Art hung on the editing table

Similar Questions

• The editing table came suddenly on some pages in my doc?

  In a doc of 80 pages, the editing table came on the page, but only on about a third of the pages? Thus, when it has, it affects the zoom shortcuts, i.e. zoom at the editing table has no effect, because the entire area is a big box!

  Problems of cardboard are usually cured by a journey through .idml see remove minor corruption by exporting

  If this does not fix it we're going to need some screenshots and version ID and your operating system.

• Restore the value of the selected line in the editable Table.

  Hello, I use Jdeveloper 11.1.2.1.0.
  
  My problem is:
  1. Select a line in the editable table.
  2. change the value inside elements of the af:inputText of columns.
  3. tap on restore.
  4. the values of the selected line remains the same.
  
  If I select another line, before the restore, the restore will work as expected.
  
  I want to when you press the button cancel the values of the selected row to be rollback-ed as well.

  Set the immediate on all the inputTextFields in the table and it worked.

  Thank you.

• You can create a datamerge at the editing table?

  Using InDesign CS5 is anyway that you can create a datamerge at the editing table?

  I want to place the file number in the section of purge for the series of newspaper advertisements. When I try to create a merged document, I am informed that there are no placeholders are present even if I added in the mount table.

  Someone at - it solutions?

  When you configure the placeholder, set the text to get to the bottom of the text box and stretch the text box so that it touches the print area of the page.

• Can you do the editable table width in a model

  I am new to html and try to use a template to create a site that will eventually 10-12 pages. All pages will have the same basic design, but some need 1 main body section and some need 2 (1 primary and 1 smaller stop on the side). After 4 pages, I realized that I could use a template so I wouldn't get again all the links in the navigation bar, etc., but if I make a page with just a main section, I'd like to that article is wider. The model, I cannot adjust the table. Is there a way to make the table width editable and adjustable? Thanks for any help you can give me... I'm sure to have many more questions, once this is resolved!

  > OK, so I'm experimenting with a few tutorials and do reading on
  > CSS
  > and I decided to start over and make the site from the ground up with
  > CSS.

  Be prepared to spend the time and effort that this decrease will need.

  > My new question is this: can I use
  > 2 different CSS for the same site?

  Definitely.

  > I would use 1 for pages requiring a
  > column of text and 1 for pages requiring 2 columns. Or is it
  > a
  > allowing to vary the width of the table directly in the CSS?

  Yes and Yes. You can do this with a second linked external CSS file or with
  a single CSS file link and a sheet of style incorporated, or with a single
  linked CSS file and descendant selectors, eg.

  
  

  
  ....
  
  

  or

  
  

  
  ...
  
  

  using CSS like this-

  #oneColumn table {width: 760px ;}}
  #twoColumn table {width: 400px ;}}

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "AH_Nancy" wrote in message
  News:evr56n$7ii$1@forums. Macromedia.com...
  > OK, so I'm experimenting with a few tutorials and do reading on
  > CSS
  > and I decided to start over and make the site from the ground up with
  > CSS. I have
  > think that it will be more work at the beginning (and a better result to the)
  (> end)
  > but less work later... at least I hope. My new question is this: what can I
  > use
  > 2 different CSS for the same site? I would use 1 for pages requiring a
  > column of text and 1 for pages requiring 2 columns. Or is it
  > a
  > allowing to vary the width of the table directly in the CSS?
  >
  > Thanks again for your help.
  >
  > Nancy
  >

• ID (CS6) reliable crashes when you move the point to the mount table

  To prepare a new version of a large document (220 pages letter, 350 patterns), I started to spend all the diagrams at the editing table. It worked well until at some point (say 40 pages or almost) ID crashed during this operation. After recovery I could go on for a few pages, but now I am in the situation that I can't go on more. Whenever I move a frame at the editing table, ID crashes.

  I tested with OS X 10.8 and OS X 10.10.

  What I try to go beyond this problem?

  Try to move pages to a new document.

• My editing table is really big

  Hello world

  I don't know what I did!  The editing table InDesign used to end a few inches from the edges of each broadcast, and later, it became really large (maybe 4 x the size of the spread?).  It takes forever to scroll, and it is difficult to maintain continuity with this big enough instruction book I've created.

  Fortunately, all of the graphic objects and text are still in place.  It is simply annoying.  Hope someone can help me to get things to look as they did.

  Thank you

  ceilr

  - http://indesignsecrets.com/changing-the-size-of-the-pasteboard.php lists a few solutions. It seems different things work for different people.

• Editable table automatically updated after the entry line

  Hello

  JDev 11.1.2.4

  In a table of clickToEdit, the editable line has several selectOneChoice and inputText. When the user changes a value in the editable field, the line is automatically updated. The problem is that if a user changes the first field and press tab, because the row is updated, the focus is lost.

  Why the whole line is updated?

  Thnaks

  Go to pageDef and iterator ChangeEventPolicy value = 'none '.

• tables model moving in the edition of editible regions

  Hi there everyone,

  Have made a model. When you do not pages from the model and then by changing the editible regions, the tables are shifing and not return to place of origin, even when I click here and there to see if they will go back. Sometimes the paintings returned to the original location and other times they do not.

  Made sure when make editable regions as td and another table code is not included in the editible regions.

  What I'm asking is when make you a model, if the table code is not included in the editable regions, should orient themselves around tables?

  What do you think?

  All solutions?

  Thanks a lot to you all,.

  Hope

  You misunderstood, I use templates all the time, I do not use its tables too much more, but you seem to have a mistake here. You have completed your and started yourbut havea link and some css in there, which would cause problems.

  
  

  and there still

  
  
  

  I think the biggest problem seems to be that you have regions editable on the tables overlap.  I think that if you finished a table and the end of an editable region started your editable region and then started with a table charge, it must stay as you want, but since the tables is all interconnected, moving a line splitter or neck causes them all to move...

  The best solution, see if you can get out of the structure of the table and work with

  Tags

  Gary

• Table of contents for the edition of ePub paragraph style

  I am trying to figure if InDesign can allow us to the editor the dynamic table of contents. What we have is essentially the following:

  Chapter number (single paragraph style)

  Chapter title (single paragraph style)

  First paragraph (single paragraph style)

  We want that the ToC that gets pulled up in an eBook reader to show this:

  Chapter 1: Chapter title

  Chapter 2: Chapter title

  At present, only InDesign appears to export each as a specific paragraph style, without setting them on the same line side by side. We're stuck with:

  Chapter 1

  Chapter title

  Chapter 2

  Chapter title

  Does anyone know of a way to export the ePub is what we want rather than this broken hirarchically way?

  There is no good way to do it. We must either go to the ePub after export, or change the style, so there's a return between the chapter number and chapter title instead of a return. The second option will involve completely restyling, and get in there colon will be delicate.

• Any way to edit tables in Textedit or Bean?

  Hello

  I used to use LibreOffice as my preferred burning software but I have questions of sensory processing, strobe and migraines, so I need to ripheriques in order to avoid painful flashing cursors. The demo Pages and NeoOffice, OpenOffice have similar flashing cursors. TextEdit and Bean allow users to turn off blinking cursors if we used the terminal hack to change their schedule.

  Unfortunately, I can't change the tables in Textedit and the bean. I can add or delete rows and columns at the end, but not between existing lines, and I can't copy and move a block of existing lines either.

  Can anyone suggest a way to edit tables in Textedit or bean or other compatible software without flashing cursors?

  My latest project docs are odt and my next will probably be in rtf.

  Thank you!

  (display using OS X El Capitan and crossposting to accessibility because the flashing is a Visual accessibility issue, at least for me).

  Right click-> add a line above works now at the bean. Nothing like it in Textedit.

• Firefox 4 ignoring the property table (< td > < table >)

  I'm working on the upgrade of the https://addons.mozilla.org/en-US/firefox/addon/156940/ for Firefox 4 compatibility extension.

  Essentially extensions improves the site by adding a few query fields that are locked in the format "table > < td > <. There is no problem up to FF 3.6.9. But at 4 FF, it ignores the < td > < table > properties.

  But it works with any questions on the latest versions of chrome and safari

  This is because the code is wrong.
  
  You're lucky it works in Firefox 3.6, but Firefox 4.0 is more strict.

  You try to add items TD to the innerHTML of an another TD element and it does not work.

  <td id="navSearchBar" class="navSearchBar">Search</td>

  You need to add < table > < / table > around code.

  This code should work:

  			if (lsa[0] == "jp")
  			{
  				searchTxt = "<table><td style=\"font-weight:bold; font-size:13px; padding-right:5px;\"><span style=\"float:left; width:28px;\">" + searchTxt + "</span></td>";
  			}
  			else
  			{
  				searchTxt = "<table><td style=\"font-weight:bold; font-size:13px; padding-right:5px;\">" + searchTxt + "</td>";
  			}
  			if (lsa[0] != "ca")
  			{
  				searchTxt += "<td style=\"padding-left:3px;\"><select id=\"p_76\" name=\"p_76\"><option value=''>Any<option value='1'>Prime<option value='1-'>Free</select></td>";
  			}
  			searchTxt += "<td style=\"padding-left:3px;\"><select id=\"pct-off\" name=\"pct-off\"><option value=''>0-100% <option value='10-'>10% <option value='20-'>20% <option value='30-'>30% <option value='40-'>40% <option value='50-'>50% <option value='60-'>60% <option value='70-'>70% <option value='80-'>80% <option value='90-'>90%</select></td></table>";
  			searchObj.innerHTML = searchTxt;
  

  (corrected the text that got deleted by a previous edition)

• generate the subset of the decimal table to an array of Boolean

  I have a decimal table 1 2 3 4 5 6, and I have a boolean with the same table size 0 1 0 1 1 0.

  How can I retrieve the subset of the decimal table of the corresponding "1" position of the table of Boolean (in this case 5 4 2)?

  The value of the Boolean table are editable (casting either 1 00100), so the size of the array decimal subset is not fixed (1, 4).

  (I assume you mean digital Board. "Décimal" is just a specification of formatting and irrelevant for this)

  Try something like the following (the FALSE case has just wired table in the whole unchanged):

  

  (In case you're dealing with huge paintings, a few performance modifications should be made so that everything goes more in place.)

  (Sorry for the spelling errors, ignore them )

• Remove the entry from the ARP table

  I need to create a program to remove an entry in the ARP table in Windows 7 with LabVIEW and TestStand.  The test that I develop contacts ESA via Ethernet.  Each HAD has the same IP address at the beginning but different MAC addresses.  I note that there may be long delays in test is running when you try to connect and remove the previous entry in the ARP table seems to help.  But now I have to do it manually through the command line.  The command 'arp d' requires elevated privileges.  I had a hard time getting LabVIEW to raise the system exec.  Does anyone have an ideas? Is there a .NET access to the ARP table?

  Thank you

  Paul

  I'll try to look into ARP sync settings setting in Windows.

  We have suffered from various problems of connection-performance TCP a few years ago and our solution was to change the default number of TCP sockets and delays (we knew port exhaustion). The tweeks eliminated most of our problems, no changes to code LV/TS not required.

  I tried to find info on ARP parameters for Windows 7, but it seems that there is much less info available that ther is for XP.

  Key words of the most common registry for older versions of Windows have been 'ArpCacheLife' and 'ArpCacheMinReferencedLife.

  EDIT:

  These parameters were apparently kidnapped in Vista. I found this on the site of $ M; they can apply to later versions, as well as M$ is a request for change to the management of the ARP...

  http://support.Microsoft.com/kb/949589

• Vertical scroll bar in the control table

  I use CVI 2012 and using a table control in the editor of the IUR. I started with a table containing 27 rows and 5 columns. The Panel container was large enough to display all the rows and columns, so without scroll bars have been necessary. Then I added more than 14 rows in the table, and a vertical scroll bar appeared on the right edge of the table. «By default, she marched to the bottom of the table, and I tried to change this up by changing"line 41 / 41" to "line 1 / 41" in the editor of the IUR.» He put back the first lines of the table, but the bar scroll also disappeared and I can't seem to restore, even if the table has more lines that can be displayed in the Panel containing.

  In dialog box "Edit Table" editor of the UIR, in the field of the 'appearance of control', the ' scrollbars: ' control has the value ' both scroll bars. I tried a number of combinations in the dialog "Options for size/Scroll...". "so - nothing seems to restore the scroll bar.

  I will attach the UIR file where this is useful. Interest table is the tool 'ID' tab thanks in advance!

  Barry Wealand

  I figured this out. Somehow, the width of the table control had also grown, such as the vertical scroll bar was pushed out the Panel on the right. By adjusting the size of the control so that the width of the table fits once more in Control Panel that contains the scroll bar appears once more.

  Barry Wealand