arrows move the object in opposite directions - default type in vertical orientation

Similar Questions

• Cannot move the object

  Hello

  I scanned a drawing that I place on it's own layer from the office, he was directly drawn, expanded and consolidated.

  When I select to move it, either using the arrow keys or the transformation/move command, I get a message that I've ever seen before "cannot move the objects. "The requested transformation would make some objects fall completely the drawing area.

  Could someone explain what it means?

  Thanks for any advice.

  Occurs usually when you have a wandering point or a selected guide. Zoom out all the way. You have something that is going to the grey area (outside the mount table) completely.

• Help, please. New CS 4 error: cannot move the objects. the requested transformation would make some objects fall completely the drawing area.

  I know that this is not a 'new' error message, but I never got on the previous versions of Illustrator. I just upgraded to CS 4 and get it now on almost all files when I try to move an object in any direction. Not that it matters, but these are files that were created in previous versions of Illustrator and I never had this problem. I followed the instructions of similar positions without success. I zoomed way toward the edge of the art Council: there is no hidden layers, objects or guidelines, no persistent points of the guidelines are erased, or objects of any kind anywhere near the edge of the box art (which, I know it, is huge compared to the size of my working paper of 11 x 17)

  What Miss me?

  In addition, on occasion, when I CAN move an object (usually a JPG or PDF image that I placed in the document), the image disappears. I think it is always 'there' even if I'm not. Any suggestions?

  Is it possible that your keyboard Increments area struck a giant number? Check under general preferences. (removal of preferences would also reset it)

  Also, to double check - when you zoom in completely to where you can see the limits of the editing table (so you're zoomed out to like 5% or something like that) UNlock all United Nationshide all and select all, is your framework of selection within your page?

• I opened a high-density .tiff file in photoshop, but I can't move the object

  I opened a high-density .tiff file in photoshop, but I can't move the object

  Chances are that the image is the same size as the document. You can either add Web Image > canvas... size , use the crop tool and do drag outwards to create more space, or reduce the size of the image ctrl-t or command-t then scale the image inward.

• Move the object object vs. copy

  OK, the assistants of the Illustrator, I have another puzzle - it is more often the case (more often) that when I call the command move what I really want to do is to copy the intended purpose x or y inches. The command move has a button for copying, but the default action is to move. Is it possible to change the default action to copy? or y at - it another command I should use? I would like a simple method to make the x - up for printing layouts.

  Thank you!!!

  -g-

  You could grab the object, press the alt key and move it. You can enter a new x-y-value or in the transform Panel, and then press alt + enter.

• move the object or shift page

  Hello!

  I have a lot of files with x A4 pages.

  At the top right of the pages, there is a box with name and address.

  I can move the box?... I need to translate the box down to a few millimeters...

  Alternatively, move all the contents of the page down (not only the box...)... what I can do in javascript?

  Thank you

  Andrea

  You cannot move content selectively in a PDF using JavaScript. The only way to move programmatically, an object or a group of objects is via a plug-in of Acrobat (written in C or C++). However, you can move all the contents of the page using JavaScript by changing the harvest of your pages and media boxes. Take a look at this script, it shows how this is done. The script moves all content by an inch (72pt). If you need a different distance, you must convert the distance you want to move your content in mm at points. A point is 1/72nd of an inch and one inch is 25.4 mm.

  // move content down by a certain amount
  (function() {
      var a = this.getPageBox("Media");
      a[1] += 72;     // 72pt is 1"
      a[3] += 72;
      this.setPageBoxes({cBox: "Media", rBox: a});
      a = this.getPageBox("Crop");
      a[1] += 72;     // 72pt is 1"
      a[3] += 72;
      this.setPageBoxes({cBox: "Crop", rBox: a});
  })();
  

• Move the object centerpoint

  I would like to create a series of numbers in a radial chart for an indicator of speedometer. It should be fairly easy to create a number, move the center point to the middle of the dial and then run a certain number of degrees. But it is desperately difficult. I was also told to use Parent and create a small object in the Center and use layers for numbers of parents. I do not see how things to a parent or who carry out.

  Anyone have any suggestions?

  Thank you!

  Andacar

  Do you want the numbers to stay oriented vertically or follow the Ark? After the arc is not a problem, maintain the vertical alignment is more delicate.

  For the text rotated:

  1. First point position in place text object (12:00 position works well).
  2. Object text selected, choose "rotation tool" and Option + click on in the center of the dial
  3. Degree of rotation of type and click 'Copy' (to calculate the type of rotation 360 / [dial positions number] and press "Tab".) I will return extra degree).
  4. Press 'Cmd + D' to duplicate the last action until all text objects are in place
  5. Updated text of characters of your choice

  For the text without rotation:

  1. Create the first text object
  2. Convert to symbol
  3. Follow steps 2-4 from above
  4. Select all occurrences of symbols
  5. Click 'Reset' (this is to realign all vertical)
  6. With all instances of the symbol selected, click on "break the link.
  7. Updated text of characters of your choice

• Move the object by the "reference Point".

  I need to move the images on my document using different reference points. But it seems that by default, it moves using the 'AnchorPoint.TOP_LEFT_ANCHOR '. I can't change it.

  Here is my code:

  myDoc var = app.activeDocument;

  var changeRefPoint = app.activeWindow.transformReferencePoint = AnchorPoint.TOP_RIGHT_ANCHOR;

  if(MyDoc.Selection.Length == 1)

  {

  If (app.selection [0].constructor.name == "Rectangle")

  {

  var rectangle_graph = app.selection [0].move([159,61.3]);

  }

  }

  Hi Ken0207,

  I'm afraid that the setting of PageItem.move (in, in) is always top-left-anchor parent, regardless of the current transformReferencePoint.

  I can't test it in depth, but the following function should do the job:

  function moveToConsideringAnchor(obj, xyDest, anchorPt)
  // -------------------------------------
  //       :  any singular PageItem specifier
  //    :  [x,y] location expressed in the current ruler space
  //  :  the considered AnchorPoint (default is top-left)
  {
      if( !(obj && obj.transform) ) return;
  
      var CS_PASTEBOARD = CoordinateSpaces.pasteboardCoordinates;
  
      anchorPt || (anchorPt=AnchorPoint.topLeftAnchor);
  
      var xy0 = obj.resolve(anchorPt,CS_PASTEBOARD)[0],
          xy1 = obj.resolve([xyDest, anchorPt],CS_PASTEBOARD,true)[0],
          dx = xy1[0]-xy0[0],
          dy = xy1[1]-xy0[1];
  
      obj.transform(CS_PASTEBOARD,[0,0],[1,0,0,1,dx,dy]);
  }
  
  // ---
  // SAMPLE CODE
  // ---
  
  // Your settings:
  var CONSIDERED_ANCHOR = AnchorPoint.BOTTOM_RIGHT_ANCHOR,
      XY_DESTINATION = [159,61.3]; // in ruler space
  
  var sel = (1==app.selection.length) && app.selection[0];
  
  if( sel instanceof Rectangle )
      {
      moveToConsideringAnchor(sel, XY_DESTINATION, CONSIDERED_ANCHOR);
      }
  

  @+

  Marc

• move the object left and right

  Hi, how are you all? I hope you all well...

  Now IAM trying to do more spells for the hero and this spell is the fireball

  I want to spend the time the hero is on the right also leave when the hero on the left

  I tried with this code when you press w it should move 10 or 20 px then it must stop

  but the fact of idont this step "then it must stop" because of this error as the fireball, call

  like I want to

  TypeError: Error #1010: a term is undefined and has no properties.

  Hero / onEnterFrame)

  Here is the code

  HERO class

  package {}

  
  import flash.display.MovieClip;

  import flash.events.KeyboardEvent;

  import flash.ui.Keyboard;

  import flash.events.Event;

  import flash.sensors.Accelerometer;
  import flash.media.Sound;
  import flash.media.SoundChannel;

  
  SerializableAttribute public class extends MovieClip {HERO
  var NIGHTJUNGLE:nightjungle = new nightjungle
  var ELECTRICALSHIELD:electricalshield = new electricalshield;

  var speed: int = 3;
  var fireballindex:Array = new Array
  var dir:int;
  var ELECTRICITY: electricity = new electricity;
  var SOUNDCHANNEL:SoundChannel = new SoundChannel
  var firespeed:int = 50
  var i: int
  public void HERO() {}

  addEventListener (Event.ADDED_TO_STAGE, onAddedToStage);

  }

  public void onAddedToStage(event:Event):void {}

  addEventListener (Event.ENTER_FRAME, onEnterFrame);

  stage.addEventListener (KeyboardEvent.KEY_DOWN, onKeyDown);

  stage.addEventListener (KeyboardEvent.KEY_UP, onKeyUp);

  
  SOUNDCHANNEL = NIGHTJUNGLE.play (1,1000)
  gotoAndStop (4);
  

  }

  public void onEnterFrame(event:Event):void {}

  x += dir * speed;
  {if (fireballindex [i] .stage)}
  .x += fireballindex [i] 1
  }

  }

  public void onKeyDown(event:KeyboardEvent):void {}

  If {(event.keyCode is Keyboard.RIGHT)

  gotoAndStop (2);

  dir = 1;
  Speed = 10
  If (ELECTRICALSHIELD.stage)
  addChild (ELECTRICALSHIELD)
  

  }

  
  If {(event.keyCode is Keyboard.LEFT)

  gotoAndStop (1);

  
  dir = - 1;
  Speed = 10
  If (ELECTRICALSHIELD.stage)
  addChild (ELECTRICALSHIELD)

  }

  If {(event.keyCode is Keyboard.UP)

  gotoAndStop (1);

  y = 10;

  }

  If {(event.keyCode is Keyboard.Q)

  Speed = 30;

  addChild (ELECTRICALSHIELD);
  SOUNDCHANNEL = ELECTRICITY.play)
  
  }
  If (event.keyCode == Keyboard.W) {}

  
  fireballindex.push (new fireball())

  addChild (fireballindex [i])
  fireballindex [i] .width = 50
  fireballindex [i] .x += firespeed * dir

  i ++
  trace (i)
  }
  If (event.keyCode == Keyboard.E) {}
  MovieClip (parent).aa.x = x + 100
  }
  }

  public void onKeyUp(event:KeyboardEvent):void {}

  If {(event.keyCode is Keyboard.Q)

  If {(ELECTRICALSHIELD.stage)

  removeChild (ELECTRICALSHIELD);
  If (SOUNDCHANNEL! = null)
  Speed = 0;
  SOUNDCHANNEL = ELECTRICITY.play (1,1)

  }

  }
  If {(event.keyCode is Keyboard.W)

  
  }
  

  If {(event.keyCode is Keyboard.LEFT)
  Speed = 0
  gotoAndStop (3);
  If (ELECTRICALSHIELD.stage)
  addChild (ELECTRICALSHIELD)

  } Else if (event.keyCode == Keyboard.RIGHT) {}
  Speed = 0
  gotoAndStop (4);
  If (ELECTRICALSHIELD.stage)
  addChild (ELECTRICALSHIELD)
  }

  }

  }

  }

  Thank you

  I would not use 'i' to target the object of the fireball.  In the case of the fireballs to withdraw at any time, that the value of i will be false.  The fireball that you add may not of fireballindex [i].

  If all the code that goes in the same neighborhood, then I declare the instance var name and use the name...

  var fBall:fireball = new fireball();

  fBall.name = "fb" + String (i)";

  fBall.width = 50;
  fBall.x += firespeed * dir;

  fireballindex.push (fBall);

  addChild (fBall);

  i ++ ;

  Later if you need to target this fireball, you can use the table or you can use its name.

  If you still want to use the non-var approach (I see no reason to) then instead of target

  fireballindex [i]

  I would target the last element added to the matrix who is definitiely going to be

  fireballindex [fireballindex. Length-1])

• Move the object of class position

  Hello

  I'm looking for how to move an object from its current position to a coordinate _x designated.  I want a current position to a variable which followed where he is currently and travel automatically without having to say move from 24.7 to 35.8, for example. I am usuing tweener mx base classes and would like to keep it this way.  Basically, I create a nav where a point flies in the selection of nav. So the end result is I want the code that says travel to this coordinate _x wherever you are currently.

  Thank you!

  1. it is not the tweener class.  It's the tween class.

  2. you can put all of these on a single line if statements and use an interpolation function:

  navHome.onRelease = function() {     if (navBullet._y == -360 || navBullet._y==-319||navBullet._y==-279||navBullet._y==-237||navBullet._y==-196) {          bulletTween = new Tween(navBullet, _y, Back.easeOut, navBullet._y, -402, 1.5, true);     }};
  
  
  

• Move the object to the mouse click

  Hi all!
  I'm in a group of study at Aalborg University in Denmark, where we are currently working on a small game Flash, nothing big, nothing fancy, just a part of a small project.
  
  I am currently working to set up one small card game, a card where a character can walk and talk to the NPC and other. We just started to I'm pretty much just working with the basics here. Everything has started to learn AS3 too. I created an object, in this case a circle that gets drawn when I run my code DID, the circle is drawn in the Hugo to my step. What I want, since the game is isometric and moves in these isometric lines rather than upward, downward, to the left, right, I want to do a funktion where, if the mouse is clicked in a place where the X coordinates and are below where is the object, then the object moves to the square.
  
  I hope you can follow me on this point, otherwise, please tell.
  The code I have is for the moment:
  
  

• Why can't change size and move the object when I do the pdf a document from windows?

  I got my shipping label that came in a .pdf file to a .doc because it had to be smaller than what was sent to me.  But now I can't modify the object, there is no transfer as a single item, each piece of the shipping label needs to be moved.  Are there not an easiest way without having to pay more money once more.  I've already paid to be able to transfer PDF to doc but it is pretty useless, and I would like to just get my money back!

  The exported content reflects what the PDF Creator has pushed into the PDF. What you're saying, it seems the PDF creator uses a routine of PDF creation poor or provided an image that has been put in the PDF file.

  If the PDF file is just an image (or policies described, which are essentially a fancy characters image) then what is exported image. The export of 'chunks' can cause a 'source' image that is formed by "pieces".

  So, you paid for the export capacity & that's what you have.

  Basically, you want to get a better quality PDF.

  Be well...

• CS6 Illustrator crashes when click-and - drag to move the object.

  Run 16.0.5 on a MBP OSX 10.9.5 the retina. Whenever I try to drag an object to move, Illustrator crashes. I can click on an object/points and move with my keyboard arrow keys, but not with the mouse or trackpad. I have reimagee my machine, with all fees install cs, but the problem persists. All tracks for a solution are appreciated.

  e,

  The problem may be caused by the extension Chrome Pushbullet, see this post by Matt #3 with solution.

  https://forums.Adobe.com/message/6984777#6984777

  or by the Adobe color extension, see this post #2 of byhexxstatic with the solution,

  https://forums.Adobe.com/message/7095368#7095368

  or you could try to reinstall using step three way:

  Uninstall, run the cleanup tool and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• 5.6 pages move the object to the background?

  Near as I can tell, there is no way to float an object behind the text in a Pages 5,6 word-processing file.

  I can place the rectangle, select it, but "send to back" do not place behind the text.

  Change the implementation of 'Stay on the Page' or 'Move with the text' does not work.

  I can't believe they have eliminated this option in the recent upgrade, but hope that they were hiding somewhere that I have not watched.

  Someone knows how to do this? (Outside of return to an earlier version of Pages.)

  Photo:

  

  Using the option "master article" seems wrong and a bit stupid.

  Help?

  What you have discovered is the trade-off between the use of object moving to Section Master in v5.6 Pages, or by using a real word processing in Pages ' 09 v4.3 (below) that allows to define simply object to the background (selectable or not) and he remains behind the text.

  

• screen suddenly moves when I move the object

  I'm on a Mac Pro 2009 w / 2 hard drives and graphics card updated, OS 10.9.3, with Apple keyboard and Apple mouse. Monitor Dell, two years old. I use Adobe Creative Cloud membership.

  Why my screen moves horizontally and vertically, while the zoom out, when I move objects in Illustrator.

  I thought it might be parameters of the mouse or the keyboard, but I changed the settings several times and tried other mice, as well as Illustrator Prefs changed several times.

  Any suggestions are welcome.

  Thank you.

  Nothing is checked for accessibility, but I think that the Hot Fix for AI 17.1.0 (Mac), that he fixed. Thank you.