ART COMPLETELY DISAPPEARED

Similar Questions

• Pagefile.sys has completely disappeared. It started when the power failed and my computer crashed.

  My pagefile.sys has completely disappeared. This all started when the power failed and my computer crashed.
  I get the message that he was away, I went to the performance and settings and tried to change custom settings & re-start.

  No matter what I do, nothing works. I lost several hours of visiting sites for tips and nothing seems to help.

  I was told when re-boots WinXP it creates the new file pagefile.sys and I should delete the pagefile.sys file may be corrupted on the C drive.

  So I put the folders to show hidden files and delete pagefile.sys. I have re-set and tried to recover with no success.

  There is now absolutely no pagefile.sys on my C drive. Anyone know how I can get back my pagefile.sys?

  I want to get my virtual memory works again?

  Thank you very much in advance!

  I'd start first with the chkdsk/r.

  Don't forget - if you have a factory installed recovery Partition, fixmbr will scan it as the Master Boot Record that written XP will equal not the MBR installed by the factory, so first run chkdsk /r (did I say that already)?

  Here are some instructions:

  http://pcsupport.about.com/od/fixtheproblem/SS/RCONSOLE.htm

  Where people have no XP bootable media, here are my instructions:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Disk defragmentation has completely disappeared

  Original title: I run Windows Vista and disk defragmentation has disappeared completely. I used the search but unable to find it. Can you tell me how to get it back
  Disk defragmentation has completely disappeared from my computer. I did research for it but no luck. Can you tell me how it could have disappeared and how can I get it back

  Check if defrag is disabled in computer management services.

• Windows media player has completely disappeared from my computer. I can't find even in programs

  I have a Vista program. When I did the updates and things may have changed, my Windows media player has completely disappeared from my computer. I can't find even in programs. What can I do?

  Hello

  You can navigate to C:\Program Files\Windows Media Player and check if the wmplayer file is listed. If it is there, and then create a shortcut on the desktop or right-click on "wmplayer" and chose "Pin to start menu" and check if it helps.

  Hope this information is useful.

• My window of export in LR4 has completely disappeared. Help?

  Working fine until tonight... the window export completely disappeared. I installed the update to 4.2, no luck. Restarted the computer, nothing. Uninstalled LR completely and re-installed, still nothing. Does anyone else have this problem? I can't display the window with the options with regard to exports, it is impossible.

  You are already working with a second monitor?  This is usually the result of dialog last export being used on a (now offline) another monitor.

  If the web Weaver suggestion does not work, try trashing preferences eferences-file http://members.lightroomqueen.com/index.php?/Knowledgebase/Article/View/1148/198/how-do-i-supprimer-the-lightroom-pr

• I have old applications MS which well serve my needs. I installed them in Windows 8, and they have completely disappeared! Why?

  I have some old MS programs that have served me well.  I have no need to update and learn new applications each year for my home use.  I installed Office 97 under Windows 8... actually I don't need Word 97 and Excel 97 for my use domestic.  These 2 programs worked well after that that they were installed.  I went back later to reuse them, and they have been completely removed from my computer.  Other than for Member States to make more new money software to sales, I see no reason why my old programs should disappear like that.  I had other programs disappear in the same way. and it's very annoying!  How can I stop my programs disappear?

  You can use the latest versions of Microsoft Office in free Skydrive and free cloud storage as well. Check it out here: http://windows.microsoft.com/en-US/skydrive/download?ocid=SKY_O_WOL_SM_SkyD_SKYD_Null. Hope this helps and if you need any other help post and I'll be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

• PS CS6 completely disappeared from my pc

  Photoshop CS6 worked well until about an hour ago... now the shortcut is missing.  It seems that the app has disappeared completely.  Went into creative cloud and he says CS6 had updates but I get an error U44M1I210 code.  Any suggestions?  I am currently paying.

  Please see:

  http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1i210-installing-updates-CCM.html

  Kind regards

  Ashutosh

• Siri has completely disappeared from my pad

  mini iPad 4 bought recently: disappeared it is not to find anywhere I looked on & more. How can I get that back, a genius out there? Thank you

  Siri is not really "appear" anywhere (except in settings > general > Siri).

  Use Siri on your iPhone, iPad or iPod touch - Apple Support

• Beats Audio has completely disappeared from my HP Envy 6 1010ea

  I've recently updated my ultrabook and the beats audio Panel completely gone!

  It was working fine before the updates (which have been "recommended by HP")...

  I can still change the function of power on and off beats using fn + b but when I go to open the audio control beats it says boot file not found...

  Any help?

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56717.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When finished, restart the computer and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once done, restart the laptop.

  Kind regards

  DP - K

• Qosmio G30 - 102 screen completely disappeared

  I read a lot of messages about the green lines, white spot, and blue screens. However my laptop screen has taken a step beyond that and stopped working!

  I have a Qosmio G30 102. I was playing a game (use high amounts of graphics) when suddenly the screen went. I restarted the computer, but it came with the different colors of the Rainbow (green lines, would change to a completely white screen). The problem was once windows starts to load than the screen turns off. I used the function keys to review the settings of the screen (if you want it to be double screen, connected to the LCD tv), but nothing would work.

  I decided to restart the laptop, but it now came with windows not stopped correctly and gave me the options to start the computer and had pixels all messed up (some letters were missing), windows, put in place would not work after the reboot because the screen turns off.

  So now, the laptop is just left with a blank screen. I can't install windows and my warranty is now sold out (ironically just 1 month ago: S)

  Any help would be appreciated!

  Thank you

  I found these Toshiba update document produced on the Europe of Toshiba page:

  http://EU.computers.Toshiba-Europe.com-> download-> Product Updates & support

  _ + Update: update the BIOS Toshiba Qosmio G30 and the GPU + _ repair program
  + This question is strictly limited to the Toshiba laptop computer model which was produced during the period from January 2006 through June 2007. Except as noted below, any other Toshiba laptops are affected. +
  More details on how to deal with this issue, you will find

  Welcome them

• An email I wrote has completely disappeared; In addition, "saved" elements disappear

  I looked in all the folders on the computer - I have lost all that email that has an important report

  You use Windows Mail? If you want to create a long message once you start out X or Ctrl + S for save in the drafts folder. Continue to write here and every few sentences or so, either click on file | Save or Ctrl + S to update what is recorded. If you come to open a new message window and type your message and who disappears it are gone for good. Even as if you were typing in Word, you have to save him.

  What is a saved items?

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Windows Vista has completely disappeared from my laptop. Now I have no start button, or all the icons? Oh I get it back?

  I got a box to say that he had a problem, so I clicked on OKet now vista disappeared from my laptop. I can still access my e-mails and the internet, but have no start button, or the bits of information like the battery, login etc. information time.

  Any help on how to get all them would be greatly appreciated.

  You are taskbar can have dissappeared. To see if it is still active, try pressing your keyboard Windows key (looks like this:). If the boot menu appears, your taskbar just hides. Answer with the info on what happened.

  Rifdhan

• Optical correction completely disappeared from the develop Module function

  The lens correction feature brought missing in the develop Module.  He was missing until I upgraded to 5.6 and is still missing.  Previously, he was present, so I wonder if I did something to hide or remove?

  Right-click on one of the other titles, such as base etc, tone curve. Make sure that there is a check mark in the lens corrections. This is the way you control which develop features that you want to display on your system. Sometimes the features disappear mysteriously.

• Web site works in mode live view but the actual site it has completely disappeared after making a few changes.

  I've had my site using dreamweaver for about a year now. I used the program of "Spectator" in my Gallery for images. However lately I have been having update problems and change the images. So yesterday I set up a gallery with the "lightbox" dreamweaver widget. Everything works well in mode live view in dreamweaver, but when I put the site to my domain now totally disappeared. It seems that the site is still in train poster linking to the simpleviewer Gallery, but there is no evidence, just a blank page. I don't know what is happening here. Through my Web host customer support has been useless.  My site is

  www.ryancomptonart.com

  CORRECTION: I found the correct code in styles.css. The problem is solved

• My tool bar has completely disappeared, and pressing F10 or ALT or the two together doesn't matter.

  Also, sideways on the page margins became broader - do not know if the two are related.

  Could you make sure that Firefox is not in his view "full screen"? On Windows, you should be able to exit the full screen using either:

  • F11 key (this screen full switches on and outside)
  • Drag the pointer of the mouse to the top of the screen, try a few points if necessary and the toolbar area must roll down, then either:
    • Click on the "3-bar" menu button and full screen
    • Right click > exit full screen

  Does it work?