As soon as I turn on the computer, I get a scroll bar horizontal and below it say Microsoft Corporation. It takes just scroll and never open

Similar Questions

• When turned on the computer he get an error message ' missing < root windows > \system32\ntoskrnl.exe.

  Hi, I replaced the motherboard in my computer, it seems to work very well, but when you turn on the computer I get an error message:

  \SYSTEM32\NTOSKRNL.exe is missing or damaged

  At this stage there is no cursor, or what I can do to get in my area on my drive, it's as if the computer shuts down and this message does not disappear.

  I am running Windows XP operating system.

  Is there a solution for this?

  Thank you

  Hello

  · What is the number and the model of the computer?

  · What is the service pack installed on the computer?

  Follow the steps in the link below and check if this can help: error message: "Windows did not start because of a configuration of the disk of the computer problem": http://support.microsoft.com/kb/314477

• When I turn on the computer, I get this message - COM + Event System has stopped working. How can I activate this return?

  I had virus protection total defence installed. This occurred immediately after.

  Hello

  Thanks for your answer to my question. I was about to start step 2, by performing a boot minimum when a message pops up informing that 2 programs were slowing down my computer and also to stop because they were also running. Ironically, these programs I've ever used has appeared on my computer advertising protection against viruses and to speed up the computer.

  I did not purchase the license if it comes to start up all the 3 or 4 days telling me that my computer is slow.

  I uninstalled both programs, which I won't mention for obvious reasons and the event system Com + message did not return after the computer has restarted 3 times. Apparently, the problem has been resolved, but I will continue to have oversight. If the problem returns I'll restart and inform you about the results.  Thanks again for your expertise. guavaridgemb

  Thanks for posting your question in the Microsoft Community.

  I understand that when you turn on the computer, you get an error message indicating that COM + has event system stopped working. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  Please follow the steps and check the question below:

  Step 1:

  Check the event viewer for the logs of error from the links below.

  Open Event Viewer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  What are the information in event logs? (Event Viewer):

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

   

   

  Step 2:

   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

   

   

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Step 3:

   

  Scan your computer by using the Microsoft Safety Scanner by clicking Download now to check if there is no virus infected:

  http://www.microsoftsafetyscanner.com/

   

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

   

• When I turn on the computer, I get a request a password - I do I get rid of this?

  I have never had a password to turn on the computer - now I get a message to enter a password.  I do not have a password, I just hit enter.  How can I get rid of this prompt to enter a password?

  Hey Elena,

  You must activate your home screen, click Start-> settings-> Control Panel-> user account-> change the way users log on or off-> select enable to:

  Use the Welcome screen and use Fast User Switching-> Ok.

  I hope this helps.

• When I turn on my computer, I get a blank black screen and must disable it again.

  When I turn on my computer, I get a blank black screen. Then, I turned off the computer and turned it back and a message says turn on in safe mode, safe mode with networking, or safe mode with command prompt.  I turned on in safe mode with network, then I got a message saying check your network settings or material in your control panel, but I don't know what to check. Then I did a system restore to an earlier date. Everything was well computer works well again. Then when I turned on my computer this morning the same thing again. I did the same restore to an earlier date and then was able to use my computer. Someone at - it ideas why this happened? the computer worked fine until two days ago. I use windows xp home addition.

  Hi jantravis,

  ·         There were no significant changes made on the computer before the show?

  ·         Have you installed new software, hardware or Windows updates?

  ·         You get any message on the computer when the problem occurs?

  ·         What is the exact message that you receive in safe mode?

  Check to see if this article helps you.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

• locked out since my live account, went into the forum to get a discount from scratch and never had

  my child had caps lock on what signing me in so locked my windows live account, icreated another account so I could SecurityCenter and must fill out a lot of details to prove his my account then given a code to enter a temporary private forum. received the link in my new account, entered my code and then msg left and details. Then, I received a msg in the forum that my details have been varified and they sent me a link for resetting my new account for my old man. I didn't wait until nxt day n still no msg so I went bk in the forum n responded by saying em it, it is now 4 days that iv n had no response in return and no connection reset. fact no matter what I do

  Hi jaynemason,

  Since the problem is associated with the Windows Live account, you will need to wait for the response from the Windows Live support.

  Check out the link using Windows Live:

  http://windowslivehelp.com/product.aspx?ProductID=1

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer

• Configuring updates stage 3 of 3 0 full do not turn off the computer

  Got the scren then restart the pc "Configuring updates stage 3 of 3 0 full do not turn off the computer" and does not get the login screen. Every time when restarting the pc get the same error. Also not able to login in SafeMode also.

  Please provide the support for the same thing.

  You probably eventually turn off manually.

  Read this:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you have problems to restart, read on:

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And wonders about the updates of Windows:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, although wanting to tell them exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

  http://pcsupport.about.com/od/windowsvista/HT/nvistapassword.htm

  Info on the link above will help you.

  http://au.Dummies.com/how-to/content/set-up-passwords-in-Windows-Vista.html

  More info on including a password reset disc info.

  See you soon. Mick Murphy - Microsoft partner

• Restored my HP Pavilion to factory settings and now when I turn on the computer starts a recovery to start, then he can't find something wrong and want to do a system restore

  I have a HP Pavilion with Windows Vista.  Friday night, I restored the computer to the factory settings.  After doing what he started back to the top as usual and was very good.  I shut down my computer Friday night and then Saturday morning, when I turned on the computer screen to start Recovery came and when throught he process of trying to find errors and found nothing and then gave me a message at each stop or do a system restore.   Does anyone know why it would start this resumption of start after that I just restored it?   I'm ideas... Please help.

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=au

  You restored your computer for some reason any.

  And now you have problems after using the HP recovery process.
  It seems to me that you might have another problem inyour computer.

  Problem with HP Recovery Process(during or after), contact HP.

  It's Recovery process HP, not Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• I get a pop up as soon as I turn on my computer associated with utCompiledCoderecord

  Original title: utCompiledCoderecord

  This annoying pop up appears as soon as I turn on my computer. I can't uninstall uniblue

  Hello
  Here are our instructions on how to uninstall. If you this does not solve your problems, you can contact our support and they will walk you through it. http://www.Uniblue.com/support/ticket/
  Best regards
  Keith, Uniblue customer relations

  Manually remove the Uniblue programs.

  To remove your computer Uniblue products, always follow the uninstall procedure. File data deletion program without uninstalling the application can cause damage.

  Deleting the program files:

  By default, the program files data is in the following folder:

  C:\Program Uniblue

  Removal of application data:

  Click Start, select run and press ENTER. In the run box, type:

  %AppData%\protector.exe

  This will launch a window of the Explorer. Find and remove the Uniblue file.

  Remove the boot:

  1. click on start > run.

  2. type MSCONFIG and press enter (for Windows Vista and Windows 7, you can type this in the search box)

  3. click on the Startup tab.

  4. remove the check mark from the Uniblue product, then click apply and then click OK.

  5. a message appears telling you that you must restart your computer before these changes take effect. Click "Restart" and your computer restarts automatically.

  (When you log into Windows, you could get the system again Configuration utility box. Please close this window).

  Stop programs:

  1. right mouse click on the taskbar.

  2. in the context menu, select Task Manager.

  3. go to the tab "Processes", find and select registrybooster.exe/speedupmypc.exe/systemtweaker.exe/driverscanner.exediskrescue.exe (depending on which program you have), then click on end process.

• Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running.

  Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running. I can't enter to give more details. Can anyone help? There are a load of work due to deliver to the printing press Monday

  Have you tried to boot from the Partition Recovery and repair then the disc from there, using disk utility?

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you

• How can I get Firefox opens automatically whenever I turn on the computer?

  How to get Firefox opens automatically whenever I turn on the computer.

  You can place a shortcut to the Firefox program in the startup folder in "start > programs" by dragging the Firefox shortcut from the desktop or by dragging the Firefox entry in ' start > programs > Mozilla Firefox ' in this folder (or use copy/paste to achieve).

• Please help get the same message when I turn on the computer... on my mini hp 110 s/n CNU9440PW9

  I'm not sure what the name of the product is a don't know if it's the 32 or 64 bit, but when I turn on the computer, it pops up with an agreement that says enter current password one I tried some it could be a TI repeat me password verification failed... fatal error... missed are CNU9440PW9

  Hello

  Enter e9lovv12do (3rd character is a lowercase L)

  Kind regards

  DP - K

• by turning on the computer the sound wav plays always the value by default even if I changed my diet and renamed it

  When you turn on the computer default wav sound still plays even if I changed the system and renamed it

  Hello

  1. which version of the windows operating system is installed in the computer?

  2. have you made any changes to the computer?

  Method 1:

  If you use windows vista and windows 7, I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  Change the sounds of the computer

  http://Windows.Microsoft.com/en-us/Windows7/change-computer-sounds

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-computer-sounds