AS3 auto-move position then repeat

Similar Questions

• My internet connection is lost at home after a few minutes. I re - turn on the wifi disabled, ten and it works again for a few minutes and then repeats. It works fine everywhere else?

  Relatively new MacBook OSX El Cap 11.4

  My internet connection is lost at home after a few minutes. I stop the wifi, then turn it back on and it works again for a few minutes and then repeats. It works fine everywhere else?

  Please see recommended settings of WiFi routers and access Apple points.

  Despite these recommendations, some routers will work better with the latest Mac models if you turn the radio 2.4 GHz mode in settings and only use the 5 GHz. Note, however, that very old devices Apple and some third-party devices can then not connect at all.

  Some third party routers have advanced that you may need to change the settings:

  The encryption algorithm must be AES.

  The group key interval must be 3200.

  I can't give you specific instructions on how to change these settings, because all routers are different. Refer to the documentation for the provider.

• PC is a pause, click 3 times, runs 5 seconds and then repeat

  original title: PC BREAKS, CLICKS 3 TIMES, OPERATED 5 SECONDS AND THEN REPEAT

  XP OPERATING SYSTEM... PC STOPS, CLICK 3 TIMES, RUNS 5 SECONDS AND THEN REPEAT SEQUENCE. DO I HAVE A VIRUS OR ANOTHER ANIMAL?  NEVER MET HIM THIS BEFORE. Help, please!

  The BIOS question was to determine if it was a Windows only or PC problem.

  You really should try MBAM, too.

  There is still the process of elimination (once you're looking for malware). You can reactivate the half and then see what happens.

• I watch a movie, and then after 10 minutes or if the video is empty.

  I watch a movie, and then after 10 minutes or if the video is empty. How can I continue to see the video until it's over?

  I watch a movie, and then after 10 minutes or if the video is empty. How can I continue to see the video until it's over?

  Watch a movie about what?

  In other words - you look a the Internet via Netflix movie streaming?  A video streaming via Hulu?  A video that is saved on your hard drive?  A video that is stored on a shared network is accessible on your local network?  What is a DVD?   BluRay?  He plays using SilverLight?  Adobe Flash Player?  QuickTime?  RealPlayer?  Or something more local like WIndows Media Player or VLC?  Something else?

  I would like to say - in general...

  (1) uninstall all of the aforementioned Internet plugins.  Reset.  Download and install the latest versions (Adobe Flash Player, Microsoft SilverLight, Apple QuickTime, or RealPlayer).  Reset.  Try again.

  2) update your video card/device driver from the manufacturers of video cards and devices web page.  (You probably have a nVidia or ATI/AMD video card processor).

  (3) check the settings of your screensaver and Hibernate...

• where's my key windows live movie maker auto movie

  Where's my button windows live movie maker "auto movie?  I made several videos since obtaining my computer Windows 7 July 2001.  It was very easy to start with the "Auto Movie" button, but now it's gone!

  Click create, and the film should be,.

  It has been a while since you have used the program does not have it?

• A few years back, I bought CS5. because of my house having to repair my CS5 has been lost in the move. Then I had to take care of my mother who died later of cancer. I have now found my product, but the customer service person said that there is no newspa

  A few years back, I bought CS5. because of my house having to repair my Adobe CS5 has been lost in the move.  Then I had to take care of my mother who died later of cancer.  I have now found my product but the person said the customer service there is no newspaper of me purchase of the product.  I can't use the product that I bought because I don't have the registration code.  So could I please get a refund and I will return the edition teachers and students of CS5.  Thank you.

  @

  Quickly find your serial number

  Download the CS5 products

• AS3: ScrollPane component position and the scroll bar

  
  Hello:
  
  I use AS3 to import, add and fill a scroll bar with textfields. I want to position the vertical scroll bar on the left side rather than on the right side. How can I go about using AS3?
  
  I looked in these and other forums, not to mention the Flash help, nothing helps. If I'm missing something obvious, everyone is welcome to point out.. :)
  
  Thank you!
  
  Patrick

  Oh OK. If you want to adjust the position of the scrollbar in a ScrollPane component, it may be possible with a bit of work. only from some experiments, then, I found that you can refer to the vertical scroll bar in a ScrollPane with the verticalScrollBar property and this allows to move, with something like:
  scroller.verticalScrollBar.x =-20;

  However, you must wait to make content and scrollbars to become active before trying to move the scroll bar. I used the event 'added' as follows: (see attached the code below)

  the only problem is that the background of the scroll bar still exists, but you should be able to remove it with skins or fudge a chart on top of it to hide.

• Calendar AS3 with the position of the mouse control.

  Hi everyone, thanks in advance to the community for any help you might be able to offer, it's all the incredably appreceated.

  It is a problem which had scratching me my head for months and be a facilitator, was really stretching my AS3 skills a bit.

  I create an interactive story of sorts and what is needed is to use the horizontal position of the mouse to scroll forward or backward on a timeline that is, when the mouse is in the dead center of the stage that the playhead does not move, but once he deveates right centre of the read head moves forward and plays the animation and a Once it moves to the left the read head begins to move backwards.

  Ideally I would have an acceleration effect, where the animation scrolls while the timeline at a minimum speed when the mouse is always close to the Center but at a faster rate once it is reached the edges, but right now, it is a secondary concern.

  There are also keys to move through various scenes, I can code myself, I only mention this in case it affects the rest of the code.

  Thanks for you help and any solutions or navagating alternitive methods a timeline are welcome indeed

  I'll be sure to pass on the karma to an area im more familiar with.

  var mc:MovieClip = MovieClip (this);  //<- timeline="" you="" want="" to="" control="" with="" mouse="">

  var maxScrollSpeed:int = 100;  / s max for mc above

  var m:Number;

  var b:Number;

  var prevFPS:int;

  paramF(0,-maxScrollSpeed,stage.stageWidth,maxScrollSpeed);

  this.addEventListener (MouseEvent.MOUSE_MOVE, scrollF);

  function scrollF(e:Event):void {}

  var fps:int = Math.round(m*mouseX+b);

  {if(prevFPS&&prevFPS!=FPS)}

  {if(FPS!=0)}

  {if(FPS>0)}

  playF (mc, mc.currentFrame, mc.totalFrames, fps);

  } else {}

  playF(mc,mc.currentFrame,1,-fps);

  }

  } else {}

  stopF (mc);

  }

  }

  prevFPS = images/second.

  }

  function playF(mc:MovieClip,_m:int,_n:int,_fps:int):void {}

  var playFFF2:Function = {function(mc:MovieClip):void}

  If (mc.m

  mc.nextFrame ();

  } else {}

  mc.prevFrame ();

  }

  If (mc.currentFrame == mc.n) {}

  clearInterval (mc.int);

  }

  updateAfterEvent();

  };

  MC.m = m;

  MC.n = n;

  MC. FPS = FPS;

  mc.gotoAndStop (mc.m);

  clearInterval (mc.int);

  MC.int = setInterval (playFFF2, 1000/mc.fps, mc);

  }

  function stopF(mc:MovieClip):void {}

  clearInterval (mc.int);

  }

  function paramF(x1:Number,y1:Number,x2:Number,y2:Number):void {}

  m =(Y1-Y2) /(x1-x2);

  b = y1 - m * x 1;

  }

• Android Air As3 - jerky movement strategy Lag

  Hi, im new to this forum so please forgive me if I have a question in the wrong section.

  I have a problem with Android Air Performance when moving from a movieclip (interpolation) inside a movieclip to a strategy game.

  Let me explain what my structure looks like:

  I have a Movieclip named 'BG' 1280x720pixel preparing to drag Double click on the mouse event that works very well. Inside the BG movieclip, I have an another Movieclip called "Builder". The code below is the "constructor" to move. However, my problem is that when it moves on a Tween and I drag the movieclip "BG" at the same time, occurs a jerky movement.

  I tried to put the movieclip "Builder" in the same location on another layer than the movieclip "BG", by twisting the AS3 code and works fine but the manufacturer only moves from the stage and NOT in the BG movieclip.

  What I want is (located inside the BG movieclip) movieclip generator to move smoothly while being able to drag the BG movieclip at the same time. However it does not lag...

  CODE for the movement of generator:

  var targetX:Number;

  var targetY: number;

  var inTransit: Boolean = false;

  var speed: Number = 5;

  stage.addEventListener (MouseEvent.MOUSE_DOWN, mouse click);

  stage.addEventListener (Event.ENTER_FRAME, update);

  function mouseClick(e:MouseEvent):void

  {

  targetX = BG.mouseX;

  targetY = BG.mouseY;

  transit = true;

  }

  function update(e:Event):void

  {

  First check to see if we must move forward

  If (! transit | isNaN (targetX) | isNaN (targetY)) return;

  find the direction to the target

  var i: Number = targetX - BG.builder.x; x direction

  var j: Number = targetY - BG.builder.y; y axis

  Now let's see how close you are to the target

  If you're closer, then speed, then make sure that the amount of your change

  mag var: Number = Math.sqrt (I * i + j * j);

  var dif:Number = Math.min (mag, speed);

  If (dif < speed) in transit = false; turn off transit when you got it

  now make your direction a unit vector

  I / = mag;

  j / = mag;

  then multiply by your dif to get

  the speed of your object vector

  I * = dif;

  j * = dif;

  If (off = true) {}

  BG.builder.x += i;

  BG.builder.y += j;

  }

  }

  CODE FOR the event drag mouse 'BG ':

  BG.addEventListener (MouseEvent.DOUBLE_CLICK, fl_StartDrag, false, 0, true);

  BG.addEventListener (MouseEvent.MOUSE_UP, fl_StopDrag, false, 0, true);

  function fl_StartDrag(e:MouseEvent):void

  {

  OFF = false;

  e.currentTarget.startDrag (false, fl_DragBounds);

  e.currentTarget;

  counter = 1;

  BG.addEventListener (Event.ENTER_FRAME, updateCounter);

  }

  function fl_StopDrag(e:MouseEvent):void

  {

  e.currentTarget;

  e.currentTarget.stopDrag ();

  BG.removeEventListener (Event.ENTER_FRAME, updateCounter);

  }

  How can I do to fix the problem, and why is this problem or delay?

  Please forgive me as I'm new to Flash and still learn

  Thank you

  AlpaxJ1
  

  every object that has x, y of changes (and no other changes) should have its cacheAsBitmap property enabled.

  each object which undergoes additional changes (excluding the movieclips that change managers) must have its active cacheAsBitmap and its cacheAsBitmapMatrix assigned (usually at a new matrix())).

• Mounting clip auto adjustment position

  Hi guys,.

  I have a pretty simple question, and I'm sure it'll be a simple answer.

  I'm not sure what I've done, but so far I could cut a clip on the timeline and the clip after that it would automatically move at the end of the one I had just trimmed.

  Well, everything that I've done that has ceased, and I can't work for the life of me how to change it back.

  If anyone with a clue would like to comment below, it would be a great moment of sleep for me.

  See you soon!

  IF the clamps are connected clips they have no magnetism unless they are combined in a subplot, then they will behave as the main plot.

• After putting the pictures on slide show with movie maker, then try to burn it to cd sound telling me cd burner is not detected? !!

  Why would he keep telling me cd burner could not be detected when it is not installed as part of vista?

  Why would he keep telling me cd burner could not be detected when it is not installed as part of vista?

  ===========================================
  Might be interesting to try to publish (your project in the save WMV)
  video format and then use the following freeware to burn a
  Data CD. (If you want the disc to play on a DVD player you will be
  need different software)

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista-
  Quality profiles / editions
  http://www.Papajohn.org/Vista-publishing.html

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  CDBurnerXP
  http://www.CDBurnerXP.se/
  (Yes, it works on XP, Vista, 7)

  CDBurnerXP create data disc
  http://CDBurnerXP.se/help/data/compiledata
  (the green bar at the bottom of the screen
  turns red if you add too many files)

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• AS2 to AS3 conditional movie clip function

  I had an AS2 script which would have melted all clips of movie except the rolls more than one. I'm trying to implement this script in AS3, but I can't seem to make it work. Can someone please tell me where I'm wrong? Thank you!

  Here is the AS2 script:

  function alpha (obj) {}

  for (var i = 1; i < = 24; i ++)

  {

  if (obj._name! = 'p ' + i).

  {

  var box_tween:Object = new Tween (_root.port ["p" + i], "_alpha", Regular.easeInOut, 100, 40, 1, true ");

  { } else

  {

  obj._alpha = 100;

  }

  }

  }

  Here is my attempt to translate this to AS3:

  function onButtonOver(e:MouseEvent):void {}

  for (var i: Number = 1; i < = 4; i ++)

  {

  if (e.currentTarget! = 'p ' + i).

  {

  var enterTween:Tween = new Tween (["p" + i], "alpha", None.easeOut, 1,.4, 1, true);

  { } else

  {

  e.currentTarget.alpha = 1;

  }

  }

  You are welcome.

  Please check the answer, if you can.

• Quicktime movie playback then jump to a marker

  Hello
  
  Can someone tell me please how to do the following...
  
  I want to play a Quicktime movie, then blow it to a picture when you are done.
  
  Please see the attached code.
  
  Any help much appreciated.
  
  Andy
  
  

  Thanks, Aldus, works perfectly. Yes, I should have given a name of marker instead of a picture, thanks for pointing that out.

  Concerning

  Andy

• Highlight the current row in a listbox and auto control. position of the ScrollBar

  How can I automatically highlight the assets on line in a listbox control and automatically scroll the vertical scroll bar in the active position (last)?

  Thank you

  What of the attached amendment?

• KB2530548 installation problem - update seems to move, but then after he says: my computer has not been configured correctly

  Whenever I try to install KB2530548 it apears to install then subsequently it said my computer was not set up correctly, so it reverts to the previous settings. Did somebody solve this problem?
  
   

  Hi paul jabru,.

  Thanks for posting your question in the Microsoft answers Forum.

  Install the update in a clean boot State, try. This will eliminate any software conflict if that is what causes the update fails. You can also run a full scan with your antivirus. If necessary, you can use the free sanc provided by Microsoft Security Essentials.

  You can also check the integrity of your system files by running a scan SFC and the consistency of your hard drive by running chkdsk. For the chkdsk command, follow these steps:

  1. Restart your computer and immediately press the F8 key until you reach the Advanced Startup Menu of Options.
  2. In the menu, select Safe mode with command prompt.
  3. At the command prompt, type chkdsk/r (there is a space between the k and /)

  Before finishing the chkdsk command, as a precautionary measure, make sure you have a recent backup important data.