Areas of VCS between control/Highway

Similar Questions

• Limit the number of calls between areas of VCS/subareas?

  Hello

  I wonder if there is a way that we can limit the number of calls between two subareas, areas or VCS.

  The script as below:

  VCS-E (owncompany) < -----neighbor/traversal/dns="" zone="" over="" internet------=""> > VCS-E (partner)

  My intention is to limit to 5 video calls from VCS-E (partner) so that the 6th call (dial in endpoint) will be blocked.

  I know that we can control the total bandwidth between areas using links & pipes but that does not stop the remote end to lower their rate of recall and deal with several endpoints.

  Thank you.

  Hi Hafiz,

  have you tried to disable the 'downspeed by mode of appeal"in a configuration of Bandwidth?

  try disabling the "downspeed" by call OFF mode under VCS config-. > bandwidth--> configuration.

  This will not allow the calls get the downspeed but it must block because of insufficient bandwidth.

  Thank you

  Alok

• What are the differences between TNT5002 and TNT5004

  Hello

  I am the design of an interface card that will include two controllers GPIB (TNT5002) who will work on PCIe via PEX8112 (PCIe to PCI bridge) and have several questions on the forum:

  1. I use TNT5004 on their advice, but only offer tnt5002 purchase, what are the differences between them?
  2. Are there other relevant chips best suited to implement PCIe two interface GPIB?

  Danny

  The technical reference manual can be found here:

  http://www.NI.com/PDF/manuals/370595b.PDF

  I wasn't able to find reference material for this chip models. If there is, it's probably only for the GPIB to PCI.

• Create a diagonal matrix whose elements are determined by a control

  Hello

  How can I create a diagonal matrix whose diagonal elements are determined by a control?

  As [lamda lamda 0; 0]

  Thanks in advance.

  Chuan

  You can use just multiply according

  

• What are the differences between the services and site domain group policy and group policy?

  What are the differences between the services and site domain group policy and group policy?

  Server must wonder about the Technet site.  http://social.technet.Microsoft.com/forums/en-us/home

• HOW smart card smart card slots look like? What are the differences between smart card slots and cards express?

  HOW smart card smart card slots look like? What are the differences between smart card slots and cards express?

  Hi Smitty,

  Yes, so ExpressCard is an interface that has a USB port to this topic where I can plug in external devices to be attached to my computer right? I did a search on google but could not find photo Card Slot smart. I need a picture to get an idea of how look like a smart card Slot.

  Next time try BING...

  http://tinyurl.com/95rgwxw
  http://tinyurl.com/9plc7zt

  http://tinyurl.com/8h96qsr

  Scroll to the left view (image 5)

  http://support.Dell.com/support/eDOCS/systems/latd610/en/ug_en/about.htm

• some files are missing (like network, Control Panel, systems, windows components) under administrative group policy template kindly help me on this

  some files are missing (like network, Control Panel, systems, windows components) under administrative group policy template kindly help me on this

  In the Group Policy Editor, right-click on administrative templates, add/remove templates.

  Usually, you would see:

  CONF
  Inetres
  System
  Wmplayer
  sooper

  If some are missing, add them as follows:

  Click Add and it will open a folder where you can add the missing elements to match the list back in, or to match the list on a system that works correctly.

  Restart to make sure that the changes stick.

  Each component has a history, you can Google for more information.

  Here is a good starting point:

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;816662

• Are there differences between Windows 7 OEM and the commercial full version?

  Are there differences between Windows 7 OEM and the commercial full version?

  Commercial versions include two disks installing 32 and 64 bits and can be moved to new systems.

  OEM versions are either 32 or 64-bit - only installation disc is included - and cannot be moved to a new system.

• What are the differences between RT and Win 8 Pro?

  RT

  What are the differences between RT and Win 8 Pro?

  Windows 8 - this runs on processors traditional x 86 - x 64 for Intel and AMD, and the same apps that runs on Windows 7, Vista, and Windows XP.

  Windows RT - built on the same basis as Windows 8, it works on a different processor called ARM and not running programs in Windows 7, Vista, or Windows XP. In addition, it comes with Microsoft Office 2013 while Windows 8 does not work. It only comes on the new devices, in contrast to Windows 8 you can buy a license for an existing computer.

• What are the differences between pga memory max session and pga session in memory?

  Hi all

  What are the differences between pga memory max session and pga session in memory?

  SELECT s.sid, n.name, s.value FROM v$ sesstat s, v$ statname n

  WHERE s.statistic # = n.statistic #.

  AND n.name = 'pga session in memory. "

  SELECT s.sid, n.name, s.value FROM v$ sesstat s, v$ statname n

  WHERE s.statistic # = n.statistic #.

  AND n.name = 'pga memory max session ";

  
  

  
  

  Note that I have read the documentation. However, it is not clearly explained.

  
  

  Thank you
  

  John Stegeman wrote:

  I agree with the comments of the Ed, NightWing.

  You do not have a story to ask questions that are clearly answered in the documentation.

  Mind your own business. If you answer the question, so answer! Otherwise, please stop the thread engrossing.

• CP9 sensitive project - where are the transitions between slides?

  Transitions between slides are available via the sync Panel when you create a blank project (unfounded).

  Where are the transitions between slides when you use a sensitive project? The distribution Board is not in the property inspector.

  Certainly, it is always possible to add a transition between slides for a sensitive project? If so, how?

  The slide transitions are not supported for projects of a reactive nature, they are not yet supported for the release of HTML5. The distribution panel is available (at least in the Expert user interface), you can apply a transition, but HTML5 Tracker will indicate that this is not a supported feature.

• What are the relationships between the logging and IKM?

  What is the best method to use in the following scenario:
  I have about 20 tables with the large amount of data sources.
  I need to create interfaces that join the source tables in target tables.
  The tables are inserted every few seconds with about hundreds of thousands lines.
  There may be a gap of a few seconds between the insertion of different tables that could be attached.
  The source and target tables are on the same Oracle instance and schema.
  I want to understand the role of: 'Logging CDC' and "IKM - incremental" and
  How can I use it in my script?
  In general, what are the relationships between "Logging" and 'IKM '?
  Use both? Or maybe it's better deelte and insert the target tables?
  
  I want to understand what is the role of "Logging CDC"?
  Can 'IKM - incremental' work without "logging"?
  Must 'Logging' have PK on the tables?
  What should I do if I can't say PK (there may be several identical lines)?
  
  Yael thanks in advance

  user604062 wrote:
  Hello
  Thanks for your quick response!

  No probs - its still fresh in memory I did a major project on this topic last year (400 tables, millions of lines per day (inserts, updates, deletes), sup-5 minute latency). The problem is it isn't that well written on the web, that you have read the blog of the example I linked to in my first answer? See also here: http://odiexperts.com/changed-data-capture-cdc/

  Always on logging:
  My source table is inserted all the time.
  The interface to join the source table in the target table.

  In ODI, the correct term would be your source table "fits" in the table target, unless you mean literally that want to join the the source with the taget table table? My question if you want to do with the result of the join?

  What exactly the "journaling" CDC updates?
  It updates the model of ODI? interfaces? The source of data in the model of ODI? The target table?

  Logging CDC configures and deploys the data capture mechanism (Triggers or log based capture, IE Logminer/streams/Goldengate) - it is not updated the model as such, she pointed out the metadata of the model of ODI repositoty as a CDC data store, allowing you, the developer say ODI to use log data if you wish (reported in the interface) There is no change in the target table, you get an indicator of metadata (IND_UPD) against a line during the integration (in C$ and I have tables$) that tells you if its insertion (I) and update (U) or deletion (D). It had ' lines allow you to synchronize the deletions, but yoy say its inserts only then you probably used use this option. "
  So the only changes are the source table to your interface, another diary data (if you use logging) or the table of the actual source (if not using the logging).

  This is the main thing that I don't understand!

  I hope I made a little clearer.

  Try the following as a quick test:

  Reverse a source table an engineer and the target (at least) table.
  Import the update incremental LKM and IKM.
  Import of the JKM you want to use.

  Create an interface between the source and the target without any deployed JKM.
  Configure the options of JKM on the model, the "Start log" to start the process of capture - this is quite a complex stage and a lot of things to understand what is happening in the source database, better to check code ODI sends to the database and to review the documentation of Oracle database for a description of what his weight (instantiate Tables (, sets of creating change, creation of subscribers etc. establishment of newspaper groups, creating views Journalising etc.) -you will need to consult your Source DBA database initially as ODI wants to make many changes to the source DB (in mode Archivelog process max, parallelism, size, Java etc.)

  Now, edit your interface and mark the table source for use "Journalized data bank.
  Restart your interface
  Compare the difference in the generated code in the journal of the operator, see the differences of the operator.

  >

  Thank you, Yael

• What are the differences between BSE 10 g and 10g of OSB

  Hello
  
  I am newbie to OSB 10 g. I installed OSB 10 g.
  
  I got to know after its acquisition by Oracle BEA, the ALSB is renamed to OSB.
  
  I'm curious to know what are the differences between BSE and OSB panels.
  
  If there are a lot of differences, thanks for posting links that provide the information required in detail.
  
  Thanks in advance.
  
  Kind regards
  Udaya

  Hi Marion,.

  BSE and OSB are two different products for the provision of the capacity of the bus service (Routing and transformation)

  I got to know after its acquisition by Oracle BEA, the ALSB is renamed to OSB.

  Yes. Prior to the acquisition of BEA, Oracle used OESB (Oracle Enterprise Service Bus) like a bus service, but after Oracle renamed ALSB (Aqualogic Service Bus) in OSB and started to help her. SOD below should help you understand-

  http://www.Oracle.com/technology/products/integration/service-bus/docs/Oracle-service-bus-sod.PDF

  Some links that you would like to see-

  http://Biemond.blogspot.com/2009/06/OSB-ESB-performance-comparison.html
  http://orasoa.blogspot.com/2008/11/who-is-best-OSB-or-ESB.html
  http://www.Scribd.com/doc/23622536/Oracle-SOA-Suite-11g-mediator-vs-Oracle-service-bus-OSB

  Kind regards
  Anuj

• What are the relationship between JPA and Hibernate, JPA and TopLink?

  What are the relationship between JPA and Hibernate, JPA and TopLink?
  Can APP instead of Hibernate and TopLink?

  The Java Persistence API (JPA) is the persistence of mapping relational object
  standard for Java. Hibernate and TopLink provide a Java Open source object-relational mapping framework.
  They provide an implementation for the Java Persistence API. In my opinion, Hibernate and TopLink support JPA
  and they can also be seen as complementary to APP.

  We will wait to see the opinions of the other person.

• Error of area UC VCS traversal

  Hello.

  I have the following when configuring the area problem:

  "" "" "" "TVCS: event ="Inbound TLS negotiation error"Service ="SIP"Src - ip = 'IP-of-firewall-between-c-and-e ' Src-port ="48772"Dst - ip = 'VCS-E-IP' Dst-port ="7001"detail ="alert tlsv1 unknown ca"Protocol ="TLS"Level ="1"elements UTCTime = '2015-05-11 13:41:29, 905"

  I downloaded the trusted CA cert and CRL file.

  When you do a 'Client certificate test' its OK performances.

  where should I start looking?

  Thank you

  The fact that it says "unknown ca alert tlsv1" makes me think that the certificate chain is broken, but you mentioned that the secure course test passes? The certificate has the attribute "Client authentication"?