I end up having to press the power button until it stops my computer and the recovery does not continue when I start my computer again.

  I tried to use F11, but then I just end up on a screen that says either press on enter to choose to continue with Windows 7, press tab to move to the bottom of the list or press ESC for more options.  I tried all three and they eventually freeze the screen and keys are starting to make a Summit high-pitched beep when I try to press one, so I end up having to force my laptop to stop.

  I also tried to make recovery by pressing F8 and then choosing the "repair your computer option.  Which causes my computer screen go black, and I end up having to force it to close again.

  Is it possible to restore my computer to factory settings?

  Any help would be greatly appreciated!

  JES

  Hi, Jes:

  Yes, it would be the battery.  The relatively heavy bar that is normally removed retainers of slide.

  From what you described, I am afraid that your PC needs a lot of work (probably a bad motherboard), and you'd be much better to buy a new laptop or refurbished, than to pay a lot of money to fix yours.

  I guess you would have to pay more than $200 for repair.

  I'm sorry this is probably not what you wanted to hear.

  Best regards

  Paul

• Computer Vista will not "Shut Down"

  Why is Vista not 'Shut Down' when we try to? The computer gets to that stage and works on and until what we manually turn off the computer.  When we click on Shut Down, the OS disconnects then goes down at the stop, but isn't.  Anyone facing this problem.  It is found on all 3 computers OS Vista

  Also, when updates Windows tries to install computers work for too long at a time in the mode of installation on the same day.
  Don't know if they are related.
  Thanks for the tips.

  Hi jem820,

  ·         When was the last time it was working fine?

  ·         Have you made changes on the computer before this problem?

  ·         You receive an error message all in stop or restart the computer?

  Follow these methods.

  Method 1: It could be due to a program or device driver interfering with Windows power settings. See the article and try the steps in the article.

  Why my computer won't turn on or off quickly?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-wont-my-computer-turn-on-or-off-quickly

  Method 2: Install the updated drivers for the graphics card on the computer visiting the site of computer manufacturer.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link to return the computer to a Normal startupmode.

• My computer won't shut down or restart

  There was an update of the systems, and after that I installed it my computer is unable to shut down or restart. I have to hit the power button to get it to turn off. When I close all the way down he does is get rid of the toolbar and icon of my office leaving me just my wallpaper. Now, I have an update that requires a restart. What should I do?

  Outdated software for a Tablet Wacom can prevent the closing. If you no longer use the device, please remove the software. Otherwise, update the latest version of the Web site of the manufacturer.

  After following the instructions on the removal link above, you may also need to open the users and groups in system preferences, select the login items tab and remove all Wacom related items. It is because the uninstall program is defective.

  Back up all data before making any changes.

• Re: NB200 won't shut down or restart

  My NB200 won't shut down or restart. It will however hibernate.
  The fan also seems to be continuous. any ideas appreciated

  Hi angmel,

  What operating system are you using exactly?
  For example if you are using Vista and you press the close button in the start menu it does not turn off, it goes to stand mode only. Before you can use this button for farm star function to change this first in the menu options.
  Check this box!

  In addition, you can also configure the action of closing the cover, button / stop, etc..

• Send a message that the computer does not shut down properly after the resumption he out of the hibernation mode.

  My laptop has Windows Vista and is about 3 years old.  It is in excellent shape, but recently it has been brought to my attention that whenever I put into hibernation mode and resume, I receive a message that indicates that the system or computer is not stopped correctly, and so I have to restart the computer.   Why is this happening? and any solution for this?   Thank you in advance.

  Hi SuzanneSchwester,

  Thanks for posting your query in Microsoft Communities. It seems that you are getting a message that the computer is not shut down properly after the resumption he out of the hibernation mode. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  You have problems after you resume Windows Vista from sleep or Hibernate computer

  You can see these articles for more information:

  Solve power problems

  Turn off a computer: frequently asked questions

  I hope this helps. Let us know if you need more assistance.

  Thank you.