Area of user account control to put the password will not appear

Similar Questions

• When you try to use the repair your computer from the advanced boot option option, it only shows a different user account and my username and password does not work

  Original title: when you try to use the repair your computer from the advanced boot option option

  When you try to use the repair your computer from the menu option options advanced startup, when it comes to the screen to select the user account it shows only a "another" user account and my username and password does not work, and the 'OTHER' this account is not on my list of user accounts... what should I do?

  Hi kennympeek,

  1. why you try to do the Startup Repair?

  You can try to perform the commissioning of repair using the audit and the disk Installation of Windows Vista.

  For estelle information links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope this information is useful.

• According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the section 'printers and faxes '.

  You have a printer again, with installation CD. According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the "printers and faxes" section in Control Panel. Model of printer - Epson XP-200.  Have a Dell, Windows XP.  Help!  Not even sure who to ask...

  What version of XP (Home, Pro, Media Center) and service pack (none, 1, 2, 3)?

  Printers and faxes is totally blank?

  Open a command prompt window (start > run > cmd > OK)
  Type the following in the black command prompt window and press enter
  spooler request SC

  You should see something like this:
  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

  What is the 'State' displayed for you?

  Open the Services applet (start > run > services.msc > OK) and scroll down to "print spooler".  The status should be started and the Startup Type should be automatic.  What are the parameters of your correspondents?  If your print spooler is stopped, you can try to launch it by clicking on the link, but I suspect that it stops again.  Please report the results of your efforts.

• When I try to send an e-mail with attached pictures, I am told that the photos will not appear in the e-mail message.

  When I try to send an e-mail with pictures, a pop-up window appears when I hit SEND and says that the photos will not appear in the e-mail message.  How can I fix it?

  original title: e-mail problems.

  Hello

  I suggest that ask you your question on the following link.

  http://answers.Microsoft.com/en-us/windowslive

• How to force the display of user account control to run the scheduled task

  I have User Account Control setting on notify me when a program wants to make changes to my computer (the recommended setting).

  I created a scheduled task: create a restore point, using a software called Quick Restore Maker. User accounts in the program control screen comes up and stays on, ends by closes but ends the program. As I'm not at the computer when running task, I can't cancel the screen. The display ends by disappears, but the program itself does not run.

  So the question is: How can I force screen UAC a program to run without changing the UAC universal computer settings that would allow any program to change my computer without any intervention from me?

  Thanks for your help.

  There is no way around the need for approval of Admin indicated by the parameter of the UAC.

  Reduce the level of UAC would be the only thing you can try, but I understand that this would not be a safe way to proceed for normal operation.

• Why do some executable programs require Windows Vista user account control to start, while others do not?

  For example, Iobit Advanced System Care 6 requires user account control to start, while none of the programs Microsoft Office requires user account control to start, but they are all executables (*.exe).  Why?

  EXE files may have a small text file embedded in them that controls this behavior (and other). A file called programname.manifest in the same folder can do it too, but one stand-alone exe substitute manifests (vista and later).

  Here is one that requires the Admin run and also uses 6 worm of the common controls.

  
  
  <>
  version = "1.0.0.0".
  "" processorArchitecture = "*".
  name = "DFT".
  Type = "win32".
  />
  Unicode text editor
  
     
          <>
  Type = "win32".
  name = "Microsoft.Windows.Common - controls.
  version = "6.0.0.0.
  "" processorArchitecture = "*".
  publicKeyToken = "6595b64144ccf1df."
  "" Language = "*".
  />
     
  
  
     
         
              <>
  Level = "requireAdministrator".
  uiAccess = "false".
  />
         
     
  
  

• Issue user account controls? message "resource loader cache not have loaded MUI entry" you try to run Norton System works on cd with UAC.

  I am running vista Home premium, upgraded from xp. I can't run norton system works setup cd with controls (UAC) user account enabled and on. I get the message "resource loader cache has no load MUI entry" I can run from cd with disabled UAC and offshore. What should I do to fix this?

  Hi David e. Sunderland

  Method 1
  When you are working on your computer and install a new program, the installation suddenly fails. Now, you're left with a partly installed program. You try to install the program again, but you're unsuccessful. Or, maybe you have problems trying to remove an old program because the installation files are damaged.

  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651/

  Method 2
  You can try to install the program to boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

  Method 3
  Run the Norton System Works as an administrator and check if it helps

  How to enable an application to run once with a full administrator access token in the UAC?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-allow-an-application-to-run-once-with-a-full-administrator-access-token-in-UAC

• I locked myself in one of my user accounts - I have reset the password and can not remember what it is

  URGENT! -I'm locked in one of my user accounts - the system won't let me not reset the password

  You said that you had to reset the password, but forget what it is.
  Do you then remember the previous password?
  1. If you remember the previous password until you did reset.
  2. If you have the DVD drive or Vista repair.
  3. If there is a restore point which a logon succeeded.
  This works in cases where you changed your password to something new and then has forgotten or deleted a user account by accident. So that this works, there must be a restore point from the system during which logging has managed for the account of the problem. In addition, this isn't a problem if you are in a domain environment because the domain administrator can always reset your password.

  If you meet the above conditions, then use this tutorial:
  http://www.howtogeek.com/HOWTO/Windows-Vista/how-to-regain-access-to-your-administrator-account-in-Windows-Vista-using-system-restore/

  Otherwise, we are not allowed to help users to bypass the password protection, regardless of what are "reasons".
  Here's the Microsoft Policy on this subject
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/3eba3150-8742-4264-be9f-0daaad2282cd

• CRNT FF: 1 of 5 emails lost all my messages on viewing but shows the amount of mails are there. Search can find them all, just will not appear in the Inbox

  1 of 5 email ACCOUNTS receive mail OK, but as soon as you leave this account and that you come back, nothing appears in the Inbox. The status bar shows however, that there are 32 emails it even if the Inbox is devoid of any text.

    Using Search, I can find ALL 32 emails by searching for a word in the subject field or the body fields. The mails ARE there!  They just do not display in the Inbox.
  

  Then... How the hell can I get the Inbox to display its content again?

  It worked until the day before yesterday when I read an e-mail from a reliable source and it automatically disappeared, along with all others in the Inbox. All other accounts are working very well.

     I tried creating a new email account but it wouldn't let me, giving me an error that the "incoming already exists".  No number or anything; it come when I click DONE in the creation process.  The new account will not write to the disk.
  

  I ran NOrton, AVG, MalWare Bytes, Windows Defender, Spybot AV and the other that I forgot the name of that time. ALL showed nothing found after each live scan success. I'm reasonable sure, I have no malicious software.

  Emails from this account are quite important, and I don't want to lose them if possible; they are for a Committee planning the 50th high-school reunion.

  Windows 7 HP, Dell XPS L702, 6 Gig of RAM, Intel i7 processor and lots of disk space. I've also compacted without change. The messages are all still there, but nothing shows in my Inbox; It is empty. I only see them using Find Messages from words I know are in them.

    Happy to provide any other info needed to evaluate this.  Oh, the account Sends OK too; it's a POP3 account setup.
  

  Any help would be most appreciated!

  Twayne'

  In main menu, make sure that you have seen (Alt - V) - topics - all.

• the user removed windows xp, now the computer will not boot

  I have deleted 1 of 3 users on XP Pro.  The program allowed me to save the contents to a folder on the desktop, I did.  I checked the desktop, all data file and pix were there. Then I rebooted.  Open my user account.  All icons were present, but empty, no program.  Go to START - programs, all programs present but empty.  Could not run any program.  I restarted again, and after the Dell startup screen, the screen is black.  Cannot start in safe mode, will not open windows.  I have an XP Reinstall disk but not a recovery disk.

  Hello

  You can follow the steps from the link and check if it helps: computer stops responding with a black screen when you start Windows XP: http://support.microsoft.com/kb/314503

• The icons will not appear on some pages.

  Icons on pages like Yahoo will not be displayed, and only the squares are displayed.

  Type of topic: preferences #content< enter > in the address bar.
  In front of the fonts and colors, press the Advanced button.
  On the bottom, turn on allow the Web Sites to pick their own.

  You can check policies corrupt and duplicate and other police issues:
  http://www.thexlab.com/faqs/multipleappsquit.html - help book 2.0 fonts: looking for damaged fonts
  http://www.CreativeTechs.com/IQ/garbled_fonts_troubleshooting_guide.html

• Comptuer doesn't recognize the password, will not open Windows XP

  Recently spent a computer on the network to use domestic and now it does not recognize my password. Deleted some files network but on sign-in, it says that the server does not recognize the password. Cannot go beyond the login screen and it offers no option to bypass. Is there a way to get around this? Tried to start SafeMode but get the same login screen. Maybe I deleted some files network changing for a House count. (the unit is 6 years old). Help.

  He was part of a network that no longer exists. Could open XP by using a different password, but the original no longer works. Am trying to have deleted all of the network files.

  Thank you

• Overview of the image will not appear

  Product name: HP Pavilion dv6 Notebook PC

  My photo icons do not display the preview of the image. They all resemble the default image for the program that opens to them. All the photos on my desktop and folders are like that and when I get pictures of my cameras it get frustrating to attempt to distinguish each one of them.

  Display options do not work and neither does change icon size or default opening of the program. In fact Let's say an image opens with paint, the default image is a yellow and a red flower. When I change the default program for the Photo Viewer icon does not change to the small landscape for Photo Viewer icon.

  Hello

  Here's something to check.

  Open windows control panel, open Folder Options and click the view tab.  Check that there is not a check mark in the check box "show icons, never thumbnails", if there is, click the box to remove the tick and then click on apply then Ok to save the change.

  Kind regards

  DP - K

• Financial Reporting Studio - added attributes to the Page will not appear in the workspace

  I tweaked an existing report by adding 2 attributes to the grid and assigning "Point of view of the user" for both of them.  When I go to the workspace Explorer to try running, however, the two new attributes are not listed, so it is impossible for the user to select the.  I tried deleting the POV, thinking that would like to start the selection process, but the two new attributes are still not visible.  Any ideas?

  Hello

  Yes, I can imagine your problem now. I hope that Dev has refused it because it is not really a bug (feature works do not), and that soon we will see like features designed into the product.

  At least we know it.

  Thanks for posting the message.

  You could close the question please.

  Kind regards

  Philippe

• The extensions will not appear in the add-on Manager; Error of Java to start Firefox

  When I click on tools-> addons, modules Manager opens but no show extension in the "Extensions" tab.

  I think that the problem is related to a start-up error message I receive. Whenever I open Firefox, an error message titled '[JavaScript Application]' opens and displays the following text:

  aObj is undefined - chooseValue ((Sub 0),"name")@resource:///modules/XPIProvider.jsm:7032
  @resource:///modules/XPIProvider.jsm:7142)
  @resource://yoono/yoonoLog.js ([object Object]): 95
  @resource://yoono/yoonoLog.js ([object Object]): 49
  (@chrome://yoono/content/yoonoOverlay.js): 176
  (@chrome://yoono/content/yoonoOverlay.js): 88
  @resource://yoono/yoonoService.js ([object Array]): 949
  safeCall ((function (aAddonList) {try {for (var i = 0; I < aAddonList.length; i ++) {_self.addOns [aAddonList [i] user.user] = aAddonList [i]; if (YOONO_ID == aAddonList [i] user.user) {_self.setExtensionVersion (aAddonList [i] .version) catch ;}}}}}})) (e) {CONSOLESERVICE.logStringMessage (e) (;} aCallBack () ;}), [object Array]) @resource://gre/modules/AddonManager.jsm: 50}
  @resource://gre/modules/AddonManager.jsm ([object Object]): 964
  AOC_callNext() @resource://gre/modules/AddonManager.jsm: 120
  @resource://gre/modules/AddonManager.jsm ([object Array]): 959
  PL_getAddonsByTypes (null,(function (aProviderAddons) {'use strict'; addons = addons.concat (aProviderAddons); aCaller.callNext () ;})) @resource:///modules/PluginProvider.jsm:110}))
  callProvider ([object Object], "getAddonsByTypes", null, null,(function (aProviderAddons) {'use strict'; addons = addons.concat (aProviderAddons); aCaller.callNext () ;})) @resource://gre/modules/AddonManager.jsm: 78}))
  ([object Object], [object Object]) @resource://gre/modules/AddonManager.jsm: 957
  AOC_callNext() @resource://gre/modules/AddonManager.jsm: 126
  @resource://gre/modules/AddonManager.jsm ([object Array]): 959
  ([object Array])@resource:///modules/XPIProvider.jsm:3094
  completeAddon ([object Object])@resource:///modules/XPIProvider.jsm:3895
  getAddon ([object Object]) @resource://gre/modules/AddonRepository.jsm: 504
  ("[email protected]", completeAddon) @resource://gre/modules/AddonRepository.jsm: 536
  ([object Object])@resource:///modules/XPIProvider.jsm:3899
  ((function (aAddon) {use "strict";
  function completeAddon (aRepositoryAddon) {aAddon._repositoryAddon = aRepositoryAddon; self.addons.push (aAddon); if (self.complete & & self.addons.length == self.count) {self.callback (self.addons) ;}}}

  If ("getCachedAddonByID" in AddonRepository) {AddonRepository.getCachedAddonByID (aAddon.id, completeAddon) ;} else {completeAddon (null) ;}}), 0, [object Array])@resource:///modules/XPIProvider.jsm:4796}}
  (0)@resource:///modules/XPIProvider.jsm:4795

  Any help would be appreciated.

  -Jason

  I had the same problem.
  (1) to fix it, you can check what addon is responsible for this mistake by viewing the extensions.log file in you profile file (lines).
  (2) access to the extensions of subfolder in your profile folder and delete appropriate addon xpi file or folder addon if it is not packed in xpi file.

  But ideally Firefox should protect Manager addon is better error in Addons (same addon disabled may cause this error).