Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running.

Similar Questions

• Updated FF, stuck computer had to turn off the computer and now will not start.

  Toshiba Satellite PC running Windows 7.

  Received message there was an update for Firefox. Manually, clicked on it. After restarting the computer (as shown), I clicked on the Firefox shortcut icon and the Office froze. CTRL/Alt/Delete didn't work - nothing worked so forced the laptop turns off, press and hold the power button until it did.
  WAITED a few minutes and then turned the monitor never came to top - just stayed black. After a second attempt, that the computer turns on, the keyboard lights up but screen stays black. NO.
  problems before trying to update to Firefox.

  I write this on my Mac, as there's no way to use the PC with a black screen.

  Have you checked that the monitor is connected correctly and that all cables are connected entirely?

• Acer aspire 3820-7250 will no longer start. has frozen at startup, power off and now will not start.

  Windows 7 operating system.  tried system restore (all the recovery tools fail), tried the battery leaving aside all night, says now "no HDD found".  What should I do? What is wrong with him?  Should I try to boot from a USB key containing a boot file?  The big question is how can I recover my important files?

  Ok. Finally saved Rufus on desk, placed the iso HirensBootCD file on the desktop, used to burn it to a blank USB Rufus (by selecting the thumbdrive you want to use under "device", select "Partition for BIOS MBR scheme" for the partition scheme, select "FAT32" to the file, 64 k for "cluster size" system, then down 3 boxes must be checked.)  Make sure that you select "ISO Image" and click on the small icon next to make it burn your HirensBootCD.iso file, click Start, burn it, because of CD/HDD) then plugged the laptop thumbdrive is crushed, ensured he was set to boot from USB and good to go.  MiniXP selected and I'm now recover all my files from the HARD drive.   SO, this is the procedure to recover my data, thank God, but what is the solution permanently to repair the laptop?  He needs to have a new operating system installed?

• My new printer will not print on my Quicken reconcile report. It prints my program Word and e-mail very well.

  My new printer will not print on my Quicken reconcile report.  It prints my program Word and e-mail very well

  If I understand correctly your new printer (brand and model, please) is properly installed on your computer (version of Windows and the service pack, please), but does not print Quicken (version, please) reconciliation report.

  Without more information (such as an error message or description of what happens when you try to print), it sounds like all you need to do is to set up Quicken to use the new printer.  The following is for 2011 Quicken, but should be the same or similar for all recent versions of Quicken:

  Click file > printer setup > for reports/charts
  In the window that opens, select your new printer using the drop-down list.  You should keep the default margins and fonts.  Click OK and you should be good to go.

• Satellite Pro L10 will not start - green turns off after 3 seconds

  Hello

  Having a L10 (PSL15E-01J018EN) and when you press the button, the led ON / STANDBY on the front lights up green for about 3 seconds and then past off the coast. It accomplishes this task for the sector or on battery and there is no other life. Anyone know what may be the problem?

  Thank you

  Melv

  Hello Melv

  Remove the battery, connect your laptop to the power adapter only and try to turn on the L10. If this lets wait a few minutes and put the battery in place and watch if the laptop works as usual.

  Please let us know exactly what is happening.

• to turn off a computer that is no longer helping

  How to turn off a computer that is no longer serves to nothing, but in my iTunes account?

  Where is it registered? If article in the "manage devices" then does it have a button 'remove' next to him?

  If you reference the number of authorized computers on your account, with no access to the computer, you can only "deauthorise all ' (you can do only once every 12 months) and then allow the computers you always have: Deauthorize your computer using iTunes - Apple Support

• Turn off the bookmarks bar bulging feature automatically on the left side of the screen when you move the pointer to the left

  It's bothers me a lot, because I'm used to move the pointer to the left of the screen when I don't want to see it. Now, it increases the Favorites bar, which was not my intention. I checked all the options, but I couldn't turn it off. Maybe you can change to the code level?

  Thanks in advance!

  Sadowskim,

  Cancel Safari, bookmarks/favorites bar appears on the left side, if the cursor of the mouse is on the left. This link addresses the problem you describe.

  I suggest that you provide Safari comments describing your need for a user option.

  

• Palm TX will not start without being plugged in the AC adapter / CC & WiFi turned off completely during authentication device

  My daughter just got a Palm TX away two days ago.  I have 2 questions - we have plugged and loaded as described in the manual, but no matter what I do, it does not start when it is disconnected from the mains (first edition).  When you are connected to the wall, the unit seems to work correctly except for the WiFi, which causes the device to stop trying to autheticate on my network ((deuxieme question).  The only way I can get the unit to turn on once it has closed is with a soft reset while being plugged into the wall.  Once I have unplug the power cord, the device stops and does not start at all with a soft/hard reset either by the power button.  I did a full hard reset last night and let it charge again for 3 hours plugged into a different plug, but I still have the same issues.  Is there a fix or the update available that solves these problems?  Is my daughter S.O.L. because the device is obsolete and is no longer officially supported by Palm/HP?  Any help or idea would be greatly appreciated, thank you!

  Daddy geek

  Hello geekdad, sorry to hear about the TX problem.

  The TX debuted in 2005.  Your looks to the battery is dead for a long time and has other problems as well (Wifi kill him).

  There are websites that will fix Palm PDA, if you choose to do so.  DirectFix.com is one, palmdr.com one another.

  WyreNut

• Dell Precision T5400 will not start, turns off immediately

  Dell Precision T5400

  Xeon E5450 x 2

  32 GB of Ram

  Windows 7 Pro

  1 TB Seagate drive primary

  Backup WD 2 TB drive

  Rewritable DVD

  Floppy drive

  XFX Radeon HD 7850 2 GB

  PCI Firewire card

  These days it would be closed to chance especially when watching Youtube videos. I've recently updated my driver video so cancelled yesterday. This morning when I woke up, it was off, I let it run all the time so I knew that he was stopped again. I hit the power button, the power came a few seconds then turns off back. I tried several times with the same result. No beeps and I couldn't tell what were the diagnostic lights that you see in the video. I hit the power supply test button on the back and the LED is green indicating no power problem. I removed the RAM and just put 2 DIMM back in, tried a different video card. Removed the Firewire card. Removed the second CPU, swapped the second processor in place of the first. Reset the CMOS. I tried to unplug the hard drives, diskettes and optical. I monitor the temperatures of the last two days, inactive to 39 processors, but never greater than about 52C, the video card is idling to 36 c and will enter in the 1960s during the comparative analysis, but remains in the 1940s with regular use. I don't know what else to do. Here is a video of what he does.

  https://youtu.be/7eSLWWsU86s

  Thank you!

  As soon as the optical drive ejects, power supply is fine. Motherboard seems to be defective.
  Unfortunately there is no way we can stop losing windows. Installation of OEM disks do not have a product key during installation.

• How to turn off the zoom bar and the browser in interactivity?

  Hello

  I'm working on a project about I add interactivity in DPS. First, I create a basic code struture in HTML5, and after that I add it to a layer in DPS. Well, it works perfectly, but two problems arise:

  1. The navigation bar displayed when I touch the layer of interactivity.
  2. I can zoom in itself that I deny it with all scalable user as "none".

  How can I solve this problem? I'm really grateful for the help

  The code I use is:

  <! DOCTYPE html >

  < html >

  < head >

  < title > Test < /title >

  < meta charset = "utf-8" >

  < content meta =' width = device-width, minimum size = 1.0, initial scale = 1.0, maximum scale = 1.0, scalable user = no' name = 'window' / >

  < style >

  #container {}

  Width: 100%;

  height: 100%;

  background: url('imgs/bg.jpg') repeat;

  }

  < / style >

  < / head >

  < body >

  < div id = "container" > < / div >

  < / body >

  < / html >

  Well Yes, you are right. You need to decide what parts of your content that you want to have use touch gestures, and that you do not have. Then screw the handler only parts.

  Neil

• Satellite A660 will not start again until I turn safe mode

  Just buy the toshiba Satellite A660: I tell the story to compensate closely in my answer, I hope...

  I just buy new, run the Setup for first use. When its up and running only in that day, that I noticed it start to hang up when I plugged the drive external hard for some Installer (adobe lightroom).

  Its still very well, but when I disable it, it does not start again until I have run in safe mode so I can save some files and rerun recovery.

  This time on 64-bit. With its completion of its process, this works well for a few hours.
  He fell faster now, maybe because its on 64-bit? (any recommendation if its 32 or 64 bit) specifications: i5, 4ram, 1 g ddcatd graphics, family win7 premium,...

  Now when I turn it off it never early return time windows say... Startup Repair. ..
  I have let it run from this morning till now they can't always find what's the problem (I'm refernce the loptop).

  So no idea about whats goin?

  > He fell faster now, maybe because its on 64-bit? (any recommendation if its 32 or 64 bit) specifications: i5, 4ram, 1 g ddcatd graphics, family win7 premium,...

  64-bit operating system is better if your computer supports 4 GB or more of RAM.
  Why? Because 32-bit Win recognizes max 3.2 GB, even if more RAM is available.
  It's limitation of 32-bit; regardless of what OS it is; Linux, Win XP, Vista, Win7, etc.
  This is the reason why the 64 bit OS are so popular in the last time

  With regard to the issue of the BONE;
  I recommend that you run a disk recovery again... This means that you need to reinstall the OS usign the option recovery Toshiba;
  During the turning on the laptop press F8, choose fix my computer-> drive HARD recovery

• Dell XPS 12 - will not start / turns on after hard reset

  Last night I was with my XPS w12 in laptop mode on battery and he finally went down to 7% of the capacity.  At this point, it turns off the display and I moved my office to connect the power adapter (thinking it would simply turn the display when there was enough power...  The screen never came back (I waited 15-20 minutes), but the battery has been recharged.  At that time, I tried a hard reset by holding the power button for 5 to 10 seconds.

  When I tried to turn it on, nothing happened.  No backlit keyboard, no screen, just the fan.  The light never came the switch either. So I tried an another hard reset with the same results.  I even tried to turn it on with the "D" button held down for on board diagnostics and got nothing more than the start of the fan.

  I thought it might be an overheating problem, so I let it set for an hour and tried again - none other than the fan. It seems that the laptop does not pass the initial diagnosis and not even up to the point where the bios starts to load.

  I really thought that my cell phone was dead and ready for use.  I took it in the office the next day so I could call Dell Support Pro. Just for fun, I plugged with the AC adapter and tried to turn it on - viola!  It started working again.

  I had this problem once before, and he began to work after 2-3 resets hard. I was working on a proposal when the laptop went down. I tried reset hard over a period of 4 hours with no result. It baffles me why it start OK the next day morning.

  I was wondering if anyone else has had the same problem.  I am running the A07 BIOS (the most common) and my 12 XPS is configured with 8 GB of memory and 256 GB SSD with an i7 and Intel wireless card.

  Any suggestions on this diagnosis? The hardest part is then if fails, the failure is total - you are unable to diagnosis. When she comes back, all right, and there is than any event in the event log that relate to the failure.

  OK - I narrowed down it to the following:

  When the laptop is "asleep", it will finally in power mode. It seems that connect a power adapter for the laptop at this point will enter a State of confusion, when the button is pressed, the laptop fan turns on but no light on the power button or on the keyboard – the screen remains blank.  Laptop fan works (it is very quiet - he must hold the phone to your ear to hear it).

  I don't know if the cause is a low battery or if the issue is simply with the State of the CPU to power down.  All I know is that when it happens, if I disconnect the power adapter and press and hold the power button until the fan of the laptop turns off, the hard reset allows him to come back normally.  If you leave the adapter attached, it will charge the battery but will not allow the laptop start.

  I said this experiment several times with the same result every time. I'm guessing that there is a bug in the BIOS that defines an error state that are resolved with the associated power Board. Do the hard reset without the adapter seems reliable to fix the problem.

• iPod has stopped playing the music-now will not turn on / reset

  So I got this ipod as a month or two. The last of its kind in the store, except if I supposedly online. It's a 160 GB classic and it works fine so far. At all my 1500 songs on it so far and he was playing them very well yesterday. Put it on the charger, yesterday evening, and all of a sudden after I took it it stopped working. Tried to play a song about him and he just wouldn't it kept making a sound as he wanted to start up, but it didn't. Tried to change the song, in which case it was that, and he didn't play anything. Tried to reset it and by plugging it back into the computer and now it loads the apple logo, but he ends up to a screen with an o and an x in the Middle saying to go to apply the support... I don't know what to do I want just my ipod to work again :/ It won't even load on the charger more

  See iPod displays an icon 'X' Red - Apple Support. Apple may not have much interest in the classic iPod service. The line was removed some time ago. See also Re: corrupted iPod classic. You can try to get the stats, but my guess is that it will fail open player.

  TT2

• XW4400 does not start. Occurred after the power to the system off for 2 weeks. Now, does not start. Help!

  As noted above in the subject... exploded with power for about 2 weeks supply.  On his return the

  system won't start.  It keeps going in a circle.

  Here's what happens;
  

  (1) it goes to the window HP

  2) immediately goes to a window stating "windows did not start properly. A recent hardware or software change might be the cause. "Then on and other causes.  Well, none of them took place.

  To the bottom of the window there's several options to try.  Safe mode, Safe Mode Networking, last known successful... and start normally.  All the options have been tried several times.  To 30 sec timer waiting for your choice.  NONE OF THE OPTIONS WORK.  Cannot start in any mode.  After all of the selections it shows;

  (3) a flash of the microsoft windows screen and then we go back to number 1.

  Info on the system;

  XW4400

  • Manufacturer part number: ET115AV-CTO
  • Manufacturer: HP
  • Product description: ET115AV-CTO HP xw4400 Workstation computer desk
  • Product type: desktop
  • Form factor: mountable Convertible minitower on rack
  • Operating system: Windows XP Professional 64-bit
  • Processor: Core 2 Duo processor E6700 (2.66 GHz)
  • Front side bus: 1066 MHz front Bus up to
  • Chipset: Intel¿975 X Express
  • Memory: DDR - 2 667 MHz ECC unbuffered
  • Installed memory: 2 GB
  • Maximum memory: up to 8 GB
  • Installed hard drive: 160 GB
  • Hard drives: up to 4 SATA hard drives 2 to maximum
  • Expansion bays: 3 external bays of 5.25 inch and 1 external 3.5 inch bay 2-Bay internal 3.5-inch
  • CD DVD: 16 X DVD + - RW DL
  • Speed variators: controller 4 channels SATA 3 GB s integrated with RAID 0, RAID 1, RAID 0 + 1 capacity
  • Graphics card: NVIDIA Quadro FX1400
  • Expansion slots: graphics PCI Express (x 16) 1 slot 1 PCI Express (x 16 mechanically x 4 electrically) slots 1 PCI Express (x 1) and 3 long legacy PCI
  • Audio: Integrated high definition Audio with Jack Retasking capability,
  • Networking - communication: integrated Broadcom 5755 Netxtreme Gigabit PCIe LAN
  • I/o ports and connectors: front: headphone, microphone, 2 USB 2.0 and 1 optional IEEE 1394 a rear: 5 USB 2.0 1 USB 2.0 (internal) 1 serial port standard 1 keyboard PS-2 port 2 in parallel and mouse audio Gigabit LAN RJ-45 1 built-in audio microphone
  • I have no recovery disks!

  Hello:

  I can't help with your problem, because in this case, my recommendation would be to reinstall the operating system.

  What I can do, is give you information to get a set of recovery discs for your xw4400 for only $10 USD.

  Here's how:

  1. Enter the part number and the serial number on the top of the computer on the Silver label. The model # is a Compaq HP xw4400, but the part number is on this tag silver under the serial No.

  2. call HP at 1-800-952-7689, option 1 (ranking in the list in the option made restore disks).

  3. provide the information asked by the representative who answers the phone. Some simply ask for the serial No., some want at the same time, or they'll want just the serial number and the type of computer (xw4400).

  4. do you have a Master Card or Visa ready for purchase. They do not take discover. You will be charged $10.00.

  You will receive the discs by first class mail, or you can pay an additional $10.00 for shipping FedEx.

  Paul

• Where is my Firefox button? I tried to turn off the menu bar, but nothing helped. Win 7, FF 29

  Also curious to see how these things change on my computer without my wink. I realized there are necessary basic changes and other changes my mind of systems of operation and applications, but time to my characteristics are changed with no explanation and no real advantage to the person initiating the change (and without my knowledge, much less my consent).

  Yes, firefox automatically updates on a regular basis - but turn off in Advanced panel - accessibility, navigation, network, updates and other settings in advanced Firefox, I would strongly advise to do as updates contain usually also critical security patches and the integrity of your system and your personal data on it might otherwise be.