Area-51 R2, Front/Rear Panel Audio problems

Similar Questions

• How to get AC 97 Front Panel Audio and Microphone ports to work with Windows 8

  I have a m7277c HP Media Center that uses the motherboard Asus P5LP-(Lithium-UL8E) and has an Audio Jack and Microphone AC 97 spec ports on the front panel. I tried to install the Codec AC 97 drivers for Windows 7 and they do not work for Windows 8. The 'High Definition Audio Codec"Windows 8 drivers only work for the Ports on the rear panel, not the Ports on the front panel.

  How can I get AC 97 Front Panel Audio and Microphone ports to work with Windows 8?

  Hello

  Your model has not been tested for the use of Windows 8.

  For this reason, HP cannot provide instructions to upgrade or Windows 8 pilots.

  Therefore, it will be very difficult to provide a solution.

  Thank you

• HP Envy 23 - K030: Audio problems with HP envy 23-K030 and Windows 8.1

  I read all the discussions on audio problems with the IDT High Definition Audio Driver and Windows 8.1
  I get audio on my speakers ONLY and not the headset.
  I uninstalled rebooted and reinstalled the correct driver by this web site of HP support for my machine.
  no luck - same behavior.
  
  The only thing that worked was the IDT driver installation and Windows device driver high definition.
  The headphone jack are properly behaved and everything is ok worked.  However, I lose the audio Panel BEATS and the functions of the Board of Directors of IDT.   (superior quality sound-even with the built-in speakers).
  
  An interesting thing I noticed, when the Microsoft driver is used (and work) on the control panel for this device, it presents "the left panel making" when the configuration screen for the 'speakers '.  for the official driver of IDT, it shows 4 outlets - none of them say "left sidebar", there's rear panel and a plug of façade.    On the old driver that didn't work, he showed "right pane" and there is no control on the right panel.
  
  I think the pilot is simply wrong of this material. The driver is to look 10/2013-it is as if it were updated for this model ALL in ONE - only when it comes to use the headphone jack.
  
  Is there a better driver (I can't "find one beyond 6.10.6486.0 or 6.10.6491 - both had the same problem.)
  
  I do not use my time to often-rarely-last helmet I used them they have worked. Now, they are not - a few automatic updates upset the balance of the force.
  
  Any help would be appreciated. IF not - it is a problem that a person should study.
  

  Also it is reproducible. I have install generic Microsoft driver-headphone jack works and the sound Jack not pregnant, I re - install IDT player - his fate only speakers and not jack.

  I thought about it.

  BIOS V 80.09 (on this wonderful site to Support HP) - does all the work

  V80.05 - did not work properly with this Version of Bios.

  Thank you HP very useful site if you take the time to browse through all the updates.

• HP 15-5010 omen: Control Panel Audio Beats / HP Omen

  After you have reinstalled the sound drivers HP I can't open Beats Audio Control Panel. When I try to open Control Panel Realtek just opened.

  Hi @Mendreyk,

  Welcome to the HP Forums!

  It's a great place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the HP Guide's Forums:

  Learn how to post and much more.

  I understand that after upgrade to Windows 10 and reinstall the HP audio player you are unable to open the control panel Audio Beats.  When you try to open it, the Realtek control panel appears.

  You'll try this step.

  Uninstall the audio driver and then run Support Assistant HP.

  Please read this post from @erico and let me know if this helped.  Not able to find the Beats Audio after upgrading to Windows 10

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  
  

  To show recognition for my efforts please click the Thumbs Up icon below.

• His laptop PC and Audio problem

  Hello

  I have a laptop of M6 HP ENVY after I upgrade my PC, there is no sound at all. It shows no speakers or headphones are connected. IDT High Definition Audio CODEC has been disappearing. How can I reinstall it? Could you please help solve my problem. Thank you very much!

  Hi Joyce,

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59861.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, turn off the laptop by holding down the key SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  One time finished, disconnect the power adapter, and then remove the battery.  Press and hold the power button for 20 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Audio problem (NEED HELP)

  Hello

  I met a very weird audio problem yesterday, I'll try to explain as best as possible what the problem is.

  For some reason, I can hear audio in games and videos I have in my computer very well. But the problem is that I don't hear nothing else coming from my pc, I do not mean the being emptied recycling bin, I don't hear any sound of internet explore or firefox, even when it starts I can't hear anything in my headset.

  But when I test with my audio software (Realtek HD audio manager) or when I use of playback devices I can hear JUST fine.

  I think that this problem started with livestream, I used it yesterday and it has caused a few errors that required me to restart my computer.

  So please if anyone of you has a solution for me I would like to hear it, I quite to reinstall my audio drivers fiddling around with Device Manager.

  Thank you for your time, I hope to hear from you soon.

  If you need further details please do not hesitate to ask.

  What happens when you test these sounds in the control panel - sounds - sounds tab?

  When you re-install your Sound Drivers have you checked to make sure that you have installed has shown
  upward into the device as Manager they often rollback so you need to install - reboot - check - repeat until the
  vouchers are installed

  Click right speaker in the near right lower clock - reading devices - right click in white/white
  area - check Show hidden devices and display devices disabled. To the lower right of all stakeholders
  Properties - check the settings on all tabs.

  If no joy try System Restore to save before this happened

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Audio problem in the laptop speakers. (Redirected)

  I have Dell Vostro 3546 Since a few days the laptop speakers do not work properly. They produced a sound of frying, but now the sound sucks. But when I attach headphones to the laptop but do not select the headset as device by default, the speakers work perfectly with any aberrations. The speakers work fine then. Please give solution to this.

  Thanks in advance.

  Hello. If you still experience audio problems, please post your question on the portable Audio Panel. Include the operating system you are using (i.e. Windows 10).

• XPS 8700, out-of-box speaker 5.1 audio problems

  I had ongoing audio problems since the purchase of my XPS 8700 8.1 desktop system of 64-bit Windows on January 15 and set up with my speaker Altec Lansing 5.1 system existing. The strangest thing happens when I play audio from different sources.

  When I use YouTube programs and music of Windows, Dell MaxAudio Audio Pro software plays audio perfectly thanks to 5.1 speakers. But, when I listen to music via iTunes or try to watch a movie from a DVD factory in my factory installed DVD player, the audio plays through my two front speakers.

  In addition to the issue with my 5.1 speakers, I have constant audio noise/hiss through my speakers. But, it is stranger than most of the time when I move my mouse quickly, I can hear the movement of the mouse in my speakers. The 'mouse noise' is minimal, but you can certainly hear coming from the speakers.

  I spent the greater part of the past month trying to find a solution to these problems - especially the sound of hissing sound coming from my speakers and iTunes music only 2 front speakers and not my sub or rear speakers (sometimes audio will be same break in iTunes).

  I had no chance whatsoever to find a "fix for the problem of iTunes/5.1 speakers, so I'd appreciate any help on this. About whistling noise emitting speakers, here's what I what I met so far, but I have yet to try it (this solution came from Google):

  SOLUTION: Go to the Realtek site (www.realtek.com.tw) > click on downloads in main menu > click on High Definition Audio Codecs (software) > accept the advice > download 64-bit Vista, Windows7, Windows8, Windows8.1 driver only. Version R2.73. I clicked and downloaded the link US2: 64bit_Win7_Win8_Win81_R273.exe (103MB). I then ran the installation program which required two reboots to install completely.

  ITS OWN PURE! The hiss is now gone when listening with my speakers. Moreover, the Dell Audio MAXX Audio Pro, which is delivered on the Dell XPS works always. I don't know what hidden feature, I could have lost, but I consider that it is resolved.

  Someone has already tried this solution but who has experienced similar problems than me? I hate to be "Jackin ' ' autour with new software download and edit the factory specifications on my brand new computer. But I want my computer to work properly with my 5.1 system speakers, which worked well with my previous Dell desktop computer which was in the process of Windows 7.

  One last question, can someone please clarify for me if the Dell Audio MaxAudio Pro software is a product of Realtek? I sent a support one or twice with the solution (Google) I listed above, but nothing but crickets from Realtek Realtek. Customer service poor, to date.

  I thank you in advance for any help and solutions/workaround solutions, you can suggest.

  It is their integrated (Realtek ALC3861 audio 7.1) product with an overlay software from Dell. So yes, you must use their site to get the latest audio driver. Our driver is very old, 20/11/13. I used the same audio driver of detail on my Alienware X 51. Works very well. I added instructions in the FAQ.
  * Go to the top of the Audio card to the desktop computer
  * Open Desktop Audio FAQ
  Open the Office PC Audio drivers
  * Read "Update Realtek HD Audio"

• After extraction of cd audio problem

  I ripped a cd and receives no sound library.  Content of the album is visible but don't get crackling

  Hi leni22,

  (a) what player do you use? Have you checked with another drive?

  (b) you are able to play the files on the computer? Don't you hear sound?

  I suggest you try the following steps:

  Try to read the files ripped on another computer to eliminate the problems of tear.

  Step 1: Run the fixit available in the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

   

   

  Step 2:	To disable improvements audio speaker

  1. Open Audio devices and sound themes by clicking the Start button, click Control Panel, hardware and sound, and then clicking sound.

  2. on the playback tab, click speakers, and then click Properties.

  3. click on the enhancements tab and then select Disable all improvements.

  If you do not see the enhancements tab in the speakers Properties dialog box, these features are not available for your speakers, and this procedure is not applicable to your computer.

  If disabling audio enhancements solves the audio problem you are having, this indicates usually that your audio driver needs to be updated. If disabling audio enhancements does not resolve the problem, contact your computer manufacturer for assistance.

  See the link below for more information

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• audio problem when you play via HDMI in windows 7

  I'm reading of movies from my pc through my external graphics with my bravia sony using a HDMI cable, I can see the video but the sound is not coming. I have made some changes as the choice of the audio system by default etc but to no avail. could u please suggest me the exact solution that will be useful for me.
  MY id windows 7 64 bit OS.

  Hi rahul_8505,

  Cables VGA, DVI and component video don't support audio signals. However, HDMI cables are supported, but not all, audio signals compatible HDMI video audio support cards. If your TV has an audio input, you might be able to connect an audio cable separate from their computer directly to the TV card. Otherwise, you need to connect the audio signal to a different device, such as external speakers or your stereo. For more information about sound cards, see sound cards: frequently asked questions: http://windows.microsoft.com/en-us/windows7/Sound-cards-frequently-asked-questions

  However, try the steps below and go back with the results to help us better solutions to the problems

  i. click on the button 'Start '.

  II. click "Control Panel."

  III. with the control to the "Control Panel Home" Panel, click on 'hardware and sound '.

  IV. where it says "Sound" in green letters, there are three options below that are in blue, click on "manage Audio devices.

  v. This will bring up a window titled "Sound".

  VI. on the tab 'Read', are listed the sound options at your disposal. It should read "peripheral digital output (HDMI)" click on it.

  VII. There will be a check box this option.

  VIII. the sound must now play through your HDMI is connected to the TV.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 Audio problem IDT plays through speakers and headphones

  I recently took possession of old Windows 7 Dell Inspiron N5040 my brother who runs the audio driver IDT HD Audio, the problem is that even when headphones are plugged in, the computer still plays sound on the speakers, I tried to uninstall and reinstall the driver, update the driver software and I still cannot fix. I thought that maybe the problem could be fixed with sound in the Control Panel, however, I can't find the device labeled "Headphones", only two devices listed are "Speakers/headphones" and "helmet of Communications." How can I do so that the system only plays sound through speakers when the headphone is not plugged and only plays the sound through the headphones when they are?

  Hello

  Please contact Microsoft Community.

  I understand that you are unable to play music through the headset and it still plays sound to speakers.

  To better understand the issue, please send us the following information:

  1. This headset works with other computers?
  2. Have you tried to use other headphones? The problem persists?
  3. Are you facing this problem with a particular application or does with all applications of music?

  I suggest you follow the steps described in the article below and see if it works:

  Open the hardware and devices Troubleshooter

  Tips for solving common audio problems

  You can also check the suggestions provided by Aziz N December 13, 2011 and the Mike991 , February 12, 2012 in the article below:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/sound-playing-through-Laptop-speakers-even-when/07289d2c-BF3B-4395-9c6f-dfe0c5151821

  Hope this helps, get back to us if you need further assistance for Windows.

• Audio problems and mask when reading not on no FULL quality

  Win 10
  I7 6core
  GTX980 4GB - had the same problem with the previous cards + latest drivers are used and have had the problem with older drivers.
  32 GB of Ram
  Body CC2015

  Working with and reading Dragon RED 6 K images on the timeline, the audio track falls inside and out. The meters also stop working when audio is de-energized. It matters little if the audio is the zero song recorded on the RED or if it is external audio synchronized to the top. The issue seems to only happen when the playback quality is not set to FULL quality, what quality is set to FULL rear audio playback perfectly reading Dragon 6 K sequences in real time is a bit beyond my machine if it isn't really a viable option. The question goes as far if I disable the layer with RED film and just play the audio layers so the audio recorded appears to be very well.

  According to the other forum posts, I tried compliant audio to a drive other than the one with the RED film. I also tried to move the audio to another drive as some have suggested that the issue was on the HARD drive that contains the images RED 100% reading. None of these options worked. I can never remember running into this issue Edition and playback of images of RED EPIC 5 K. And did I not the audio problem when working with lower resolution files.

  I also met other issues in trying to work with the Organization of reading other than that of the TOTAL quality. The use of masks on effects GPU accelerated often causes the whole layer to move off the coast of the viewer project or black glitter during playback. When stopped everything of fine. A quick fix is reading quality INTEGRAL, but once again this is not always possible according to the number of applied Visual effects. Also the engine of reading mercury to the software not 'fixed' the issue of the mask, but it's not really useful in practice. Have had the problem of masking for a long time and initially, I thought that it was related with colorista III, so I grew up with the red giant. They were able to reproduce the issue and noticed that it happened with the other native Ppro GPU accelerated effects, meaning that it was a body does not issue a colorista problem. Support red giant apparently passed on the issue to the agency team, but that was back when colorista 3 is out and still no solution.  

  
  Let me know if you need more information.

  See you soon,.
  James

  Update: CC 2015.2

  Masking question can be solved when you right click on the viewer of the program and then click left high quality playback.

  Still no update on the audio issues however.

  Update 2: CC 2015.2

  Audio is de-energized is more if you delete the audio tracks of RED Dragons. Only play .wav files under the Dragon pictures with audio in sync, I no longer get audio drop-outs. This may apply to other codecs as well.

  First step: good audio sync with the zero track.

  Second step: remove the audio tracks of cameras.

  For me, that stops my audio stall and not to come back.

  Update 3: CC 2015.3

  High quality playback is at the origin of files PNG away from their intended position and also no longer works as it did in 2015.2. Not sure about her work at all TBH.

• Audio problems on real videos

  In a club and audio on snapchat works fine but the audio on real videos * and is more often just static. Are there ways to recover the audio real video?

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You lose no data by doing this.

  If your issue is not resolved there, check the troubleshooting article: Microphone problems

• Ever since I started to update to 34.0.5 I have known many audio problems.

  Since Firefox updated to 34.0.5, I have known many video and audio problems. At first, I couldn't play the videos at all, but install Shockwave Flash, which sets. All my videos play in silence. I've updated my plugins (Quicktime and VLC were the only ones to ask for an update) should not have solved the problem because I do not believe that I was actually using these plugins at the time, but nevertheless, it seems to have worked. Now I can play videos with sound, but the quality of this noise is severely reduced and even sometimes staticky. What gives?

  These are the same products - 'adobe flash player' is the consumer in the face of term "shockwave flash" the technical name...

• Control Panel audio DTS

  I have a hp pavilion 15-e078ea, core i5 processor, clocked at 2.6 ghz, 8 GB ram, 8.1 64-bit windows

  after update to 8.1 windows control panel audio dts does not allow me to use the audio improvements or

  the graphic equalizer

  I looked on hp support and makes all driver updates and it still does not

  I guess it's a software problem. will there be an update?

  for anyone who has the same problem I uninstalled (via programs and features) of the version of the audio driver realtek high definition 6.0.1.7010.

  restarted the pc and reinstalled the driver from the hp website and it solved the problem.