After extraction of cd audio problem

I ripped a cd and receives no sound library.  Content of the album is visible but don't get crackling

Hi leni22,

(a) what player do you use? Have you checked with another drive?

(b) you are able to play the files on the computer? Don't you hear sound?

I suggest you try the following steps:

Try to read the files ripped on another computer to eliminate the problems of tear.

Step 1: Run the fixit available in the link below

http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

 

 

Step 2:

To disable improvements audio speaker

   

1. Open Audio devices and sound themes by clicking the Start button, click Control Panel, hardware and sound, and then clicking sound.

2. on the playback tab, click speakers, and then click Properties.

3. click on the enhancements tab and then select Disable all improvements.

If you do not see the enhancements tab in the speakers Properties dialog box, these features are not available for your speakers, and this procedure is not applicable to your computer.

If disabling audio enhancements solves the audio problem you are having, this indicates usually that your audio driver needs to be updated. If disabling audio enhancements does not resolve the problem, contact your computer manufacturer for assistance.

See the link below for more information

http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

Thank you, and in what concerns:

Ajay K

Microsoft Answers Support Engineer

Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Latitude E5520 Audio problems after upgrade to win 10

    I have audio problems after upgrade to win 10 64-bit.

    Dell Latitude E5520 IDT 92HDxxx HD Audio
    Hardware ID:
    HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A & REV_1001
    HDAUDIO\FUNC_01 & VEN_111D & DEV_76E7 & SUBSYS_1028049A

    (1) if I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

    (2) if I use the latest Dell driver (IDT 92HDxxx HD Audio Driver) I hear initially via speakers, but as soon as I plug in headphones I can't switch back to the speakers (i.e. switching between the speakers and the headphones does not work) and my laptop computer microphone works.

    I would be happy to provide more information and help to debug.

    To a Microsoft Community Forum, I received the following reply from Rob Brown - Microsoft MVP:

    *************************************************************************
    Hello
    AS OEM Dell is responsible for the good operation of the equipment both
    and Windows. Check their documentation online with Dell Support, and
    drivers and ask questions in the forums about known problems. Make sure that you are
    Run the latest version of the BIOS, chipset and drivers.
    I hope this helps.
    *************************************************************************

    I understand that the Latitude E5520 does not appear on the Dell "Computers tested for upgrade to Windows 10" list... However I was hoping maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

    Thank you
    John D.

    johnsdagg
    AS OEM Dell is responsible for the good operation of the equipment both
    and Windows.

    Hi, John. It's quite nervous of a member of the MS forum say that Dell is responsible to operate Windows. It wasn't Dell but MS who claims that Win10 has most of the necessary drivers and if not then the drivers Win7 and Win8.1 would work.

    johnsdagg
    I was hoping that maybe Dell could find in the goodness of their hearts to a updated driver IDT 92HDxxx... pretty please?

    I doubt that it is possible for two reasons. Dell went from IDT Realtek as the audio seller so probably not more a a contract with IDT, if IDT even exist anymore. A year ago IDT was acquired by another company. I do not know its current status, but it is sure that the acquiring company will not be upgrading old software IDT. Reference Dell itself does not write the audio drivers. Even when IDT was the seller I believe that Win7 drivers are the final versions - no version 8 or 8.1 I think.

    johnsdagg
    If I use the built-in driver to Win 10 ("high definition Audio Device") I hear speakers/headphones and switching between the speakers and the works of helmet very well but my laptop computer microphone does not work ("not connected").

    The native Windows audio driver can't stand struggling external mic. It is a MS 'known problem '. MS must implement a decision-making support, but there is no indication that it will be. Meanwhile, you have two workaround solutions. You can switch backwards between the natives and the IDT drivers. At some point Win10 could leave the IDT driver works correctly. Or get an outlet cheap usb audio to the microphone. Struggling running out-audio driver usb Windows native usb and so dependent no driver IDT.

  • Audio problem in Dell Inspiron N5110 after the migration on Windows 8.1

    Hi all

    I installed the latest IDT High Definition Audio drivers available on Dell Support Center for windows 8. After you have installed everything works well, if I use the internal mic. When I use an external mic, after activating Jack microphone, reading of modified record device status "currently unavailable". When I use the internal mic, it works well. I don't know how to solve this problem. Early on I use this laptop, it works perfectly except audio problems. Please share a solution for this.

    Thank you

    Thanks for the reply. But Jack mic works well. I need active Rec.playback. When I activate Jack mic and record playback device, then change to "currently unavailable".

  • Audio problem with WIndows 8 OS of the beats on the Pavilion DV6-6109tx

    Hello! First of all, my apologies if I posted in the wrong section or the bad, hp support forum do not know where to post.

    Now, coming to the point, encircled sliders Beats Audio Control Panel do not work as shown in the attached snapshot, makes no difference at all.

    Since I couldn't find Windows 8 drivers for my laptop model (very strange since I saw older models, getting divers to windows 8, but not my model), I tried different drivers but none of them work.
    These are audio driver packages I've tried:
    sp58226.exe

    sp59154.exe
    sp59861.exe

    Without these parameters of non-working is terrible.

    So if anyone can help me, I'll be really grateful.

    Thank you.

    Just to note, it does not appear that this unit has been certified for Windows 8.

    This site gives an idea of what to expect during the upgrade to Windows 8.

    The only step I can recommend at this stage is to install the driver of Windows 7 BEATS being related to the driver software audio compatibility mode.

    1. Download this driver.

    2. run the download when it's over. Follow the instructions and you should get a screen that asks you where to save the files. The default value must be c:\swsetup\sp55094. Take note of the destination on the screen. Click next and must complete the extraction process.

    3. after extraction, it opens a new window for installation. Cancel this window.
    Navigate to the folder of extraction.

    4. in this folder, find the real Installer. This is usually setup.exe. Right click on this file and select troubleshoot compatibility.

    5. follow the resolution of compatibility issues by selecting automatic options.

    6. one of the Setup screens will be a button for test program. Click here to begin the installation.

    7. Once completed, it must be installed in compatibility mode.

    This will give the best chance of success. If it does not, then it's a deeper problem of compatibility as Windows 8 driver architecture is different from Windows 7.

  • Pavilion 500 215 el: audio problem Windows 10 anniversary update

    I have an audio problem, then before moving to Windows 10 or the update of the anniversary of the audio working properly after the update I noticed immediately that the sound is distorted or "crunches".
    I haven't identified the problem because it's random, very often and it's very annoying, my sound system is its IDT DTS + I tried to reinstall the drivers with the latest version but some of the problem persists...
    Only, I noticed that the problem is more 'feel' when the bass setting is higher or when I change the audio setting to my taste.
    I ask you to help also became very boring because without my custom settings is really horrible!
    Thank you.
    Sorry for the English, but this isn't my mother tongue, I used google translator.

    Hi there @Alexcpp,

    Welcome to the Forums of HP Support!  I understand that, after the update of Windows 10 anniversary, you had some sound problems.  I'm happy to give you a helping hand with this.

    Check the support page for your model of HP Pavilion 500-215el desktop PC, there don't seem to be updated drivers, and you have already tried to reinstall existing ones.

    You can always try to use the HP Support Assistant, HP PCs - using HP Support Assistant (Windows 10, 8, 7) to see if there is a driver available that is not displayed on the support page. It is unlikely, but there is always a chance that the page has not yet updated.

    Another possibility is to make some adjustments on your system, just in case there is another driver or software that interferes with the audio, which could cause problems of lag. You can try the search, even if these: computers HP - computer is slow (10 Windows), HP - slow Internet troubleshooting (10, 8 Windows) computers.  They are never a waste of time because often there is something that could help the overall performance of the system.

    Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

  • HP Probook 430 G2: Audio problem

    I got my new laptop (HP Probook 430 G2) barely 4 days ago and I already had a problem with it.

    I find this question every time, when I try to listen to music etc., headphones or 5.1 speakers (both using 3.5 mm jack).

    When I use Google Chrome or Windows MediaPlayer etc. If I stop to listen for 5 minutes (stop the video), then the audio "dumb"(barre de son dit qu'il n'y a son sort) but nothng can be heard. "." I solved this problem simply by setting the volume level 0 and back where it was in the first place.

    This problem came a bit annoying on a long term, so I hope someone can help me with this problem

    Thanks already

    Problemaster

    Thank you

    Your system uses the older driver

    Your driver page

    For the audio problem uninstall it please the driver Audio Realtek High definition (HD)

    Reset

    Install the new after reboot

    Driver Audio from Realtek High definition (HD) new

    FTP://g4u0180.Houston.HP.com/FTP4/pub/SoftPaq/sp72001-72500/sp72229.exe

    After the update install the new Bios (please disable the internetsecurity for installation of the Bios)

  • 8 slate Pro audio problem: headphone output

    Hello

    I bought my slate 8 Pro (model 7600US) to replace my Blackberry playbook. It is the great Tablet (screen perfect last Tegra 4 CPU, battery in good condition, good speakers integrated), but after the use of the Tablet for several days, I am surprised by problems with audio quality of the headphone output. I use mainly compressed with headphones (audio books, Netflix, music, etc.), so when I connected my Ultimate Ears Super.Fi 5 Pro (headphones ultra-sensitive 119db/mW, 12 Ohm), I got very sensitive background noise, artifacts and, what is very annoying - variable pitch tones when changing tone based on the activity of the Wi - fi and load CPU, especially on low volume levels.

    So I tried using headphones from Shure (109db, 29 ohms), less sensitive 4ca as KOSS KTXPRO (106db, 60 ohms) with the same results. HP Slate 8 Pro is not powerful enough to Sennheizer 555 (105db, 120 ohms) but I also had the artifacts and noise of not. Finally I tried junk headset $2 and found the sound sounds and tones perfectly acceptable ground level, but the sound quality with these phones is terrible.

    To compare, I tried all my headphones with Nexus 7, Samsung Note 3, IPhone 5 and Playbook without problem.

    I have returned the shelf at the store and replaced it for the new, but I had similar problem.

    Please let know us, what I have to try the third time and replace the Tablet, or it's problem of hardware design, which cannot be resolved. Is it possible, that developers of HP can fix it in software configuration in a future update?

    I understand, this tablet is not an audiophile device, but when the HP Web site indicates to this tablet: "Tuned by Dr. Dre himself, Beats Audio™ allows you to hear the music the way the artist intended.", it must at least provide acceptable audio quality for most listeners. I love HP Tablet a little, but if audio problem cannot be solved, I have to look for another option like Samsung or LG.

    Updated my slate 8 Pro to KitKat 4.4.2 and looks, that his problem slipped.  With this update, noise and less noticeable artifacts, sound quality is acceptable now, even for sensitive headphones.

  • Re: Win7 x 230 2306CTO audio problems

    Hello, I give you your comments about this audio one speaks in this discussion forum.  I have a 230 x that keeps audio problems.  The audio buttons stop working, or if the buttons work, no sound of the laptop without going into Device Manager and remove the RealTek audio driver and then let Win XP find him.  It seems that the questions is not operating system specific and I saw also that mobile phones sent to Lenovo have the system board and speakers replaced, however it is not the problem.  I also see that by reimage the laptop, it does not solve the problem either.  Details of the machine are below:

    Hi all

    After discussing this with our lawyers customer teams seems that this issues has been solved by a unistaaltion of the current drivers and reinstall the drivers from our support site. Additional updates to the audio application and communication had found to remedy the problems. For the moment I will be this post as solved and the resolution. We will continue to follow this thread and should further problems arise us will gladly be this stand out like the resolution and sought to fina of new resolution that best fits.

    I hope this helps.

    Concerning

  • After extraction of CD all the music files are renamed

    Original title: Rename music files

    After the extraction of a cd of music on my computer, all tracks appear as "1'"track 2"etc., and the album is"unknown album ". I modified manually the album title and the titles of the tracks, but as soon as I RIP another cd, the album and titles I just renamed are once more are listed as '1' etc., and they are moved to the new folder of the CD-ROM. Y there a way I can rename them, and "lock" in place? Thank you.

    Method 2:

    You can try to rebuild the media player library, and then try to extract again

    This problem can occur if the media library is corrupt. Rebuild the library and check if this solves the problem.

    Usually, also, had to stop the WMP network sharing Service before you rebuild the library. Click Start, type services.msc in the search field and press ENTER. In Services, locate the Windows Media Player Network Sharing Service . If its status is started , double-click the service, and then click stop . Tim Baets
    http://www.BM-productions.TK

  • Low audio problem Windows 7

    Hello

    This is my first time to a post here, so I'll get to the point.

    So, recently, I just had a virus on my laptop, everything is resolved except my audio problem.

    I had to go into "Safe Mode" while the virus was LURKING in my laptop, I had deleted some unwanted files

    It comes from the virus.

    ACCIDENTALLY, I deleted half of what was in my "common files" folder witch was located in:

    C:\Program Files\Common Files

    I have still a few other folders inside this folder... I used to have a lot, and I think that some of them were important.

    Only after that when I rebooted my computer, I realized that my audio seemed low. (My volume was 16% and it is always

    the volume loud enough and perfect for me).

    Also, YES, I tried the troubleshooting method everyone does, and it is always at low volume.

    It does not solve the problem. The same day, I caught the virus, it was withdrawn after a few hours, so all is well.

    Well, there you go, that's my problem. Please any help would be appreciated!

    Hello

    Thanks for the reply.

    In this case, I would say that you want to run system restore to recover all the files. After that, if you have any problem of virus.

    Let us know we will certainly help you.

    Refer to:

    http://Windows.Microsoft.com/en-in/Windows/system-restore-FAQ#1TC=Windows-7

    Note:

    When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

    I hope this helps.

    Kind regards
    Anusha

  • Ever since I started to update to 34.0.5 I have known many audio problems.

    Since Firefox updated to 34.0.5, I have known many video and audio problems. At first, I couldn't play the videos at all, but install Shockwave Flash, which sets. All my videos play in silence. I've updated my plugins (Quicktime and VLC were the only ones to ask for an update) should not have solved the problem because I do not believe that I was actually using these plugins at the time, but nevertheless, it seems to have worked. Now I can play videos with sound, but the quality of this noise is severely reduced and even sometimes staticky. What gives?

    These are the same products - 'adobe flash player' is the consumer in the face of term "shockwave flash" the technical name...

  • Audio problem when using an HDMI cable

    I have a 2000 HP and from time to time when I connect my comp. to cable HDMI the sound only works on the computer

    not the TV and then I have problems with the sound when you play videos on the computer alone or with headphones. I have also

    getting a Web page saying that something is null and then says error message line 1530 and I have to restart for

    Let the error message.  I checked all of the updates for audio.

    Thank you for visiting the Forums HP's Support and welcome. I have read your thread on your laptop HP 2000 and don't read does not correctly when it is attached to the TV. Only, you should be able to have the HDMI cable from the computer to your TV and try to touch the key FN and F4 for transferring the image of the computer to the TV while the HDMI cable is connected. Here's a document on solving audio problems with external speakers, headphone and HDMI audio devices.

    I hope this helps.

    Thank you

  • Audio problems

    Hi, I have audio problems! I downloaded Skype on my windows laptop 10, and I have audio problems with only my Skype. I checked the audio setting on my laptop and they are very well, I tried to save regularly, and it was perfectly good. I checked the audio on my Skype, they seem to be well, but does not record the microphone. When I talk about the green line of volume is not hear me, and move. However I tried to snap my fingers just above the mic, and if I did it really hard two or three times the volume of the green line would move just really slowly, however when I spoke into the microphone it is not. I deleted and downloaded again, but has not fixed the problem and I don't know what to do. None of the parameters have changed, but when I checked my setting of the laptop, Skype was not one of the apps listed as the microphone (and I don't know how to change.) In fact, when I checked all my settings of the computer, Skype did not appear for the use of microphone, speakers or camera (but I get only problems with the audio.) Please get back to me as soon as possible to help with suggestions! I use Skype to talk to family and work, but also to stay in touch with teachers and take classes.

    Please, run the diagnostic tool (32 bit) DirectX. Run dxdiag.exe (Start - Run or Win + R key), then press on enter or click 'OK '. Once the diagnosis is complete, "save all information...". "in a text file. Please attach this file to your message.

  • Audio problem with Windows 7

    Hello

    I have successfully upgraded from Vista to Windows 7 and I'm very happy with him... except. Audio glitches!
    With Vista, I have not had any audio problems but now with Windows 7 I. With the help of the dpc latency checker, I disabled all the drivers I could disable but no result.
    Can someone help me please?

    Hello

    What model of laptop do you have exactly?
    Have you installed Win7 its the most recent driver for your laptop model?

  • Incompatible Audio volume T420 - Audio problem.

    Hi all

    recently I've been an audio problem with my T420. It doesn't matter if I use the built-in speakers or an external playback via the audio device, audio volume goes up and down several times for a minute.

    It's rather annoying and irritating. I use the standard driver provided by Lenovo and with stock settings.

    If someone had this problem and could give me some advice?

    Thank you very much!

    The framework was already to the people with reduced mobility.

    I thought, maybe that's the problem, I've been experience, because it is only when I used Ethernet instead of WiFi: DPC latency + audio / mouse skip and stutter on t420--Lenovo's community

    I tried the proposed parameters, without success.

    Interestingly, re - install the same drivers that have been installed previously seems to have solved the problem.

    Maybe some settings or installation screwed up.

Maybe you are looking for

  • Drivers for HP 15-AC026TX

    Please suggest to get after driver for HP 15 - AC026TX -PCI of Acquisition of data and signal processing controller SM Bus controller- -Unknown device (same disply in 3rd?) Thank you.

  • is it better to use functions instead of objects? things get very complicated

    My App is trying to apply the method of Muller. I have about six classes. It appears to be too complicated to cope. Should I go back to the use of functions? (maybe two classes). I have to start over.

  • The analysis appears when I turn on my computer and it won't go away.

    If I hit Cancel I get error 1706. I have had this problem since I had to uninstall Roxio Creater 2009. No idea how I can get rid of the box Scan? In fact, I have two boxes to scan at the time.  One of them says: "the component you are trying to use i

  • Can not send emails

    I added an account to my windows mail, but it won't work. under incoming mail, I added: imap.aim.com under outgoing mail, I added: smtp.aim.com AOL is tell me in their instructions to change "the port 587" and maybe that's the problem since I have no

  • LabelField click navigation

    Hello world: I am trying to create a dynamic menu helps in my application.  What I'd really like is some type of display HTML in my application, but appears not to be possible without writing a rendering HTML class.  So instead, what I'm doing is add