How to install the new power supply?

Similar Questions

• HP Pavilion p6-2: problems on blocking down after I installed the new power supply on a p6-2207ep

  Hi all

  B4 explaining my problem, I really don't know if I should post this in office, or material in this section of the freezes/crashes/locks but since I posted in freezing section and no results I decided to try here.

  My pc: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c03382032

  I bought a new PSU: XFX TS 550W 80PLUS BRONZE for the GPU upgrade 380 R9 I was planning to do.

  Is there some BIOS I get HP for this cause of power supply from what I read, if I not only one of the things like manufacturer reset to the factory settings may stop working... Currently, my Bios version is 7.11...

  Problems with the new power supply:

  When I closed windows 7, the first problem, the picture freezes on the screen that says "blocking windows down", I waited a bit and nothing, tried to turn off the machine while keeping down the power button but nothing to disable directly in the rear switch of the PSU...

  Second time happened a little different soomething, seconds after freezing again on the screen that says "blocking windows down" windows actually turned off and the screen is off but everything inside the computer case continues to flow fans in light of the power button / stop and was also able to close by keeping pressed power button...

  When I restart the computer, to which some time stops, and only after a few seconds, it turns...

  Also tried the GPU with the new PSU fans worked but no entry in the screen that I guess just a power supply problem.

  ATM, I'm RMA waiting to know if it is a power supply defective or not...

  Problems after the reinstallation of the original material:

  Some of the same problems when I got the new PSU remained namely:

  Windows actually stop and the screen is off, but everything inside the computer case continues to flow fans in the light of the button on / off and was also able to close by keeping the power button...

  When I restart the computer, to which some time stops, and only after a few seconds, it turns...

  What I've done so far to try to fix the problem:

  Restore windows 7 to a b4 point the hardware installation.

  Reset the BIOS

  Hard reset

  Clean boot

  Do you have a full checkdisk which means 0 KB in bad sectors...

  A complete hardware checked all tests with the HP software

  A system file check everything beautiful

  What I fear most is a faulty PSU that may have caused damage to my equipment mainly the motherboard, but could be something else entirely.

  Maybe I need a specific BIOS for that motherboard / PSU combo, but after returning to the source material, the problems remained.

  What I can do because I can only make the software tests since I don't have an extra PC to test the parts...

  Hello

  Disconnect all external devices except the keyboard and mouse when you try to solve the problem.

  Disconnect the PC and removed the CMOS battery.  Press and hold the power for 30 seconds.  Now, replace the CMOS battery and plug the PC give a TI a go.

  Your PC is not stable enough to make a BIOS update. Do not attempt to use the graphics card XFX until your PC is stable enough to make a BIOS update.

• Installed a new power supply, run only windows XP.

  So I recently replaced my power supply, and all respect that seems to be going very well that the computer has no problem running. However, every time I start the computer, it start in Windows XP and immediately requires me a check on windows XP. A screen will appear asking if I would like to activate via phone or internet tool. If I use the online detection tool, he suggests, he says that I can not connect to the internet and sends me in return. If I call the number, I can possibly a recording of the voice asking me the code 40 numbers on my screen. Whenever I enter this code by phone, he says he does not recognize that code and I'm at square one. So basically, how can I get my computer to start as it has always, in Windows 7 and with all my usual data?

  Also, I tried to start in safe mode with command prompt. When I get to the menu Startup and recovery in system properties, it appears the only operating system default is "Windows XP Media Center Edition. I have several hard drives my best guess is that it maintains launch than bad. Any help find how launch of correct would be greatly appreciated.

  TLDR; New power supply, computer guard run windows xp and by asking for activation, when I was previously with windows 7 for more than a year.

  Good guess:

  When you have reconnected all cables in your PC after installing the new power supply, you connected the SATA (data) cable that should go to your primary (generally marked 0) SATA port for a hard drive that has Windows XP on it.

  Check your cables.

• Dimension 4600 doesn't work with the new power supply

  Hi all

  I replaced the power supply in my 4600 today so he would welcome a Nvidia Geforce 7950GT AGP.

  The model is an integrator of Aerocool 500W 80 Plus Bronze. http://www.Amazon.co.UK/GP/product/B00JKVHKSU?

  The 4600 has two sockets on the motherboard. A 20 pin and 4 pin. The new power supply had a 24pin cable that I shared, so it became 20 + 4.

  It is not working properly. With all the connected cables (2 cables for the mobo) and 2 connectors molex to drive HARD and CD - R, there is a flashing orange light on the front of the computer and a green light on the motherboard. Some discs don't look, no noise. Nothing is on. If I remove the power cable from motherboard 4 pin POWER supply lights up and the fan from the CPU. There is no problem when I connect the old Dell 250w PSU back up.

  Some of the reviews on Amazon have said that some cable has been connected to wrong and only he re-wiring to work. I don't know if this applies to me? I took some pictures of the connectors. http://imgur.com/a/6m9pu

  Someone at - it ideas?

  Thank you

  Andrew

  AV115

  Hi all

  I replaced the power supply in my 4600 today so he would welcome a Nvidia Geforce 7950GT AGP.

  The model is an integrator of Aerocool 500W 80 Plus Bronze. http://www.Amazon.co.UK/GP/product/B00JKVHKSU?

  The 4600 has two sockets on the motherboard. A 20 pin and 4 pin. The new power supply had a 24pin cable that I shared, so it became 20 + 4.

  It is not working properly. With all the connected cables (2 cables for the mobo) and 2 connectors molex to drive HARD and CD - R, there is a flashing orange light on the front of the computer and a green light on the motherboard. Some discs don't look, no noise. Nothing is on. If I remove the power cable from motherboard 4 pin POWER supply lights up and the fan from the CPU. There is no problem when I connect the old Dell 250w PSU back up.

  Some of the reviews on Amazon have said that some cable has been connected to wrong and only he re-wiring to work. I don't know if this applies to me? I took some pictures of the connectors. http://imgur.com/a/6m9pu

  Someone at - it ideas?

  Thank you

  Andrew

  AV115

  Have you used the connector 4 pins, which was part of the 20 + 4 P1 12v connector, connect to the P2 4 motherboard connector pins 12v?

  
  See 41, J5B1 Connector [aka P2]

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_dimension_desktops/dimension-4600_service%20manual_en-us.PDF

  
   http://www.AOne.co.UK/prodinfo.asp?ProductID=4523

  Connector 4 + 4 pin 12v PSU is divided into two 4-pin connectors and one of them, can be used for the P2 motherboard connector.

  Bev.

• I use two different versions of Firefox for two different employers - how to install the new version without losing an old?

  An employer requires that I use Firefox 3. The other requires that I use the most recent version. How to install a new version of Firefox to another path without overwriting the old version?

  The best way to have a version be an installation of Firefox Portable. The mobile facility is autonomous and will not affect your installation of Firefox "ordinary".
  
  http://PortableApps.com/apps/Internet/firefox_portable

  Otherwise, you will need to set up a profile specifically for version 2 and make sure the correct profile is launched in each version.
  
  http://support.Mozilla.com/en-us/KB/managing+profiles
  
  http://KB.mozillazine.org/Shortcut_to_a_specific_profile

  Overall, you are probably best to replace your current version of Firefox 3.6.25 with Portable Apps - http://portableapps.com/apps/internet/firefox_portable/localization#legacy36 - version and install Firefox 9.0.1 that your installation "regular".

• Pavilion NC768AA #ABA: HP Pavilion model. a6719f new video card with the new power supply?

  Hello!

  So, I won money to buy (hopefully) a new video card!

  However, I have a problem.

  I don't know which one to get!

  SO, someone please, please recommend a video card for intermediate level games.

  (My budget is less than $280)

  My PC has stock everything.

  Thus, it was purchased as it was when you would get everything first he.

  Yes, I need also a new power supply that is included with my budget.

  Thank you!

  Revionion, welcome to the forum.

  I'd be happy to help you in your choice.  The main problem is, recent video cards require UEFI in the motherboard instead of a standard BIOS to legacy.  HP didn't start using UEFI until mid-October 2012.  The latest maps not requiring UEFI were the series GTX 640.  However, MSI has made a card that has a VBIOS hybrid which can operate with a BIOS.  The best thing to do is to choose a video card you like and contact Technical Support from the manufacturer to ensure that it will work on your computer as it is almost 7 years old.  This will save you problems.  They are the experts on their cards.

  I like Corsair power supply units (PSU).  I suggest at least 500W.  This will give you plenty of power for any card that works in your computer.

  If you have any other questions, let me know.  I'll be happy to help you.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Touchpad ~ how to install the new battery?

  How to install a new battery for my dead touchpad? Finally an I tried to open and ended up breaking a bunch of clips and buttons.

  The TouchPad does not have a device that is not repairable.  However, Google is your friend and comes to success like this, which includes a link to a repair of third-party 'guide '.

• How to install the new BBM blackBerry smartphones

  I tried to find a way to install the new BBM 5.0, but can't seem to understand. I am new to the blackberry world (3 days) and I got an old 8703e that is now configured on my line of personal relationships.

  So I've updated the software (desktop and blackberry), but it said that my BBM is updated to 4.2.1

  I'm on the outskirts of Bell to the Canada and can't do no matter how hard I try. If I go on blackberry Appworld, it cannot be downloaded any other way except by browser, which I don't have, I have only the email and BBM on my Blackberry. Am I stuck without internet for browse and locate this program?

  To use install and use BlackBerry Messenger v.5:

  • A data plan from your wireless service provider
  • A smart phone BlackBerry with 64 MB of memory
  • 2.4 MB of memory available smartphone
  • BlackBerry® Device Software v4.5 or later version

• How to install the new NIC in ESX 4 without having to rebuild?

  I have a server ESX 4.0 (u1) running with a NIC card double port gig.

  I need to replace the network adapter with a quad port NIC dual port.

  I prefer to install the new NIC card and do not have to reinstall ESX for her to see the map.

  Can you give me any advice or point me to the documentation that describes how to do this?

  Thank you for your help.

  If the new NETWORK adapter is on the HCL, simply turn off and install the card NETWORK. No reinstallation is required.

  Supported Community, community rewarded - do questions answered and allocation of points for the job of marking. It helps us all.

• CPU limitation with the new power supply

  Hello

  I have a W510 with 135W POWER supply. Or to be more precise: A 6.75 @ 20V.

  I work at two locations, so I bought a generic 150W PSU with an adapter to mount the Thinkpad. The PSU is labeled 7. 5A @ 20V, so there should be no problems running the laptop.

  Yet, when starting, I get the "this power supply is too low for something something something battery charge" and strangled my i7 at 1.2 GHz, and not the 3.06 there are usually.

  If I boot from the battery and connect the connector of the power supply after Windows is in place, it works at full speed. And to charge the battery very well. Then of course, there is nothing wrong with the juice from the PSU.

  Thus, I suspect that the BIOS does something stupid. Can I override this somehow?

  Friendly,.

  A guy

  Maybe what the ThinkPad does not does not correctly detect the generic adapter. The central axis of the generic adapter does not give the right signal to the laptop power management firmware.

  Check in the ThinkVantage power manager what to say under the generic adapter 150 watts? He said 90 watts?

• How to install the new software Adobe Reader after the latest version of misinstalled?

  Hello, community. May you have a great day.

  My question is this. Latest version of Adobe Reader in my PC has been X MUI, and he has been installed from an external drive G. For this reason, I could not uninstall this version before trying to install the new version 11. And I have to delete it manually delete it is the main folder of my Applications folder. It's all I can not install the new version.

  Thank you now for your attention. Rafe Dominguez, Villahermosa, Mexico.

  Hello Rafe,

  You can try to use this tool first remove all traces of your computer:

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  Then you can download the complete player offline installer from

  http://get.Adobe.com/reader/Enterprise/

  After downloading, restart your computer and run the Setup program before anything else.

• Compaq Presario SR5123WM PC: Installed the NEW POWER PC PSU does not illuminate

  After that through a series of troubleshooting after my PC could not start then would be closed to half way through the startup cycle, I determined it must be a faulty power supply.

  I ordered the exact same PSU for my PC.

  Today, I received the new unit and went to reconnect everything, clean the inside well of dust and debry in the hopes that I could get my PC back tonight.

  Well, it always turns out that nothing is ever simple with computers.

  I installed the power supply cord and noticed the projection of green light at the back of the PC, but when I turn on the unit the green light turns off.  Is there a significance why this would happen?

  Fans never got on, nothing, nada... it means the new PSU is defective, as well?  How can I test to see if it works or not?

  Should I replace the CMOS?

  I appreciate any help or help on this that I don't know where to go from here.

  Thank you.

  p.s. I studied and went through this page for the letter http://support.hp.com/in-en/document/c01684432

  Dnorm58, welcome to the forum.

  If you are certain that all connections are well done, here's a guide to help you troubleshoot the power supply (PSU).  In addition, you can test the memory to see if it has failed.  You must remove all modules and replace them one at a time and start.  The only module must be installed in the location closest to the processor.

• Satellite 5205-S505 - how to install the new OS after replacing HARD drive

  Hello.

  Installed a new hard drive. How to install an operating system?

  I thank.

  Hello

  You have a Toshiba Recovery disk?
  If so, then start on this disc.
  The installation process should start automatically and you must follow the instructions on the screen.

  If you n t have such recovery disc, then you will need to use a Microsoft Windows disk in order to install the operating system.

  Satellite 5205-S505 is a series of laptop Toshiba us and old drivers can be found on the Toshiba U.S. driver page:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• How to install the new hard drive on PowerMac G5

  How it installs a new hard drive on PowerMac G5?

  I have a number of readers of the previous Mac that can fit in this PowerMac G5, but I don't know what - if anything - is necessary to make them fit. Or guides, assistance would be appreciated.  Thank you!

  You need a 3.5-inch SATA drive. Concerning how to swap the drives you can use these instructions to fixit. You can skip step 4 that this plastic cover does not need to be removed. https://www.iFixit.com/Guide/Power+Mac+G5+hard+drive+replacement/1952

• Operating system does not (error) after installing a new power supply

  My Thermaltake 480 ran only 2, 6V on the 3, 3V line and gave me problems with my screen. I installed a new 500W Thermaltake now my OS will not charge.  Enter the bios isn't a problem. But then I get a normal system beep and error loading OS.
  

  I was extremely careful about static electricity. All cables are connected properly as far as I know. When I turned on the switch on the back of food, my computer immediately without pushing me the normal power button in front of the computer. I have been concerned about a power surge when it happened and maybe it's the cultrit?

  In addition to losing some files (please no speech backup), I hate having to reinstall my OS and must go through installing all my programs.

  Any suggestions?

  There is no way that a new PS should affect your boot process, if it is installed correctly. Back in the PC and check all of your connections. You have either loose something in, connected it backwards or completely missed. If necessary, disconnect everything and start again.

  When you go into the BIOS, your hard drives and optical appear actually? They appear on the screen of your POSITION (if it is not disabled in the BIOS)?

  SC Tom
  -There is no such thing as TMI if you request technical support.