Qusetion

Similar Questions

• IOM to AD provisioning error Qusetion: Newbie

  Hi Experts,
  I managed to get after the installation of basic in my xp m/c with all the valuable help of this forum!
  I'm trying to set up users of the IOM to AD and following the tutorial mentioned below.
  
  http://www.Oracle.com/technology/OBE/fusionmiddleware/im1014/oim/ad_provision/prov2ad.html_
  Now, I get the error in the task of the user to create which is rejected below.
  Answer: AD. SELECT_ORGANIZATION_OR_CONTAINER
  
  Description of the response: Please select the organization or the container name to the name of organization search
  
  Notes:
  I also noticed the below thread associated with this error and follow the steps.
  Commissioning: IOM to Active Directory users
  There are three things mentioned in this thread and do not know that one has actually solved...
  (1) run reconciliation of research before you run the actual commissioning. «: reconfigure the attributes "Research Base"and"the name of resource COMPUTING ' in scheduled tasks: 'AD Group research Recon' and 'AD organization research Recon'.»
  For the attributes that should be reconfigured?
  (2) "open research for organizations, and then add the value cn = users. Then you can put a default on your form of process. »
  I questioned and set cn = Users under Code & Decode... It's always the same.
  
  (3) "" your form of current process has the required attribute on the password field, so that pre-fill them adapter. If you open the form designer, click the button to create a new version.
  I do not find the place to remove these elements other than the tabs to make the current and active version.
  
  NOTE: I have no target system (AD) in my m/c because it is Win Xp, trying to provision on the side of the IOM aimed learning... This could be the reason for the problem I face in? I'm sorry for this stupid question... :-)
  As I'm still beginner or IOM model might please explaiin exactly the thing to follow.
  
  Thank you
  Sundas7

  I will try to respond to your request with the best of my knowledge...

  Major problem with your configured, you do not have AD :)

  1. it must contain the parameters of AD to the search context IE = which will take place in the research group where up to try to remove the ad group name and the organization name and fill in the list of choices.

  2. This is the default container in real announcement it will look like cn = users, dc = test, dc = com and your IOM uses this parameter to create the user

  3. last part, I do not have it... can you explain little more

  Everything is new in this technology at some point :)
  everyone is learning

  Hope this helps you

  VM

• Qusetion SQL please

  Hi all
  I want to run this query, for example in the SCOTT user please
  I want to retrieve ename, deptno, max (sal) to emp and display the max and deptno sal and the name of the person who will get the max sal that I am trying to do this
  {select ename, deptno, max (sal) of emp
  Group of ename, deptno}
  It will give me below
  
  ENAME, DEPTNO MAX (SAL)
  ---------- ---------------------- ----------------------
  SMITH 20 800
  20 2975 JONES
  FORD 3000 20
  2450 10 CLARK
  20 3000 SCOTT
  TURNER 30-1500
  JAMES 30 950
  KING 10 5000
  20 1100 ADAMS
  30 2850 BLAKE
  10 1300 MILLER
  30 1600 ALLEN
  WARD 30 1250
  30 1250 MARTIN
  
  
  
  but my question is what is the name that will get the sal max... Please help me with this
  
  I mean the result below
  Ename, deptno max (sal)
  10 3000 SCOTT
  FORD 5000 20
  30 1600 ALLEN
  
  Published by: khalidoracleit on July 6, 2010 04:22

  select b.empno, b.ename, a.sal, a.deptno
  from   emp b, (select  deptno, max(sal) sal
          from emp
          group by deptno) a
  where   a.sal = b.sal and
          a.deptno = b.deptno        
  

• Qusetion SQL error

  I have a question in the document oracle certificate and they give the solution with it included, so the question is
  Evaluate the SQL statement:
  Select LPAD (salary, 10, *) from emp where emp_id = 1001;
  If the employee with 1001 EMP_ID has a salary of 17000, what is displayed?
  
  A.17000.00
  B.17000* *.
  C. * 170.00
  D. * 17000.00
  E. a statement error
  And they give the solution is C
  
  But I think it's WRONG because it takes the E because * must have ' *', because it is question of certificate Oracle and if I add to the query (and salary = 17000) his will give anything you agree with me?

  Yes, you are right.

  SQL> Select LPAD (17000,10,*) from dual;
  Select LPAD (17000,10,*) from dual
                        *
  ERROR at line 1:
  ORA-00936: missing expression
  
  SQL>
  SQL> Select LPAD (17000,10,'*') from dual;
  
  LPAD(17000
  ----------
  *****17000
  
  SQL>
  

  Asif Momen
  http://momendba.blogspot.com

• "Scratch" feature Sports Watch :)

  Hi all!

  Already 6 months to my 'Sport Watch 42'. I really like it, but there's one thing large 'print to spoil. ION - x glass is a low point in this very good product (I already agreed battery of low capacity and the weakness "to life".) I'm really frustrated that apple decides not to install Sapphire in a sport version. (The main point for 'sport' product name is waiting for some more useful "harder" of the product, than other versions of "business/style")

  So, I have 3 main qusetion:

  (1) is it possible to replace 'officially' ion - x in saphire?

  (2) it is or will be in advance, kind of official 'polishing' service program?

  (3) is there another advises Apple, to maintain the good condition of ion - x without foils of protective glasses (they look terrible and spoil the entire view).

  Best regards!

  Hello

  Apple does not currently of each service (questions 1 and 2).

  I'm afraid that nobody here can tell you what that this either on Apple's plans for services or products without notice (it is a community of technical support user-based) and it is not allowed here to speculate, either.

  A good quality screen protector (film type) can be effective in concealing or reducing the visibility of traces on the screen, as well as to provide some protection against future damage.

  The screen has a coating resistant to fingerprints fingerprints and repellent. It is normal that this coating to wear away under normal conditions of use. Apple recommends not using products cleaning or polishing or Polish the watch with abrasives; These will carry away the coating and can also scratch the glass under.

• The initial backup by Lenovo restore a recovery key will help me?

  So my pc is not starting its blue showing the screen at startup windows screen... the error is PAGE_FAULT_IN_NONPAGED_AREA... When I click on the button next to the switch... then when I go into a key recovery... He tells me to choose either a restore of backup of the user or to restore the initial backup of form... but my qusetion is that if I select restore from a backup of the original... my files, games and movies will be there or they will be deleted?

  
  

• Length of graphics card?

  Hello, I own a HP HPE-510F, and my qusetion is what is the maximum length of a graphics card I install in the case. I intend to buy an EVGA GTX 570 and there are two different models of it, a 9 "one with a thumb and a 10.5". I'd rather have the 10.5 inch one because I think it looks better, but that's just me being nit picky. Ultimately if there must be a problem I'll settle for the model 9 inches.

  I also, as a side note a Corsair TX650M, so in terms of generating enough power, I should be fine.

  DrSesma, welcome to the forum.

  The card 9 "should work in the computer.  Normally, I recommend a card is more than 9 ".  Some members have used a card which is 9.25 "successfully.

  If your problem is solved, please click "accept as a Solution.

• How to add fields on a screen at a particular location where a domain manager is already added

  Hello

  Issue in the user Desiging interface...

  I have a screen where I use two HorizontalFieldManager covering first half and second half of the screen, now my qusetion is that I want to add a field to the second half of the screen but the field is added below the second half of the screen, I know why this is happening because the area of the screen is already filled by the two HorizontalFieldManager.

  So please suggest me how to add the field in the second half of the screen, which sector is already covered by HorizontalFieldManager.

  Here is my sample code...

  Top of HorizontalFieldManager = HorizontalFieldManager(NON_FOCUSABLE | nouveau FIELD_HCENTER |) FIELD_VCENTER);
  upper_part = new BitmapField (upper_bitmap);
  Upper.Add (upper_part);

  Low HorizontalFieldManager = new HorizontalFieldManager(NON_FOCUSABLE |) FIELD_HCENTER | FIELD_VCENTER);
  lower_part = new BitmapField (lower_bitmap);
  Lower.Add (lower_part);

  VerticalFieldManager body = new VerticalFieldManager(NON_FOCUSABLE |) FIELD_HCENTER | FIELD_VCENTER);
  Body.Add (Upper);
  Body.Add (Lower);
  Add (Body);

  Thanks a lot... :)

  Are you using the bitmap for horizontal substantive adding upper and lower field area manager

  If yes don't do that add background to the Manager of horizontal field like this:

  horizontalFieldManager.setBackground (BackgroundFactory.createBitmapBackground (bitmap));

• Upgrade to Windows 7 64-bit in earlier upgrade Vista 32 bit OEM

  I have searched this forum for an answer to my qusetion below but can't find descriobe my script, I hope someone here can help me understand if my upgrade is viable before you start along backup and the resettlement process.

  I bought my PC with Windows Vista Home Premium 32 bit OEM.

  When Windows 7 was launched I purchsaed the upgrade to Home Premium disc which included 32-bit and 64-bit.

  At the time many applications that I used was not compatible 64 bit so I simply upgrded to Windows 7 32 bit, I activated and have used since.

  I am now find my system a bit slow and the most cost-effective upgrade would be to increase my ram from 2 GB to 8 GB, but only if I can also move to 64-bit.

  What I read in other posts, the upgrade disks I have purchsed enabled me to move from 32-bit Vista either 32-bit or 64-bit Windows 7.

  My qusetion is:-

  Having already made the choice to upgrade my Vista 32 bit OEM for Windows 7 32 bit and activated this version, I can now reinstall using the same product keys but this time using the 64-bit installation disk?

  I hope I'm not alone here, and others will be tried this and can therefore confirm the result.

  Kind regards

  Robert

  You can use the key to existing product that you originally used to install and activate the Windows 7 Home Premium 32-bit.

  Installation of Windows 7 Home Premium 64-bit will not necessarily make your computer faster however.

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  Boot from the DVD 64 bit Windows 7

  For information about how to modify your BIOS options to boot from the DVD drive, see the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  

  Once your computer is configured to boot from the DVD, you should see this option.

  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Split tunneling cannot access remote host

  Hi guys,.

  Having this problem by which I am able to connect the Anyconnect client but unable to ping / access of remote servers. See below for the config of the SAA;

  Any ideas would be a great help, thank you!

  ASA Version 9.1 (1)

  !

  ASA host name

  enable the encrypted password xxxxxxx

  xxxxxxxxxxxxx encrypted passwd

  names of

  mask of local pool AnyPool 10.0.0.1 - 10.0.0.10 IP 255.255.255.0

  !

  interface GigabitEthernet0/0

  nameif outside

  security-level 0

  IP address 203.106.x.x 255.255.255.224

  !

  interface GigabitEthernet0/1

  nameif inside

  security-level 99

  IP 172.19.88.254 255.255.255.0

  !

  interface Management0/0

  management only

  nameif management

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  passive FTP mode

  clock timezone 8 MYT

  the SVR object network

  Home 172.19.88.11

  e-mail server in description

  network of the NETWORK_OBJ_172.19.88.0_24 object

  172.19.88.0 subnet 255.255.255.0

  network of the VPN-POOL object

  10.0.0.0 subnet 255.255.255.0

  object-group Protocol TCPUDP

  object-protocol udp

  object-tcp protocol

  object-group service DM_INLINE_SERVICE_0

  ICMP service object

  area of service-purpose tcp - udp destination eq

  the destination hostname eq tcp service object

  the purpose of the tcp destination eq https service

  the purpose of the tcp destination eq imap4 service

  the purpose of the tcp destination eq nntp service

  the purpose of the tcp destination eq pop3 service

  the purpose of the tcp destination eq smtp service

  the purpose of the tcp destination eq telnet service

  Outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_0 any object SVR

  Outside_access_in list extended access allow TCPUDP of object-group a

  Outside_access_in access-list extended ip any any idle state to allow

  Internal_access_in list extended access allow TCPUDP of object-group a

  Internal_access_in access-list extended ip any any idle state to allow

  SPLIT_TUNNEL list standard access allowed 10.0.0.0 255.255.255.0

  pager lines 24

  Enable logging

  timestamp of the record

  exploitation forest-size of the buffer 16384

  buffered logging critical

  asdm of logging of information

  Debugging trace record

  exploitation forest flash-bufferwrap

  record level of the rate-limit 1000 1 2

  management of MTU 1500

  MTU 1500 internal

  Outside 1500 MTU

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 711.bin

  don't allow no asdm history

  ARP timeout 14400

  no permit-nonconnected arp

  !

  the SVR object network

  203.106.x.x static NAT (indoor, outdoor)

  !

  source of auto after the cessation of NAT (inside, outside) dynamic interface

  Internal_access_in in interface internal access-group

  Access-group Outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 203.106.23.97 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL

  the ssh LOCAL console AAA authentication

  LOCAL AAA authorization command

  Enable http server

  http 192.168.1.0 255.255.255.0 management

  http authentication certificate management

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

  No vpn sysopt connection permit

  Crypto ipsec ikev2 ipsec-proposal OF

  encryption protocol esp

  Esp integrity sha - 1, md5 Protocol

  Crypto ipsec ikev2 proposal ipsec 3DES

  Esp 3des encryption protocol

  Esp integrity sha - 1, md5 Protocol

  Crypto ipsec ikev2 ipsec-proposal AES

  Esp aes encryption protocol

  Esp integrity sha - 1, md5 Protocol

  Crypto ipsec ikev2 ipsec-proposal AES192

  Protocol esp encryption aes-192

  Esp integrity sha - 1, md5 Protocol

  Crypto ipsec ikev2 AES256 ipsec-proposal

  Protocol esp encryption aes-256

  Esp integrity sha - 1, md5 Protocol

  Crypto ipsec pmtu aging infinite - the security association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF

  card crypto Outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  Outside_map interface card crypto outside

  Crypto ca trustpoint ASDM_TrustPoint0

  Terminal registration

  name of the object CN = ASA

  Configure CRL

  Crypto ca trustpoint Anyconnect_TrustPoint

  registration auto

  name of the object CN = ASA

  anyconnect_rsa key pair

  Configure CRL

  Crypto ca trustpoint _SmartCallHome_ServerCA

  Configure CRL

  trustpool crypto ca policy

  string encryption ca Anyconnect_TrustPoint certificates

  IKEv2 crypto policy 1

  aes-256 encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  IKEv2 crypto policy 10

  aes-192 encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  IKEv2 crypto policy 20

  aes encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  IKEv2 crypto policy 30

  3des encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  IKEv2 crypto policy 40

  the Encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  Crypto ikev2 activate out of service the customer port 443

  Crypto ikev2 access remote trustpoint Anyconnect_TrustPoint

  Telnet timeout 3

  SSH 172.19.88.0 255.255.255.0 internal

  SSH 0.0.0.0 0.0.0.0 outdoors

  SSH timeout 15

  Console timeout 0

  management of 192.168.1.100 - 192.168.1.200 addresses dhcpd

  enable dhcpd management

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  NTP server 119.110.97.148 prefer external source

  SSL-trust outside Anyconnect_TrustPoint point

  WebVPN

  allow outside

  AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1

  AnyConnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2

  AnyConnect image disk0:/anyconnect-linux-2.5.2014-k9.pkg 3

  AnyConnect profiles AnyConnect_client_profile disk0: / AnyConnect_client_profile.xml

  AnyConnect enable

  attributes of Group Policy DfltGrpPolicy

  VPN-tunnel-Protocol ikev1, ikev2 ssl clientless ssl ipsec l2tp client

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list SPLIT_TUNNEL

  Group Policy 'GroupPolicy AnyConnect' internal

  Group Policy attributes "GroupPolicy AnyConnect"

  value of server WINS 172.19.88.11

  value of server DNS 172.19.88.11

  SSL VPN-tunnel-Protocol ikev2 client ssl clientless

  WebVPN

  AnyConnect value AnyConnect_client_profile type user profiles

  attributes global-tunnel-group DefaultWEBVPNGroup

  address pool AnyPool

  tunnel-group "AnyConnect" type remote access

  attributes global-tunnel-group "AnyConnect".

  address pool AnyPool

  strategy-group-by default "GroupPolicy AnyConnect"

  tunnel-group "AnyConnect" webvpn-attributes

  Group-alias "AnyConnect" activate

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  Hi Max,.

  Please send me the output of 'see the anyconnect vpn-sessiondb' once connected with VPN.

  And try to add the following configuration and see if that helps:

  NAT (inside, outside) 1 static source NETWORK_OBJ_172.19.88.0_24 NETWORK_OBJ_172.19.88.0_24 static destination VPN-VPN-POOL no-proxy-arp-route search

  And one more qusetion do you use split tunnel? If yes then you must make the following changes, because your split tunnel is incorrect, in the split tunnel, you have configured the address pool of vpn. Please make the following change:

  no access list SPLIT_TUNNEL standards not allowed 10.0.0.0 255.255.255.0

  Standard access list SPLIT_TUNNEL allow 172.19.88.0 255.255.255.0

  Group Policy attributes "GroupPolicy AnyConnect"

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list SPLIT_TUNNEL

  Let me know if this can help, or if you have any questions, more about it.

  Thank you

  Jeet Kumar

• Question must be answered.

  Hello, a few days ago, that I decided buy a new HP laptop, I found a lot of laptops with different specifications and finally I decided to buy one that is the peculiarity of these specifications:

  HP Pavilion DV6:

  Intel Corei7-2670QM 2 GHz/6 Mega Cash,.

  RAM 8 GB,

  HD 500 GB,

  AMD Radeon 6670 1 GB.

  My qusetion is: I need to know the what is the exact number of this model (Tip: HP Pavilion DV6t *) and I need to know if this model able to view the 3D using 3D glasses?

  Thank you in advance.
  

  
  

  Hello

  As far as I know, there is a single model with 3D display and it is HP ENVY 17 3D Edition.

  Note:

  Press "more" to expand the list of templates after you have clicked on the link.

  If the store said anything else then tell them you want to see the presentation in 3D on this subject.

• Increase the number in the option box

  Using jdeveloper 11.1.2.4.

  I have a table that has the following attributes

  Qusetion - out of text box

  Yes – Select one radio has only a single value yes

  None - Select a radio is not only a single value of

  I dragged and dropped the table as an af:table when my user clicks on the radio button yes I want a county to increase

  My scenario:

  [Keywords RB - Radio button O/P TB - exit TextBox]

  Question yes no

  Question 1 RB RB

  Question 2 RB RB

  Issue N RB RB

  Number of selected Yes TB O/P

  The O/P TB, I need to display the number of Yes selected.

  Any help would be appreciated.

  KT

  I asked about variable, how you have defined it in the bean?

  Assume that the initial value is - int i = 0;

  now on the change in value when you increase its value to 1, check this second when VCE ius called what is the initial value of i

  because in the case of the scope of the request, the variable is initialized every time while it was possible that it returns 1 whenever

  but in the case of view range, it should work fine

  Share of the variable code and rebuild your project and run again

  Since my previous commnet.

  You can take a variable at the bean and create its getter and setter and on option button valuechange event increase and decrease its value

  You must write the code to increase or decrease the value of i according to your selection

  Ashish

• Tips to upgrade Compaq Presario CQ41-208AU

  Hello

  I bought a Compaq Presario CQ41-208AU, I actually bought for normal household use, but some games compatible DirectX 10 does not work well in this notebook, 3D images are well filtered and I get low rates.

  A particular game, I can cite is GTA IV, I play to the lowest possible resolution of 800 x 480 and again, get low frame rates. IM using Windows7 Ultimate 32 bit, on an AMD Turion II Dual - core M520, with 2 GB RAM system (1.75 GB usable) and a chipset AMD M880G with ATi Mobility Radeon HD4200. I know that the specification is very poor, so I want to update if possible. Can you suggest me if I need to chage the motherboard inorder to change the graphics card. I like the look of this laptop very much as he looks smart and I'm not thinking of changing, I'd rather spend the money to upgrade its interiors. Please help me and offer me on what material is appropriate for the DirectX 10 game at good pace.

  Sorry I didn't that I posted the Original qusetion in the computers section of office.

  Reyhan

  It is not just any way to improve the graphics. Even if you could buy a new motherboard with better graphics, when all is said and done it would be cheaper and way more easy to simply sell yours and buy one with the desired specifications. Even put graphics on the cards at level mothers CQ41 replacement is a Radeon 4350 I believe which is only a little better than you and the recommended full Board would require likely case mods to fit your laptop. Talk of earrings on a pig!

• How can show what user name run from data base users in report page

  How can show what user name of user login to report 10g

  Another qusetion I create report empolyee 012343 identification number but 12343 zehro report shows not how can set it

  someone guide me

  to define the column as a number or character type?

  If it's the number, you can try a format mask with a '099999' 0. I think so.

  or you can select it as to_char (...)

• Reset the password of Root ESX 3.0.1

  I'm looking to reset the password on an ESX 3.0.1 host where I have an another account setup.  It's as easy as just connect to the ESX host via the VI Client with another account (this is preferred) and reset the root password in there? I presume that this wil have no impact to the performance of services?

  I know there is a way to do it through the console to start up but my host is in a Data Center remote with no active bit and really, really, I don't want to have to explain the steps to a data center operator, I'll end up banging my head on the desk as always.

  Thanks in advance guys

  See you soon

  D.Misbehavis

  The post, I'm gathering you want to change, but still actually have the root password, so this qusetion is not coming from a recovery access problem, OK? So I guess you still have your original passwd ROOT.

  Since the VIC? Not sure is it possbile to touch and actually "passwd" root.

  But you can grant shell access of account (from the CIE), SSH to the host, "su -" to the root, then ("passwd") to modify the passwd for root.

  Other that you would have to boot into single user and run passwd recovery in this way.

  Hope this helps,

  D