Arrgh, needing help with CSS style sheets

Similar Questions

• Need help with CSS Fonts and AP Divs. (separate issues)

  Hi all

  I have two BIG problems that I just can't understand at all. No matter what I do, nothing works for eith er from these two very different problems.

  I am running Windows7 and using Dreamweaver MX and CS4 (cannot afford to upgrade).

  A problem

  Colors of the fonts, size and Styles. I ALWAYS end up resorting to MX to solve these problems. I need fonts of different colors for the various paragraphs, I also need to sizes and styles. But change always changes. I went in the CSS panel and tried to change it, but no luck. I tried the option "Compound (depending on your selection)", but not chance it. The problem is that CS4 CSS Forces on the reguardless of the user, if they need it or not. The only thing I need CSS for is Accordians, Flash, Drop menus, etc. But when it comes to simple, flat, HTML I have more control as I do in MX. I ALWAYS start a new project as a file HTML but CSS is automatically applied to the entire site.

  What Miss me?

  I need to remove MX, but not until I find this CSS problem.

  =========================

  Two problem

  It is nothing new to most here, I'm sure. The demand for Flash Pop Ups that convert a banner (Style Yahoo) has increased and demand has flooded my ears of the customers. The largest is UGAI. Who has site was created in MX in large part due to the above problem. Advertisers want flash ads full Page that are small and pop up when you fly over its advertising HTML normal or that fills a space and plays Flash runs and then uses their Flash banner to reveal the entire site again. And they are willing to pay BIG for this seemingly simple feature.

  How to make this work? Dreamweaver allows layers/overlays which I can apply transparent in Flash. Also known as a "Div. AP" but these layers keep jumping around. It's even worse when seen in different resolutions. I can get the overlays work perfect on MySpace 1.0 profiles, but not in Dreamweaver or manually via Notepad. And no matter if I'm in MX or CS4.

  PS: I spent MX to CS4 soon as CS4 came out. CSS has proved to be a pain, and now I have to learn CMS (Joomla) as well. All on my own.

  > _ <

  This is a CS4 site created still early in development.

  Thanks for any help,

  Richard

  Problem #1-

  Mylenium says, knowing how to use CSS to style your content is the basis for modern web design. Stop relying on old-fashioned, obsolete HTML style tags. that makes the code invalid, swollen and inflexible work later.

  Let's say you have 3 paragraph styles you want to use throughout your web site: red, green and blue - colours used here for demonstration purposes only.  Simply set the 3 paragraph styles in your external stylesheet and link your HTML pages to this physical file.

  CSS code:

  . Red p {}

  color: Red;

  make-weight: bold;

  }

  . Green p {}

  color: Green;

  make-weight: normal;

  }

  . Blue p {}

  color: Blue;

  make-weight: bold;

  }

  HTML:

  It's Red and "BOLD"

  It's blue and "BOLD"

  In the meantime, it's normal text with red textgreen textand Blue .

  How to link an external stylesheet to pages HTML in DW-
  

  http://ALT-Web.com/demos/DW-link-stylesheet.shtml

  Problem #2-

  You can do it quite easily with a window system modal JavaScript as Floatbox
  

  http://randomous.com/floatbox/demo

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web-design.blogspot.com/

• Newbie need help with css formatting

  I'm new using a dw (cs3) and css, although I have a background in html and coding. I am creating a page using the page "a column elastic, centered, header and footer" layout and I have a header banner with a horizontal spry menu bar at the bottom of the header. the background color of the buttons on the menu bar is red and there is a border of yellow 5px up and down the Red menu bar, so it seems that there is a red bar with yellow edging above and below, and this bar is between the header and the body section of the page. I put these colors in the "ul. MenuBarHorizontal a' rule.
  
  now, the question I have is that my menu bar does not span the entire column, so there is an empty space to the right of my menubar between (the end of the menu bar) and the right column. I would like the appearance of the red and yellow menu bar to expand completely, but I can not understand how to do this in css.
  
  make:
  
  extend the bar menus completely on the entire width of the page? I can't understand how to do this.
  
  Insert a picture to make it appear as if the red and yellow bar continues that extends to the right? If so, how that image will remain elastic and my page?
  
  or is there a better solution?
  
  I'm very new to css and I do my best to understand how everything fits together. the last website I built was in 1997 and it has been done in Notepad. any help would be huge. I'm in kinshasa in the Democratic Republic of the congo, and truth be told it is not a lot of gurus dw here.
  
  Thanks in advance...

  charliemooreiv wrote:
  > you can see what I have up to the http://www.kfhhh.com/amicus/

  Try to cut the border of your ul elements. MenuBarHorizontal a rule so
  what it looks like so...

  UL. MenuBarHorizontal a
  {
  display: block;
  cursor: pointer;
  background-color: #ce1021;
  Color: #333;
  text-decoration: none;
  do-family: Arial, Helvetica, without serif.
  do-size: 14px;
  make-weight: bold;
  Width: 90%;
  padding-top: 0.5em;
  padding-right: .75em;
  padding-bottom: 0.5em;
  padding-left: .75em;
  }

  ... and then create this rule in which are the cutting edge elements
  site as well as a width, background color, and the left float...

  {#MenuBar1}
  Width: 46em;
  background-color: #ce1021;
  float: left;
  border-top-width: 5px;
  border-bottom-width: 5px;
  border-top-style: solid;
  border-right-style: none;
  border-bottom-style: solid;
  border-left-style: none;
  border-bottom-color: #F7D518;
  border-bottom-color: #F7D518;
  }

  Only tested in FF.

  HTH

  --
  Chin chin
  Sinclair

• Need help with css on my site

  Hello and thanks!

  I only know the basics of Web design. I'm still learning. I asked for help here and get some great results. My website is located at http://www.ci.guilford.ct.us/ , if you look at the quick links section, there is a css for this configuration. My question is this. The last link called Guilford mass Notification I would put red or another color. What would be the best way to do this to keep things consistent but also not to spoil it? Any help would be appreicated. Thank you!!

  Tony

  Create a CSS pseudo-class.

  #quicklinksContainer ul li a.red {color: red ;}}

  HTML:

• Your text link

Nancy O.

• CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server

  CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server, if anyone can help I would be grateful.

  There are major problems with this page as shown in the screenshot below.

  

  This is caused by a liberal hijacking of APDivs (aka layers) for a main page layout.  This isn't what APDivs were intended.  That's why Adobe them removed from DW.  Unfortunately, not soon enough.

  I think you're the best option is to start over with a pre-built CSS layout that doesn't contain positioned elements.

  Either way, Flash is dead now.  Most of the people cannot display Flash media more.  You can convert the HTML5 video or use YouTube to host videos now.

  Nancy O.

• "Recursive" error when you try to join my CSS Style sheet

  I'm totally new to CS5 - in your tutorial (create your first website - part 2: creating the page layout) which I followed to the letter, it guides you through to attach a style sheet in the ccs html file.

  I get the error message "an import style recursive was found. in the dialog box to attach an external Style sheet, there are two options one is 'Import' and the other is 'link '. Link is grayed out? So I can't select it. It would seem that there may be a problem with your tutorial?

  Here is my code that I checked and rechecked.

  I noticed that on that three other discussions has not solved the problem?

  I hope someone can help
  

  CCS Style sheet

  @charset "utf-8";

  / * CSS document * /.

  #container {}

  Width: 968px;

  Background: #FFF;

  margin: 0 auto;

  padding-left: 10px;

  padding-right: 10px;

  overflow: hidden;

  }

  HTML

  
  

  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"

  < title > check < /title > Magazine

  < / head >

  < body >

  < div id = "container" >

  < div id = "banner" > content ID "Banner" goes here < / div >

  < div id = 'main_image' > content for id 'Background Image' goes here < / div >

  < div id = "left_column" > content ID "left_column" goes here < / div >

  < div id = "center_column" > content ID "center_column" goes here < / div >

  < div id = "right_column" > content ID "right_column" goes here < / div >

  < / div >

  < / body >

  < / html >

  
  

  The recursive error is caused by trying to set the stylesheet to himself. Make sure that the HTML document is open in the Document window, then click on inside the document to give it focus before trying to set the style sheet.

• Help with text Style loaded dynamically

  Hello

  I'm trying to style some dynamically text. I have an attached css style sheet and it works partially. I got my links to works but now I am trying to add a bit of space under my h1 tag and I can't make it work. When I add the tag I am able to change the font size, but I can't get the line style / height for working. Even when I don't put the line-height property There he leaves a giant space between header and link entry. Just that there is some space.

  Right now in my txt doc I have only the header label associated with the first h1 headers/States.

  I enclose the link, text and code. I'm not good with tags and style sheets.

  Clues?

  Thanks in advance for the time

  Sandra

  link:

  http://www.sandraschmitt.com/Coclico/index102.html

  CSS stylesheet:

  H1
  {
  Color: #333333;
  do-size: 10pt;
  line-height: 12pt;
  }

  one
  {
  Color: #333333;
  }

  a: hover
  {
  text-decoration: underline;
  }

  txt doc:

  ALABAMA < h1 > < / h1 >
  " < a href =" http://www.abbeyluxe.com "target ="_blank"> Abbey luxury < /a > "

  CALIFORNIA < h1 > < / h1 >
  " < a href =" http://www.americanrag.com "target ="_blank"> American Rag < /a > "
  " < a href =" http://www.crimsonmim.com "target ="_blank"> Crimson Mim < /a > "
  " < a href =" http://www.deliciouz.com "target ="_blank"> Deliciouz < /a > "
  " < a href =" http://www.gimmeshoes.com "target ="_blank"> Gimme shoes < /a > "
  " < a href =" http://www.lesdeuxcopines.com "target ="_blank"> the two girlfriends < /a > "
  " < a href =" http://www.margaretoleary.com "target ="_blank"> Margaret O'Leary < /a > "
  " < a href =" http://www.rabatshoes.com "target ="_blank"> < /a > Rabat "

  COLORADO
  " < a href =" http://www.shopscarpe.com "target ="_blank"> < /a > scarpe "
  " < a href =" http://www.strutdenver.com "target ="_blank"> Strut < /a > "

  Georgia
  " < a href =" http://www.pellashoesatlanta.com "target ="_blank"> < /a > Pella "
  " < a href =" http://www.sabotshoes.com "target ="_blank"> < /a > hoof "

  ILLINOIS
  " < a href =" http://www.citysoles.com "target ="_blank"> city soles < /a > "
  " < a href =" http://www.shirise.com "target ="_blank"> Shirise < /a > "

  KANSAS
  " < a href =" http://www.habitatshoes.com "target ="_blank"> home < /a > "

  MASSACHUSETTS
  " < a href =" http://www.louisboston.com "target ="_blank"> Louis Boston < /a > "

  NEBRASKA
  " < a href =" http://www.denizshoes.com "target ="_blank"> < /a > Deniz "

  NEW JERSEY
  " < a href =" http://www.primadonnaboutiques.com "target ="_blank"> shops Primadonna < /a > "

  NEW HAMPSHIRE
  " < a href =" http://www.heiumshoes.com "target ="_blank"> Heium < /a > shoes "

  NEW YORK CITY
  " < a href =" http://www.kaightnyc.com "target ="_blank"> Kaight < /a > "
  " < a href =" http://www.taninnyc.com "target ="_blank"> < /a > Tani "
  " < a href =" http://www.vervenyc.com "target ="_blank"> < /a > Verve "

  PENNSYLVANIA
  " < a href =" http://www.joanshepp.com "target ="_blank"> Joan Shepp < /a > "

  TEXAS
  " < a href =" http://www.bygeorges.com "target ="_blank"> George < /a > "
  " < a href =" http://www.gottahavemypumps.com "target ="_blank"> I need my pumps < /a > "

  VERMONT
  " < a href =" http://www.Stella-shoes.com "target ="_blank"> Stella shoes < /a > "

  the line height is not a supported Flash css property.

  You can use attack.

• My own starter CSS Style sheet

  When I go to a new Document, I want my own Starter style sheet (with the code outlined in the way I like, design classes, major base fonts, etc) appears under "category: CSS Style Sheets" or "Page designs (CSS). How can I do this?

  To do this, you would have to edit some internal files in DW.
  Specifically, you need to add to your page (with a corresponding picture)
  the folder in this location-

  C:\Program Files\Adobe\Adobe Dreamweaver CS4\configuration\BuiltIn\Layouts

  (PC, of course)

  On a Mac, they are here - Applications: Adobe Dreamweaver CS4:
  configuration: BuiltIn: Layouts

  It would be much easier to simply create a template for this site.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "DataGnostics" wrote in message
  News:girpou$9hv$1@forums. Macromedia.com...
  > When I go to a new Document, I want my own Starter style sheet (with the)
  > code
  (> outlined in the way I like, sizing of the basic fonts, important classes, etc.)
  > to
  > appears under "category: CSS Style Sheets" or "Page designs (CSS). How to make
  > I don't
  > This?
  >

• Need help with mobile layout

  Hello. Need help with my layout sensitive, using straight lines only html5 and css3 that I can understand and explain a novice level please - without any restart. Desktop and mobile are in a single html doc. The desktop version is 'ok '.

  current version (6_2)

  Try to match these mobile Office layouts

  On the mobile version:

  -Impossible to get the buttons nav blocks, vertical text button Align, and align the image of the product (square pictures) to the Center. (margin: auto; does not work)

  I used heights in the header because I'll have code for desktop, mobile and tablet in the CSS so it changes (and do not know how to support better). Also need to Add a link to the logo image background in header.

  Thanks in advance!

  TheOriginal150mph wrote:

  Hello. Need help with my layout sensitive, using straight lines only html5 and css3 that I can understand and explain a novice level please - without any restart. Desktop and mobile are in a single html doc. The desktop version is 'ok '.

  current version (6_2)

  Try to match thesemobile Officelayouts     

  On the mobile version:

  -Impossible to get the buttons nav blocks, vertical text button Align, and align the image of the product (square pictures) to the Center. (margin: auto; does not work)

  Commenting on just a habit of property changing the css if you have defined it for the desktop version. Your nav elements are not vertically Center because you have a bottom padding set on them for the office, there are only changes for mobile in your css media query.

  .main-nav a {}

  display: block;

  text-decoration: none;

  / * padding-bottom: 15px;   */

  Padding: 12px 0;

  }

  Change the properties for the .product-images for mobile boxes: you have float attached to them for the desktop version and which cascade down to the mobile version, unless you change in the media query:

  .product-image {}

  float: none;

  Width: 50%;

  margin: 0 auto 20px auto;

  }

  As I mentioned in one of my posts related to your project, you will probably have to make your product images a bit larger. They fill the area once they form a column to width of 768px screen or you could resist transform them to one column until a little more by using a media query extra set at a narrow screen width to evoke this action

• Hello, I need help with my photoshop, rececently the majority of my family disappeared merger options and I cant access AVC and other options ive tried reset preferences and it seems to come back but when I add an image and try add text again

  Hello, I need help with my photoshop, the majority of my family rececently disappeared options fusion and I can't access strokes and other options ive tried to reset the settings of preference and he seems to come back but when I add an image and you try to add text again, they'll only options I have are drop shadow , gradient, Chromakey, shine of satin overlay, inner (I use photoshop cc 2015) Please help, my Skype contact options are: RoblivionM8 and email:[email protected]

  Thanks for your time

  Your first screenshot shows the layer style dialog where not all types of effects are indicated on the left. Bottom left of the dialog box, you see a small icon fx with a menu arrow drop-down. Use drop down the menu and make sure all you click on show all effects or restore the default list. I don't know what you're trying the shoe on the second screen capture.

  

• Making the ear of corn and need help with the ball.

  I do some corn on the COB for an illustration and I need help with the texture of the ball. I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all. I tried to recreate it in a rectangle by using the option in the menu object (1 row, 50 columns) gradient mesh and I'm trying with the fusion in object mode, but not lucky yet. Can someone help to put me on the right track to make the texture:

  

  

  

  I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all.

  Tank,

  You have published three images stylistically very different. The first is photographic and call probably (but not necessarily) for graduates of mesh. The other two are graphical treatments (and frankly, they're both rather flat; lack of depth).

  Illustration style extends the range of cartoonish in sketchy photo-realism and all the rest. The problem is you didn't show your own attempt so that anyone can have an idea of what you're trying to achieve the stylistic point of view.

  I just need to put in place so that the final step does not appear the whole box. The problem now is trying to make the style of the good brush to reproduce the effect...

  You seem to think you have to build a kind of linear construction and then find a way to reshape the shape of each part of the leaf. Yes, you pouvez approach it this way, but Illustrator users has often tend to be what aunt Molly would call "too clever by half."

  Not everything must be something semi intelligent auto or complex and tedious consruct involving brushes, envelopes, masks, etc, etc. Much can be accomplished by thinking that he just thanks to measure you draw directly economic paths and constructions, which take no more time (often less) and result in very tidy, simple files. Again, a lot depends on what you are trying to achieve the stylistic point of view. But here's an example that only took a few minutes to draw:

  

  

  

  

  

  If the above consists of:

  Three roads closed, 8 points each, with ordinary linear degrees

  Three mixtures of open path with three anchor points for each key path

  Six paths closed for shadows / highlights, with 19 points in total

  Mixtures being directly from the paths drawn comic forms, the spacing of the veins 'automatically' and intuitively follows the width from point of view of the worksheet.

  Rather than to build a boilerplate brush, colouring and the weight of each of the three main paths of the vein mixtures can be set individually at any time, simply directly by selecting the key path.

  JET

• Need help with Dreamweaver Divs

  
  This is a clip of my site that I do, is not yet online.
  But what I need help with the div, as you can see the div with the blue text overlaps a Fireworks html banner I made.
  Anyway I can fix this so that the Fireworks banner goes over the div instead of the other way around?
  Any help is thanked!

  It is a problem with the stacking order.  Your division of the blue text takes precedence over your menus rollover.

  Please read on z-index.

  http://www.smashingmagazine.com/2009/09/15/the-z-index-CSS-property-a-comprehensive-look/

  For answers, we need a link to the page to test your site.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• Newbie needs help with cookie cutter in PSE8

  I'm new to PSE8, the cookie cutter tool and work with layers, what I need help with to accomplish what I want to do.

  I want to use one form of cookie cutter to make several 'holes' in an image, leaving a solid color background layer to show through. (Or another path, use the form of Cutter of biscuit as a solid 'rubber stamp' color to stop shape on the image in several places)?

  I opened my image in the editor and create a solid color fill layer, and then I select the shape of Cutter of biscuit that I want to use, for example a sheet.  Then I select the color fill layer, click and drag to create the sheet randomly somewhere in it.  When I release the mouse button, the window returns to the image and there is the leaf, locked in a box, in the color I want, on the image. I drag the box (leaves) to where I want it and click the green checkmark to accept. So far so good.  Here's the problem: in order to create another sheet on the image, I have to create another layer of fill and repeat the whole process.  If I try to use the same fill layer to a second sheet, the first sheet disappears.  I must be missing something very simple, but I can't figure out how to get out several sheets of a filling layer.  Also, I use a version without the constraint of the sheet because I would create several sheets of different sizes out of the fill layer as well.

  I would be grateful for any help or suggestion!

  Try the following:

  1. File > new > empty file - white
  2. Create a new layer, fill it red
  3. Create a new layer, fill it out of blue
  4. Access the marquee tool, drag the rectangle to the blue layer. You should see "ants in market". Press DELETE on the keyboard.  You should see red in the rectangular hole.
  5. Access to the custom shape (U) tool. In the form of culture library, select the heart shape black all and hang out on the blue layer. Press CTRL + left click the thumbnail of the layer of the capping layer for "mobile dotted." Hit delete on keyboard twice, and you should see red in the heart shaped hole.
  6. Continue with other forms.

  

• I'm suddenly needing help with my browser Firefox (6.0.2)

  Hello
  I'm suddenly needing help with my browser Firefox (6.0.2)

  (OS: I use Windows XP).

  When I open the browser, I don't see is a totally white screen of white, with all the toolbars at the top.

  I know that my physical connections are very good: I have tested the modem, turned the pc market etc and I can also receive/send emails.

  This problem started today, September 8, 2011 and has never happened before.

  Is it a coincidence that Firefox itself to day before I disconnected yesterday evening? Could this be something to do with this particular new update?

  I also noticed that just before I "opened" Firefox, I now get a small box indicating:

  [JAVASCRIPT APPLICATION]
  Handl exc in Ev: TypeError: this oRoot.enable is not a function

  This never appeared before - I hope that it offers a clue has what is wrong.

  The browser not be stuck in Mode safe, said by the way.

  Of course, I can't find solutions to the problem on the internet, I don't physically see all Web sites!
  (A friend sends this request in my name from their pc)

  Any light you can throw on this problem of confusion would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.

  If the only option is to uninstall Firefox and reinstall from your site, I'm also in trouble (I can not see the internet or download).
  In this case, would you be able to send the .exe file as an attachment to my e-mail address? In the affirmative, please let me know and I'll give you more details.

  Thanks in advance.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Need help with installation on Photosmart C7280 all-in-one

  I had my printer is installed and has been using the printer for 3 wireless laptops in my house.  Now, I can't even find my backup drive, so I have need help with downloading the software to use my printer and also get to use wireless.   I don't know what happened, but the fax for this printer is listed, but not the printer itself.   Help, please!

  Click here to download the software for your printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3204785 & LC = on & CC = US & DLC = in & lang = to & CC = US

  has chosen the appropriate operating system that corresponds to your computer and download the full software features.