Site to site ASA 5505 VPN does not

Similar Questions

• VPN from Site to Site ASA 5505 booting do not

  I have two ASA 5505 running 8.4 and I tried using the VPN Wizard and the CLI, but I'm not able to get peers to initialze.  I watched other configs do not see what is missing. I tried followed the package through the ASDM and its not even seen the VPN tunnel and continues to try to go to the internet.  I have attached two configs for assistance.

  I'm glad you thought the problem and it's gotten the tunnel to initialize. Thanks for posting to the forum and stating what you have found the problem and how you fixed it. It is a good reminder of the importance of ensuring that encryption card corresponds to both ends. Maybe now, you can mark this as resolved issue and this would leave other readers know that there is a solution to this problem here.

  HTH

  Rick

• VPN from Site to Site of 2600 NSA does not work after upgrade to 6.2.0.1/6.2.2.0 6.2.0.0 SonicOS

  Site to Site VPN using policy based or VPN type road works very well in NSA 2600 with SonicOS Enhanced 6.2.0.0 - 20n. However, in order to correct the poodle attacks on SSLv3, we improve our SonicOS to 6.2.0.1 - 24n and this make the VPN does not. We tried SonicOS 6.2.2.0 - 7n with the same result. However, the VPN works remotely locally, but not the reverse, i.e. one meaning outside of the local network. Here are the details of the VPN deployment:

  Distance: NetScreen SSG-5 or GSU - 320 M

  Local: SonicWall NSA-2600

  Policy type: Tunnel Interface

  Auth. method: IKE using preshared Secret

  IKE Phase 1 proposal: Main Mode, group 2, 3DES, SHA1

  Proposal of IPSec Phase 2: ESP 3DES SHA1

  Please advice if it is linked to the SSLv3 disabled on Ipsec or any setting that we can make the VPN works on SonicOS after 6.2.0.1, again thank you!

  After reading the Release Notes for Early Release SonicOS 6.2.2.0 - 12n NSA-2600, we have solved the problem easily. Here's the important part:

  IMPORTANT: SonicOS 6.2.2.0 includes a design change added in recent versions for the treatment of the traffic via the Interfaces of the VPN Tunnel. By default, NAT policies are now applied to this traffic. In SonicOS 6.2.0.0 and SonicOS 6.1.1.9 and 6.1.1.x earlier, traffic on the Interfaces of the VPN Tunnel was exempt from policies NAT. Transition one of these earlier versions to 6.2.2.0 may require configuration changes.

  In fact, the truth is since 6.2.0.1, they already have policies NAT for the Interfaces of the VPN Tunnel. So the solution, regardless of usage 6.2.0.1 or 6.2.2.0, is just to write your policy NAT there is source and services NAT to network strategy involved VPN Tunnel Interface, that will be fine. To be simple, just

  Original of the CBC	Definition of the CBC	Original dest	Definition of dest	SVC Original	Definition of SVC
  Any	Source language	Remote VPN network	Source language	Any	Source language

• How can I disable the 'top sites' history of cleaning does not remove this and confusing and a risk to privacy

  How can I disable the 'top sites' history of cleaning does not remove this and confusing and a risk to privacy.
  It also serves as the sites I want to keep are my favorites
  Is there an alternatively an add-on for this

  Hi Wayne_a,

  If you are concerened about your privacy you can turn off this feature:

  Disable the new tab Page

• It is so RADIANT user! I used to have Firefox until I upgraded to Windows 7, and when I clicked on the icon, it took me directly to my Yahoo site. Why he does not now?

  Until I upgraded to Windowsw 7, Firefox used to take me directly to my Yahoo site. Why he does not now? I used to really love Firefox, but I'm completely frustrated just trying to get the answer to this question. Maybe I should just ask, "How do we uninstall it? But I would like to be able to use Firefox like I did before. Thank you
  [email protected]

  Hi peggkel,

  You say that you just want to change your homepage to Yahoo? Do not worry, it is quite easy! You should take a look at the Knowledge Base How to set the home pagearticle.

  If this does not work, you should look at article unsaved Preferences.

  Hope this helps!

• I wan to save my history Web sites, but my computer does not record. I go to tools > options > privacy and try to "save history", but it goes back to "use the custom settings for history"... I'm all down on those checked so it should save, but it do

  I wan to save my history Web sites, but my computer does not record. I go to tools > options > privacy and try to "save history", but it goes back to "use the custom settings for history"... I'm all down on those checked so it should save, but it doesn't.

  Thank you for taking the time to help me!

• Site Web de Toshiba does not recognize my serial number of the Satellite A215-S7428

  Irregular deadlines. Site Web de Toshiba does not recognize my serial number. Someone at - he met who? I guess the alphabetic characters are uppercase. Serial number is 9 characters long with alpha characters at the two ends of the chain.
  Weird.
  Has anyone had problems to register their laptops?

  Wait a minute my friend. On website of Toshiba, you try to do this? I hope that you do not save the model of portable non-European on European support page.

  Am I mistaken or you're really trying to do? As far as I know, you have a model of cell phone US.

• ASA 5505 VPN sessions maximum 25?

  Hello friend´s

  The company I work when acquired several ASA 5505, so now we will be able to connect several branches at Headquarters. But, now, I know that the ASA 5505 just scalates to 25 VPN sessions, I think that it won´t be enough to support the operations of an office. I have a lot of questions about this:

  Is - what the number 25 menas supporting up to 25 L2L tunnels? Or it means 25 sessions, regardless of the amount of L2L tunnels?

  Is this the way number 25 supporting up to 25 users in the Branch Office? Or it means that a user can use several sessions?

  I'm the stage of testing in a laboratory where one PC connects to many applications, at - it now someone if there is a command in the SAA to check how many VPN sessions is used?

  Please, do not hesitate to ask as much as necessary information. Any comments or document will be appreciated.

  Kind regards!

  Hi Alex,

  The assistance session 25 ASA 5505 VPN as max for IKEv1 or IPSEC tunnels customers it could be up to 25 L2L tunnels or 25 users using ikev1 (Legacy IPSEC client) and another 25 sessions for Anyconnect or Webvpn in this case are used in function.

  To check how many sessions VPN is currently running, run the command 'Show vpn-sessiondb' and 'display the summary vpn-sessiondb '.

  Find the official documentation for the ASA5505 on the following link:

  http://www.Cisco.com/c/en/us/products/collateral/security/ASA-5500-series-next-generation-firewalls/datasheet-C78-733510.html

  Rate if helps.

  -Randy-

• After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault. Any ideas to fix this?

  After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault.  Any ideas to fix this?

  This was the solution!  The works of vpn as $ 1 million now.  I followed the instructions above to enter the uninstall program and selecting the repair option.  I rebooted the machine, then used the troubleshooting on vpn software compatibility option.  Selected Windows windows xp (service pack 2) as the correct software and cisco vpn client started right up.

  Thanks, Nick!

  Rick

• Cisco ASA 5505 VPN Site to Site

  Hi all

  First post on the forums. I have worked with Cisco ASA 5505 for a few months and I recently bought a 2nd ASA to implement tunnel VPN Site to Site. It seems so simple in the number of videos watched on the internet. But when I did he surprise it did work for me... I've removed the tunnels, a number of times and tried to recreate. I use the VPN Wizard in the SMA to create the tunnel. Both the asa 5505 of are and have the same firmware even etc..

  I'd appreciate any help that can be directed to this problem please.  Slowly losing my mind

  Please see details below:

  Two ADMS are 7.1

  IOS

  ASA 1

  Nadia

  :

  ASA Version 9.0 (1)

  !

  hostname PAYBACK

  activate the encrypted password of HSMurh79NVmatjY0

  volatile xlate deny tcp any4 any4

  volatile xlate deny tcp any4 any6

  volatile xlate deny tcp any6 any4

  volatile xlate deny tcp any6 any6

  volatile xlate deny udp any4 any4 eq field

  volatile xlate deny udp any4 any6 eq field

  volatile xlate deny udp any6 any4 eq field

  volatile xlate deny udp any6 any6 eq field

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  local pool VPN1 192.168.50.1 - 192.168.50.254 255.255.255.0 IP mask

  !

  interface Ethernet0/0

  switchport access vlan 2

  Speed 100

  full duplex

  !

  interface Ethernet0/1

  link Trunk Description of SW1

  switchport trunk allowed vlan 1,10,20,30,40

  switchport trunk vlan 1 native

  switchport mode trunk

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  No nameif

  no level of security

  no ip address

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP 92.51.193.158 255.255.255.252

  !

  interface Vlan10

  nameif inside

  security-level 100

  IP 192.168.10.1 255.255.255.0

  !

  interface Vlan20

  nameif servers

  security-level 100

  address 192.168.20.1 255.255.255.0

  !

  Vlan30 interface

  nameif printers

  security-level 100

  192.168.30.1 IP address 255.255.255.0

  !

  interface Vlan40

  nameif wireless

  security-level 100

  192.168.40.1 IP address 255.255.255.0

  !

  connection line banner welcome to the Payback loyalty systems

  boot system Disk0: / asa901 - k8.bin

  passive FTP mode

  summer time clock GMT/IDT recurring last Sun Mar 01:00 last Sun Oct 02:00

  DNS domain-lookup outside

  DNS lookup field inside

  domain-lookup DNS servers

  DNS lookup domain printers

  DNS domain-lookup wireless

  DNS server-group DefaultDNS

  Server name 83.147.160.2

  Server name 83.147.160.130

  permit same-security-traffic inter-interface

  network obj_any object

  subnet 0.0.0.0 0.0.0.0

  ftp_server network object

  network of the Internal_Report_Server object

  Home 192.168.20.21

  Description address internal automated report server

  network of the Report_Server object

  Home 89.234.126.9

  Description of server automated reports

  service object RDP

  service destination tcp 3389 eq

  Description RDP to the server

  network of the Host_QA_Server object

  Home 89.234.126.10

  Description QA host external address

  network of the Internal_Host_QA object

  Home 192.168.20.22

  host of computer virtual Description for QA

  network of the Internal_QA_Web_Server object

  Home 192.168.20.23

  Description Web Server in the QA environment

  network of the Web_Server_QA_VM object

  Home 89.234.126.11

  Server Web Description in the QA environment

  service object SQL_Server

  destination eq 1433 tcp service

  network of the Demo_Server object

  Home 89.234.126.12

  Description server set up for the product demo

  network of the Internal_Demo_Server object

  Home 192.168.20.24

  Internal description of the demo server IP address

  network of the NETWORK_OBJ_192.168.20.0_24 object

  subnet 192.168.20.0 255.255.255.0

  network of the NETWORK_OBJ_192.168.50.0_26 object

  255.255.255.192 subnet 192.168.50.0

  network of the NETWORK_OBJ_192.168.0.0_16 object

  Subnet 192.168.0.0 255.255.0.0

  service object MSSQL

  destination eq 1434 tcp service

  MSSQL port description

  VPN network object

  192.168.50.0 subnet 255.255.255.0

  network of the NETWORK_OBJ_192.168.50.0_24 object

  192.168.50.0 subnet 255.255.255.0

  service object TS

  tcp destination eq 4400 service

  service of the TS_Return object

  tcp source eq 4400 service

  network of the External_QA_3 object

  Home 89.234.126.13

  network of the Internal_QA_3 object

  Home 192.168.20.25

  network of the Dev_WebServer object

  Home 192.168.20.27

  network of the External_Dev_Web object

  Home 89.234.126.14

  network of the CIX_Subnet object

  255.255.255.0 subnet 192.168.100.0

  network of the NETWORK_OBJ_192.168.10.0_24 object

  192.168.10.0 subnet 255.255.255.0

  network of the NETWORK_OBJ_84.39.233.50 object

  Home 84.39.233.50

  network of the NETWORK_OBJ_92.51.193.158 object

  Home 92.51.193.158

  network of the NETWORK_OBJ_192.168.100.0_24 object

  255.255.255.0 subnet 192.168.100.0

  network of the NETWORK_OBJ_192.168.1.0_24 object

  subnet 192.168.1.0 255.255.255.0

  object-group service DM_INLINE_SERVICE_1

  the tcp destination eq ftp service object

  the purpose of the tcp destination eq netbios-ssn service

  the purpose of the tcp destination eq smtp service

  service-object TS

  the Payback_Internal object-group network

  object-network 192.168.10.0 255.255.255.0

  object-network 192.168.20.0 255.255.255.0

  object-network 192.168.40.0 255.255.255.0

  object-group service DM_INLINE_SERVICE_3

  the purpose of the service tcp destination eq www

  the purpose of the tcp destination eq https service

  service-object TS

  service-object, object TS_Return

  object-group service DM_INLINE_SERVICE_4

  service-object RDP

  the purpose of the service tcp destination eq www

  the purpose of the tcp destination eq https service

  object-group service DM_INLINE_SERVICE_5

  purpose purpose of the MSSQL service

  service-object RDP

  service-object TS

  object-group Protocol TCPUDP

  object-protocol udp

  object-tcp protocol

  object-group service DM_INLINE_SERVICE_6

  service-object TS

  service-object, object TS_Return

  the purpose of the service tcp destination eq www

  the purpose of the tcp destination eq https service

  Note to outside_access_in to access list that this rule allows Internet the interal server.

  Notice on the outside_access_in of the access-list allowed:

  Comment from outside_access_in-list of FTP access

  Comment from outside_access_in-RDP access list

  Comment from outside_access_in-list of SMTP access

  Note to outside_access_in to access list Net Bios

  Comment from outside_access_in-SQL access list

  Comment from outside_access_in-list to access TS - 4400

  outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_1 any4 Internal_Report_Server

  access host access-list outside_access_in note rule internal QA

  Notice on the outside_access_in of the access-list allowed:

  Comment from outside_access_in-HTTP access list

  Comment from outside_access_in-RDP access list

  outside_access_in list extended access permitted tcp any4 object Internal_Host_QA eq www

  Notice on the outside_access_in of the access-list access to the internal Web server:

  Notice on the outside_access_in of the access-list allowed:

  Comment from outside_access_in-HTTP access list

  Comment from outside_access_in-RDP access list

  outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_3 any4 Internal_QA_Web_Server

  Note to outside_access_in to access list rule allowing access to the demo server

  Notice on the outside_access_in of the access-list allowed:

  Comment from outside_access_in-RDP access list

  Comment from outside_access_in-list to access MSSQL

  outside_access_in list extended access allowed object object-group DM_INLINE_SERVICE_4 any4 Internal_Demo_Server

  outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_5 any object Internal_QA_3

  Note to outside_access_in access to the development Web server access list

  outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_6 any object Dev_WebServer

  AnyConnect_Client_Local_Print deny any4 any4 ip extended access list

  AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq lpd

  Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol

  AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq 631

  print the access-list AnyConnect_Client_Local_Print Note Windows port

  AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 eq 9100

  access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol

  AnyConnect_Client_Local_Print list extended access permit udp host 224.0.0.251 any4 eq 5353

  AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol

  AnyConnect_Client_Local_Print list extended access permit udp host 224.0.0.252 any4 eq 5355

  Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print

  AnyConnect_Client_Local_Print list extended access permitted tcp any4 any4 EQ. 137

  AnyConnect_Client_Local_Print list extended access permitted udp any4 any4 eq netbios-ns

  Payback_VPN_splitTunnelAcl list standard access allowed 192.168.20.0 255.255.255.0

  permit outside_cryptomap to access extended list ip 192.168.10.0 255.255.255.0 192.168.100.0 255.255.255.0

  pager lines 24

  Enable logging

  information recording console

  asdm of logging of information

  address record

  [email protected] / * /.

  the journaling recipient

  [email protected] / * /.

  level alerts

  Outside 1500 MTU

  Within 1500 MTU

  MTU 1500 servers

  MTU 1500 printers

  MTU 1500 wireless

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm-711 - 52.bin

  don't allow no asdm history

  ARP timeout 14400

  no permit-nonconnected arp

  NAT (inside, outside) source Dynamics one interface

  NAT (wireless, outdoors) source Dynamics one interface

  NAT (servers, outside) no matter what source dynamic interface

  NAT (servers, external) static source Internal_Report_Server Report_Server

  NAT (servers, external) static source Internal_Host_QA Host_QA_Server

  NAT (servers, external) static source Internal_QA_Web_Server Web_Server_QA_VM

  NAT (servers, external) static source Internal_Demo_Server Demo_Server

  NAT (servers, external) static source NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 non-proxy-arp-search of route static destination

  NAT (servers, external) static source Internal_QA_3 External_QA_3

  NAT (servers, external) static source Dev_WebServer External_Dev_Web

  NAT (inside, outside) static source NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

  NAT (inside, outside) static source NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 non-proxy-arp-search of route static destination

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 92.51.193.157 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL
  the ssh LOCAL console AAA authentication
  Enable http server
  http 192.168.10.0 255.255.255.0 inside
  http 192.168.40.0 255.255.255.0 wireless
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal OF
  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec pmtu aging infinite - the security association
  card crypto outside_map 1 match address outside_cryptomap
  card crypto outside_map 1 set pfs
  peer set card crypto outside_map 1 84.39.233.50
  card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  outside_map card crypto 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
  outside_map interface card crypto outside
  trustpool crypto ca policy
  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha
  Group 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 10
  aes-192 encryption
  integrity sha
  Group 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 20
  aes encryption
  integrity sha
  Group 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 30
  3des encryption
  integrity sha
  Group 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 40
  the Encryption
  integrity sha
  Group 5
  FRP sha
  second life 86400
  Crypto ikev2 activate out of service the customer port 443
  Crypto ikev1 allow outside
  IKEv1 crypto policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH 77.75.100.208 255.255.255.240 outside
  SSH 192.168.10.0 255.255.255.0 inside
  SSH 192.168.40.0 255.255.255.0 wireless
  SSH timeout 5
  Console timeout 0

  dhcpd 192.168.0.1 dns
  dhcpd outside auto_config
  !
  dhcpd address 192.168.10.21 - 192.168.10.240 inside
  dhcpd dns 192.168.20.21 83.147.160.2 interface inside
  paybackloyalty.com dhcpd option 15 inside ascii interface
  dhcpd allow inside
  !
  dhcpd address 192.168.40.21 - 192.168.40.240 Wireless
  dhcpd dns 192.168.20.21 83.147.160.2 wireless interface
  dhcpd update dns of the wireless interface
  dhcpd option 15 ascii paybackloyalty.com wireless interface
  dhcpd activate wireless
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  internal Payback_VPN group strategy
  attributes of Group Policy Payback_VPN
  VPN - 10 concurrent connections
  Ikev1 VPN-tunnel-Protocol
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list Payback_VPN_splitTunnelAcl
  attributes of Group Policy DfltGrpPolicy
  value of 83.147.160.2 DNS server 83.147.160.130
  VPN-tunnel-Protocol ikev1, ikev2 clientless ssl
  internal GroupPolicy_84.39.233.50 group strategy
  attributes of Group Policy GroupPolicy_84.39.233.50
  VPN-tunnel-Protocol ikev1, ikev2
  Noelle XB/IpvYaATP.2QYm username encrypted password
  Noelle username attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  username Éanna encrypted password privilege 0 vXILR9ZZQIsd1Naw
  Éanna attributes username
  VPN-group-policy Payback_VPN
  type of remote access service
  Michael qpbleUqUEchRrgQX of encrypted password username
  user name Michael attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  username, password from Danny .7fEXdzESUk6S/cC encrypted privilege 0
  user name Danny attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  Aileen tytrelqvV5VRX2pz encrypted password privilege 0 username
  user name Aileen attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  Aidan aDu6YH0V5XaxpEPg encrypted password privilege 0 username
  Aidan username attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  username password 6e6Djaz3W/XH59zX gordon encrypted privilege 15
  shane.c iqGMoWOnfO6YKXbw encrypted password username
  username shane.c attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  Shane uYePLcrFadO9pBZx of encrypted password username
  user name Shane attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  username, encrypted James TdYPv1pvld/hPM0d password
  user name James attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  Mark yruxpddqfyNb.qFn of encrypted password username
  user name brand attributes
  type of service admin
  username password of Mary XND5FTEiyu1L1zFD encrypted
  user name Mary attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  Massimo vs65MMo4rM0l4rVu encrypted password privilege 0 username
  Massimo username attributes
  VPN-group-policy Payback_VPN
  type of remote access service
  type tunnel-group Payback_VPN remote access
  attributes global-tunnel-group Payback_VPN
  VPN1 address pool
  Group Policy - by default-Payback_VPN
  IPSec-attributes tunnel-group Payback_VPN
  IKEv1 pre-shared-key *.
  tunnel-group 84.39.233.50 type ipsec-l2l
  tunnel-group 84.39.233.50 General-attributes
  Group - default policy - GroupPolicy_84.39.233.50
  IPSec-attributes tunnel-group 84.39.233.50
  IKEv1 pre-shared-key *.
  remote control-IKEv2 pre-shared-key authentication *.
  pre-shared-key authentication local IKEv2 *.
  !
  Global class-card class
  match default-inspection-traffic
  !
  !
  World-Policy policy-map
  Global category
  inspect the dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  Review the ip options
  inspect the netbios
  inspect the pptp
  inspect the rsh
  inspect the rtsp
  inspect the sip
  inspect the snmp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect xdmcp
  inspect the icmp error
  inspect the icmp
  !
  service-policy-international policy global
  192.168.20.21 SMTP server
  context of prompt hostname
  no remote anonymous reporting call
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:d06974501eb0327a5ed229c8445f4fe1

  ASA 2

  ASA Version 9.0 (1)

  !

  Payback-CIX hostname

  activate the encrypted password of HSMurh79NVmatjY0

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  Speed 100

  full duplex

  !

  interface Ethernet0/1

  Description this port connects to the local network VIRTUAL 100

  switchport access vlan 100

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  switchport access vlan 100

  !

  interface Ethernet0/4

  switchport access vlan 100

  !

  interface Ethernet0/5

  switchport access vlan 100

  !

  interface Ethernet0/6

  switchport access vlan 100

  !

  interface Ethernet0/7

  switchport access vlan 100

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP 84.39.233.50 255.255.255.240

  !

  interface Vlan100

  nameif inside

  security-level 100

  IP 192.168.100.1 address 255.255.255.0

  !

  banner welcome to Payback loyalty - CIX connection line

  passive FTP mode

  summer time clock gmt/idt recurring last Sun Mar 01:00 last Sun Oct 02:00

  DNS domain-lookup outside

  DNS lookup field inside

  DNS server-group defaultDNS

  Name-Server 8.8.8.8

  Server name 8.8.4.4

  permit same-security-traffic inter-interface

  network obj_any object

  subnet 0.0.0.0 0.0.0.0

  network of the host-CIX-1 object

  host 192.168.100.2

  Description This is the VM server host machine

  network object host-External_CIX-1

  Home 84.39.233.51

  Description This is the external IP address of the server the server VM host

  service object RDP

  source between 1-65535 destination eq 3389 tcp service

  network of the Payback_Office object

  Home 92.51.193.158

  service object MSQL

  destination eq 1433 tcp service

  network of the Development_OLTP object

  Home 192.168.100.10

  Description for Eiresoft VM

  network of the External_Development_OLTP object

  Home 84.39.233.52

  Description This is the external IP address for the virtual machine for Eiresoft

  network of the Eiresoft object

  Home 146.66.160.70

  Contractor s/n description

  network of the External_TMC_Web object

  Home 84.39.233.53

  Description Public address to the TMC Web server

  network of the TMC_Webserver object

  Home 192.168.100.19

  Internal description address TMC Webserver

  network of the External_TMC_OLTP object

  Home 84.39.233.54

  External targets OLTP IP description

  network of the TMC_OLTP object

  Home 192.168.100.18

  description of the interal target IP address

  network of the External_OLTP_Failover object

  Home 84.39.233.55

  IP failover of the OLTP Public description

  network of the OLTP_Failover object

  Home 192.168.100.60

  Server failover OLTP description

  network of the servers object

  subnet 192.168.20.0 255.255.255.0

  being Wired network

  192.168.10.0 subnet 255.255.255.0

  the subject wireless network

  192.168.40.0 subnet 255.255.255.0

  network of the NETWORK_OBJ_192.168.100.0_24 object

  255.255.255.0 subnet 192.168.100.0

  network of the NETWORK_OBJ_192.168.10.0_24 object

  192.168.10.0 subnet 255.255.255.0

  network of the Eiresoft_2nd object

  Home 137.117.217.29

  Description 2nd Eiresoft IP

  network of the Dev_Test_Webserver object

  Home 192.168.100.12

  Description address internal to the Test Server Web Dev

  network of the External_Dev_Test_Webserver object

  Home 84.39.233.56

  Description This is the PB Dev Test Webserver

  network of the NETWORK_OBJ_192.168.1.0_24 object

  subnet 192.168.1.0 255.255.255.0

  object-group service DM_INLINE_SERVICE_1

  service-object MSQL

  service-object RDP

  object-group service DM_INLINE_SERVICE_2

  service-object MSQL

  service-object RDP

  object-group service DM_INLINE_SERVICE_3

  service-object MSQL

  service-object RDP

  object-group service DM_INLINE_SERVICE_4

  service-object MSQL

  service-object RDP

  the tcp destination eq ftp service object

  object-group service DM_INLINE_SERVICE_5

  service-object MSQL

  service-object RDP

  the tcp destination eq ftp service object

  object-group service DM_INLINE_SERVICE_6

  service-object MSQL

  service-object RDP

  the Payback_Intrernal object-group network

  object-network servers

  Wired network-object

  wireless network object

  object-group service DM_INLINE_SERVICE_7

  service-object MSQL

  service-object RDP

  object-group service DM_INLINE_SERVICE_8

  service-object MSQL

  service-object RDP

  object-group service DM_INLINE_SERVICE_9

  service-object MSQL

  service-object RDP

  object-group service DM_INLINE_SERVICE_10

  service-object MSQL

  service-object RDP

  the tcp destination eq ftp service object

  object-group service DM_INLINE_SERVICE_11

  service-object RDP

  the tcp destination eq ftp service object

  outside_access_in list extended access allow object-group DM_INLINE_SERVICE_1 object Payback_Office object CIX-host-1

  Note to access list OLTP Development Office of recovery outside_access_in

  outside_access_in list extended access allow DM_INLINE_SERVICE_2 object Payback_Office object Development_OLTP object-group

  Comment from outside_access_in-access Eiresoft access list

  outside_access_in list extended access allow DM_INLINE_SERVICE_3 object Eiresoft object Development_OLTP object-group

  outside_access_in list extended access allow DM_INLINE_SERVICE_4 object Payback_Office object TMC_Webserver object-group

  Note to outside_access_in access to OLTP for target recovery Office Access list

  outside_access_in list extended access allow DM_INLINE_SERVICE_5 object Payback_Office object TMC_OLTP object-group

  outside_access_in list extended access allow DM_INLINE_SERVICE_6 object Payback_Office object OLTP_Failover object-group

  Note to outside_access_in access-list that's allowing access of the Eiresoft on the failover OLTP server

  outside_access_in list extended access allow DM_INLINE_SERVICE_7 object Eiresoft object OLTP_Failover object-group

  Comment from outside_access_in-access list access for the 2nd period of INVESTIGATION of Eiresoft

  outside_access_in list extended access allow DM_INLINE_SERVICE_8 object Eiresoft_2nd object Development_OLTP object-group

  Note to outside_access_in access from the 2nd IP Eiresoft access list

  outside_access_in list extended access allow DM_INLINE_SERVICE_9 object Eiresoft_2nd object OLTP_Failover object-group

  outside_access_in list extended access allow DM_INLINE_SERVICE_10 object Payback_Office object Dev_Test_Webserver object-group

  outside_access_in list extended access allow DM_INLINE_SERVICE_11 object Payback_Office object External_TMC_OLTP object-group

  outside_cryptomap to access extended list ip 192.168.100.0 allow 255.255.255.0 192.168.10.0 255.255.255.0

  pager lines 24

  Enable logging

  asdm of logging of information

  Outside 1500 MTU

  Within 1500 MTU

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  no permit-nonconnected arp

  NAT (inside, outside) source Dynamics one interface

  NAT (inside, outside) static source CIX-host-1 External_CIX-host-1

  NAT (inside, outside) static source Development_OLTP External_Development_OLTP

  NAT (inside, outside) static source TMC_Webserver External_TMC_Web

  NAT (inside, outside) static source TMC_OLTP External_TMC_OLTP

  NAT (inside, outside) static source OLTP_Failover External_OLTP_Failover

  NAT (inside, outside) static source Dev_Test_Webserver External_Dev_Test_Webserver

  NAT (inside, outside) static source NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 non-proxy-arp-search of route static destination

  NAT (inside, outside) static source NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 84.39.233.49 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL

  the ssh LOCAL console AAA authentication

  Enable http server

  http 92.51.193.156 255.255.255.252 outside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac

  Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac

  Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac

  Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac

  Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac

  Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac

  Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac

  Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac

  Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac

  Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit

  Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac

  Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit

  Crypto ipsec ikev2 ipsec-proposal OF

  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec pmtu aging infinite - the security association
  card crypto outside_map 1 match address outside_cryptomap
  card crypto outside_map 1 set pfs
  peer set card crypto outside_map 1 92.51.193.158
  card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  outside_map card crypto 1jeu ikev2 AES AES192 AES256 3DES ipsec-proposal
  outside_map interface card crypto outside
  trustpool crypto ca policy
  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 10
  aes-192 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 20
  aes encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 30
  3des encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 40
  the Encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  Crypto ikev2 allow outside
  Crypto ikev1 allow outside
  IKEv1 crypto policy 10
  authentication crack
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 20
  authentication rsa - sig
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 30
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 40
  authentication crack
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 50
  authentication rsa - sig
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 60
  preshared authentication
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 70
  authentication crack
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 80
  authentication rsa - sig
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 90
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 100
  authentication crack
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 110
  authentication rsa - sig
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 120
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 130
  authentication crack
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 140
  authentication rsa - sig
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 150
  preshared authentication
  the Encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH 77.75.100.208 255.255.255.240 outside
  SSH 92.51.193.156 255.255.255.252 outside
  SSH timeout 5
  Console timeout 0

  dhcpd outside auto_config
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  internal GroupPolicy_92.51.193.158 group strategy
  attributes of Group Policy GroupPolicy_92.51.193.158
  VPN-tunnel-Protocol ikev1, ikev2
  username password 6e6Djaz3W/XH59zX gordon encrypted privilege 15
  tunnel-group 92.51.193.158 type ipsec-l2l
  tunnel-group 92.51.193.158 General-attributes
  Group - default policy - GroupPolicy_92.51.193.158
  IPSec-attributes tunnel-group 92.51.193.158
  IKEv1 pre-shared-key *.
  remote control-IKEv2 pre-shared-key authentication *.
  pre-shared-key authentication local IKEv2 *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:83b2069fa311e6037163ae74f9b2bec2
  : end

  Hello

  There are some clear problems I see on a quick glance. These are not related to the actual VPN configuration but rather the NAT configurations.

  All your configuration of NAT CLI format above are configured as manual NAT / double NAT in Section 1. This means that the appliance NAT configurations have been added to the same section of the NAT configurations and scheduling of the NAT inside this Section rules is the cause of the problem for the L2L VPN connection for some.

  Here are a few suggestions on what to change

  ASA1

  Minimal changes

  the object of the LAN network

  192.168.10.0 subnet 255.255.255.0

  being REMOTE-LAN network

  255.255.255.0 subnet 192.168.100.0

  NAT (inside, outside) 1 static source LAN LAN to static destination REMOTE - LAN LAN

  no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 non-proxy-arp-search of route static destination

  That means foregoing is first of all create 'object' that contain the local LAN and remote LANs. Then, it creates a NAT0 rule and adds to the top rules NAT. (number 1). It is essentially of at least one of the problems preventing the VPN operation or traffic that cross.

  Finally, we remove the old rule that generated the ASDM. It would do the same thing if it has been moved to the top, but I generally find the creation of the 'object' with descriptive names easier on the eyes in the long term.

  Other suggestions

  These changes are not necessary with regard to the VPN L2L. Here are some suggestions how to clean a part of NAT configurations.

  PAT-SOURCE network object-group

  source networks internal PAT Description

  object-network 192.168.10.0 255.255.255.0

  object-network 192.168.20.0 255.255.255.0

  object-network 192.168.40.0 255.255.255.0

  NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source

  No source (indoor, outdoor) nat Dynamics one interface

  no nat (wireless, outdoors) source Dynamics one interface

  no nat (servers, outside) no matter what source dynamic interface

  The above configuration creates a "object-group" that lists all internal networks that you have dynamic PAT configured so far. It then uses the ' object-group ' in a command unique 'nat' to manage the dynamic PAT for all internal networks (with the exception of printers who had nothing at first). Then we remove the old PAT dynamic configurations.

  Contains the command "nat" "car after" because it moving this "nat" configuration to the bottom of the NAT rules. For this reason its less likely to cause problems in the future.

  network of the SERVERS object

  subnet 192.168.20.0 255.255.255.0

  network of the VPN-POOL object

  192.168.50.0 subnet 255.255.255.0

  NAT (servers, external) 2 static static source of destination of SERVERS SERVERS VPN-VPN-POOL

  no nat (servers, external) static source NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.50.0_24 NETWORK_OBJ_192.168.50.0_24 non-proxy-arp-search of route static destination

  The above configuration is supposed to create a NAT0 configuration for traffic between the network and the pool of Client VPN server. To my knowledge the old configuration that remove us is not used because the traffic would have matched PAT rule dynamic server yet rather than this rule which is later in the NAT configurations and would not be addressed.

  no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

  It seems to me that network 192.168.1.0/24 is not configured from anywhere in your network. Therefore, the above 'nat' configuration seems useless, can be deleted. If I missed something and its use in then of course do not remove it.

  ASA2

  Minimal changes

  the object of the LAN network

  255.255.255.0 subnet 192.168.100.0

  being REMOTE-LAN network

  192.168.10.0 subnet 255.255.255.0

  NAT (inside, outside) 1 static source LAN LAN to static destination REMOTE - LAN LAN

  no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.10.0_24 NETWORK_OBJ_192.168.10.0_24 non-proxy-arp-search of route static destination

  That means foregoing is first of all create 'object' that contain the local LAN and remote LANs. Then, it creates a NAT0 rule and adds to the top rules NAT. (number 1). It is essentially of at least one of the problems preventing the VPN operation or traffic that cross.

  Finally, we remove the old rule that generated the ASDM.

  Other suggestions

  PAT-SOURCE network object-group

  object-network 192.168.100.0 255.255.255.0

  NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source

  No source (indoor, outdoor) nat Dynamics one interface

  The above configuration is supposed to do the same thing with the other ASA. Although given that this network contains only a single subnet it cleans the "nat" configurations exist that much. But the order of the "nat" configurations is changed to avoid further problems with the NAT order.

  no nat source (indoor, outdoor) public static NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 non-proxy-arp-search of route static destination

  It seems to me that network 192.168.1.0/24 is not configured from anywhere in your network. Therefore, the above 'nat' configuration seems useless, can be deleted. If I missed something and its use in then of course do not remove it.

  I suggest trying the changes related to VPN L2L first NAT0 configurations and test traffic. So who gets the work of connectivity, then you could consider changing other NAT configurations. There are other things that could be changed also in what concerns THAT static NAT servers but that probably better left for another time.

  Hope this makes any sense and has helped

  Remember to mark a reply as the answer if it answered your question.

  Feel free to ask more if necessary

  -Jouni

• ASA 5505 VPN Site to site with several networks

  Hello

  I have a Cisco ASA 5505 configuration problem and hope you can help me.

  Our company created a second facility, which must be connected using VPN to our headquarters.

  I used the ASDM "Wizard of Site to site VPN" to create a connection, which works very well with our main network.

  Following structure:

  Headquarters:

  Cisco ASA 5505, firmware 9.1, ASDM version 7.1

  Outside: Fixed IP

  Inside: IP address of the interface is 192.168.0.1/24 (data network)

  Now I have a second network 192.168.1.0/24 (VoIP network), PBX address is 192.168.1.10.

  The two networks should be accessible through the VPN.

  New installation:

  Cisco ASA 5505, firmware 9.1, ASDM version 7.1

  Outside: Fixed IP

  Inside: IP address of the interface is 192.168.2.1/24

  I have already created a connection until a PC of the new plant reaches the data network. For example, a ping from 192.168.2.100 to 192.168.0.100 is possible.

  Now, I want to add some VoIP phones to the new facility, which can reach the PBX on 192.168.1.10.

  In the link, I have already added the two networks as remote network:

  object-group network Testgroup network-object 192.168.0.0 255.255.255.0 network-object 192.168.1.0 255.255.255.0 access-list outside_cryptomap extended permit ip object-group Testgroup object Remote-Network 

  My problem now is, I don't know what to define as 'Bridge' on my PBX.

  I can't use 192.168.0.1 because it's a different subnet. Also, I can not put a second IP 192.168.1.1 to the interface of the ASA.

  You have any ideas, how can I accomplish this, so that the two subnets are accessed through the VPN and all devices have a defined gateway?

  Could a "Easy VPN Remote" in "Network Mode" you help me?

  What is the difference between 'Site-to-site' and 'extended network '?

  Kind regards

  Daniel condition, look for the solution GmbH

  You can optionally configure a new LAN VIRTUAL (VLAN PBX) on the SAA and connect this interface to the voice network.

  If you do not have a spare on the ASA port, then Yes, you have a router to route traffic from the PBX to the ASA via the data network.

• ASA 5505 VPN to IPSec website DOES NOT CONNECT

  I spent 2 days already to try to get 2 ASA 5505 to connect by using an IPSec vpn tunnel. I can't understand what im doing wrong, I'm using 192.168.97.0 and 192.168.100.0 as my internal networks that I am trying to connect via a link directly connected on the outside with 50.1.1.1 and 50.1.1.2 interfaces such as addresses (all 24). I also tried with and without active NAT. Here is for both of the ASA configs, the vpn config was conducted by the ASDM, but I also tried the approach of the command-line without success. I followed various guides to the letter online, starting with an empty config and factory default. I also tried the IOS 8.4.

  ASA 1 Config

  ASA 8.3 Version (2) ! VIC hostname activate 8Ry2YjIyt7RRXU24 encrypted password 2KFQnbNIdI.2KYOU encrypted passwd names of ! interface Vlan1 nameif inside security-level 100 IP 192.168.97.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 IP 50.1.1.1 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 Shutdown ! interface Ethernet0/3 Shutdown ! interface Ethernet0/4 Shutdown ! interface Ethernet0/5 Shutdown ! interface Ethernet0/6 Shutdown ! interface Ethernet0/7 Shutdown ! boot system Disk0: / asa832 - k8.bin passive FTP mode pager lines 24 Within 1500 MTU Outside 1500 MTU ICMP unreachable rate-limit 1 burst-size 1 don't allow no asdm history ARP timeout 14400 Timeout xlate 03:00 Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00 Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00 Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-registration DfltAccessPolicy Enable http server http 192.168.97.0 255.255.255.0 inside No snmp server location No snmp Server contact life crypto ipsec security association seconds 28800 Crypto ipsec kilobytes of life - safety 4608000 association Telnet timeout 5 SSH timeout 5 Console timeout 0 a basic threat threat detection Statistics-list of access threat detection no statistical threat detection tcp-interception WebVPN ! class-map inspection_default match default-inspection-traffic ! ! type of policy-card inspect dns preset_dns_map parameters maximum message length automatic of customer message-length maximum 512 Policy-map global_policy class inspection_default inspect the preset_dns_map dns inspect the ftp inspect h323 h225 inspect the h323 ras Review the ip options inspect the netbios inspect the rsh inspect the rtsp inspect the skinny inspect esmtp inspect sqlnet inspect sunrpc inspect the tftp inspect the sip inspect xdmcp ! global service-policy global_policy context of prompt hostname call-home Profile of CiscoTAC-1 no active account http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email address of destination [email protected] / * / destination-mode http transport Subscribe to alert-group diagnosis Subscribe to alert-group environment Subscribe to alert-group monthly periodic inventory monthly periodicals to subscribe to alert-group configuration daily periodic subscribe to alert-group telemetry Cryptochecksum:4745f7cd76c82340ba1e7920dbfd2395

  Config ASA2
  ASA 8.3 Version (2) ! hostname QLD

  activate 8Ry2YjIyt7RRXU24 encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.100.1 address 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP 50.1.1.2 255.255.255.0

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  Shutdown

  !

  interface Ethernet0/3

  Shutdown

  !

  interface Ethernet0/4

  Shutdown

  !

  interface Ethernet0/5

  Shutdown

  !

  interface Ethernet0/6

  Shutdown

  !

  interface Ethernet0/7

  Shutdown

  !

  passive FTP mode

  network of the SITEA object

  192.168.97.0 subnet 255.255.255.0

  network of the NETWORK_OBJ_192.168.100.0_24 object

  255.255.255.0 subnet 192.168.100.0

  outside_1_cryptomap to access extended list ip 192.168.100.0 allow 255.255.255.0 object SITEA

  pager lines 24

  Within 1500 MTU

  Outside 1500 MTU

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  NAT (inside, outside) static source NETWORK_OBJ_192.168.100.0_24 NETWORK_OBJ_192.168.100.0_24 static destination SITEA SITEA

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  Enable http server

  http 192.168.100.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  card crypto outside_map 1 match address outside_1_cryptomap

  card crypto outside_map 1 set pfs Group1

  peer set card crypto outside_map 1 50.1.1.1

  card crypto outside_map 1 set of transformation-ESP-3DES-SHA

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 65535

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  tunnel-group 50.1.1.1 type ipsec-l2l

  IPSec-attributes tunnel-group 50.1.1.1

  pre-shared key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  Review the ip options

  inspect the netbios

  inspect the rsh

  inspect the rtsp

  inspect the skinny

  inspect esmtp

  inspect sqlnet

  inspect sunrpc

  inspect the tftp

  inspect the sip

  inspect xdmcp

  !

  global service-policy global_policy

  context of prompt hostname

  call-home

  Profile of CiscoTAC-1

  no active account

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  Cryptochecksum:d987f3446fe780ab5fbb9d4213b3adff

  : end

  Hello Mitchell,

  Thanks for letting us know the resolution of this topic.

  Please answer the question as answered so future users can learn from this topic.

  Kind regards

  Julio

• 887VDSL2 IPSec site to site vpn does NOT use the easy vpn

  Much of community support.

  as I'm looking through the config Guide about 870 router series, only to find information about the config with eazy vpn.

  is there a classic way, about 870 Series site 2 site without eazy vpn IPSec configuration?

  Have a classic way if a tunnel? Have the 870 is not as a vpn client?

  Thank you

  Of course, here's example of Site to Site VPN configuration for your reference:

  http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a0080194650.shtml

  http://www.Cisco.com/en/us/products/HW/routers/ps221/products_configuration_example09186a008073e078.shtml

  Hope that helps.

• PIX and ASA static, dynamic and RA VPN does not

  Hello

  I am facing a very interesting problem between a PIX 515 and an ASA 5510.

  The PIX is in HQ and has several dynamic VPN connections (around 130) and IPsec vpn remote works very well. I had to add a PIX to ASA L2L VPN static and it does not work as it is supposed to be. The ASA 5510, at the remote end, connects and rest for a small period of time, however, all other VPN connections stop working.

  The most interesting thing is that ASA is associated with the dynamic map and not the static map that I created (check by sh crypto ipsec his counterpart x.x.x.x). However, if I make any changes in the ACL 'ACL-Remote' it affects the tunnel between the PIX and ASA.

  Someone saw something like that?

  Here is more detailed information:

  HQ - IOS 8.0 (3) - PIX 515

  ASA 5510 - IOS 7.2 (3) - remote provider

  Several Huawei and Cisco routers dynamically connected via ADSL

  Several users remote access IPsec

  A VPN site-to site static between PIX and ASA - does not.

  Here is the config on the PIX:

  Crypto ipsec transform-set ESP-3DES-ESP-SHA-HMAC-IPSec esp-3des esp-sha-hmac

  Dyn - VPN game 100 Dynamics-card crypto transform-set ESP-3DES-ESP-SHA-HMAC-IPSec

  Crypto dynamic-map Dyn - VPN 100 the value reverse-road

  VPN - card 30 crypto card matches the ACL address / remote

  card crypto VPN-card 30 peers set 20 x. XX. XX. XX

  card crypto VPN-card 30 the transform-set ESP-3DES-ESP-SHA-HMAC-IPSec value

  VPN crypto card - 100 - isakmp dynamic Dyn - VPN ipsec

  interface card crypto VPN-card outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  crypto ISAKMP policy 65535

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  access list ACL-remote ext ip 10.0.0.0 allow 255.255.255.0 192.168.1.0 255.255.255.0

  Thank you.

  Marcelo Pinheiro

  The problem is that the ASA has a crypto acl defined between host and network, while the remote end has to the network.

  Make sure that the acl is reversed.

• XLarge site, mayhem firewall, VPN is not working

  I propose that the Higher-Ed site I work through some of our contribute users to inContextEditing. Our server allows oncampus server access. Short of Adobe allowing me a VPN (unlikely), there a whole IP range inContextEditing adobe uses that I could give to my admins to the server as 'exceptions' to the firewall?

  A Department controls the server and I'm just a humble Designer on a few k of 3.5 pages. I sold my Department on inContextEditing to some users who don't contribute or dreamweaver. It would be a great way to help move to a CMS world all.

  I don't think I'll be the web admin only higher-ed with this question/request.

  -Jason

  Hello Jason,

  The InContext Editing service public static IP is 76.74.170.76.

  However, what you're trying is a method for using InContext Editing does not support. Others in the forum were not successful, trying to use InContext Editing with non-public sites, and I am unable to provide additional assistance.

  Best regards
  Corey