Are there specifications for the custom alias email domain?

Similar Questions

• Are there drivers for the recorder sony icd-bp150 for windows 7

  Are there drivers for the recorder sony icd-bp150 for windows 7? I can't recorder to work with the current drivers of dvr3. It works on XP machines but not my computer windows 7...

  Hello sconley3.

  I did some further research and found that, if the worm Software Digital Voice Editor 3.3 is compatible with Windows 7 OS, the recorder itself is not compatible with Windows 7 OS.

  However, you can try to transfer the files from the recorder to a computer with Windows 7 OS installed in it, using the stereo mini plug cable.
  Plug one end of the cable to the headphone jack of the recorder mini stereo jack.
  Plug the other end of the cable to the Microphone Jack on the computer.

  You can follow the link below to transfer files using mini cable plug.
  http://www.KB.Sony.com/selfservice/microsites/search.do?cmd=displayKC&externalID=C1002444

  Kind regards
  ColbyP.

• Are there bugs for the iPhone 6 in iOS 9.3.2?

  Guys my iPhone 6 running iOS 9.3.1 and recently there was a new iOS version 9.3.2. Are there major or minor issues for this update for the iPhone 6 (9.3.1)? Is - this safe ito update this iPhone 6 to the new iOS 9.3.2?

  Thank you.

  I use 9.3.2 on iOS devices 4 without any problems...

• Are there plans for the new ESW 500 models switch with PoE capability?

  I know that current models of ESW 500 switch don't have enough capacity to power all the switchports to 15.4, even if the ESW-540-8 p model has almost enough capacity to power all the switchports to 15.4.

  Reasons why new ESW 500 switch with PoE capacity are necessary:

  • The existing PoE 500 ESW switches have not always enough when these devices are deployed with the UC500:
    • 7945, 7965 and 797 x phones
    • series phones (not yet supported with the SBCS solution) 9900 and 8900
    • PVC2300 Surveillance Cameras
    • AP541N access points
  • The UC560 comes with all the PoE ports and requires at least an ESW switch be deployed
  • Version 48 ports gigabit switch ESW is currently available only in the version not PoE, and we need a version of 48 gigabit ports for users of the UC560 solution.

  Existing ESW 500 switch PoE capabilities are:

  • ESW-520-8 P: 60W
  • ESW-540-8 P: 120W
  • ESW-520-24 P: 180W
  • ESW-540-48P: 380W
  • ESW-540-24 P: 280W

  PoE of ESW 500 switch capabilities supporting 15.4 full power on all PoE PoE ports are:

  • 8 port: 123.2W
  • 24 port: 369.6W
  • 48 port: 739.2W

  Are there plans to release the new ESW 500 switch models increased capacity, enough to supply the full 15.4 to all PoE ports with PoE?

  Hi John - Thank you for your participation in the small community of business support. I talked to our switch product manager and want to share his response.

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style - qformat:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

  We have taken the conscious decision to deliver PoE as ESW and other switches for small businesses for several reasons:

  • Endpoints PoE more attract a lot less than the 15.4 W maximum power. Most IP phones are below the range of 7W.
  • A typical deployment would most PoE devices connect to a switch.
  • For these reasons, the ESW is not burdened cost with the PoE feature which would not be used most of the time.
  • All ports are still able to PoE you can connect up to 24 devices PoE Switch 24 ports to any point in time, as long as the handset is in the title of the budget.
  • Therefore, given that these products are intended for small business and the price is an important factor, we opted for this approach.

  We do not have a product at full power on all ports in the Cisco Small Business portfolio, except in the arena of 8 channels. Within Cisco, Cisco Catalyst products support this today.

  Thanks again for the question,

  Stephanie Reaves

  Cisco Small Business

• Are there alternatives for the large objects through callback JMS?

  Hi, I am developing an application that uses JMS reminder to create this 'multi-threaded feel '. All's well if the data object returns of each MDB is relatively small, but as soon as we ended with the need to send back large objects (for example, an ArrayList of 250 objects k) of the MDB (with 20 MDB active at a given time), it breaks the app when the server ran out of memory when the MDB strikes the setObject method call on the response (server log see extract below). Is there any "known" for JMS problem managing large objects? Are there any other alternatives to recall JMS to create this 'multi-threaded' feature in WLS? Thanks in advance.
  
  
  # < 19 October 2010 01:33:16 SGT > < WARNING > < EJB > < RTAN12 > < AdminServer > < ExecuteThread [ASSET]: '13' for queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <><>< 1287423196150 > < BEA-010065 > < MessageDrivenBean threw an Exception in onMessage(). The exception was:
  means: allocLargeObjectOrArray - size of the object: 9273360, elements of Num: 9273344.
  means: allocLargeObjectOrArray - size of the object: 9273360, elements of Num: 9273344
  at java.util.Arrays.copyOf(Arrays.java:2786)
  at java.io.ByteArrayOutputStream.write(ByteArrayOutputStream.java:94)
  in java.io.ObjectOutputStream$ BlockDataOutputStream.drain (ObjectOutputStream.java:1839)
  in java.io.ObjectOutputStream$ BlockDataOutputStream.setBlockDataMode (ObjectOutputStream.java:1748)
  at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1161)
  at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:326)
  at weblogic.jms.common.ObjectMessageImpl.setObject(ObjectMessageImpl.java:157)
  at weblogic.jms.common.ObjectMessageImpl.setObject(ObjectMessageImpl.java:133)
  at com.hp.it.ipg.vfmaps.services.vfdataquery.ejb.VfDataMiner.onMessage(VfDataMiner.java:163)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
  to $Proxy123.onMessage (Unknown Source)
  at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
  at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
  at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:328)
  at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4585)
  at weblogic.jms.client.JMSSession.execute(JMSSession.java:4271)
  at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3748)
  to weblogic.jms.client.JMSSession.access$ 000 (JMSSession.java:114)
  to weblogic.jms.client.JMSSession$ UseForRunnable.run (JMSSession.java:5096)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:516)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
  
  Published by: user651019 on October 18, 2010 11:40

  It is your writing, you have put in place a use case when the application attempts to use on several large objects in parallel. The FMV is just short of the bunch. Looks like the same thing would be whether it's large objects JMS messages, or another type of object...

  Some ideas: (A) release the memory JVM - possibly by setting pagination (see chapter JMS of the Performance and Tuning Guide), (B) reduce the size of the async message line (search for "MessagesMaximum") in the same guide, (C) increase the memory to the JVM, (D) see if its possible to decompose each large into several small objects/messages object, but perhaps especially (E) do not expect to be able to have multiple threads each operate on a very large object separate simultaneously - each object necessarily consume memory while it is accessed - seriously consider reducing the number of concurrent threads according to chapter MDB of the Performance and Tuning guide.

  Tom

• Video tutorals? Are there specifically for touchscreen PS for the phone?

  Anyone know of any video tutuorials specifically related to the touch for phone please? (I am under Android in case theres a difference with the iPhone version)

  I tried adobe TV but all videos updates that might be relevant have 404 errors. See http://tv.adobe.com/watch/creative-cloud-creative-pages/adobe-photoshop-touch-overview-vid eo /

  These don't seem to be specifically applicable to the version of phone

  http://TV.Adobe.com/show/learn-Photoshop-touch/

  In aid of app files is quite simple.

  Thank you.

  Dave.

  Here are some useful links:

  Please let us know if you have any questions

  Janelle

• Are there tags for the Flash buttons so there navagation for iPad

  Maybe I not looking in the right places, but anyone know of a label or an alt line which can offer the iPad visitors the possibility to navagate a website that uses Flash buttons?  There must be something that can appear instead a button Flash when flash challenged iPads come visit but is not visible if the flash buttons are visible to others. The goal is to find a change in the code rather than review site, by replacing all the buttons, or simply ignore this market growning.

  Any suggestions?

  Perhaps the simplest solution is the one that has been available for years... even this last boom iProduct... before and which is to provide replacement for any Flash content HTML content... made via swfobject, a small Flash detection .js. If Flash is detected... it displays the Flash, otherwise, it displays the HTML content.

  If you don't want to bother making up the overthrow HTML or CSS buttons, open your Flash buttons file .fla and 'Export' (.jgp) image of the Flash buttons... it will be the same size as the .swf... so fits very well. Then place this image in exactly the same

  as the .swf and hotmap nav links directly on the different buttons.

  Who stand up and working first, then if you still want to use Flash, use swbobject to place the .swf in the same

  . Viewers with Flash will see the Flash keys, those without will see the hotmapped picture... will work just great.

  for example:

  http://www.ksowetsuits.com/

  View source... in addition to the navigation code, there is a huge amount of HTML text on the page for SEO purposes... but if you have Flash, what you see is just a very simple .swf... who happens be a unique and simple image.

  More info on swfobject, here:

  http://code.Google.com/p/SWFObject/

  Best wishes

  Adninjastrator

• Microsoft Account: Not available for the New Alias Email

  Hello!

  I try to add a new email address as an alias on my Microsoft account. The email that I would use previously has been associated with another Microsoft account, but long since I disabled the account. I tried to add to this email and received this message: "this e-mail address is already taken. Please try another. "Thinking that I can not properly deactivated this account, I tried to reconnect, only to be told that this account was no longer in existence. I tried to make a NEW account with this email (to see if it works), and once more, I was told that the enamel is already associated with an account. Any suggestions on how I can add this email to my checking account?

  Thank you!

  Windows Live ID support:
  http://Windows.Microsoft.com/en-us/Windows-Live/ID-support

• BlackBerry smartphones are there fees for the use of GPS on the "BOLD"

  New user.  Can you use this free feature when it is on the Menu, or is there something I should be aware of that. Thanks in advance.

  There is no cost to use Blackberry Maps or Google Maps (if you choose to install it).

  According to me, if you want to have voice communications (turn left at the _, etc.), you will need to subscribe to a sort of Navigation plan (like TeleNav I believe).

  BlackBerry Maps and Google Maps will work with the built-in GPS and display your directions/map of the place for you. BlackBerry Maps will follow you even when you don't move - simply no voice instructions.

• Are there updates for the retina display for CS6?

  Just bought CS6 and everything is blurry. Impossible to find info on this subject.

  Only Photoshop and Illustrator supports the Retina on Mac screens in CS6. You must install update thevrelevant.

  Mylenium

• Are there specific codecs or import libraries that will make the first 6 use several types of files?

  Are there specific codecs or import libraries that will allow the first 6 import file types more?  I use 6 first on Windows 7.

  It seems that the only type of file which can be imported in this first release are certain types of AVI files... even certain types of notice will import but then will not appear when it is not placed in the timeline... no MPGs, MP4s, and WMVs, or something else will import at all.

  Virtually all the files I need to bring for first 6 must be converted into AVI with H.264 codec first.

  Any help would be useful.

  Digi

  I'm afraid not.

  Even if you were abel to import the first is not designed to handle these files.

• Are there discounts for employees of the Oracle

  Hello
  
  I'll take OCPJP 6: exam 1Z0-851 very soon. I have not yet voutcher.
  
  Are there discounts for employees of the Oracle? Where can I get more information on this topic?
  
  THX.

  Oracle employees can go to the University of my.oracle.com > Oracle > Certification > certify you > used to access delivery information. You will need to check with your administrator to determine if it will approve the refund.

  Kind regards
  Brandye Barrington
  Certification Forum Moderator

• OfficeJet 8500 Prime will not connect to wireless for the scanning of email

  HP Officejet 8500 first.

  Western Digital N900 router

  Printer is connected to my home wireless network and wireless to my HP Pavilion laptop (which is in the same room).

  I felt for a few years and I do a LOT of scans to myself on my e-mail and rarely have problems.

  About a month ago, I got a new wireless router, and the problems started.

  I had the wireless configuration.  Printer connect to my home wireless.

  If I try to scan to e-mail, I get a message "unable to connect to the server. Check the address and the name of the server.

  I can print from my laptop very well (wireless)

  I have run the wireless network test report (which incidentially, does NOT use the default tray as specified in default values, so I have to remove the media in a status bar and replace them with paper to make turn this test).

  All passes.

  very good signal strength.

  no other network with the same ssid

  Wireless networkes detected: 3

  Channel 11

  everything looks great.

  I connect to my router (from my wireless laptop).

  My router says that the printer is on the network.

  I turned off/power on router to reset.

  I tried the reset network default printer and returning via the wireless Assistant.

  I tried another wireless (5g below)

  I got the preferred wireless network name and password several times.

  I turned the printer deactivation / activation.

  The SSID signal is using 2.4 Ghz (802.11 B + g + n) 20 / 40 mhz channel (auto) AND I ALSO tried with channel (11) just

  The router includes a 5 GHz (802.11 a + n), but the printer never sees this SSID, and tried manually enter the name and password as well.

  I get the same error every time.

  Sounds like you arehaving problems with scanning to email. Can you tell me first if you have tried all the other email accounts other than the one you are using. According to the security on the SMTP servers for the customer, you will have to go and try another account. I suggest to make a Gmail account and attempt to put in place the new feature.

  I would like to know how this happens, and I'll get back right with you!

  -Spencer

  PS I hope you had a great weekend and had a wonderful day!

• Please wait for the customer to political group - stop questions

  Hello

  I have problems with the closing of a machine. When the machine is connected to the corporate network, everything works fine. However, if the computer is connected to the VPN (1 hour or more) it is always suspended when it stops. First step in the shutdown process is:

  Please wait for the system event Notification service.

  This change after 3 minutes exactly. Next step:

  Please wait for Group Policy client windows 7

  is never exceeded (even after a few hours). Machine never off.

  Under newspapers there are always these 4 events when the machine stops in vain:

  1. 6005: the winlogon notification subscriber takes a long time to handle the notification event (Logoff).
  2. 4627: the event COM + a system expired attempt to fire the method of logging on the event {D5978650-5B9F-11D1-8DD2-00AA004ABD5E} class for the Publisher and the Subscriber.  The Subscriber has not responded within 180 seconds. The full name of the subscription is "ISensLogon2". The HRESULT is 80010002
  3. 6006: the winlogon notification subscriber took 180 second (s) to handle the notification event (Logoff).
  4. 6005: the winlogon notification subscriber takes a long time to handle the notification event (Logoff).

  Sense has expired after 3 minutes while there is no event 6006 for GPClient and machine is stuck there for centuries (Please wait for the customer to group policy). I noticed in the system logs that before the machine hangs during the shutdown process there are these errors and warnings:

  • 5783: the session configuration for the Windows NT or Windows 2000 Domain Controller \\server for the domain X is not admissible.  The current CPP of Netlogon call on \\machine to \\server was canceled.
  • 1014: name resolution for the name of the server has expired after none of the configured DNS servers answered.
  • 131: NtpClient could not set a domain peer to use as a source of time due to the DNS resolution error on ". NtpClient will try again in 3473457 minutes and double the reattempt interval thereafter. The error was: the requested name is valid, but no data of the requested type was found. (0x80072AFC).

  There is more than 1014 events for different servers and some 131. 5783 is always alone.

  I did a group policy log, because I thought that I will be able to see where the machine stuck. Below you can see the part of the newspaper GPSVC when the machine stops in vain:

  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xe58
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancellation pending appeals
  GPSVC (2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancelled waiting for calls
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (438.1a04) 21:31:24:327 waiting for user group wire political end.
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xe10
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancellation pending appeals
  GPSVC (218.C88) 21:31:24:327 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancelled waiting for calls
  GPSVC (2d4.9C8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xdcc
  GPSVC (218.1054) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0x20cc
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.9C8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xd90
  GPSVC (218.1054) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.D48) 21:31:24:342 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (218.D48) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (218.1c04) 21:31:24:327 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (218.1c04) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: entering with the event 0 x 2100
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: entering with the event 0 x 1264
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0

  I excluded 1 GP machine and left on the VPN for a few hours, several times. He always stopped correctly.

  However I tried with the VPN disconnection before turning off the machine, I even turned off WiFi but machine still hanging. If I tried to get GP results it takes ages before stopping the machine and he's stuck in the step "to get the user name. Gpupdate/force will never update policy (it stops at policy update...). I tired with the installation of different patches that has not solved the problem.

  I think that there is that DNS issues while the machine is on VPN which led the GP cannot be applied. When the machine tries to close it is always somehow connected. There is no problem with the connection, no GP application script when the user disconnects, not roaming profiles.

  Does anyone have the same problems? All machines are Dell with Juniper NC (VPN).

  Thank you

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet forum: For Windows 7 

  Hope this information helps.

• all rows in the table are not eligible for the specified partition

  SQL > Alter Table ABC
  Exchange 2 Partition P1 with Table XYZ;
  
  Modified table.
  
  SQL > Alter Table ABC
  Exchange 2 Partition P2 with Table XYZ;
  
  
  P2 Partition Exchange with XYZ Table
  *
  ERROR on line 2:
  ORA-14099: all rows in the table are not eligible for the specified partition
  
  The exchange partition works fine for the first time. However, if we try to swap the 2nd partition it gives the error.
  How to solve this error?
  How can I find the lines which are not qualified for a specific part. is there a query to find out the same thing?

  >
  Well, exchange of syntax and logic is not clearly as it should (IMHO). There is no element of syntax that tells Oracle we want to Exchange partition data in a table that is not partitioned or not partitioned into partition table data.
  >
  What? Not sure where you got that but maybe it was before you had first cup of coffee? ;)

  An "Exchange", it's just that; an Exchange. Partition data end up in the non-partitioned table and vice versa. It is meaningless and totally obsolete if "we want Exchange partition data in a table that is not partitioned or not partitioned into partition table data".
  >
  It was decided by Oracle not partitioned table control. If the non-partitioned table is empty, it means you want to Exchange data partition in a non-partitioned table. And if not partitioned table is not empty, it means you want to Exchange data in the table that is not partitioned into partition.
  >
  There is no decision to make. The segments are swapped. Oracle doesn't check, know or even care if one or the other or both segments are empty. 'Control' which is carried out (by default except if NO CONTROL is used) only consists of ensuring all the data in the segment intended for the partition belongs to this partition.

  It is what gives the example of John. This can NEVER work if table1 is empty unless p1 is empty at the beginning:
  1 Exchange p1 with table1
  2 Exchange p2 with table1

  As John explains, assuming that no other operations are trying to put the data from p1 P2 which is not possible if p1 actually contains data.

  You can save it for next April 1!