ASA 5505 VPN Ping problems

Hi all

First of all, I apologize if this is something that I can google. My knowledge of the administration of the network is all self-taught, so if there is a guide that I missed please point me in the right direction, it is often difficult to Google the terms for troubleshooting when your jargon is not the height.

The main problem is that when ping devices internal when you are connected to the results are very inconsistent.

Ping 192.168.15.102 with 32 bytes of data:

Reply from 192.168.15.102: bytes = 32 time = 112ms TTL = 128

Request timed out.

We have implemented an IPSec VPN connection to a remote Cisco ASA 5505. There is no connection problems, connection seems constant, etc. good packages. At this stage, I can only assume I have configuration problems, but I was watching this while if long and pair with my inexperience configuration of these settings I have no idea where to start. My first impressions are that LAN devices I'm ping do not send their response back or the ASA does not know how to route packets back?

Here is a dump of the configuration:

Output of the command: "show config".

: Saved

: Written by enable_15 to the 12:40:06.114 CDT MON Sep 9 2013

ASA Version 8.2 (5)

hostname VPN_Test

activate the encrypted password of D37rIydCZ/bnf1uj

2KFQnbNIdI.2KYOU encrypted passwd

names of

192.168.15.0 - internal network name

DDNS update method DDNS_Update

DDNS both

maximum interval 0 4 0 0

interface Ethernet0/0

switchport access vlan 2

interface Ethernet0/1

interface Ethernet0/2

interface Ethernet0/3

interface Ethernet0/4

interface Ethernet0/5

interface Ethernet0/6

interface Ethernet0/7

interface Vlan1

Description VLAN internal guests

nameif inside

security-level 100

DDNS update hostname 0.0.0.0

DDNS update DDNS_Update

DHCP client updated dns server time

192.168.15.1 IP address 255.255.255.0

interface Vlan2

Description of VLAN external to the internet

nameif outside

security-level 0

address IP xx.xx.xx.xx 255.255.255.248

passive FTP mode

clock timezone CST - 6

clock to summer time recurring CDT

DNS server-group DefaultDNS

Server name 216.221.96.37

Name-Server 8.8.8.8

permit same-security-traffic inter-interface

permit same-security-traffic intra-interface

DM_INLINE_TCP_1 tcp service object-group

port-object eq www

EQ object of the https port

outside_access_in list extended access permit icmp any one

outside_access_in list extended access deny interface icmp outside interface inside

access extensive list ip 192.168.15.192 outside_access_in allow 255.255.255.192 all

Remote_splitTunnelAcl list standard allowed internal-network access 255.255.255.0

inside_nat0_outbound list extended access allowed internal-network ip, 255.255.255.0 192.168.15.192 255.255.255.192

Note to inside_access_in to access list blocking Internet traffic

access extensive list ip 192.168.15.192 inside_access_in allow 255.255.255.192 all

Note to inside_access_in to access list blocking Internet traffic

inside_access_in extended access list allow interface ip inside the interface inside

inside_access_in list of allowed ip extended access all 192.168.15.192 255.255.255.192

Note to inside_access_in to access list blocking Internet traffic

access extensive list ip 192.168.15.192 inside_nat0_outbound_1 allow 255.255.255.192 all

pager lines 24

Enable logging

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

mask 192.168.15.200 - 192.168.15.250 255.255.255.0 IP local pool VPN_IP_Pool

inside_access_ipv6_in list of access allowed IPv6 interface ip inside the interface inside

ICMP unreachable rate-limit 1 burst-size 1

ICMP allow any inside

ICMP allow any response of echo outdoors

ICMP allow all outside

don't allow no asdm history

ARP timeout 14400

NAT-control

Global 1 interface (outside)

NAT (inside) 0-list of access inside_nat0_outbound

NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access

NAT (inside) 1 192.168.15.192 255.255.255.192

NAT (inside) 1 0.0.0.0 0.0.0.0

inside_access_in access to the interface inside group

inside_access_ipv6_in access to the interface inside group

Access-group outside_access_in in interface outside

Route outside 0.0.0.0 0.0.0.0 xx.xx.xx.xx 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

Enable http server

http 192.168.1.0 255.255.255.0 inside

255.255.255.0 inside internal network http

http yy.yy.yy.yy 255.255.255.255 outside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Sysopt connection timewait

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

life crypto ipsec security association seconds 28800

Crypto ipsec kilobytes of life - safety 4608000 association

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

outside_map interface card crypto outside

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

Telnet timeout 5

SSH timeout 5

Console timeout 0

management-access inside

dhcpd outside auto_config

dhcpd address 192.168.15.200 - 192.168.15.250 inside

dhcpd allow inside

a basic threat threat detection

Statistics-list of access threat detection

a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200

NTP server 192.168.15.101 source inside

prefer NTP server 192.168.15.100 source inside

WebVPN

internal remote group strategy

Group remote attributes policy

Protocol-tunnel-VPN IPSec

Split-tunnel-policy tunnelspecified

value of Split-tunnel-network-list Remote_splitTunnelAcl

username StockUser encrypted password privilege 0 t6a0Nv8HUfWtUdKz

username StockUser attributes

Strategy-Group-VPN remote

tunnel-group type remote access remotely

tunnel-group remote General attributes

address pool VPN_IP_Pool

Group Policy - by default-remote control

tunnel-group remote ipsec-attributes

pre-shared-key *.

class-map inspection_default

match default-inspection-traffic

type of policy-card inspect dns preset_dns_map

parameters

maximum message length automatic of customer

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

Review the ip options

inspect the icmp

global service-policy global_policy

context of prompt hostname

no remote anonymous reporting call

Cryptochecksum:f4271785b86e45dd3a17bab8f60cd2f3

Hi Graham,

My first question is do you have a site to site VPN and VPN remote access client.

After checking your configuration, I see you don't have any Site to SIte VPN configuration, so I'm assuming you ara facing issue with the VPN client.

And if I understand you are able to connect VPN client, but you not able to access internal resources properly.

I recommend tey and make the following changes.

First remove the following configuration:

NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access

NAT (inside) 1 192.168.15.192 255.255.255.192

You don't need the 1st one and I do not understand the reason for the second

Second, one is your pool IP subnet (192.168.15.200 - 192.168.15.250) and I don't know why you added this NAT.

If possible change your subnet pool all together because we do not recommend to use th ip POOL that is similar to your local network.

Try the changes described above and let me know in case if you have any problem.

Thank you

Jeet Kumar

Tags: Cisco Security

Similar Questions

Problem with ASA 5505 VPN remote access

After about 1 year to have the VPN Client from Cisco connection to an ASA 5505 with no problems, all of a sudden one day it stops working. The customer is able to get a connection to the ASA and browse the local network for only about 30 seconds after the connection. After that, no access is available to the network behind the ASA. I have tried everything I can think of to try to solve the problem, but at this point, I'm just banging my head against a wall. Anyone know what could cause this?

Here is the cfg running of the ASA

----------------------------------------------------------------------------------------

: Saved

:

ASA Version 8.4 (1)

!

hostname NCHCO

enable encrypted password xxxxxxxxxxxxxxx

xxxxxxxxxxx encrypted passwd

names of

description of NCHCO name 192.168.2.0 City offices

name 192.168.2.80 VPN_End

name 192.168.2.70 VPN_Start

!

interface Vlan1

nameif inside

security-level 100

IP 192.168.2.1 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

IP address **. ***. 255.255.255.248

!

interface Ethernet0/0

switchport access vlan 2

Speed 100

full duplex

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

boot system Disk0: / asa841 - k8.bin

passive FTP mode

network of the NCHCO object

Subnet 192.168.2.0 255.255.255.0

network object obj - 192.168.1.0

subnet 192.168.1.0 255.255.255.0

network object obj - 192.168.2.64

subnet 192.168.2.64 255.255.255.224

network object obj - 0.0.0.0

subnet 0.0.0.0 255.255.255.0

network obj_any object

subnet 0.0.0.0 0.0.0.0

the Web server object network

the FINX object network

Home 192.168.2.11

rdp service object

source between 1-65535 destination eq 3389 tcp service

Rdp description

outside_nat0_outbound extended access list permit ip object NCHCO 192.168.1.0 255.255.255.0

outside_nat0_outbound extended access list permit ip object NCHCO 192.168.2.0 255.255.255.0

inside_nat0_outbound extended access list permit ip object NCHCO 192.168.1.0 255.255.255.0

inside_nat0_outbound list of allowed ip extended access all 192.168.2.64 255.255.255.224

permit access list extended ip 0.0.0.0 inside_nat0_outbound 255.255.255.0 192.168.2.64 255.255.255.224

outside_1_cryptomap extended access list permit ip object NCHCO 192.168.1.0 255.255.255.0

outside_1_cryptomap_1 extended access list permit ip object NCHCO 192.168.1.0 255.255.255.0

LAN_Access list standard access allowed 192.168.2.0 255.255.255.0

LAN_Access list standard access allowed 0.0.0.0 255.255.255.0

NCHCO_splitTunnelAcl_1 list standard access allowed 192.168.2.0 255.255.255.0

AnyConnect_Client_Local_Print deny ip extended access list a whole

AnyConnect_Client_Local_Print list extended access permit tcp any any eq lpd

Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol

AnyConnect_Client_Local_Print list extended access permit tcp any any eq 631

print the access-list AnyConnect_Client_Local_Print Note Windows port

AnyConnect_Client_Local_Print list extended access permit tcp any any eq 9100

access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol

AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.251 eq 5353

AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol

AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.252 eq 5355

Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print

AnyConnect_Client_Local_Print list extended access permit tcp any any eq 137

AnyConnect_Client_Local_Print list extended access udp allowed any any eq netbios-ns

outside_access_in list extended access permit tcp any object FINX eq 3389

outside_access_in_1 list extended access allowed object rdp any object FINX

pager lines 24

Enable logging

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

mask of VPN_Pool VPN_Start VPN_End of local pool IP 255.255.255.0

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm - 649.bin

don't allow no asdm history

ARP timeout 14400

NAT (inside, all) static source NCHCO destination NCHCO static obj - 192.168.1.0 obj - 192.168.1.0

NAT (inside, all) static source any any destination static obj - 192.168.2.64 obj - 192.168.2.64

NAT (inside, all) source static obj - 0.0.0.0 0.0.0.0 - obj destination static obj - 192.168.2.64 obj - 192.168.2.64

!

network obj_any object

NAT dynamic interface (indoor, outdoor)

the FINX object network

NAT (inside, outside) interface static service tcp 3389 3389

Access-group outside_access_in_1 in interface outside

Route outside 0.0.0.0 0.0.0.0 69.61.228.177 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

dynamic-access-policy-registration DfltAccessPolicy

network-acl outside_nat0_outbound

WebVPN

SVC request to enable default svc

Enable http server

http 192.168.1.0 255.255.255.0 inside

http *. **. ***. 255.255.255.255 outside

http *. **. ***. 255.255.255.255 outside

http NCHCO 255.255.255.0 inside

http 96.11.251.186 255.255.255.255 outside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

Crypto ipsec transform-set esp-3des esp-sha-hmac ikev1 l2tp-transform

IKEv1 crypto ipsec transform-set l2tp-transformation mode transit

Crypto ipsec transform-set vpn-transform ikev1 esp-aes-256 esp-sha-hmac

Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA ikev1

transport mode encryption ipsec transform-set TRANS_ESP_3DES_SHA ikev1

Crypto ipsec transform-set esp-3des esp-md5-hmac TRANS_ESP_3DES_MD5 ikev1

transport mode encryption ipsec transform-set TRANS_ESP_3DES_MD5 ikev1

Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

crypto dynamic-map dyn-map 10 set pfs Group1

crypto dynamic-map dyn-map 10 set transform-set l2tp vpn-transform processing ikev1

dynamic-map encryption dyn-map 10 value reverse-road

Crypto-map dynamic outside_dyn_map 20 set transform-set ESP-3DES-SHA ikev1

Crypto-map dynamic outside_dyn_map 20 the value reverse-road

card crypto outside_map 1 match address outside_1_cryptomap

card crypto outside_map 1 set pfs Group1

peer set card crypto outside_map 1 74.219.208.50

card crypto outside_map 1 set transform-set ESP-3DES-SHA ikev1

map outside_map 20-isakmp ipsec crypto dynamic outside_dyn_map

outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

outside_map interface card crypto outside

inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

inside crypto map inside_map interface

card crypto vpn-map 1 match address outside_1_cryptomap_1

card crypto vpn-card 1 set pfs Group1

set vpn-card crypto map peer 1 74.219.208.50

card crypto 1 set transform-set ESP-3DES-SHA ikev1 vpn-map

dynamic vpn-map 10 dyn-map ipsec isakmp crypto map

crypto isakmp identity address

Crypto ikev1 allow inside

Crypto ikev1 allow outside

IKEv1 crypto ipsec-over-tcp port 10000

IKEv1 crypto policy 10

preshared authentication

3des encryption

md5 hash

Group 2

life 86400

IKEv1 crypto policy 15

preshared authentication

aes-256 encryption

sha hash

Group 2

life 86400

IKEv1 crypto policy 35

preshared authentication

3des encryption

sha hash

Group 2

life 86400

enable client-implementation to date

Telnet 192.168.1.0 255.255.255.0 inside

Telnet NCHCO 255.255.255.0 inside

Telnet timeout 5

SSH 192.168.1.0 255.255.255.0 inside

SSH NCHCO 255.255.255.0 inside

SSH timeout 5

Console timeout 0

dhcpd address 192.168.2.150 - 192.168.2.225 inside

dhcpd dns 216.68.4.10 216.68.5.10 interface inside

lease interface 64000 dhcpd inside

!

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

WebVPN

internal DefaultRAGroup group strategy

attributes of Group Policy DefaultRAGroup

value of server DNS 192.168.2.1

L2TP ipsec VPN-tunnel-Protocol ikev1

nchco.local value by default-field

attributes of Group Policy DfltGrpPolicy

value of server DNS 192.168.2.1

L2TP ipsec VPN-tunnel-Protocol ikev1 ssl-clientless ssl-client

allow password-storage

enable IPSec-udp

enable dhcp Intercept 255.255.255.0

the address value VPN_Pool pools

internal NCHCO group policy

NCHCO group policy attributes

value of 192.168.2.1 DNS Server 8.8.8.8

Ikev1 VPN-tunnel-Protocol

Split-tunnel-policy tunnelspecified

value of Split-tunnel-network-list NCHCO_splitTunnelAcl_1

value by default-field NCHCO.local

admin LbMiJuAJjDaFb2uw encrypted privilege 15 password username

username privilege 15 encrypted password yB1lHEVmHZGj5C2Z 8njferg

username NCHvpn99 password dhn. JzttvRmMbHsP encrypted

attributes global-tunnel-group DefaultRAGroup

address (inside) VPN_Pool pool

address pool VPN_Pool

authentication-server-group (inside) LOCAL

authentication-server-group (outside LOCAL)

LOCAL authority-server-group

authorization-server-group (inside) LOCAL

authorization-server-group (outside LOCAL)

Group Policy - by default-DefaultRAGroup

band-Kingdom

band-band

IPSec-attributes tunnel-group DefaultRAGroup

IKEv1 pre-shared-key *.

NOCHECK Peer-id-validate

tunnel-group DefaultRAGroup ppp-attributes

No chap authentication

no authentication ms-chap-v1

ms-chap-v2 authentication

tunnel-group DefaultWEBVPNGroup ppp-attributes

PAP Authentication

ms-chap-v2 authentication

tunnel-group 74.219.208.50 type ipsec-l2l

IPSec-attributes tunnel-group 74.219.208.50

IKEv1 pre-shared-key *.

type tunnel-group NCHCO remote access

attributes global-tunnel-group NCHCO

address pool VPN_Pool

Group Policy - by default-NCHCO

IPSec-attributes tunnel-group NCHCO

IKEv1 pre-shared-key *.

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

maximum message length automatic of customer

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

Review the ip options

!

global service-policy global_policy

context of prompt hostname

call-home

Profile of CiscoTAC-1

no active account

http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

email address of destination [email protected] / * /

destination-mode http transport

Subscribe to alert-group diagnosis

Subscribe to alert-group environment

Subscribe to alert-group monthly periodic inventory

monthly periodicals to subscribe to alert-group configuration

daily periodic subscribe to alert-group telemetry

Cryptochecksum:a2110206e1af06974c858fb40c6de2fc

: end

ASDM image disk0: / asdm - 649.bin

ASDM VPN_Start 255.255.255.255 inside location

ASDM VPN_End 255.255.255.255 inside location

don't allow no asdm history

---------------------------------------------------------------------------------------------------------------

And here are the logs of the Cisco VPN Client when sailing, then is unable to browse the network behind the ASA:

---------------------------------------------------------------------------------------------------------------

Cisco Systems VPN Client Version 5.0.07.0440

Copyright (C) 1998-2010 Cisco Systems, Inc.. All rights reserved.

Customer type: Windows, Windows NT

Running: 6.1.7601 Service Pack 1

Config files directory: C:\Program Files (x 86) \Cisco Systems\VPN Client\

1 09:44:55.677 01/10/13 Sev = Info/6 CERT / 0 x 63600026

Try to find a certificate using hash Serial.

2 09:44:55.677 01/10/13 Sev = Info/6 CERT / 0 x 63600027

Found a certificate using hash Serial.

3 09:44:55.693 01/10/13 Sev = Info/6 GUI/0x63B00011

RELOADED successfully certificates in all certificate stores.

4 09:45:02.802 10/01/13 Sev = Info/4 CM / 0 x 63100002

Start the login process

5 09:45:02.802 01/10/13 Sev = Info/4 CM / 0 x 63100004

Establish a secure connection

6 09:45:02.802 01/10/13 Sev = Info/4 CM / 0 x 63100024

Attempt to connect with the server "*." **. ***. *** »

7 09:45:02.802 10/01/13 Sev = Info/6 IKE/0x6300003B

Try to establish a connection with *. **. ***. ***.

8 09:45:02.818 10/01/13 Sev = Info/4 IKE / 0 x 63000001

From IKE Phase 1 negotiation

9 09:45:02.865 10/01/13 Sev = Info/4 IKE / 0 x 63000013

SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Frag), VID(Nat-T), VID (Unity)) to *. **. ***. ***

10 09:45:02.896 10/01/13 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = *. **. ***. ***

11 09:45:02.896 10/01/13 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" ag="" (sa,="" ke,="" non,="" id,="" hash,="" vid(unity),="" vid(xauth),="" vid(dpd),="" vid(nat-t),="" nat-d,="" nat-d,="" vid(frag),="" vid(?))="" from="">

12 09:45:02.896 10/01/13 Sev = Info/5 IKE / 0 x 63000001

Peer is a compatible peer Cisco-Unity

13 09:45:02.896 01/10/13 Sev = Info/5 IKE / 0 x 63000001

Peer supports XAUTH

14 09:45:02.896 01/10/13 Sev = Info/5 IKE / 0 x 63000001

Peer supports the DPD

15 09:45:02.896 01/10/13 Sev = Info/5 IKE / 0 x 63000001

Peer supports NAT - T

16 09:45:02.896 01/10/13 Sev = Info/5 IKE / 0 x 63000001

Peer supports fragmentation IKE payloads

17 09:45:02.927 01/10/13 Sev = Info/6 IKE / 0 x 63000001

IOS Vendor ID successful construction

18 09:45:02.927 01/10/13 Sev = Info/4 IKE / 0 x 63000013

SENDING > ISAKMP OAK AG * (HASH, NOTIFY: NAT - D, NAT - D, VID (?), STATUS_INITIAL_CONTACT, VID (Unity)) to *. **. ***. ***

19 09:45:02.927 01/10/13 Sev = Info/4 IKE / 0 x 63000083

IKE port in use - Local Port = 0xDD3B, Remote Port = 0x01F4

20 09:45:02.927 01/10/13 Sev = Info/5 IKE / 0 x 63000072

Automatic NAT detection status:

Remote endpoint is NOT behind a NAT device

This effect is NOT behind a NAT device

21 09:45:02.927 01/10/13 Sev = Info/4 CM/0x6310000E

ITS established Phase 1. 1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

22 09:45:02.943 10/01/13 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = *. **. ***. ***

23 09:45:02.943 01/10/13 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">

24 09:45:02.943 01/10/13 Sev = Info/4 CM / 0 x 63100015

Launch application xAuth

25 09:45:03.037 01/10/13 Sev = Info/6 GUI/0x63B00012

Attributes of the authentication request is 6: 00.

26 09:45:03.037 01/10/13 Sev = Info/4 CM / 0 x 63100017

xAuth application returned

27 09:45:03.037 10/01/13 Sev = Info/4 IKE / 0 x 63000013

SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***

28 09:45:03.037 10/01/13 Sev = Info/4 IPSEC / 0 x 63700008

IPSec driver started successfully

29 09:45:03.037 01/10/13 Sev = Info/4 IPSEC / 0 x 63700014

Remove all keys

30 09:45:03.083 01/10/13 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = *. **. ***. ***

31 09:45:03.083 01/10/13 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">

32 09:45:03.083 01/10/13 Sev = Info/4 IKE / 0 x 63000013

SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***

33 09:45:03.083 01/10/13 Sev = Info/4 CM/0x6310000E

ITS established Phase 1. 1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

34 09:45:03.083 01/10/13 Sev = Info/5 IKE/0x6300005E

Customer address a request from firewall to hub

35 09:45:03.083 01/10/13 Sev = Info/4 IKE / 0 x 63000013

SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***

36 09:45:03.146 01/10/13 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = *. **. ***. ***

37 09:45:03.146 01/10/13 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="" **.**.***.***="" isakmp="" oak="" trans="" *(hash,="" attr)="" from="">

38 09:45:03.146 01/10/13 Sev = Info/5 IKE / 0 x 63000010

MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS:, value = 192.168.2.70

39 09:45:03.146 01/10/13 Sev = Info/5 IKE / 0 x 63000010

MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_NETMASK:, value = 255.255.255.0

40 09:45:03.146 01/10/13 Sev = Info/5 IKE / 0 x 63000010

MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (1):, value = 192.168.2.1

41 09:45:03.146 01/10/13 Sev = Info/5 IKE / 0 x 63000010

MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (2):, value = 8.8.8.8

42 09:45:03.146 01/10/13 Sev = Info/5 IKE/0x6300000D

MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SAVEPWD:, value = 0x00000001

43 09:45:03.146 01/10/13 Sev = Info/5 IKE/0x6300000D

MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SPLIT_INCLUDE (# of split_nets), value = 0x00000001

44 09:45:03.146 10/01/13 Sev = Info/5 IKE/0x6300000F

SPLIT_NET #1

= 192.168.2.0 subnet

mask = 255.255.255.0

Protocol = 0

SRC port = 0

port dest = 0

45 09:45:03.146 10/01/13 Sev = Info/5 IKE/0x6300000E

MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN:, value = NCHCO.local

46 09:45:03.146 01/10/13 Sev = Info/5 IKE/0x6300000D

MODE_CFG_REPLY: Attribute = MODECFG_UNITY_UDP_NAT_PORT, value = 0 x 00002710

47 09:45:03.146 01/10/13 Sev = Info/5 IKE/0x6300000D

MODE_CFG_REPLY: Attribute = MODECFG_UNITY_PFS:, value = 0x00000000

48 09:45:03.146 01/10/13 Sev = Info/5 IKE/0x6300000E

MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = 8.4 (1) Cisco systems, Inc. ASA5505 Version built by manufacturers on Tuesday, January 31, 11 02:11

49 09:45:03.146 01/10/13 Sev = Info/5 IKE/0x6300000D

MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SMARTCARD_REMOVAL_DISCONNECT:, value = 0x00000001

50 09:45:03.146 01/10/13 Sev = Info/4 CM / 0 x 63100019

Data in mode Config received

51 09:45:03.146 01/10/13 Sev = Info/4 IKE / 0 x 63000056

Received a request from key driver: local IP = 192.168.2.70, GW IP = *. **. ***. remote IP address = 0.0.0.0

52 09:45:03.146 01/10/13 Sev = Info/4 IKE / 0 x 63000013

SEND to > ISAKMP OAK QM * (HASH, SA, NO, ID, ID) to *. **. ***. ***

53 09:45:03.177 01/10/13 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = *. **. ***. ***

54 09:45:03.177 01/10/13 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:status_resp_lifetime)="" from="">

55 09:45:03.177 01/10/13 Sev = Info/5 IKE / 0 x 63000045

Answering MACHINE-LIFE notify has value of 86400 seconds

56 09:45:03.177 01/10/13 Sev = Info/5 IKE / 0 x 63000047

This SA was already alive for 1 second, expiration of adjustment to 86399 seconds now

57 09:45:03.193 01/10/13 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = *. **. ***. ***

58 09:45:03.193 01/10/13 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" qm="" *(hash,="" sa,="" non,="" id,="" id,="" notify:status_resp_lifetime)="" from="">

59 09:45:03.193 01/10/13 Sev = Info/5 IKE / 0 x 63000045

Answering MACHINE-LIFE notify is set to 28800 seconds

60 09:45:03.193 01/10/13 Sev = Info/4 IKE / 0 x 63000013

SEND to > ISAKMP OAK QM * (HASH) to *. **. ***. ***

61 09:45:03.193 01/10/13 Sev = Info/5 IKE / 0 x 63000059

IPsec Security Association of loading (MsgID = SPI OUTBOUND SPI INCOMING = 0x3EBEBFC5 0xAAAF4C1C = 967A3C93)

62 09:45:03.193 01/10/13 Sev = Info/5 IKE / 0 x 63000025

OUTGOING ESP SPI support: 0xAAAF4C1C

63 09:45:03.193 01/10/13 Sev = Info/5 IKE / 0 x 63000026

Charges INBOUND ESP SPI: 0x3EBEBFC5

64 09:45:03.193 01/10/13 Sev = Info/5 CVPND / 0 x 63400013

Destination mask subnet Gateway Interface metric

0.0.0.0 0.0.0.0 96.11.251.1 96.11.251.149 261

96.11.251.0 255.255.255.0 96.11.251.149 96.11.251.149 261

96.11.251.149 255.255.255.255 96.11.251.149 96.11.251.149 261

96.11.251.255 255.255.255.255 96.11.251.149 96.11.251.149 261

127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 306

127.0.0.1 255.255.255.255 127.0.0.1 127.0.0.1 306

127.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306

192.168.1.0 255.255.255.0 192.168.1.3 192.168.1.3 261

192.168.1.3 255.255.255.255 192.168.1.3 192.168.1.3 261

192.168.1.255 255.255.255.255 192.168.1.3 192.168.1.3 261

224.0.0.0 240.0.0.0 127.0.0.1 127.0.0.1 306

224.0.0.0 240.0.0.0 96.11.251.149 96.11.251.149 261

224.0.0.0 240.0.0.0 192.168.1.3 192.168.1.3 261

255.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306

255.255.255.255 255.255.255.255 96.11.251.149 96.11.251.149 261

255.255.255.255 255.255.255.255 192.168.1.3 192.168.1.3 261

65 09:45:03.521 01/10/13 Sev = Info/6 CVPND / 0 x 63400001

Launch VAInst64 for controlling IPSec virtual card

66 09:45:03.896 01/10/13 Sev = Info/4 CM / 0 x 63100034

The virtual card has been activated:

IP=192.168.2.70/255.255.255.0

DNS = 192.168.2.1, 8.8.8.8

WINS = 0.0.0.0 0.0.0.0

Domain = NCHCO.local

Split = DNS names

67 09:45:03.912 01/10/13 Sev = Info/5 CVPND / 0 x 63400013

Destination mask subnet Gateway Interface metric

0.0.0.0 0.0.0.0 96.11.251.1 96.11.251.149 261

96.11.251.0 255.255.255.0 96.11.251.149 96.11.251.149 261

96.11.251.149 255.255.255.255 96.11.251.149 96.11.251.149 261

96.11.251.255 255.255.255.255 96.11.251.149 96.11.251.149 261

127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 306

127.0.0.1 255.255.255.255 127.0.0.1 127.0.0.1 306

127.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306

192.168.1.0 255.255.255.0 192.168.1.3 192.168.1.3 261

192.168.1.3 255.255.255.255 192.168.1.3 192.168.1.3 261

192.168.1.255 255.255.255.255 192.168.1.3 192.168.1.3 261

224.0.0.0 240.0.0.0 127.0.0.1 127.0.0.1 306

224.0.0.0 240.0.0.0 96.11.251.149 96.11.251.149 261

224.0.0.0 240.0.0.0 192.168.1.3 192.168.1.3 261

224.0.0.0 240.0.0.0 0.0.0.0 0.0.0.0 261

255.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306

255.255.255.255 255.255.255.255 96.11.251.149 96.11.251.149 261

255.255.255.255 255.255.255.255 192.168.1.3 192.168.1.3 261

255.255.255.255 255.255.255.255 0.0.0.0 0.0.0.0 261

68 09:45:07.912 01/10/13 Sev = Info/4 CM / 0 x 63100038

Were saved successfully road to file changes.

69 09:45:07.912 01/10/13 Sev = Info/5 CVPND / 0 x 63400013

Destination mask subnet Gateway Interface metric

0.0.0.0 0.0.0.0 96.11.251.1 96.11.251.149 261

**. **. ***. 255.255.255.255 96.11.251.1 96.11.251.149 100

96.11.251.0 255.255.255.0 96.11.251.149 96.11.251.149 261

96.11.251.149 255.255.255.255 96.11.251.149 96.11.251.149 261

96.11.251.255 255.255.255.255 96.11.251.149 96.11.251.149 261

127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 306

127.0.0.1 255.255.255.255 127.0.0.1 127.0.0.1 306

127.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306

192.168.1.0 255.255.255.0 192.168.1.3 192.168.1.3 261

192.168.1.3 255.255.255.255 192.168.1.3 192.168.1.3 261

192.168.1.255 255.255.255.255 192.168.1.3 192.168.1.3 261

192.168.2.0 255.255.255.0 192.168.2.70 192.168.2.70 261

192.168.2.0 255.255.255.0 192.168.2.1 192.168.2.70 100

192.168.2.70 255.255.255.255 192.168.2.70 192.168.2.70 261

192.168.2.255 255.255.255.255 192.168.2.70 192.168.2.70 261

224.0.0.0 240.0.0.0 127.0.0.1 127.0.0.1 306

224.0.0.0 240.0.0.0 96.11.251.149 96.11.251.149 261

224.0.0.0 240.0.0.0 192.168.1.3 192.168.1.3 261

224.0.0.0 240.0.0.0 192.168.2.70 192.168.2.70 261

255.255.255.255 255.255.255.255 127.0.0.1 127.0.0.1 306

255.255.255.255 255.255.255.255 96.11.251.149 96.11.251.149 261

255.255.255.255 255.255.255.255 192.168.1.3 192.168.1.3 261

255.255.255.255 255.255.255.255 192.168.2.70 192.168.2.70 261

70 09:45:07.912 01/10/13 Sev = Info/6 CM / 0 x 63100036

The routing table has been updated for the virtual card

71 09:45:07.912 01/10/13 Sev = Info/4 CM/0x6310001A

A secure connection established

72 09:45:07.943 01/10/13 Sev = Info/4 CM/0x6310003B

Look at address added to 96.11.251.149. Current host name: psaserver, current address (s): 192.168.2.70, 96.11.251.149, 192.168.1.3.

73 09:45:07.943 01/10/13 Sev = Info/4 CM/0x6310003B

Look at address added to 192.168.2.70. Current host name: psaserver, current address (s): 192.168.2.70, 96.11.251.149, 192.168.1.3.

74 09:45:07.943 01/10/13 Sev = Info/5 CM / 0 x 63100001

Did not find the smart card to watch for removal

75 09:45:07.943 01/10/13 Sev = Info/4 IPSEC / 0 x 63700014

Remove all keys

76 09:45:07.943 01/10/13 Sev = Info/4 IPSEC / 0 x 63700010

Creates a new key structure

77 09:45:07.943 01/10/13 Sev = Info/4 IPSEC/0x6370000F

Adding key with SPI = 0x1c4cafaa in the list of keys

78 09:45:07.943 01/10/13 Sev = Info/4 IPSEC / 0 x 63700010

Creates a new key structure

79 09:45:07.943 01/10/13 Sev = Info/4 IPSEC/0x6370000F

Adding key with SPI = 0xc5bfbe3e in the list of keys

80 09:45:07.943 01/10/13 Sev = Info/4 IPSEC/0x6370002F

Assigned WILL interface private addr 192.168.2.70

81 09:45:07.943 01/10/13 Sev = Info/4 IPSEC / 0 x 63700037

Configure the public interface: 96.11.251.149. SG: **.**.***.***

82 09:45:07.943 10/01/13 Sev = Info/6 CM / 0 x 63100046

Define indicator tunnel set up in the registry to 1.

83 09:45:13.459 01/10/13 Sev = Info/4 IKE / 0 x 63000013

SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) to *. **. ***. ***

84 09:45:13.459 01/10/13 Sev = Info/6 IKE/0x6300003D

Upon request of the DPD to *. **. ***. , our seq # = 107205276

85 09:45:13.474 01/10/13 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = *. **. ***. ***

86 09:45:13.474 01/10/13 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">

87 09:45:13.474 01/10/13 Sev = Info/5 IKE / 0 x 63000040

Receipt of DPO ACK to *. **. ***. seq # receipt = 107205276, seq # expected is 107205276

88 09:45:15.959 01/10/13 Sev = Info/4 IPSEC / 0 x 63700019

Activate key dating SPI = 0x1c4cafaa key with SPI = 0xc5bfbe3e

89 09:46:00.947 10/01/13 Sev = Info/4 IKE / 0 x 63000013

SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) to *. **. ***. ***

90 09:46:00.947 01/10/13 Sev = Info/6 IKE/0x6300003D

Upon request of the DPD to *. **. ***. , our seq # = 107205277

91 09:46:01.529 01/10/13 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = *. **. ***. ***

92 09:46:01.529 01/10/13 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">

93 09:46:01.529 01/10/13 Sev = Info/5 IKE / 0 x 63000040

Receipt of DPO ACK to *. **. ***. seq # receipt = 107205277, seq # expected is 107205277

94 09:46:11.952 01/10/13 Sev = Info/4 IKE / 0 x 63000013

SEND to > ISAKMP OAK INFO * (HASH, NOTIFY: DPD_REQUEST) to *. **. ***. ***

95 09:46:11.952 01/10/13 Sev = Info/6 IKE/0x6300003D

Upon request of the DPD to *. **. ***. , our seq # = 107205278

96 09:46:11.979 01/10/13 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = *. **. ***. ***

97 09:46:11.979 01/10/13 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:dpd_ack)="" from="">

98 09:46:11.979 01/10/13 Sev = Info/5 IKE / 0 x 63000040

Receipt of DPO ACK to *. **. ***. seq # receipt = 107205278, seq # expected is 107205278

---------------------------------------------------------------------------------------------------------------

Any help would be appreciated, thanks!

try to refuse the ACL (access-list AnyConnect_Client_Local_Print extended deny ip any one) at the end of the ACL.

ASA 5505 VPN sessions maximum 25?

Hello friend´s

The company I work when acquired several ASA 5505, so now we will be able to connect several branches at Headquarters. But, now, I know that the ASA 5505 just scalates to 25 VPN sessions, I think that it won´t be enough to support the operations of an office. I have a lot of questions about this:

Is - what the number 25 menas supporting up to 25 L2L tunnels? Or it means 25 sessions, regardless of the amount of L2L tunnels?

Is this the way number 25 supporting up to 25 users in the Branch Office? Or it means that a user can use several sessions?

I'm the stage of testing in a laboratory where one PC connects to many applications, at - it now someone if there is a command in the SAA to check how many VPN sessions is used?

Please, do not hesitate to ask as much as necessary information. Any comments or document will be appreciated.

Kind regards!

Hi Alex,

The assistance session 25 ASA 5505 VPN as max for IKEv1 or IPSEC tunnels customers it could be up to 25 L2L tunnels or 25 users using ikev1 (Legacy IPSEC client) and another 25 sessions for Anyconnect or Webvpn in this case are used in function.

To check how many sessions VPN is currently running, run the command 'Show vpn-sessiondb' and 'display the summary vpn-sessiondb '.

Find the official documentation for the ASA5505 on the following link:

http://www.Cisco.com/c/en/us/products/collateral/security/ASA-5500-series-next-generation-firewalls/datasheet-C78-733510.html

Rate if helps.

-Randy-

Problem setting out by ASA 5505 VPN

While inside a network secured by an ASA 5505, I can't establish a PPTP VPN on. The ASA will connect the following:

09-2009 20:50:09 creating 305006 24.13.209.125 regular translation failed for the internal protocol 47 src: 192.168.132.108 dst outside:xxx.xxx.xxx.125

I looked at the msg of error in line, but for some reason, I'm just not understand what he says. How can I fix it? Let me know if you have any questions... Thank you guys!

Colombia-British

Hello

Enable pptp inspection

pixfirewall (config) #policy - map global_policy

pixfirewall(config-pmap) #class inspection_default

pixfirewall (config-pmap-c) #inspect pptp

Go to this link for the use of pptp/gre info background detail under various codes.

http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a0080094a5a.shtml

Concerning

ASA 5505 VPN Site to site with several networks

Hello

I have a Cisco ASA 5505 configuration problem and hope you can help me.

Our company created a second facility, which must be connected using VPN to our headquarters.

I used the ASDM "Wizard of Site to site VPN" to create a connection, which works very well with our main network.

Following structure:

Headquarters:

Cisco ASA 5505, firmware 9.1, ASDM version 7.1

Outside: Fixed IP

Inside: IP address of the interface is 192.168.0.1/24 (data network)

Now I have a second network 192.168.1.0/24 (VoIP network), PBX address is 192.168.1.10.

The two networks should be accessible through the VPN.

New installation:

Cisco ASA 5505, firmware 9.1, ASDM version 7.1

Outside: Fixed IP

Inside: IP address of the interface is 192.168.2.1/24

I have already created a connection until a PC of the new plant reaches the data network. For example, a ping from 192.168.2.100 to 192.168.0.100 is possible.

Now, I want to add some VoIP phones to the new facility, which can reach the PBX on 192.168.1.10.

In the link, I have already added the two networks as remote network:
```
object-group network Testgroup network-object 192.168.0.0 255.255.255.0 network-object 192.168.1.0 255.255.255.0 access-list outside_cryptomap extended permit ip object-group Testgroup object Remote-Network 
```
My problem now is, I don't know what to define as 'Bridge' on my PBX.

I can't use 192.168.0.1 because it's a different subnet. Also, I can not put a second IP 192.168.1.1 to the interface of the ASA.

You have any ideas, how can I accomplish this, so that the two subnets are accessed through the VPN and all devices have a defined gateway?

Could a "Easy VPN Remote" in "Network Mode" you help me?

What is the difference between 'Site-to-site' and 'extended network '?

Kind regards

Daniel condition, look for the solution GmbH

You can optionally configure a new LAN VIRTUAL (VLAN PBX) on the SAA and connect this interface to the voice network.

If you do not have a spare on the ASA port, then Yes, you have a router to route traffic from the PBX to the ASA via the data network.

Site to site ASA 5505 VPN does not

Hello

We have configuration problems our VPN site-to-site with our ASA 5505. We ran the assistants who seem to be straight forward, but we have no chance for them to communicate with each other via ping or anything else. If someone could help us, our configs for our two sites:

Site A:

Output of the command: "sho run".

: Saved
:
ASA Version 7.2 (4)
!
ciscoasa hostname
domain default.domain.invalid

names of
DNS-guard
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.45.20 255.255.255.0
OSPF cost 10
!
interface Vlan2
nameif outside
security-level 0
IP address 173.xxx.xxx.249 255.255.255.252
OSPF cost 10
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
clock timezone EST - 5
clock to summer time EDT recurring
DNS server-group DefaultDNS
domain default.domain.invalid
permit same-security-traffic inter-interface
extended incoming access permit tcp host 173.xxx.xxx.249 eq www list everything
list of extended inbound icmp permitted access a whole
list of allowed inbound tcp extended access any host 173.xxx.xxx.249 eq www
extended incoming access permit tcp host 173.xxx.xxx.249 eq https list everything
list of allowed inbound tcp extended access any host 173.xxx.xxx.249 eq https
access extensive list ip 192.168.45.0 outside_20_cryptomap allow 255.255.255.0 192.168.42.0 255.255.255.0
access extensive list ip 192.168.45.0 inside_nat0_outbound allow 255.255.255.0 192.168.42.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
ASDM image disk0: / asdm - 524.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Access-group interface incoming outside
Route inside 192.168.0.0 255.255.255.0 192.168.45.20 1
Route inside 192.168.0.0 255.255.0.0 192.168.45.20 1
Route outside 0.0.0.0 0.0.0.0 173.xxx.xxx.250 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
Enable http server
http 192.168.45.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
card crypto outside_map 20 match address outside_20_cryptomap
card crypto outside_map 20 set pfs
card crypto outside_map 20 peers set 50.xxx.xxx.89
outside_map crypto 20 card value transform-set ESP-3DES-SHA
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 192.168.45.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
68.xxx.xxx.194 dns 192.168.45.20 dhcpd
dhcpd outside auto_config
!

tunnel-group 50.xxx.xxx.89 type ipsec-l2l
50.xxx.xxx.89 group of tunnel ipsec-attributes
pre-shared-key * (key is the same on the two ASA)
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 1500
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
: end

Site b:

Output of the command: "sho run".

: Saved
:
ASA Version 7.2 (4)
!
host name
domain default.domain.invalid

names of
DNS-guard
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.42.12 255.255.255.0
OSPF cost 10
!
interface Vlan2
nameif outside
security-level 0
IP address 50.xxx.xxx.89 255.255.255.248
OSPF cost 10
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
DNS server-group DefaultDNS
domain default.domain.invalid
permit same-security-traffic inter-interface
list of allowed inbound tcp interface out eq 3389 home 192.168.42.26 extended access
list of extended inbound icmp permitted access a whole
list of allowed inbound tcp interface out eq 39000 home 192.168.42.254 extended access
list of allowed inbound tcp interface out eq 39001 home 192.168.42.254 extended access
list of allowed inbound tcp interface out eq 39002 home 192.168.42.254 extended access
list of allowed inbound udp out eq 39000 home 192.168.42.254 interface extended access
list of allowed inbound udp out eq 39001 home 192.168.42.254 interface extended access
list of allowed inbound udp out eq 39002 home 192.168.42.254 interface extended access
list of incoming access permit tcp host 50.xxx.xxx.89 eq 3389 everything
list of allowed inbound tcp extended access any host 50.xxx.xxx.89 eq 3389
extended incoming access permit tcp host 50.xxx.xxx.89 eq www list everything
list of allowed inbound tcp extended access any host 50.xxx.xxx.89 eq www
extended incoming access permit tcp host 50.xxx.xxx.89 eq https list everything
list of allowed inbound tcp extended access any host 50.xxx.xxx.89 eq https
extended incoming access permit tcp host 50.xxx.xxx.89 eq 39000 list everything
list of allowed inbound tcp extended access any host 50.xxx.xxx.89 eq 39000
extended incoming access permit tcp host 50.xxx.xxx.89 eq 16450 list everything
list of allowed inbound tcp extended access any host 50.xxx.xxx.89 eq 16450
access extensive list ip 192.168.42.0 outside_20_cryptomap allow 255.255.255.0 192.168.45.0 255.255.255.0
access extensive list ip 192.168.42.0 inside_nat0_outbound allow 255.255.255.0 192.168.45.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information

Within 1500 MTU
Outside 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
ASDM image disk0: / asdm - 524.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
static (inside, outside) tcp 3389 192.168.42.26 interface 3389 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 39000 192.168.42.254 39000 netmask 255.255.255.255
public static (inside, outside) udp interface 39000 192.168.42.254 39000 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 39001 192.168.42.254 39001 netmask 255.255.255.255
public static (inside, outside) udp interface 39001 192.168.42.254 39001 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 39002 192.168.42.254 39002 netmask 255.255.255.255
public static (inside, outside) udp interface 39002 192.168.42.254 39002 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 16450 192.168.42.254 16450 netmask 255.255.255.255
Access-group interface incoming outside
Route inside 192.168.0.0 255.255.255.0 192.168.42.12 1
Route inside 192.168.0.0 255.255.0.0 192.168.42.12 1
Route outside 0.0.0.0 0.0.0.0 50.xxx.xxx.94 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
Enable http server
http 192.168.42.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
card crypto outside_map 20 match address outside_20_cryptomap
card crypto outside_map 20 set pfs
card crypto outside_map 20 peers set 173.xxx.xxx.249
outside_map crypto 20 card value transform-set ESP-3DES-SHA
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 192.168.42.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
dhcpd address 192.168.42.13 - 192.168.42.44 inside
!

tunnel-group 173.xxx.xxx.249 type ipsec-l2l
173.xxx.xxx.249 group of tunnel ipsec-attributes
pre-shared-key * (same as the other ASA)
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 1500
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
: end

Thank you very much as I apperciate your all of the help.

Scott

Hi Scott,.

Configs looks very good. Don't know why you need ' route stmts in 192.168.0.0 255.255.0.0' network on both sides. They point to the inside of the ASA. Remove and try to reach the other end PC. If you need to keep it, then try to add specific routes...

A:

Route outside 192.168.42.0 255.255.255.0 173.xxx.xxx.250 1

B:

Route outside 192.168.45.0 255.255.255.0 50.xxx.xxx.94 1

HTH

MS

Cisco ASA 5505 VPN Site to Site

Hi all

First post on the forums. I have worked with Cisco ASA 5505 for a few months and I recently bought a 2nd ASA to implement tunnel VPN Site to Site. It seems so simple in the number of videos watched on the internet. But when I did he surprise it did work for me... I've removed the tunnels, a number of times and tried to recreate. I use the VPN Wizard in the SMA to create the tunnel. Both the asa 5505 of are and have the same firmware even etc..

I'd appreciate any help that can be directed to this problem please. Slowly losing my mind

Please see details below:

Two ADMS are 7.1

IOS

ASA 1

Nadia

:

ASA Version 9.0 (1)

!

hostname PAYBACK

activate the encrypted password of HSMurh79NVmatjY0

volatile xlate deny tcp any4 any4

volatile xlate deny tcp any4 any6

volatile xlate deny tcp any6 any4

volatile xlate deny tcp any6 any6

volatile xlate deny udp any4 any4 eq field

volatile xlate deny udp any4 any6 eq field

volatile xlate deny udp any6 any4 eq field

volatile xlate deny udp any6 any6 eq field

2KFQnbNIdI.2KYOU encrypted passwd

names of

local pool VPN1 192.168.50.1 - 192.168.50.254 255.255.255.0 IP mask

!

interface Ethernet0/0

switchport access vlan 2

Speed 100

full duplex

!

interface Ethernet0/1

link Trunk Description of SW1

switchport trunk allowed vlan 1,10,20,30,40

switchport trunk vlan 1 native

switchport mode trunk

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

interface Vlan1

No nameif

no level of security

no ip address

!

interface Vlan2

nameif outside

security-level 0

IP 92.51.193.158 255.255.255.252

!

interface Vlan10

nameif inside

security-level 100

IP 192.168.10.1 255.255.255.0

!

interface Vlan20

nameif servers

security-level 100

address 192.168.20.1 255.255.255.0

!

Vlan30 interface

nameif printers

security-level 100

192.168.30.1 IP address 255.255.255.0

!

interface Vlan40

nameif wireless

security-level 100

192.168.40.1 IP address 255.255.255.0

!

connection line banner welcome to the Payback loyalty systems

boot system Disk0: / asa901 - k8.bin

passive FTP mode

summer time clock GMT/IDT recurring last Sun Mar 01:00 last Sun Oct 02:00

DNS domain-lookup outside

DNS lookup field inside

domain-lookup DNS servers

DNS lookup domain printers

DNS domain-lookup wireless

DNS server-group DefaultDNS

Server name 83.147.160.2

Server name 83.147.160.130

permit same-security-traffic inter-interface

network obj_any object

subnet 0.0.0.0 0.0.0.0

ftp_server network object

network of the Internal_Report_Server object

Home 192.168.20.21

Description address internal automated report server

network of the Report_Server object

Home 89.234.126.9

Description of server automated reports

service object RDP

service destination tcp 3389 eq

Description RDP to the server

network of the Host_QA_Server object

Home 89.234.126.10

Description QA host external address

network of the Internal_Host_QA object

Home 192.168.20.22

host of computer virtual Description for QA

network of the Internal_QA_Web_Server object

Home 192.168.20.23

Description Web Server in the QA environment

network of the Web_Server_QA_VM object

Home 89.234.126.11

Server Web Description in the QA environment

service object SQL_Server

destination eq 1433 tcp service

network of the Demo_Server object

Home 89.234.126.12

Description server set up for the product demo

network of the Internal_Demo_Server object

Home 192.168.20.24

Internal description of the demo server IP address

network of the NETWORK_OBJ_192.168.20.0_24 object

subnet 192.168.20.0 255.255.255.0

network of the NETWORK_OBJ_192.168.50.0_26 object

255.255.255.192 subnet 192.168.50.0

network of the NETWORK_OBJ_192.168.0.0_16 object

Subnet 192.168.0.0 255.255.0.0

service object MSSQL

destination eq 1434 tcp service

MSSQL port description

VPN network object

192.168.50.0 subnet 255.255.255.0

network of the NETWORK_OBJ_192.168.50.0_24 object

192.168.50.0 subnet 255.255.255.0

service object TS

tcp destination eq 4400 service

service of the TS_Return object

tcp source eq 4400 service

network of the External_QA_3 object

Home 89.234.126.13

network of the Internal_QA_3 object

Home 192.168.20.25

network of the Dev_WebServer object

Home 192.168.20.27

network of the External_Dev_Web object

Home 89.234.126.14

network of the CIX_Subnet object

255.255.255.0 subnet 192.168.100.0

network of the NETWORK_OBJ_192.168.10.0_24 object

192.168.10.0 subnet 255.255.255.0

network of the NETWORK_OBJ_84.39.233.50 object

Home 84.39.233.50

network of the NETWORK_OBJ_92.51.193.158 object

Home 92.51.193.158

network of the NETWORK_OBJ_192.168.100.0_24 object

255.255.255.0 subnet 192.168.100.0

network of the NETWORK_OBJ_192.168.1.0_24 object

subnet 192.168.1.0 255.255.255.0

object-group service DM_INLINE_SERVICE_1

the tcp destination eq ftp service object

the purpose of the tcp destination eq netbios-ssn service

the purpose of the tcp destination eq smtp service

service-object TS

the Payback_Internal object-group network

object-network 192.168.10.0 255.255.255.0

object-network 192.168.20.0 255.255.255.0

object-network 192.168.40.0 255.255.255.0

object-group service DM_INLINE_SERVICE_3

the purpose of the service tcp destination eq www

the purpose of the tcp destination eq https service

service-object TS

service-object, object TS_Return

object-group service DM_INLINE_SERVICE_4

service-object RDP

the purpose of the service tcp destination eq www

the purpose of the tcp destination eq https service

object-group service DM_INLINE_SERVICE_5

purpose purpose of the MSSQL service

service-object RDP

service-object TS

object-group Protocol TCPUDP

object-protocol udp

object-tcp protocol

object-group service DM_INLINE_SERVICE_6

service-object TS

service-object, object TS_Return

the purpose of the service tcp destination eq www

the purpose of the tcp destination eq https service

Note to outside_access_in to access list that this rule allows Internet the interal server.

Notice on the outside_access_in of the access-list allowed:

Comment from outside_access_in-list of FTP access

Comment from outside_access_in-RDP access list

Comment from outside_access_in-list of SMTP access

Note to outside_access_in to access list Net Bios

Comment from outside_access_in-SQL access list

Comment from outside_access_in-list to access TS - 4400

outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_1 any4 Internal_Report_Server

access host access-list outside_access_in note rule internal QA

Notice on the outside_access_in of the access-list allowed:

Comment from outside_access_in-HTTP access list

Comment from outside_access_in-RDP access list

outside_access_in list extended access permitted tcp any4 object Internal_Host_QA eq www

Notice on the outside_access_in of the access-list access to the internal Web server:

Notice on the outside_access_in of the access-list allowed:

Comment from outside_access_in-HTTP access list

Comment from outside_access_in-RDP access list

outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_3 any4 Internal_QA_Web_Server

Note to outside_access_in to access list rule allowing access to the demo server

Notice on the outside_access_in of the access-list allowed:

Comment from outside_access_in-RDP access list

Comment from outside_access_in-list to access MSSQL

outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_4 any4 Internal_Demo_Server

outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_5 any object Internal_QA_3

Note to outside_access_in access to the development Web server access list

outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_6 any object Dev_WebServer

AnyConnect_Client_Local_Print deny any4 any4 ip extended access list

AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq lpd

Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol

AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq 631

print the access-list AnyConnect_Client_Local_Print Note Windows port

AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq 9100

access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol

AnyConnect_Client_Local_Print list extended access permit udp host 224.0.0.251 any4 eq 5353

AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol

AnyConnect_Client_Local_Print list extended access permit udp host 224.0.0.252 any4 eq 5355

Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print

AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 EQ. 137

AnyConnect_Client_Local_Print list extended access permitted udp any4 any4 eq netbios-ns

Payback_VPN_splitTunnelAcl list standard access allowed 192.168.20.0 255.255.255.0

permit outside_cryptomap to access extended list ip 192.168.10.0 255.255.255.0 192.168.100.0 255.255.255.0

pager lines 24

Enable logging

information recording console

asdm of logging of information

address record

[email protected] / * /.

the journaling recipient

[email protected] / * /.

level alerts

Outside 1500 MTU

Within 1500 MTU

MTU 1500 servers

MTU 1500 printers

MTU 1500 wireless

no failover

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm-711 - 52.bin

don't allow no asdm history

ARP timeout 14400

no permit-nonconnected arp

NAT (inside, outside) source Dynamics one interface

NAT (wireless, outdoors) source Dynamics one interface

NAT (servers, outside) no matter what source dynamic interface

NAT (servers, external) static source Internal_Report_Server Report_Server

NAT (servers, external) static source Internal_Host_QA Host_QA_Server

NAT (servers, external) static source Internal_QA_Web_Server Web_Server_QA_VM

NAT (servers, external) static source Internal_Demo_Server Demo_Server

NAT (servers, external) static source NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 non-proxy-arp-search of route static destination

NAT (servers, external) static source Internal_QA_3 External_QA_3

NAT (servers, external) static source Dev_WebServer External_Dev_Web

NAT (inside, outside) static source NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

NAT (inside, outside) static source NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 non-proxy-arp-search of route static destination

Access-group outside_access_in in interface outside

Route outside 0.0.0.0 0.0.0.0 92.51.193.157 1

Timeout xlate 03:00

Pat-xlate timeout 0:00:30

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.10.0 255.255.255.0 inside
http 192.168.40.0 255.255.255.0 wireless
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set pfs
peer set card crypto outside_map 1 84.39.233.50
card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 5
FRP sha
second life 86400
Crypto ikev2 activate out of service the customer port 443
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 77.75.100.208 255.255.255.240 outside
SSH 192.168.10.0 255.255.255.0 inside
SSH 192.168.40.0 255.255.255.0 wireless
SSH timeout 5
Console timeout 0

dhcpd 192.168.0.1 dns
dhcpd outside auto_config
!
dhcpd address 192.168.10.21 - 192.168.10.240 inside
dhcpd dns 192.168.20.21 83.147.160.2 interface inside
paybackloyalty.com dhcpd option 15 inside ascii interface
dhcpd allow inside
!
dhcpd address 192.168.40.21 - 192.168.40.240 Wireless
dhcpd dns 192.168.20.21 83.147.160.2 wireless interface
dhcpd update dns of the wireless interface
dhcpd option 15 ascii paybackloyalty.com wireless interface
dhcpd activate wireless
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
internal Payback_VPN group strategy
attributes of Group Policy Payback_VPN
VPN - 10 concurrent connections
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list Payback_VPN_splitTunnelAcl
attributes of Group Policy DfltGrpPolicy
value of 83.147.160.2 DNS server 83.147.160.130
VPN-tunnel-Protocol ikev1, ikev2 clientless ssl
internal GroupPolicy_84.39.233.50 group strategy
attributes of Group Policy GroupPolicy_84.39.233.50
VPN-tunnel-Protocol ikev1, ikev2
Noelle XB/IpvYaATP.2QYm username encrypted password
Noelle username attributes
VPN-group-policy Payback_VPN
type of remote access service
username Éanna encrypted password privilege 0 vXILR9ZZQIsd1Naw
Éanna attributes username
VPN-group-policy Payback_VPN
type of remote access service
Michael qpbleUqUEchRrgQX of encrypted password username
user name Michael attributes
VPN-group-policy Payback_VPN
type of remote access service
username, password from Danny .7fEXdzESUk6S/cC encrypted privilege 0
user name Danny attributes
VPN-group-policy Payback_VPN
type of remote access service
Aileen tytrelqvV5VRX2pz encrypted password privilege 0 username
user name Aileen attributes
VPN-group-policy Payback_VPN
type of remote access service
Aidan aDu6YH0V5XaxpEPg encrypted password privilege 0 username
Aidan username attributes
VPN-group-policy Payback_VPN
type of remote access service
username password 6e6Djaz3W/XH59zX gordon encrypted privilege 15
shane.c iqGMoWOnfO6YKXbw encrypted password username
username shane.c attributes
VPN-group-policy Payback_VPN
type of remote access service
Shane uYePLcrFadO9pBZx of encrypted password username
user name Shane attributes
VPN-group-policy Payback_VPN
type of remote access service
username, encrypted James TdYPv1pvld/hPM0d password
user name James attributes
VPN-group-policy Payback_VPN
type of remote access service
Mark yruxpddqfyNb.qFn of encrypted password username
user name brand attributes
type of service admin
username password of Mary XND5FTEiyu1L1zFD encrypted
user name Mary attributes
VPN-group-policy Payback_VPN
type of remote access service
Massimo vs65MMo4rM0l4rVu encrypted password privilege 0 username
Massimo username attributes
VPN-group-policy Payback_VPN
type of remote access service
type tunnel-group Payback_VPN remote access
attributes global-tunnel-group Payback_VPN
VPN1 address pool
Group Policy - by default-Payback_VPN
IPSec-attributes tunnel-group Payback_VPN
IKEv1 pre-shared-key *.
tunnel-group 84.39.233.50 type ipsec-l2l
tunnel-group 84.39.233.50 General-attributes
Group - default policy - GroupPolicy_84.39.233.50
IPSec-attributes tunnel-group 84.39.233.50
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
Global class-card class
match default-inspection-traffic
!
!
World-Policy policy-map
Global category
inspect the dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the pptp
inspect the rsh
inspect the rtsp
inspect the sip
inspect the snmp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect xdmcp
inspect the icmp error
inspect the icmp
!
service-policy-international policy global
192.168.20.21 SMTP server
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:d06974501eb0327a5ed229c8445f4fe1

ASA 2

ASA Version 9.0 (1)

!

Payback-CIX hostname

activate the encrypted password of HSMurh79NVmatjY0

2KFQnbNIdI.2KYOU encrypted passwd

names of

!

interface Ethernet0/0

switchport access vlan 2

Speed 100

full duplex

!

interface Ethernet0/1

Description this port connects to the local network VIRTUAL 100

switchport access vlan 100

!

interface Ethernet0/2

!

interface Ethernet0/3

switchport access vlan 100

!

interface Ethernet0/4

switchport access vlan 100

!

interface Ethernet0/5

switchport access vlan 100

!

interface Ethernet0/6

switchport access vlan 100

!

interface Ethernet0/7

switchport access vlan 100

!

interface Vlan2

nameif outside

security-level 0

IP 84.39.233.50 255.255.255.240

!

interface Vlan100

nameif inside

security-level 100

IP 192.168.100.1 address 255.255.255.0

!

banner welcome to Payback loyalty - CIX connection line

passive FTP mode

summer time clock gmt/idt recurring last Sun Mar 01:00 last Sun Oct 02:00

DNS domain-lookup outside

DNS lookup field inside

DNS server-group defaultDNS

Name-Server 8.8.8.8

Server name 8.8.4.4

permit same-security-traffic inter-interface

network obj_any object

subnet 0.0.0.0 0.0.0.0

network of the host-CIX-1 object

host 192.168.100.2

Description This is the VM server host machine

network object host-External_CIX-1

Home 84.39.233.51

Description This is the external IP address of the server the server VM host

service object RDP

source between 1-65535 destination eq 3389 tcp service

network of the Payback_Office object

Home 92.51.193.158

service object MSQL

destination eq 1433 tcp service

network of the Development_OLTP object

Home 192.168.100.10

Description for Eiresoft VM

network of the External_Development_OLTP object

Home 84.39.233.52

Description This is the external IP address for the virtual machine for Eiresoft

network of the Eiresoft object

Home 146.66.160.70

Contractor s/n description

network of the External_TMC_Web object

Home 84.39.233.53

Description Public address to the TMC Web server

network of the TMC_Webserver object

Home 192.168.100.19

Internal description address TMC Webserver

network of the External_TMC_OLTP object

Home 84.39.233.54

External targets OLTP IP description

network of the TMC_OLTP object

Home 192.168.100.18

description of the interal target IP address

network of the External_OLTP_Failover object

Home 84.39.233.55

IP failover of the OLTP Public description

network of the OLTP_Failover object

Home 192.168.100.60

Server failover OLTP description

network of the servers object

subnet 192.168.20.0 255.255.255.0

being Wired network

192.168.10.0 subnet 255.255.255.0

the subject wireless network

192.168.40.0 subnet 255.255.255.0

network of the NETWORK_OBJ_192.168.100.0_24 object

255.255.255.0 subnet 192.168.100.0

network of the NETWORK_OBJ_192.168.10.0_24 object

192.168.10.0 subnet 255.255.255.0

network of the Eiresoft_2nd object

Home 137.117.217.29

Description 2nd Eiresoft IP

network of the Dev_Test_Webserver object

Home 192.168.100.12

Description address internal to the Test Server Web Dev

network of the External_Dev_Test_Webserver object

Home 84.39.233.56

Description This is the PB Dev Test Webserver

network of the NETWORK_OBJ_192.168.1.0_24 object

subnet 192.168.1.0 255.255.255.0

object-group service DM_INLINE_SERVICE_1

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_2

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_3

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_4

service-object MSQL

service-object RDP

the tcp destination eq ftp service object

object-group service DM_INLINE_SERVICE_5

service-object MSQL

service-object RDP

the tcp destination eq ftp service object

object-group service DM_INLINE_SERVICE_6

service-object MSQL

service-object RDP

the Payback_Intrernal object-group network

object-network servers

Wired network-object

wireless network object

object-group service DM_INLINE_SERVICE_7

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_8

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_9

service-object MSQL

service-object RDP

object-group service DM_INLINE_SERVICE_10

service-object MSQL

service-object RDP

the tcp destination eq ftp service object

object-group service DM_INLINE_SERVICE_11

service-object RDP

the tcp destination eq ftp service object

outside_access_in list extended access allow object-group DM_INLINE_SERVICE_1 object Payback_Office object CIX-host-1

Note to access list OLTP Development Office of recovery outside_access_in

outside_access_in list extended access allow DM_INLINE_SERVICE_2 object Payback_Office object Development_OLTP object-group

Comment from outside_access_in-access Eiresoft access list

outside_access_in list extended access allow DM_INLINE_SERVICE_3 object Eiresoft object Development_OLTP object-group

outside_access_in list extended access allow DM_INLINE_SERVICE_4 object Payback_Office object TMC_Webserver object-group

Note to outside_access_in access to OLTP for target recovery Office Access list

outside_access_in list extended access allow DM_INLINE_SERVICE_5 object Payback_Office object TMC_OLTP object-group

outside_access_in list extended access allow DM_INLINE_SERVICE_6 object Payback_Office object OLTP_Failover object-group

Note to outside_access_in access-list that's allowing access of the Eiresoft on the failover OLTP server

outside_access_in list extended access allow DM_INLINE_SERVICE_7 object Eiresoft object OLTP_Failover object-group

Comment from outside_access_in-access list access for the 2nd period of INVESTIGATION of Eiresoft

outside_access_in list extended access allow DM_INLINE_SERVICE_8 object Eiresoft_2nd object Development_OLTP object-group

Note to outside_access_in access from the 2nd IP Eiresoft access list

outside_access_in list extended access allow DM_INLINE_SERVICE_9 object Eiresoft_2nd object OLTP_Failover object-group

outside_access_in list extended access allow DM_INLINE_SERVICE_10 object Payback_Office object Dev_Test_Webserver object-group

outside_access_in list extended access allow DM_INLINE_SERVICE_11 object Payback_Office object External_TMC_OLTP object-group

outside_cryptomap to access extended list ip 192.168.100.0 allow 255.255.255.0 192.168.10.0 255.255.255.0

pager lines 24

Enable logging

asdm of logging of information

Outside 1500 MTU

Within 1500 MTU

ICMP unreachable rate-limit 1 burst-size 1

don't allow no asdm history

ARP timeout 14400

no permit-nonconnected arp

NAT (inside, outside) source Dynamics one interface

NAT (inside, outside) static source CIX-host-1 External_CIX-host-1

NAT (inside, outside) static source Development_OLTP External_Development_OLTP

NAT (inside, outside) static source TMC_Webserver External_TMC_Web

NAT (inside, outside) static source TMC_OLTP External_TMC_OLTP

NAT (inside, outside) static source OLTP_Failover External_OLTP_Failover

NAT (inside, outside) static source Dev_Test_Webserver External_Dev_Test_Webserver

NAT (inside, outside) static source NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 non-proxy-arp-search of route static destination

NAT (inside, outside) static source NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

Access-group outside_access_in in interface outside

Route outside 0.0.0.0 0.0.0.0 84.39.233.49 1

Timeout xlate 03:00

Pat-xlate timeout 0:00:30

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

identity of the user by default-domain LOCAL

the ssh LOCAL console AAA authentication

Enable http server

http 92.51.193.156 255.255.255.252 outside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac

Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac

Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac

Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac

Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac

Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac

Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit

Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac

Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac

Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac

Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit

Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac

Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit

Crypto ipsec ikev2 ipsec-proposal OF

encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set pfs
peer set card crypto outside_map 1 92.51.193.158
card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 1jeu ikev2 AES AES192 AES256 3DES ipsec-proposal
outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 77.75.100.208 255.255.255.240 outside
SSH 92.51.193.156 255.255.255.252 outside
SSH timeout 5
Console timeout 0

dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
internal GroupPolicy_92.51.193.158 group strategy
attributes of Group Policy GroupPolicy_92.51.193.158
VPN-tunnel-Protocol ikev1, ikev2
username password 6e6Djaz3W/XH59zX gordon encrypted privilege 15
tunnel-group 92.51.193.158 type ipsec-l2l
tunnel-group 92.51.193.158 General-attributes
Group - default policy - GroupPolicy_92.51.193.158
IPSec-attributes tunnel-group 92.51.193.158
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:83b2069fa311e6037163ae74f9b2bec2
: end

Hello

There are some clear problems I see on a quick glance. These are not related to the actual VPN configuration but rather the NAT configurations.

All your configuration of NAT CLI format above are configured as manual NAT / double NAT in Section 1. This means that the appliance NAT configurations have been added to the same section of the NAT configurations and scheduling of the NAT inside this Section rules is the cause of the problem for the L2L VPN connection for some.

Here are a few suggestions on what to change

ASA1

Minimal changes

the object of the LAN network

192.168.10.0 subnet 255.255.255.0

being REMOTE-LAN network

255.255.255.0 subnet 192.168.100.0

NAT (inside, outside) 1 static source LAN LAN to static destination REMOTE - LAN LAN

no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 non-proxy-arp-search of route static destination

That means foregoing is first of all create 'object' that contain the local LAN and remote LANs. Then, it creates a NAT0 rule and adds to the top rules NAT. (number 1). It is essentially of at least one of the problems preventing the VPN operation or traffic that cross.

Finally, we remove the old rule that generated the ASDM. It would do the same thing if it has been moved to the top, but I generally find the creation of the 'object' with descriptive names easier on the eyes in the long term.

Other suggestions

These changes are not necessary with regard to the VPN L2L. Here are some suggestions how to clean a part of NAT configurations.

PAT-SOURCE network object-group

source networks internal PAT Description

object-network 192.168.10.0 255.255.255.0

object-network 192.168.20.0 255.255.255.0

object-network 192.168.40.0 255.255.255.0

NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source

No source (indoor, outdoor) nat Dynamics one interface

no nat (wireless, outdoors) source Dynamics one interface

no nat (servers, outside) no matter what source dynamic interface

The above configuration creates a "object-group" that lists all internal networks that you have dynamic PAT configured so far. It then uses the ' object-group ' in a command unique 'nat' to manage the dynamic PAT for all internal networks (with the exception of printers who had nothing at first). Then we remove the old PAT dynamic configurations.

Contains the command "nat" "car after" because it moving this "nat" configuration to the bottom of the NAT rules. For this reason its less likely to cause problems in the future.

network of the SERVERS object

subnet 192.168.20.0 255.255.255.0

network of the VPN-POOL object

192.168.50.0 subnet 255.255.255.0

NAT (servers, external) 2 static static source of destination of SERVERS SERVERS VPN-VPN-POOL

no nat (servers, external) static source NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 non-proxy-arp-search of route static destination

The above configuration is supposed to create a NAT0 configuration for traffic between the network and the pool of Client VPN server. To my knowledge the old configuration that remove us is not used because the traffic would have matched PAT rule dynamic server yet rather than this rule which is later in the NAT configurations and would not be addressed.

no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

It seems to me that network 192.168.1.0/24 is not configured from anywhere in your network. Therefore, the above 'nat' configuration seems useless, can be deleted. If I missed something and its use in then of course do not remove it.

ASA2

Minimal changes

the object of the LAN network

255.255.255.0 subnet 192.168.100.0

being REMOTE-LAN network

192.168.10.0 subnet 255.255.255.0

NAT (inside, outside) 1 static source LAN LAN to static destination REMOTE - LAN LAN

no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 non-proxy-arp-search of route static destination

That means foregoing is first of all create 'object' that contain the local LAN and remote LANs. Then, it creates a NAT0 rule and adds to the top rules NAT. (number 1). It is essentially of at least one of the problems preventing the VPN operation or traffic that cross.

Finally, we remove the old rule that generated the ASDM.

Other suggestions

PAT-SOURCE network object-group

object-network 192.168.100.0 255.255.255.0

NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source

No source (indoor, outdoor) nat Dynamics one interface

The above configuration is supposed to do the same thing with the other ASA. Although given that this network contains only a single subnet it cleans the "nat" configurations exist that much. But the order of the "nat" configurations is changed to avoid further problems with the NAT order.

no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

It seems to me that network 192.168.1.0/24 is not configured from anywhere in your network. Therefore, the above 'nat' configuration seems useless, can be deleted. If I missed something and its use in then of course do not remove it.

I suggest trying the changes related to VPN L2L first NAT0 configurations and test traffic. So who gets the work of connectivity, then you could consider changing other NAT configurations. There are other things that could be changed also in what concerns THAT static NAT servers but that probably better left for another time.

Hope this makes any sense and has helped

Remember to mark a reply as the answer if it answered your question.

Feel free to ask more if necessary

-Jouni

ASA 5505 VPN established, cannot access inside the network

Hi, I recently got an ASA 5505, and I spent weeks to find a way to set up a VPN on it.

After a few days, I finally found the solution to connect to my ASA with a VPN client yet and cannot access devices that are connected to the ASA.

Here is my config:

ASA Version 8.2 (5)
!
hostname asa01
domain kevinasa01.net
activate 8Ry2YjIyt7RRXU24 encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
switchport access vlan 5
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
interface Vlan5
No nameif
security-level 50
IP 172.16.1.1 255.255.255.0
!
passive FTP mode
DNS server-group DefaultDNS
domain kevinasa01.net
permit same-security-traffic intra-interface
Remote_Kevin_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.254.0 255.255.255.240
inside_nat0_outbound list of allowed ip extended access all 192.168.254.0 255.255.255.0
inside_nat0_outbound list of allowed ip extended access entire 192.168.1.0 255.255.255.0
sheep - in extended Access-list allow IP 192.168.254.0 255.255.255.0 192.168.1.0 255.255.255.0
access extensive list ip 192.168.254.0 outside_access_in allow 255.255.255.0 any
access extensive list ip 192.168.254.0 inside_access_in allow 255.255.255.0 any
pager lines 24
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
pool pool 192.168.254.1 - 192.168.254.10 255.255.255.0 IP mask
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (outside) 1 192.168.254.0 255.255.255.0
NAT (inside) 0 access-list sheep - in
NAT (inside) 1 192.168.1.0 255.255.255.0
NAT (inside) 1 0.0.0.0 0.0.0.0
Access-group outside_access_in in interface outside
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
management-access inside
dhcpd outside auto_config
!
dhcpd address 192.168.1.5 - 192.168.1.36 inside
dhcpd allow inside
!

a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal Remote_Kevin group strategy
attributes of Group Policy Remote_Kevin
value of server DNS 192.168.1.12 192.168.1.13
VPN - connections 3
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list Remote_Kevin_splitTunnelAcl
kevinasa01.NET value by default-field
username kevin mz6JxJib/sQqvsw9 password encrypted privilege 0
username kevin attributes
VPN-group-policy Remote_Kevin
type tunnel-group Remote_Kevin remote access
attributes global-tunnel-group Remote_Kevin
address-pool
Group Policy - by default-Remote_Kevin
IPSec-attributes tunnel-group Remote_Kevin
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
inspect the icmp error
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:2bb1da52d1993eb9b13c2f6dc97c16cd
: end

Thank you

Hello

I read your message quickly through my cell phone. I don't know why you have spent your config twice. Maybe a typo issue.

I see the acl sheep in the wrong way. I mean 192.168.254 are your pool VPN and 192.168.1.0 your local LAN.

The acl must be:

sheep - in extended access-list permit ip 192.168.1.0 255.255.255.0 192.168.254.0 255.255.255.0

For nat (inside), you have 2 lines:

NAT (inside) 1 192.168.1.0 255.255.255.0 ==> it is redundant as the 1 below does the same thing with more networks if there is inside side. You can delete it.
NAT (inside) 1 0.0.0.0 0.0.0.0

Why are you doing this nat (outside)?

NAT (outside) 1 192.168.254.0 255.255.255.0

Here are the first questions that I have seen by reading through my mobile. Let's change this and let me know. I'll take a look later with a computer (tonight or tomorrow)

Thank you.

PS: Please do not forget to rate and score as good response if this solves your problem.

On ASA 5505 VPN cannot access remote (LAN)

I have an ASA 5505 upward and running, all static NAT statements I need to forward ports to the internal services such as smtp, desktop remotely and it works very well, however I have set up an IPSEC vpn connection that authenticates to our DC and part works. However, after I connect and cannot ping anything on the local network or access services. I don't know what a NAT statement I have corrected. Here is the config. I really need to get this up and going tomorrow. Thanks for any help.

Tyler

Just remove the line of nat (outside) and ACL outside_nat0_outbound.

And talk about these statements:

IPSec-1 sysopt connection permit... (If it is disabled, you can check with sh run sysopt).

2, crypto isakmp nat traversal 10 or 20

3 no NAT ACL, mention your local subnets as the source and vpn client as the destination.

4, create the other ACL (ST) with different name and source and destination like no nat ACL.

5, then type nat (inside) 0 access-list sheep

6, in the dwgavpn group policy, talk to splittunnel tunnelspecified and mention the tunnel split ACL (ST).

Concerning

Cisco SG300 / ASA 5505 intervlan routing problem

Dear all

I have a problem with the configuration correctly sg300 layer 3 behind the ASA 5505 switch (incl. license more security)

The configuration is the following:

CISCO SG300 is configured as a layer 3 switch

VLAN native 1: 192.168.1.254, default route ip address (inside interface ASA 192.168.1.1)

VLAN defined additional switch

VLAN 100 with 192.168.100.0/24, default gateway 192.168.100.254

VLAN 110 with 192.168.110.0/24, default gateway 192.168.110.254

VLAN 120 with 172.16.0.0/16, default gateway 172.16.10.254

Of the VLANS (100,110,120) different, I am able to connect to all devices on the other VIRTUAL local networks (with the exception of Native VLAN 1; is not the ping requests)

From the switch cli I can ping my firewall (192.168.1.1) and all the other gateways of VLANs and vlan (VLAN1, 100, 110, 120) devices

Asa cli I can only ping my switch (192.168.1.254) port, but no other devices in other VLAN

My question is this. What should I change or installation in the switch configuration or asa so that other VLANs to access the Internet through the ASA. I will not use the ASA as intervlan routing device, because the switch does this for me

I tried to change the asa int e0/1 in trunkport (uplink port switch also), to enable all the VLANS, but as soon as I do that, I can not ping 192.168.1.254 ASA cli more.

Any help is greatly appreciated

Concerning

Edwin

Hi Edwin, because the switch is layer 3, the only necessary behavior is to ensure that default gateways to the computer are set on the SVI interface connection to the switch to make sure that the switch is transfer traffic wished to the ASA.

The configuration between the ASA and the switch must stay true by dot1q, such as the vlan all other, unidentified native VLAN tagged.

Also, if I'm not wrong, on the SAA you must set the security level of the port to 100.

-Tom
Please evaluate the useful messages

ASA 5505 VPN cannot access inside the host

I have access remote VPN configuration on an ASA 5505, but cannot access the host or the AAS when I connect through the VPN. I can connect with the Cisco VPN client and the VPN is on on the SAA and it shows that I am connected. I have the correct Ip address, but I can't ping or you connect to one of the internal addresses. I can't find what I'm missing. I have the VPN without going through the ACL interface. Because I can connect but not going anywhere I'm sure I missed something.

framework for configuration below

interface Vlan1

nameif inside

security-level 100

10.1.1.1 IP address 255.255.255.0

IP local pool xxxx 10.1.1.50 - 10.1.1.55 mask 255.255.255.0

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

Crypto-map dynamic outside_dyn_map 20 set pfs

Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

PFS set 40 crypto dynamic-map outside_dyn_map

Crypto-map dynamic outside_dyn_map 40 value transform-set ESP-3DES-SHA

Crypto-map dynamic inside_dyn_map 20 set pfs

Crypto-map dynamic inside_dyn_map 20 the value transform-set ESP-3DES-SHA

map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

outside_map interface card crypto outside

map inside_map 65535-isakmp ipsec crypto dynamic inside_dyn_map

inside crypto map inside_map interface

crypto ISAKMP allow inside

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

global service-policy global_policy

XXXXXXX strategy of Group internal

attributes of the strategy group xxxxxxx

banner value xxxxx Site Recovery

WINS server no

24.xxx.xxx.xx value of DNS server

VPN-access-hour no

VPN - connections 3

VPN-idle-timeout 30

VPN-session-timeout no

VPN-filter no

Protocol-tunnel-VPN IPSec

Split-tunnel-policy tunnelall

by default no

disable secure authentication unit

disable authentication of the user

user-authentication-idle-timeout no

disable the IP-phone-bypass

disable the leap-bypass

disable the NEM

disable the NAC

NAC-sq-period 300

NAC-reval-period 36000

NAC-by default-acl no

the address value xxxxxx pools

enable Smartcard-Removal-disconnect

the firewall client no

WebVPN

url-entry functions

Free VPN of CNA no

No vpn-addr-assign aaa

No dhcp vpn-addr-assign

tunnel-group xxxx type ipsec-ra

tunnel-group xxxx general attributes

xxxx address pool

Group Policy - by default-xxxx

blountdr group of tunnel ipsec-attributes

pre-shared-key *.

Missing nat exemption for vpn clients. Add the following and you should be good to go.

inside_nat0_outbound list of allowed ip extended access any 192.168.10.0 255.255.255.0

NAT (inside) 0-list of access inside_nat0_outbound

Ikev1 ASA 5505 VPN connection error

Hello

I had previously defined our VPN using IPsec on our ASA 5505 via the ASDM. It was workign fine until an outtage power loses my settings on the device. (possibly a recording of order is not pressed)

Now when I try and put in place, once again I am recieveing an error to port binding. I have configured as normal using the wizard and activate split defintion and exempt the network inside.

The isssue when you apply the settings that I get is:

"[ERROR] crypto ikev 1 activate outdoors.

IkevReceiverInit, cannot bind the port. "

When I try to connect to the VPN I then get an error "the server cannot be reached" or something similar to that...

Could someone please shed some light on what can cause this problem?

Best regards, the Paris

William.

Hello

Thanks for the information!

We will need to know why this host using UDP 4500 and if this host really needs to use this port.

What type of application is running on this host?

What is a host internal or external?

You may also block the host on the SAA on the incoming interface to avoid the use of the UDP 4500 port using a group of access (outside or inside). Don't forget that you will need a ip to allow a at the end of the ACL to avoid any problems. Another option would be to use IKEv1/IPsec over TCP

IKEv1/IPsec over TCP allows a Cisco VPN client operate in an environment in which IKEv1 or standard ESP may not work or may work only with the change of the existing firewall rules. IPsec over TCP encapsulates IPsec protocols both IKEv1 in a TCP packet as and allows a tunnel secure two firewalls and NAT and PAT devices. This feature is disabled by default.

The default port is 10000.

HostName (config) # ikev1 crypto ipsec-over-tcp

You also need to activate on the VPN client under the profile.

Change > Transport > IPSec over TCP.

I hope this helps.

Luis.

ASA 5505 VPN remote cannot access with my local network

Hello guys, I have a problem with my asa 5505 remote VPN access to the local network, the VPn connection works well and connected, but the problem is that I can't reach my inside connection network of 192.168.30.x, here's my setup, please can you help me

ASA Version 8.2 (1)

!

!

interface Vlan1

nameif inside

security-level 100

192.168.30.1 IP address 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

IP 155.155.155.10 255.255.255.0

!

interface Vlan5

No nameif

no level of security

no ip address

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

passive FTP mode

inside_nat0_outbound list of allowed ip extended access any 192.168.100.0 255.255.255.240

pager lines 24

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

IP local pool vpn-pool 192.168.100.1 - 192.168.100.10 mask 255.255.255.0

ICMP unreachable rate-limit 1 burst-size 1

don't allow no asdm history

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 0-list of access inside_nat0_outbound

NAT (inside) 1 0.0.0.0 0.0.0.0

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

dynamic-access-policy-registration DfltAccessPolicy

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

life crypto ipsec security association seconds 28800

Crypto ipsec kilobytes of life - safety 4608000 association

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

outside_map interface card crypto outside

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

Telnet timeout 5

SSH timeout 5

Console timeout 0

dhcpd outside auto_config

!

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

WebVPN

Mull strategy of Group internal

attributes of the Group mull strategy

Protocol-tunnel-VPN IPSec

username privilege 0 encrypted password eKJj9owsQwAIk6Cw xxx

VPN-group-policy Mull

type mull tunnel-group remote access

tunnel-group mull General attributes

address vpn-pool pool

Group Policy - by default-mull

Mull group tunnel ipsec-attributes

pre-shared-key *.

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

!

global service-policy global_policy

context of prompt hostname

Yes, you will need to either configure split tunnel so that internet traffic goes out through your local Internet service provider, GOLD / directed by configuration current you are tunneling all traffic (internet traffic Inc.) to the ASA, then you will need to create NAT for internet traffic.

To set up a tunnel from split:

split-acl access-list allowed 192.168.30.0 255.255.255.0

attributes of the Group mull strategy

Split-tunnel-policy tunnelspecified

Split-tunnel-network-list value split-acl

I hope this helps.

ASA 5505 VPN easy & 3rd / DMZ interface

We have many new and very small remote sites that need to connect via an ASA5505 via easy VPN. Works without a problem and we have the configuration and the process nailed.

The challenge that I received today involve non standard remote sites, where I need to set up a third interface an ASA 5505 and allow it to go directly to the Internet and do not go through the VPN. Configuration of the third interface, assignment and configuration of the ACLS / NAT (PAT) are towards the front.

The challenge I face and have not been able to find a direct response to is if it is possible to have the easy process of extension of VPN traffic avoidance. Currently, traffic is down the tunnel which is not what I want.

I'm afraid I'll have to build conventional site-to-site VPN configurations which is not a huge problem, if it breaks all the methods of maintenance/operations, process, and I have to spend time training of the support team how to detect the differences. Either yes I can build if someone else needs the support, which means different is a problem.

Thank you

What version of the software you run ASA?

I found this in the configuration guide that suggests that only the highest security level interface is encrypted by the easy VPN tunnel, if you run ASA version 7.2.3 and above:

http://www.Cisco.com/en/us/docs/security/ASA/asa82/configuration/guide/ezvpn505.html#wp1025408

So, if your DMZ does not have the same level of security as your inside interface, DMZ traffic does not pass through the tunnel.

Also, do you have split tunnel configured on the easy VPN server for this easy VPN clients group?

Issue of ASA 5505 VPN licenses

I have three places that I want to connect via vpn site-to-site deployed on three ASA 5505. How is the term 'Peers' in the text of license, affecting my script? Each peer ASA in a solution from site to site, or each transmission of user data in the established tunnel also counted?

Users, passing through the tunnel of site to another are not counted. Only the peers themselves.

ASA 5505 VPN Ping problems

Similar Questions

Maybe you are looking for