Area connection icon gone: no Internet connectivity

Similar Questions

• ICON for Local Area Connection ICON shows a sign of DEADLOCK.

  Hi all

  Internet works. It's the connection to the local network. But no ICON for Local Area Connection ICON shows a sign of DEADLOCK. There is no Internet connection ICON in "network connections". I want to display ICONS in the systray. If I try to do that then found that "Local network connection properties" are empty. Tried to install a Protocol and received the following message is displayed.

  you must install and enable at least one protocol for this connection.do you want to select.

  Yes,

  Install

  Customer
  Service
  Protocol
  > Protocol
  It cannot add the required component. The error is:
  The system cannot find the specified file.
  -----------------------

  Hi MohammadYar,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  See the Microsoft article and check if that helps.

  How to troubleshoot missing network connections icons in Windows Server 2003 and Windows XP

  http://support.Microsoft.com/kb/825826

• Network icon shows no internet access, even if I am connected to the Internet

  I have a dell inspiron 15 r 5521 with windows 8 os (c) Microsoft Corporation 2012.

  In our college after joining the network local network we must go to the website of the computer center and connect through his id and password. After that only we have access to the internet. But even after access the internet icon shows without internet access. I can't use my apps windows for this reason. In the windows of another 8.1, it shows internet access.

  Hi Naman,

  1. Do you have an error message when you try to connect to the Internet?
  2. Are you able to connect to other networks?
  3. Did you recent hardware or changes to the software to the computer before the show?

  I suggest you contact the administrator of system network College if the problem only occurs when you try to connect to the College network.

  You can also publish the application on the TechNet forums if the computer is connected to the domain.

  http://social.technet.Microsoft.com/forums/en-us/category/w8itpro

  You can refer to the suggestion that I have provided from the link next if you are unable to connect to any network.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-networking/unable-to-connect-to-Internet-in-Windows-8/675d0f63-DCC1-436C-b49a-9863c22caa4c

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• Internet goes when you are connected to wifi

  Bought an iMac on eBay this week, works fine apart from a problem I encounter with internet stall, which really starts to get boring!

  It's an iMac, mid-2011, with OS X el Capitan 10.11.3 installed and put to update to the most recent update.

  The question...

  When you are connected to our home network (Sky Broadband) I get internet access for 5 minutes for an hour then stop him internet but the wifi is connected. At this point if I check all other computers/phones/tablets on the network that they are all still connected to the internet with absolutely no problem.

  The temporary solution...

  If I disable the wifi on my iMac and then back on again once it reconnects immediately and internet works fine still a time - until it stops!

  What I tried...

  Restart the mac repeatedly

  Restarted the router again

  In network settings, advanced on the mac, I renewed the DHCP lease (loads of times - note it always seems to come back with exactly the same ip address - I guess it's good?), updated the DNS (last post I read said to use 2.4.4.2 so am currently on that), tried to manually set the MTU to 1453, I deleted all the other networks stored outside my home network Too much.

  Does anyone have any suggestions please for all messages that have worked for them, or things that I could try?

  Thanks a lot for your help

  Joe

  Did you erase the internal drive and install OS X yourself? Did you run the hardware test? If this isn't the case, please do both.

• Whenever I try to open my hotmail calendar this message: there is a problem connecting to Hotmail calendar now. Please make sure that you are connected to the Internet and try again.

  Hotmail calendar error

  Whenever I try to open my hotmail calendar this message appears

  connection error

  There is a problem connecting to Hotmail calendar now. Please make sure that you are connected to the Internet and try again.

  For sure, I understand what his average, but it's weird because when I open it, I'll be online.

  Thank you for visiting the Microsoft Answers site.

   
  The question you have posted is related to Windows Live Hotmail and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:
   
  http://windowslivehelp.com/product.aspx?ProductID=1

• the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I am disconnected and then reconnected___

  the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I disconnected and then reconnected.

  I just ran windows update on a large number of files all successful before this happened, it happens when I am connected to the internet, I use dial-up access

  added on 25/11/09 still have the problem mentioned above, even explore two windows are runnibg on the system, or two IE browsers running?

  Added 27/11/09 I ave followed all instructions up to and including thefix tool kb/93623, stiil I have this report of windows Defender quickly appearing twice in a row, then I'm disconnected from the internet. any more ideas thanks sam

  Visit this link:
  http://support.Microsoft.com/kb/936213

• We cannot connect to Hotmail right now. Please make sure that you are connected to the Internet and try again in xp

  every time when it is open to the top IE 8 in what concerns some page open then always comes error problems... We cannot connect to Hotmail right now. Please make sure that you are connected to the internet and try again?

  my internet still works fine and no problem, but it the site themselves.

  You will find support for Windows Live Hotmail in these forums: http://windowslivehelp.com/forums.aspx?productid=1

• No local area connection icon

  I installed windows vista, I don't have my local connection icon, what I can do?

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  How to enable or disable the Notification area system icons in Vista

  See you soon.

  Mick Murphy - Microsoft partner

• WLAN speed when you are connected to the internet

  I use WRT54G2 V1 Wireless Router. My firmware version is 1.0.04)is.

  I connect to the internet via ADSL.

  Both computers are connected to the router, we have a connection cable, other is connected wireless.

  If I'm not connected to the internet, I can transfer files between them through 1.5MB/s-2MB/s. But, if I'm connected to the internet, the speed drops to 100 KB/s - 200 KB/s. My adsl connection has a bandwidth of 1 Mbps (about 128 KB/s).

  Has anyone faced similar problem? No idea what to do?

  You said that you receive the Internet wireless at 100-200 Kbps (kilobytes per second), but I guess you're saying 100 to 200 Kbps (kilobits per second).  If you actually get 100 to 200 Kbps, so it is faster than your reported 1 Mbps line speed.

  A wireless connection is more important than a wired connection.  If most users, when connected wireless, get only about 50% to 70% of their wire speed.  So I'm expecting a 1 Mbit/s connected to the Internet, you should be able to get 500 to 700 kbps (kilobits per second) = approximately 50 to 70 Kbps (kilobytes per second) when connected wireless.

  When you file transfer from computer to computer on your local network, your speed is limited by 54 Mbps Wireless g your connection speed, which can provide a data rate up to 20 to 25 Mbit/s.  It is clearly much faster that your 1 Mbit/s to the Internet can provide data.  So that explains why the transfer of files on your local network is much faster than your wireless Internet connection.

  So, the only real problem I see is that your speed of your WAN (Internet) port to the wireless local area network computer seems to be slow.  The most common cause of this problem, is the default to reset the router by default after a firmware update.

  If you did not reset to the factory settings since the last update of the firmware, please do it now and see if it solves your problem.  After the reset, you must configure the router again from scratch.  If you have saved a router configuration file, DO NOT use it.

  To reset your router by default, follow these steps:

  (1) turn off all computers, the router and the modem and disconnect from the wall.
  (2) disconnect all the wires of the router.
  (3) turn on the router and let it start up completely (1-2 minutes).
  (4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
  (5) turn the router.
  (6) connect a computer cable to port 1 of the router (NOT to the internet port).
  (7) turn on the router and let it start up completely (1-2 minutes).
  (8) the power of the computer (if the computer has a wireless card, make sure it's off).
  (9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
  (10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Leave the user name blank and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen). Exit your browser.

  If you get this day without problem, try the Setup disk (or configure the router manually, if you prefer) and see if you can get your work and router configuration.

  If you can not ' response to... ". "in step 9 above, your router is probably dead. A report with this problem

  If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. Related to this issue.

  If you need additional assistance, please indicate your ISP, the make and model of your modem, the firmware version of your router and the results of steps 9 and 10. In addition, if you receive error messages, copy them exactly, and report.

  Please let me know how things turn out for you.

• BB link 1.1.1.26 software BlackBerry cannot connect to your BlackBerry ID confirm you are connected to the Internet and try again.

  I'm having a problem with BlackBerry link 1.1.1.26.  I installed, removed and reinstalled several times and have not been able to find a solution.  Once the link is installed and I have running, click on the "Sign In" button and then showed up with an error message saying "unable to connect to your BlackBerry ID."  Confirm you are connected to the Internet and try again "(Win 8 64-bit) office is certainly connected to the internet, using for this post as we speak.  Configuration of simple network DSL modem, router and wi - fi, no firewall company or related issues.  I tried to disable the firewall, and windows defender, reboot and nothing seems to work.  Once I had it connect after a new installation, but the next time I loaded, he was presented with the same error.  Does anyone have any ideas or patches?  Get very frustrating and want out of the file sharing facility.

  Thanks a lot for your help!

  Rick

  I was able to get the link to work yesterday by doing a complete uninstall of the BB and BB Desktop Manager link.  Restart, running a registry cleaner, by restarting again and do a new installation of link BB.  It now seems to work.  I tried a few times and after several reboots it always seems to work.

  Yes, I had checked before the windows firewall State, and there has been exceptions for active link.  I also tried turning off the firewall completely and windows defender, but which had not worked.

• How to know which programs are connecting to the internet?

  Hello

  How to know which programs or files are connected to the internet, including files and programs Microsoft?

  Thanks and greetings

  In Windows 7, use Ctrl + Shift + Esc instead of Ctrl + Alt + Delete. It lets you in the Manager of tasks more quickly. Select the performance tab, click the resource monitor and Network tab.  Network connections are included.

• Bulletstorm on W7 error""we must check the release date of your game, make sure that you are connected to the internet"on pressing ENTER.

  Original title: Bulletstorm on W7

  Hi, I installed Bulletstorm for my grandson on w7, on the start-up of the prog. It comes up with a "we need to check the release date of your game, make sure that you are connected to the internet" on pressing enter, he says: I am not connected to the net and unable to connect to live, even if that window is open!

  XM

  Given that Bulletstorm is not a product of MS, I suggest you cont EA (the developer) for assistance

  http://www.EA.com/Bulletstorm

• The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available.

  The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available. What could be the problem and how can I solve it?

  A problem better put to the support of Tosh or their forums, with regard to their equipment, not MS or Win

• my widget browser continues to feed widget showing 'failed' and keeps saying ' failure widget feed and be sure that you are connected to the internet "when I'm connected to the internet. How can I fix it?

  my widget browser continues to feed widget showing 'failed' and keeps saying ' failure widget feed and be sure that you are connected to the internet "when I'm connected to the internet. How can I fix it?

  Widget Browser disappeared.  Adobe pulled the plug on this subject quite earlier.

  See that this related discussion from earlier today.

  Widgets a go go

  Nancy O.

• This could be the cause I have to continually reset the network adapter named local area connection?

  Hello

  I think I have to click on the network icon in the taskbar at the bottom right of the computer. To connect to the Internet, I have to reset the network adapter named "Local Area Connection" every time.  The computer can be idle for 30 minutes or more, and the adapter needs to be reset.  I have road runner cable internet and the operating system Windows Vista HP computer n about 3 years.  Have no idea?

  Thank you all for your help.

  Ryan

  Try this: configuration panel, Device Manager, expand network adapters

  Double-click your adapter LAKE, the power management tab

  Uncheck the box;   Allow the computer to turn off this device to save power, OK