area 51 8-pin psu

Similar Questions

• Where are the UART pins on sbRIO-9627?

  I'm new to the SingleBoard RIO and I need 5 UARTS, but I can't find RX TX PIN. Where the pins are located?

  Data sheet: http://www.ni.com/pdf/manuals/375466a.pdf

  Product page: http://www.ni.com/white-paper/52801/en/

  RS232
  Edge (Total) = 2 (6)

  Page 42 of the manual to the user began documenting how to expose additional UARTS.

  http://www.NI.com/PDF/manuals/375466a.PDF

  The UARTS are implemented in the FPGA, so the TX and RX pins can be routed to the FPGA DIO lines. Which is defined via the sbRIO generator tool CLIP installed with LabVIEW and implemented by selected a half TON plugin CLIP in the LabVIEW project.

  Page 24 of the RMC design guide also gives more details:

  http://www.NI.com/PDF/manuals/375536a.PDF

  In addition, this presentation of NIWeek walks through the design process RMC and SW tools for configuration of devices, such as the UARTS.

  https://decibel.NI.com/content/docs/doc-43347

  Kind regards

• Problems to remove a dead area of the pinned item files link

  Hello

  I have a user who has an icon of dead in the pinned to the start menu item box.  It is a .pdf document that I can't find on his computer, so I guess she has deleted it.  He can not find by doing a search through the registry database.  I simply can't right-click on the icon because it causes Explorer to crash.  I then have to to bring up the Task Manager, to complete the process on exploring and then restart it.

  Does anyone know where in the registry database, windows Explorer, or a tool would allow me to remove this icon?  IE and Outlook appear and work fine, it's just this .pdf file that freezes everything.

  Thank you

  Hello PS-Phil,
   
  Start the computer in Mode safe and try to remove the pinned item and check if you are able to remove it successfully.
   

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

   

  Check out this link to do the same thing:

  A description of the options to start in Windows XP Mode

• Pins 9425 and 9401

  Hello

  I have two Modules NI 9401 and NI 9425, that I connect to a FPGA, PXI-7813R card through an expansion chassis. When connected, apart from pins to DI31 et0 (in module 9425) and et0 to DI7 (in the NI 9401), I have this other pins:

  • In NEITHER 9425: DI7:0, DI15:8, DI23:16, DI31:0 and DI31:24
  
  
  • Or 9401: DIO3:0, DIO7:0, DIO7:4

  what they are?

  Thank you!

  Joan

  Hi Joan,

  These are the same pins, but you can access it in groups.

  DI7:0 means Digital 0-7 online

  It's the whole story.

  Best regards

  Peter

• I FORGOT THE SCREENLOCK PINE

  Hello. my brother has used my z3 compact once and when he came back to me there are screen locking pin and he told me that he doesn't know the PIN because he did nothing about it... What do I do? I know either the PIN... Pls answer... Thank you very much..

  If you have MyXperia enabled, try this method:

  https://talk.sonymobile.com/T5/FAQ/How-to-unlock-a-phone-w-o-reseting-reformating-the-phone/m-p/9272...

  If this isn't the case, then you will have to reset/format your phone.

• How do PIN you a high back one taskbar?

  How do PIN you a high back one taskbar?

  had a lapse here and all of a sudden went.

  Give me the ability to pin a foldier of a taskbar.

  Original title: pin taskbar

  The task bar are designed to pin the programs only, not files or folders.  If you pin a file or a folder, it is added to the menu for the associated program.

  For example, pinning a photo would add to the list for the photo program.  Pin a letter would add to the list for Microsoft Word (or your document program).

  A folder is added to the top of the file Explorer program:

  

• Possibility to get a range of pins of puppets?

  Is it possible to determine the number of puppet pin on a layer? I tried to use .length, but it does not work.

  Here is an example that assumes that the effect of the PIN is the only effect on the first layer of the model activates.

  activeItem var = app.project.activeItem;

  var puppetEffect = activeItem.layer (1) .property ("ADBE effect Parade") .property (1);

  var pinGroup = puppetEffect.property("ADBE_FreePin3_ARAP_Group").property ("ADBE Mesh Group FreePin3") .property (1) .property ("ADBE FreePin3 PosPins");

  $.writeln ("There are" + pinGroup.numProperties + "pines");

  for (var x = 1; x)<= pingroup.numproperties;="" x++)="">

  $.writeln (pinGroup.property (x) .name);

  }

• Data of pin corner moka solid layers (CS6) scale

  Hi, im new to the forums (no permanent damage if) adobe and im having trouble with mocha, followed by corner pin data. I practiced this effect under the surface of skin of Iron Man 3 video Copilot made a tutorial, but im having a few problems. The first time I did it, everything went well. I got the effect as I wanted and it was astounding. The second time, things started to go wrong. I had all my elements of film in the right place and composed pre. I had followed all in mocha before creating the effect. I selected the type of data correct corner pin (one that does not support motion blur) and copied to the Clipboard. I stuck on composition with all effects sequences and... He got about 3 times smaller. Ive tried to do several times since then and continues to be. Ive resorted using a null object when this happens, but I want to know what im doing wrong. Ive looked all over the web and someone posted probably a problem somewhere, but im tired of searching. Please, if you know which continues, response.

  Thanks again,

  DaKernel

  CS6 course

  Hello

  As Rick mentioned, the workflow you have done in the first post is not the right way to paste the data.  If you are pasting corner pin data to a layer that is not the same size as the model, it will scale down incorrectly.

  In your case, you applied a Mocha mask data to the layer, which reduced the size of the layer to the dimensions of the bounding shape.

  The difference in Andrew Kramer's tutorial is it aligned to the surface to Mocha for tracking of layer data to adapt to full frame, and then he asked the data again to the effect demo layer which is also the same size as the model. It's one of the ways that make sure that the data that happens to mount properly. Just apply the mask then applying tracking data will not work, because the corners of After Effect based its curvature on the dimensions of the layer, not the computer.

  See here for more information on how this works:

  Documentation "Imagineer Systems.

  Take a look at the section called "Applying Corner Pin for layers with different dimensions".

• 0Y5CWX model of card mother Dell Inc. (XPS 12 9250) need manual or help locate the CMOS pins

  Where are the CMOS pins on the motherboard 0Y5CWX?

  There is no "CMOS pins.  If what you're trying to do is reset to the default values, just disconnect the battery and hold the power for 30 seconds.

  If you try to reset a password, note that it is not stored in the CMOS - it is stored in the EEPROM.  The only way to do it is get an unlock code by calling Dell, verify your ownership of the system and entering the password they generate for you.

• The cache/pin layout tables and indexes - Howto?

  Hi all
  
  I touched upon a request by a seller of BEDS to do something I'm not terribly familiar with... they want to "hide" or "pin" a table and an index in memory.
  
  I was looking and saw something to the effect of making the Table1
  
  ALTER TABLE Table1 in CACHE;
  
  However, the seller has been mention some examples that seem to indicate the creation of a pool of Dungeon (a pool of buffers separate cache?).. and then doing something like
  
  ALTER TABLE Table1 STORAGE (USER_TABLES KEEP)
  
  Can someone give me an idea as to the difference between these two concepts... links on how do, etc.?
  
  Thanks in advance!
  
  Cayenne

  Hello

  There are 'rules' to pin the tables and indexes. The Oracle documentation states:

  "A good candidate for a segment in the pool of the DUNGEON is a segment that is smaller than 10% of the size of the DEFAULT buffer pool and has suffered at least 1% of the total i/o in the system."

  Here are the rules that I use:

  -Cache tables & indexes where the table is low)<50 blocks)="" and="" the="" table="" experiences="" frequent="" full-table="">

  -Cache objects that use more than 10% of the size of the data buffer.

  Here is the script I use to automate the assignment of the tables in the pool of DUNGEON.

  ATTENTION: This script is not for beginners:

  http://www.rampant-books.com/t_oracle_keep_pool_assignment.htm

  I hope this helps...

  Donald K. Burleson
  Oracle Press author
  Author of "Oracle Tuning: the definitive reference".
  http://www.rampant-books.com/book_2005_1_awr_proactive_tuning.htm

• Pavilion HPE h8 - 1380t: video card upgrade for Pavilion HPE h8 - 1380t

  Hi all

  I recently bought a map GTX1060 (from a MSI GeForce GT640) 4 year old GPU from nVidia in line in order to improve the capacity of my machine so that I would be able to play Fallout 4 and 3 Witcher (both put my poor old GT640 kneeling - even on lower resolution settings).  It is part of the case and the powers that be (Yes, I plug in the connector 6-pin PSU) and 600W POWER supply is adequate for the task, but I'm starting to think that I probably have a motherboard compatibility issue.

  When I install the card and turn on the PC, it hangs at the splash screen of installation (a common problem from what I've already read on these forums) and that it goes no further (keyboard and mouse do not respond at this time here).  I contacted the nVidia support, and they suggested some changes to the BIOS (disable Secure Boot, activate the Legacy/MSC Mode and switching between legacy and UEFI BIOS selection Mode), but when I access the HP configuration utility (F10 on boot to top with GT640 card installed), these options are not put at my disposal.

  Is it possible for me to access the BIOS settings that nVidia has indicated I should be adjusted?

  This GPU card simply is not at all compatible with my motherboard?

  System Specs:

  HP model number: B4J28AV #ABA (Pavilion HPE h8 - 1380t)

  Motherboard: Pegatron 2ACE(Socket 0); 1.08; Intel Sandy Bridge-E Rev. 07; Intel Southbridge X 79 Rev 05

  BIOS: FRIEND 7.15

  CPU: Intel Core i7 3930 K (3.2 GHz)

  OS: Windows 7 Professional 64-bit, SP1

  Current GPU: MSI GeForce GT640; Driver 10.18.13.6881

  If the GTX1060 is not compatible, which is the highest card GPU nVidia performance that can be used with this motherboard (given the limitation of power supply 600W)?

  Is there another motherboard for this machine which would be compatible with my existing CPU and the GTX1060?

  Thanks for your help...

  Hello

  The h8 1380t has a Pegatron motherboard 'Pittsburgh '.

  You could try to find a future revision of this motherboard. I'm also a 810-150se with a map of the 'Pittsburgh2' system that has UEFI. I use a card Nvidia GTX EVGA FTW 970 with excellent results.

  You will need to check that the Review Board would fit in your frame.

  The other options are:

  1.new want to expedition with Win 7 Pro, or

  2 falcon Northwest.

  In a map of the main current system the permutation of Asus, Gigabyte or Asrock is difficult at best. You have to change other components such as the processor, heat sink, fan and the memory. You can probably buy an OEM of Windows 7 Pro version.

  It becomes quite expensive when you do the math on all of the changes you will have to do. There is no guarantee that you can find a map of the main current system having the correct spacers for your chassis h8 - 1380t.

  Avoid a Skylake processor if you can unless you don't mind jumping through a few extra hoops to install Win 7.

  Please consult this article and go here for the workaround resolved the problem installing win 7.

  Jay

• Inspiron 570 ultimate 'Uber' Upgrade Guide including Overclocking

  After seeing several users asking for help on this topic and to lose contact with the users, I decided it's time to gather all the information and make it as enjoyable as possible. When the project is completed, I will state here duly filled (it will take me some time to put together it). For now, it is

  WORK IN PROGRESS

  Little warning first to users who still hold any type of guarantee for their Inspiron. Upgrade the HARD drive (HDD), RAM (memory) and the installation of video card would not void your warranty, PSU (Power Supply Unit) could be questionable. Dell does not generally recommend change CPU (processors) [as soon as you think about changing your motherboard, your PC is therefore more Dell, unless she card mother Dell from another model, but then it's Frankenstein, in this case you can get help in the forum of harware Tom, but not here], however I would like to present the list of tested processors Dell and there will be another 2 processors not tested by Dell. In addition, you can change the case of do your prettiest Inspiron or to improve cooling, I would say - it could void the warranty as well. Finally, at the end, I would like to talk about overclocking, it would be just not the cancellation of guarantees, it puts you at my mercy, because I'm the only one left who did this and always ready to help others, remember, as soon as you decide to go this way, you could a danger to PC - it might even ignite and burn your place , so basically you do so at your own risk. I'm thinking, if you overclock Inspiron 570 you agree with the above possibilities and would not hold the grudge (or hold responsible) against me or any other Member of this forum if you become homeless because of the fire caused by overclocking, LOL.

  I'll start with the regions less invasive and easier to the more difficult and dangerous.

  The guide consists of the following

  Part 1. Upgrade of RAM.

  Part 2. Video card update.

  Part 3. POWER supply upgrade

  Part 4. Upgrade the processor (CPU)

  Part 5. Cooling of the processor and a general cooling in the original case.

  Part 6. Cooling of the processor and a general cooling in the larger case.

  Part 7. Overclocking.

  If I missed something I go back and fix it, I would try to keep it all in one thread. When I consider the complete Guide, then I would say.

  First things first - information. All the Inspiron 570 manualand next page easy to download driver Driver download page not so easy.

  Before asking questions, than I guess you read the corresponding manuals, so I must not explain, for example, how to open your case, well I hope you understand what I mean.

  Part 1. Upgrade of RAM.

  According to the manuals official Dell Inspiron 570 is limited to 8 GB memory 1333 MHz maximum, but it was found that 16 GB 1333 MHz is recognized, faster RAM would have slowed at 1333 MHz. So far, no one has complained that their RAM (manufacturers) were not recognized by Dell. In general, it is recommended to use Crucial, however, I used Corsair and have not noticed any problems. Also, try to avoid the large heat spreaders, especially if you intend to use the fan Tower configuration push - pull - push fan can block access to the nearest slots of RAM CPU cooler.

  I would try to explain.

  Unfortunately, this is the only photo where you can see the situation.

  

  This is the pattern with the same color RAM code.

  

  4 DIMM 1 - could probably be affected by large CPU Cooler

  5 DIMM 2 - can be affected by the large CPU Cooler

  6 DIMM 3 - will not be affected by the large CPU Cooler

  7 DIMM 4 - will not be affected by the large CPU Cooler

  This info is from the Manual

  Recommended memory configuration

  Model	One module	Two modules	Three modules	Four modules
  570	DIMM4	DIMM4 DIMM3	DIMM4 DIMM3 DIMM2	DIMM4 DIMM3 DIMM2 DIMM1

  Part 2. Video card update.

  If you know, our Inspiron has only 300 watt PSU, so without changing the highest supply updated Sapphire video card (recommend) 7750, or cheaper and somewhat less powerful version is 6670, for anything beyond what you should have to upgrade your power supply.

  Some people have asked if the graphics card and RAM slots would be "intercept", the answer is no. However, to change or add RAM, video card must be removed to allow RAM Jack clamps open, this is approximate photo below, the maximum length of the map is approximately 12 inches or 30 cm, in this case video card would go under HARD drive so you should measure top set.

  

  Watch you 2 SATA slots beside the Video card - they could be covered by the Vcard radiator, if this is the case you should use angle sata cables.

  

  I realized that I did not cover a lot of cards video here. So a little more. "" As see you I placed 550 MSI TI Cyclone OC for its unique cooling ability, this map is very large, but short, measurements are "x (H)" x (W) (L) ', 8.27 "x 5.51" x 1.38 ". I'll add more cards here as users will report.

  XFX Double D FX - 787 a SADC Radeon HD 7870 GHz Edition 2 GB 256 - bit GDDR5 PCI Express 3.0 x 16 HDCP Ready CrossFireX Support video card 9.5 "x 4.4" x 1.5 ". "

  Part 3. Update on power supply.

  This is a general guide for power supply recommended by MSI, I would add at least 50 watt to your final decision, however more better, some say 100 watts is very good idea, argues here. Any standard power supply fits inside (it may be little required some metal parts of the case folding, but nothing major). Just make sure that a new block of POWER 24 pin or 20 + 4 pin, MOBO (motherboard) main power connector plus 4 connector pins supply assistants, 4 cables SATA power and at least a 6-pin PSU video card. It may be modular or not. Modular are much more expensive, regular, you'd have to improvise cables underground of the road maintenance.

  Here are some pictures of the regular POWER supply, so you see that cable management can be a headache.

  

  

  To my knowledge the factory recommended PSU is XFX, OCZ, Seasonic, Enermax and Corsair, I see so many complains of Thermaltake and Antec. Store brands and surprisingly cheap PSU should be avoided if you want stability and assurance that nothing will burn or power supply will last long with the same characteristics over time.

  Then, I used extreme PSU calculator to show that our standard power can support 7750 and Phenom 965 together, no PSU upgrade needed, if no overclock.

  Type of system:		1 physical CPU
  Motherboard:		Regular - Desktop
  CPU Socket:		Socket AM3
  CPU:		AMD Phenom II X 4 965 3400 MHz Deneb C3
  Use of CPU utilization (TDP):		90% TDP
  RAM:		2 sticks DDR2 SDRAM

  Video card 1:		AMD Radeon HD 7750
  Regular SATA:		2 hard drives

  DVD - RW / DVD + RW Drive:		1 disc

  USB:		4 devices

  Fans
  Regular:		2 92mm fans;
  LED:		1 fan 92mm;

  Keyboard and mouse:		Yes
  The system load:		90%
  Minimum POWER supply power consumption:		252 watts
  Recommended power:		302 watts

  Inspiron 570 stock PSU is 300 watts and it is known that this number is somewhat underestimated, so 302 watt is okay. Now, the power supply was in my Inspiron 570 model was HIPRO HP-P3017F3, here are the specs for anyone to chew.

  + 5V = 22 a, + 12 v = 5V aux, 18 a, + 3.3V = 17 a = 2A, - 12V = 0. 8A; Special comment "+ 5V and + 3.3V do MUST NOT EXCEED 160 W.

  If you need a replacement, you can get it here again for $ 38. Not exactly the same, but very similar.

  Tyswhat

  Can I overclock the AMD Athlon II X 2 250 processor with the motherboard stock stock? Or it doesn't work?

  Only the Black Edition processors, unfortunately (already). Yours is not the case.

• How to install the new power supply?

  OK firstly plug...

  Motherboard (motherboard): N-Alvorix-RS880-formfat (Alvorix)

  PC: HP p6703w

  new power supply: GS600

  new game card: evga gtx460

  OK I am experianced abit but still novice when they treat the upgrade myself. So here's my question...

  The mobo has a slot for 24pin power cable, but the current 250w ps uses a 20 pin in this slot. Is it safe for me to use all 24 pins for the ps (GS600) I want to? What was the reason why hp has used a 20 pins on this mobo? I don't want to fry my mobo. Laughing out loud.

  Thank you.

  Welcome to the HP Forum!

  ricofico wrote:

  OK firstly plug...

  Motherboard (motherboard): N-Alvorix-RS880-formfat (Alvorix)

  PC: HP p6703w

  new power supply: GS600

  new game card: evga gtx460

  OK I am experianced abit but still novice when they treat the upgrade myself. So here's my question...

  The mobo has a slot for 24pin power cable, but the current 250w ps uses a 20 pin in this slot. Is it safe for me to use all 24 pins for the ps (GS600) I want to? What was the reason why hp has used a 20 pins on this mobo? I don't want to fry my mobo. Laughing out loud.

  Thank you.

  It is safe for you to install the connector 24 pin. You are miscounting the pins on your motherboards ATX connector. The following image is your motherboard. I count 24 pins. Product specifications for your PC State that the PSU is ATX spec.

  

  Kind regards
  ERICO

• HP Pavilion Elite e9120f homemade my hotter than the Sun (first tl; dr material)

  Well Yes, I'm baaaaack with another question regarding the Pavilion Elite e9120f.

  This problem doesn't become apparent only a few weeks ago, when the outside temperature decided to jump the 20 degrees or more.

  My CPU runs very hot and I'm very worried.

  A nice cool day like today its IDLE at 56 degrees Celsius. On a hot day its 58-61 Celsius.

  It sucks for me because I do very high definition youtube videos and fitness puts them all 4 cores of default of the e9120f CPU, the AMD Phenom II X 4 910 dependents from 98 to 100 percent (in turn calls the temp to never bet greater than 65 degrees, during which the cpu fan goes supersayan and makes the room vibrates with the sound of a Jet engine that is not much, only keep the temperature constant, it don't cool does not desperately).

  First: get a temporary monitoring program that works with this terribly designed motherboard is hard; SpeedFan, cpu - z, nothing works except Core Temp v0.99.6 that works very well. (It is worth mentioning that the bios of the motherboard comes with does not any overclocking of any kind, whatsoever, and if you mention same fan control it is falling apart.)

  I found a number of things:

  The fan on the top of the radiator may be upside

  There is very little air flow in the case

  There is no empty fan on the motherboard connector (photo, page layout sketch)

  So I need to ask some questions to the base time down to a reasonable temperature.

  So:

  The CPU on the top of the radiator fan. It is supposed to blow air down on the radiator or suck air through it? (Blow into the case or suck case, blowing on the radiator).

  IF, for example, the seal of filth gray (sorry for the noob, I don't know what this kind of things question) which normally resides between the radiator and the processor itself was broken somehow, that would be the problem? (I had to remove so that I could lift several tons of dust in the trash, he was released and seems to work fine for a while until now).

  If the gray dirt is the cause, how do I fix/replace it?

  If it's not and it turns out that I need a new cpu fan/radiator, I could get suggestions for under $ 80?

  And would work this configuration:

  fan case normal cover, connected to a plug. Corsair H-50 attached to the CPU, using Connector CPU fan for the pump (pump uses a 3-pin cpu fan connector, which is what uses the mother Violet3 in the e9120f), change the case so the fan and radiator are attached to the area of practice 120 mm perforated on the case, and this is where is Gets a bit tricky : using a spare molex 4pin to PSU and converter who is actually making a 3Pin fan and this connector 3 connector case pin case fan, use another converter (I've SEEN ONE but I can't find the link more) convert the fan 3 pins to a contraption of connector 4pin case fan. I also ask if there is an easier way to put it in place but I can't find anything that converts a molex 4-pin PSU to this type of plug:

  

  I appreciate for any help. This pocket of plasma burning in my cpu MUST END NOW! LOL tl; Dr

  It should not be too much a problem with a 3 pin to 4 pin Just make you line insertion slots.

  Optionally, you could add as a case fan or change the power supply. HP power supplies have very small fans and the area of total air flow (grid holes) is also low.

  Thermal paste is gray grime. You need more than a slim gain of dab of thermal paste rice spread.  Insofar the processor coolers to go, you will need to do some measure the width and the height.  The Corsair and Thermaltake make a lot of CPU coolers.

• X 3 on the A51 09 ALX crossfire

  Hey guys and girls.  I have an Area-51 ALX 2009 with 1000w POWER supply.  I'm wanting to add a third graphics card for my crossfire Setup, but I'm not sure what I should do to get the connections necessary to it.  The card requires a 8 pin and a power connection 6 pin.  I have what appears to be a provision of 8 pins, but its very short and would need extensions if it can be used and I was wondering if an adapter is would be possible on the cd player power beam.  Thank you in advance, I really appreciate.  Here is my current configuration

  2009 area-51 ALX

  Stock MB w / Bios version 10

  Intel Xeon 5650 hexacore OC'd to 4.6

  Corsair H100i cooler

  Corsair Vengeance 12 GB RAM

  2 280 MSi R9 in crossfire

  SSD 250 GB PNY

  Lap times of 120 GB SSD

  Samsung 1 TB HARD drive

  No cd/dvd drive

  I saw your post last month, I didn't answer you at the time, but I lost track of it, so I'll chime in today to this one. There are three power supplies stock of Area-51. The 1000 watts gets a video cable pair but cannot make use of the small connector your P3, P3 will be 'dead', no power to it:

  

  1100 watt, as my old pictured below, can make the P3 go live, & I guess that all 1100watters have been shipped Black w / video extension cable that plugs into P3 (which has connectors are denominated p20 & p21); Therefore, the 1100watters would have got three video cables:

  

  There are two 1200 watt models: J297R & VHM5V (aka KGTGV) chrism of Dell is under the impression that VHM5V is specified in the KGTGV Assembly global supply, IE psu + cart as a "meeting", or the Assembly KGTGV we have all heard about:

  • Alienware Area-51 improved and Area - 51 ALX video card Configurations
  • http://www.Dell.com/support/article/us/en/19/SLN149781/en

  The Assembly KGTGV 'improved' food, was sold to the public as a way to run dual-590, dual-6990 or tri-6950. When I look to the top of the reqwirements of power for 6950, they are the maps of 200 watts. Three of them, we assume so are 600watts max.

  

  Two models of 1200watters get four video cables: two from the fifth case (like your cables 1000w do) both emanate from the chassis of the PSU (welded to the internal card). Each cable, as you know, will be a (primary) 6pin with a 6 + 2 rider (2ndary). If you get x 4 6 p and x 4 6-2 in the overall scheme of 1200w, the combination of which I guess can all connect to the tri-6950.

  Ok. #1 your 1000w PSU is incapable of sorting-280/280 x. not enough power, not enough cables.

  #2 even if you do go to the PSU of VHM5V (currently available on eBay USA) 1200w, 280/280 x is listed as a map of 250 watts. I like to think that vhm5v is about maxed out with tri-6950 or "600watts":

  • Don't let not the 1200 watt nickname fool you, it is not 12 volt 1200watts
  • they are notated as 975watts 12 volt max, there where the video cable rails are assessed about 550watts, tops (46Amps--> 46A x 12V = 552watts)
  • They provide 550watts cards on rails video cable, the rest of 12 Volt is provided through the pci-e motherboard: example, a 6990 valued at 375watts; in general, 300w goes to the card by the cables, the other 75watts passes through the pci-e mthrbrd
  • If VHM5V can power dual-6990 or tri-6950, we assume 600watts is being discussed & it runs near or even above his side max

  Radeon 280/280 x is a map of 250 watt; We assume that most of this 250w through cables, the percentage passes through the pci-e. In a world of sorting-6950 to 200watts x 3 or 6990 to 375w x 2 as the last installation known validated, I wonder if VHM5V can feed tri - 280 which are cards of 250w. We invite you to try & buy VHM5V on eBay or elsewhere online (bing/google VHM5V) (if you need y-splitters or buy an adapter that transforms a 6pin in a 6 + 2 etc so / them) & if we can't run your installation tri - 280... that psu will always have the value of resale... & you can resell it & leave it would seek you to an aftermarket power supply upgrade.

  In addition, be advised, our motherboard x 58 stock may need a 12-volt power adapter called PowerBoost EVGA, in order to saturate the pci-e lanes with 12 volts, mentioned in these discussions:

  • Area 51 ALX 5870 configuration Tri-feu?
  • http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19346132?pi21932=8#19753565

  (don't forget to check if the powerboost can fit into a slot pci in a tri-config, it seems all three cards would block the pci slot, how he is supposed to install into a pci slot, when executing the triple cards I don't know, maybe he can adapt, perhaps not, as it has been several years since I have read in this thread) :

  • Area-51 ALX, upgraded to AMD HD7990, thresholds of random power?
  • http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19563242?pi21932=1#20579067
  • Increased power EVGA is recommended now for the config of your double-280, ok? It will benefit your cards your diet & your motherboard, as all three will not have to 'work' If hard for 12 volt get through the pci-e cards
  • Some motherboards are available w/a 'plug', usually a molex 4pin to help get 12v to maps
  • Area-51 R2 now uses a pci-e 8pin added plug to help get added 12v cards
  • EVGA Pwrboost is the same principle to your x 58 board stock, regardless of the number of cards

  The bottom line:

  • your 1000w won't cut it
  • Double-6990 was maps of 375 watt = 750watts / tri-280 = 750watts
  • You can be 1 owners trying to run 250 watts sorting cards
  • model 1200w can or may not work (& have y-split/adapters for the connex 6pin)
  • If it works it's an easy upgrade (just drag it in there), if it does not work it has resale value
  • Pwrboost may / may not correspond to a tri-config, but will certainly help you if he does & may be required
  • If you continue to use the stock x 58 Board w/all power, you want the powerboost increase 12v for video through the path of the pci cards, since the x 58 is known for the bottle neck
  • PowerBoost will need a molex/device extension to take power, normally sata/device main beam fueling DVDs etc.
  • If the 1200w model does not work, you are looking at a power supply of spare swap

  Area-51 R1 has need "help wiring" in a spare power supply swap, namely an IO master craft edge 10pin cable & normally a 24pin atx extension. In my free time I make & sell psu 'swap kits' for Area-51. As said before, the Area-51 1200 watt psu stock is 1200watts name & can't compete w/a single 12-volt rail power supply which is designed to offer all 1200watts 12V ok? 1200w stock was cut to the top 12 volt rails in "multiple 12v power rails rated max 975watts & only so much of this 975w is delegated to the rails of the video cable, on 46amps or 550watts, okay? Sad but true.

  I currently offers a Nzxt Hale90 1200, XFX / Seasonic XM1 1250w, & Corsair ax1500i swap "kit":

  • http://www.eBay.com/Sch/drago_bludvist/m.html?_ipg=50&_sop=12&_rdc=1

  I'll give the ax1200i Corsair limited again soon, when Corsair back in stock cable that I use for the material, which is May 18 or more (out of stock since Feb), so I'll have to ax1200i offered again in about 2 weeks. If you prefer, oh, an EVGA 1600 watt Gold/Platinum/titanium, or any other brand of power supply that I do not make or offer cables for, basically, buy you it, send me a selection of your new cables, I give you what you need & post put everything back in the same package, Pierrette?

  Corsair Seasonic Platinum hx1200i Platinum 1200 candidates 1300w gold, these are acceptable EVGA among a few others.

  Based on the fact 280 are 250 watt cards, most likely you would take VHM5V to its limit, & to be honest I doubt you want to your power supply to reach its limit: the boot it on the warmer, he runs the less effective, it becomes more juice, etc.. I had my VHM5V professionally tested on a load Tester, he scored an 80Plus silver side, but I probably invest in a power supply with guaranteed nine Platinum/titanium without age, on a used VHM5V which is now several years old as it is. A friend me up if you want to look into an exchange of power supply, because I make swap kits much more time / are planning to retire. If you are good with cables & wiring you can make your own harness of cables & mio of course, here is a useful guide:

  • The ALX files: A theoretical approach to area 51 Power Supply Swap Corsair ax1200i ax1500i Seasonic x-1250 Hale90 new A-51 R2 1500w Psu
  • http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19540327

  When asked if the stock 1200w / 975 watts 12v max power can run tri - 280 who could be responsible for each race to the max (all 750 watts, peak to the intense game power)--> I don't know<-- only="" one="" way="" to="" find="" out:="" buy="" one,="" put="" it="" in,="" try="" to="" install="" a="" pwrboost,="" see="" what="" happens.="" if="" not?="" sell="" it="" &="" go="" for="" a="" psu="" swap.="" an="" alternative? maybe="" sell="" the="" 280's="" &="" try dual-290x's,="" perhaps="" a="" solo-295="">