ASA 5510, 8.4 (4) totally confused 1 NAT

I'll try to keep this simple. I spent about 18 hours of research, research and experiences and it is an honest figure, I kept track of my time so far.
I need to run a home server on our network inside, but have the outside be able to reach it through the protocols and specific ports 3.
I had HOPED to use objects and groups of y to achieve and do not have to redefine this server or 3 times the host and execute instructions from NAT 3 or more like this losses completely the concept and purpose of things, isn't? But the NAT statement seems to refuse to deal with the GROUPS. I can put a single SERVICE or a single port in the NAT, but I can't get a single NAT line under a single object - this server to several ports which are not a range.

Here the need - I'll set every thing first to hold simple and straight (at least in my head):
Interface that must face or sits on the dirty Internet is named "WAN" (why I don't know, but it is and it is too complex to change it now)
The WAN, the external interface has an IP address of 1.1.1.66
Our supplier has given us 16 public guests or we can use the addresses.
(1.1.1.67 is on the ASA failover for the same interface).
My server inside LAN is 10.10.10.70
I need to use ANOTHER address I need to keep it out of 1.1.1.66 and 1.1.1.67 on the WAN 5510 interface pair.

I want to use a specific 1.1.1.68 to outside Internet address to access the server sitting on 10.10.10.70 inside.
BUT, I want access to UDP 500 and UDP 4500, ESP only, nothing else.

The idea is this - something outdoors, which means on the Internet, need my server inside, so hit the WAN interface this IP 1.1.1.68 port UDP 500 or 4500 or ESP for join my server on the LAN inside.
The ASA has noticed the UDP 500 traffic, 4500 and ESP to 1.1.1.68 and it translates the SAME ports on 10.10.10.70.
So I need a NAT device that will tell hit 1.1.1.68 UDP 500 or UDP 4500 or ESP traffic should be sent to 10.10.10.70 UDP 500, or UDP 4500 or ESP.

The server must meet the back course!
If very simple, he did all the time. "port forwarding" and a static NAT - this server always would be 1.1.1.68 If you were to research outside and he also always came out under this address. but inside we know it as 10.10.10.70

I can't seem to get the SENATE to take if I use a single service or define a single service, but when I create a service group that has ESP, UDP 4500 and UDP 500 in it, it does not recognize any group - he pours out if I say any word except the NAT statement SERVICE.

It is in a way I tried, but then 8.3 and later do not seem to like it and the term "origin" is killing me and I cannot find mention anywhere.

Object service VPN-4500
service destination udp 4500 eq
Object service VPN - 500
udp destination eq isakmp service

service object-group mygroup
purpose purpose of service VPN-4500
purpose purpose of service VPN-500

(I also now ESP in there but it is of no consequence that it won't work even with just these two)

network servernetworkobject object
Home 10.10.10.70
My server description
vpn-out network object
Home 1.1.1.68
Second description IP address to use when the view from my server

NAT (inside, WAN) source static servernetworkobject WANsecondIP service mygroup mygroup

where servernetworkobject is the name I've defined for the network object in the ASA and WANsecondIP is the address that I want to use defined as a network and mygroup object is the group, I created which contains the 3 services or ports.
These aren't real names or addresses is not really that lame in the configuration, I just cleaned it for public use

All of THE examples that I find on the web, including Cisco sites, are very similar to this, but then I also see, it must be defined with the object network itself and which is different from that of the samples on Cisco websites! I'm SO confused... Object should simplify this in spades, instead it is making it much more difficult and make configuration a lot bigger and clumsier.

The best way to do this is:

1. define the static nat rule

2. Add an access-list (or access list entry in the existing WAN_in (or what you call)) to allow the service group.

So you should have:

network servernetworkobject object
Home 10.10.10.70
My server description
vpn-out network object
Home 1.1.1.68
Second description IP address to use when the view from my server

NAT (inside, WAN) source static vpn-out servernetworkobject

.. .and

WAN_in list extended access allowed object-group mygroup any object servernetworkobject

Tags: Cisco Security

Similar Questions

ASA 5510 Anyconnect licenses with Cisco Anyconnect VPN IP phone

Hi, hoping someone can shed some light on what I'm just more confused over trying to get by. Not sure if this goes in the section IP Telehpony or here...

We have an ASA 5510 with the base license. We need to install IP phones to home teleworkers, and I understand there are Cisco IP phones that have built-in VPN clients to enable a tunnel to the central private network. IT seems that you can't use Anyconnect VPN to do this, and I am trying to establish what upgrade licenses, we must apply to the ASA, as both Anyconnect licenses that you get for free on the SAA is not enough.

This is the phone that we seek;

http://www.Cisco.com/en/us/prod/collateral/voicesw/ps6788/phones/ps10499/ps11005/data_sheet_c78-603725.html

I want to know is the Anyconnect Essentials license will work with these IP phones?

When I do a version of the show,

The devices allowed for this platform:

The maximum physical Interfaces: unlimited

VLAN maximum: 50

Internal hosts: unlimited

Failover: disabled

VPN - A: enabled

VPN-3DES-AES: enabled

Security contexts: 0

GTP/GPRS: disabled

SSL VPN peers: 2

The VPN peers total: 250

Sharing license: disabled

AnyConnect for Mobile: disabled

AnyConnect for Linksys phone: disabled

AnyConnect Essentials: disabled

Assessment of Advanced endpoint: disabled

Proxy sessions for the UC phone: 2

Total number of Sessions of Proxy UC: 2

Botnet traffic filter: disabled

This platform includes a basic license.

It shows "AnyConnect for Linksys phone: Disabled", it is the same for the Cisco IP phones? It is the kind of specific license, should I seek for Anyconnect on IP phones or will Essentials?

Hi Leo,

you will need 2 licenses: an Anyconnect Premium license and a permit «Anyconnect of Cisco VPN phone»

ASA 8.2 and earlier license "for Cisco VPN Phone" has been named "for phone Linksys' it's the same.

CFR. http://www.Cisco.com/en/us/docs/security/ASA/asa84/license/license_management/license.html#wp1487574

HTH

Herbert

Cisco ASA 5510 - IOS upgrade 7.0 failing. Not found Flash BIOS

Hello everyone

I have a Cisco ASA 5510 in a lab with none of the configurations environment what so ever.

Objective: upgrade the IOS current version 7.0 (8) to 7.1.1 (possibly go to 8.2 until memory upgrade on the SAA: 256 MB to 1 GB and then move to the latest version of 8.2 IOS).

Output to see the attached Version.

Output Flash attached show.

asa711 - k8.bin is the file that has been copied from a TFTP server to flash.

The following commands have been executed in order to update the IOS

ciscoasa (config) # boot flash system: / asa711 - k8.bin
INFO: Conversion of flash: / asa711 - k8.bin to disk0: / asa711 - k8.bin
ciscoasa (config) #.
ciscoasa (config) # end
ciscoasa # write memory
Cryptochecksum: aaaa08ce ccde38f2 19c42e08 dea24cbd
2713 bytes copied in 1,450 dry (2713 bytes/s)
[OK]
ciscoasa # reload

PROBLEM: the device ASA goes in an infinite loop (guard restart). This is the message on the console:

The system boot, please wait...

CISCO SYSTEMS
Embedded BIOS Version 1.0 (11) 15:11:51.82 5 08/28/08
Memory: 631ko
Memory: 256 MB
PCI device table.
Bus Dev Func VendID DevID class Irq
00 00 00 8086 2578 host Bridge
00 01 00 8086 2579 PCI to PCI bridge
00 03 00 8086 PCI bridge to PCI 257 b
00 1 00 8086 PCI bridge to PCI 25AE
1 d 00 00 8086 25A 9 Serial Bus 11
1 00 01 8086 25AA Bus series 10 d
1 d 00 04 8086 25AB system
1 d 00 05 8086 25AC IRQ controller
1 d 00 07 8086 25AD Bus series 9
1E 00 00 8086 PCI bridge to 244th PCI
1F 00 00 8086 25A 1 ISA Bridge
1F 00 02 8086 25 IDE controller has 3 11
1F 00 03 8086 25A 4 Bus series 5
1F 00 05 8086 25A 6 Audio 5
02 01 00 8086 1075 Ethernet 11
03 01 00 177 D 0003 encrypt/decrypt 9
03 02 00 8086 1079 Ethernet 9
03 02 01 8086 1079 Ethernet 9
03 03 00 8086 1079 Ethernet 9
03 03 01 8086 1079 Ethernet 9
04 02 00 8086 1209 Ethernet 11
04 03 00 8086 1209 Ethernet 5
Evaluate the BIOS Options...
Launch of the BIOS Extension installation ROMMON
Cisco Systems ROMMON Version (1.0 (11) 5) #0: Thu Aug 28 15:23:50 CDT 2008
Platform ASA5510
Use BREAK or ESC to interrupt the boot.
Use the SPACE to start boot immediately.
Start the program boot...
Startup configuration file contains 1 entry.

Load disk0: / asa711 - k8.bin... The starting...

256 MB OF RAM
Total of SSMs found: 0
Total cards network found: 7
mcwa i82557 Ethernet to irq 11 MAC: 0024.974a.65af
mcwa i82557 Ethernet to the irq 5 MAC: 0000.0001.0001
Not found BIOS flash.
Reset...

The only way for me to do things to normal is if I BREAK the sequence starting with ESC and go into ROMMON mode. I then issue a start command for the SAA to start with 7.0 (8) default IOS Image.

Please can someone explain what is the problem here?

Apologies if I'm missing something obvious that I'm not an expert of the SAA.

Looks like that the ASA is hitting a field notice: fn62378. The FN, it's because of the incompatible version of hardware and software. Please upgrade to version 7.1.2 instead of 7.1.1. If you plan to spend in 8.2. So instead of going 7.1.2 you could go to 7.2.5 (recommanded), then 8.2.5

http://www.Cisco.com/c/en/us/support/docs/field-notices/620/fn62378.html

It will be useful.

Kind regards

Akshay Rouanet

Remember messages useful rate.

VPN Cisco ASA 5510 - 250 licenses?

I can't find a clear answer on this. I see that only 2 SSL VPN clients are included, but if I buy an ASA 5510 (ASA5510-BUN-K9), am I allowed to use as a VPN endpoint for up to 250 customers? If so, is it a total of VPN 'site-to-site' and 'customer '?

For IPSec VPN (IPSec VPN site-to-site and remote client access), there is no additional license required as it is included in the device.

For SSL VPN, there is failure to license 2, and if you need more than 2 connections SSL VPN Client, then Yes, you must purchase an additional license (the AnyConnect Essentials or the AnyConnect license Premium depending on what you need).

ASA 5510 routing issue.

Forgive me if this get confused.

I have a new ASA 5510, I set it up to use VPN. I can via IPSEC vpn and connect to 2 of my et.64 sous-reseaux.0 (we have 4 subnets in our range) I can ping, http, connect to the shares, SSH, etc. I use the ACL of our outgoing VPN module, so I have nothing here should be bad. The problem I have is learning to our network of laboratories located on the sous-reseau.128. I can't ping, connect, http anything.

Is there some special routing I need to do so that people that VPN in to see this subnet? (For test purposes the ASA is located behind the firewall and connected directly to the sous-reseau.0 so I know this isn't the firewall and everything else on that subnet can see our lab).

Thanks for helping on the new guy.

Shawn

Shawn-

Your sous-reseaux.0 &.64 is considered to be "interesting traffic" (by an ACL) and they are not NAT had sent through the VPN tunnel. You must add the sous-reseau.128 two the ACL that says no NAT and that specifies traffic interesting. If you encounter some snags, post a sanitized config and we will be able to give a more detailed response.

HTH

Unable to connect to server vpn behind ASA 5510 with windows clients

Hi all

I've seen a number of posts on this and followed by a few documents of support on this issue, but I'm totally stuck now, nothing seems to work for me.

This is the usual scenario, I have a VPN windows 2003 Server sat on the lan deprived of our ASA 5510 firewall, and I try to get my Windows XP / 7 laptop computers to connect to it.

Within the ASDM:

(1) Server Public created for Protocol 1723

(2) Public created for the GRE protocol Server

3) created two public servers have the same public and private addresses

(4) the foregoing has created config Public Private static route in the section NAT firewall

(5) rules to Firewall 2 also created above on the external interface for both 1723 and GRE

When you try to connect, I get the following entry in the debug log.

6 August 6, 2010 17:09:37 302013 195.74.141.2 1045 1723 ChamberVPN-internal built ride connection TCP 1889195 for outside:195.74.141.2/1045 (195.74.141.2/1045) to the inside: ChamberVPN-internal/1723 (XXX.XXX.XXX.XXX/1723)

but nothing else.

The server shows not attempting a connection so I think I'm missing something on the firewall now.

Also inside interface there is a temporary rule:

Source: no

Destination: any

Service: IP

Action: enabled

This should allow all outbound traffic only as far as I know...

Any help would be greatly appreciated.

Chris

Hi Chris,

ASA newspaper indicates that the connection is interrupted because of "syn timeout. This means that asa receives no response from the Windows Server. Right now, we need to clarify some points.

1 - your vpn server committed a correct default gateway error or the path that lies in your fw interface asa.

is 2 - possible to start capturing packets on Windows Server. Hereby, we can get data flow information beetween client and server. And we can be sure that Windows Server wonders vpn.

Ufuk Güler

S2S VPN Asa 5510 to 5505 no traffic passing (hair Pulling)

I have one site to another configured between a 5505 and ASA 5510, the tunnel is in place but can not pass any traffic one way or another. A 5510, 8.4.3 while the 5505 was 8.2. I find the version 8.2 the less confusing when configure the VPN. The new NAT throws me for a loop on the 5510. I have 1 tunnel upward and will already and it works fine. But when I do a new online, it won't pass any traffic.

The traffic I'm EFS is 5510 (192.168.180.0/24, 172.25.11.0/24)<-------> 5505 (192.168.197.0/24) many thanks in advance!

Here's the configs for the two.

main site of 5510

ASA Version 8.4(3) ! hostname ASA5510 domain-name fphc.us enable password dmbm8Lq9pBST.0kk encrypted passwd dmbm8Lq9pBST.0kk encrypted names ! interface Ethernet0/0 nameif Outside security-level 0 ip address x.x.x.130 255.255.255.240 ! interface Ethernet0/1 nameif Inside security-level 100 ip address 192.168.180.253 255.255.254.0 ! interface Ethernet0/2 speed 100 duplex full shutdown no nameif no security-level no ip address ! interface Ethernet0/3 shutdown no nameif no security-level no ip address ! interface Management0/0 nameif management security-level 100 no ip address management-only ! boot system disk0:/asa843-k8.bin ftp mode passive clock timezone CST -6 clock summer-time CDT recurring dns domain-lookup Inside dns server-group DefaultDNS name-server 192.168.180.231 name-server 192.168.180.232 name-server 192.168.180.233 domain-name fphc.us same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj-192.168.180.0 subnet 192.168.180.0 255.255.254.0 object network obj-192.168.188.0 subnet 192.168.188.0 255.255.255.0 object network obj-216.86.7.128 subnet x.x.x.128 255.255.255.240 object network Mobile_Unit subnet 192.168.193.0 255.255.255.0 object network obj-172.27.0.0 subnet 172.27.0.0 255.255.255.0 object network obj_any subnet 0.0.0.0 0.0.0.0 object network obj-172.25.11.0 subnet 172.25.11.0 255.255.255.0 object network obj-172.35.0.0 subnet 172.35.0.0 255.255.254.0 object network SpamBox_1 host 192.168.180.244 object network SpamBox_2 host 192.168.180.248 object network Exchange host 192.168.180.235 object network PMG subnet 192.168.178.0 255.255.255.0 object network Outside_Gateway host x.x.x.129 object network AHCCN subnet 172.35.0.0 255.255.254.0 object network MM subnet 10.90.254.0 255.255.255.0 object network NETWORK_OBJ_172.27.0.0_25 subnet 172.27.0.0 255.255.255.128 object network NETWORK_OBJ_172.27.0.0_26 subnet 172.27.0.0 255.255.255.192 object network obj-172.35.1.199 host 172.35.1.199 object network obj-192.168.51.5 host 192.168.51.5 object service 6004 service udp destination eq 6004 object network AT_Remote subnet 192.168.197.0 255.255.255.0 object-group service DM_INLINE_SERVICE_2 service-object icmp echo service-object icmp echo-reply service-object tcp-udp destination eq domain service-object tcp-udp destination eq www object-group network DM_INLINE_NETWORK_1 network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_2 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_3 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_16 network-object object MM network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 network-object object obj-192.168.180.0 object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group icmp-type DM_INLINE_ICMP_1 icmp-object echo icmp-object source-quench object-group network DM_INLINE_NETWORK_5 network-object object AHCCN network-object object MM network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_6 network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 network-object object obj-192.168.180.0 object-group service DM_INLINE_SERVICE_4 service-object icmp service-object icmp echo service-object icmp echo-reply object-group service DM_INLINE_SERVICE_5 service-object tcp-udp destination eq domain service-object tcp destination eq smtp service-object tcp destination eq ssh service-object icmp echo service-object icmp echo-reply service-object udp destination eq ntp service-object udp destination eq time object-group service DM_INLINE_SERVICE_6 service-object tcp-udp destination eq domain service-object tcp destination eq smtp service-object tcp destination eq ssh service-object icmp echo service-object icmp echo-reply service-object udp destination eq ntp service-object udp destination eq time object-group service DM_INLINE_SERVICE_0 service-object icmp echo service-object icmp echo-reply service-object tcp destination eq www service-object tcp destination eq https service-object tcp destination eq smtp service-object tcp-udp destination eq domain service-object object 6004 object-group network DM_INLINE_NETWORK_7 network-object object MM network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 network-object object obj-172.35.0.0 object-group network DM_INLINE_NETWORK_8 network-object 172.25.11.0 255.255.255.0 network-object 172.35.0.0 255.255.254.0 object-group service DM_INLINE_SERVICE_7 service-object tcp-udp destination eq domain service-object object 6004 service-object icmp echo service-object icmp echo-reply service-object tcp destination eq www service-object tcp destination eq https service-object tcp destination eq smtp object-group network DM_INLINE_NETWORK_10 network-object 172.25.11.0 255.255.255.0 network-object 172.35.0.0 255.255.254.0 object-group network DM_INLINE_NETWORK_9 network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 object-group network DM_INLINE_NETWORK_11 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group service DM_INLINE_SERVICE_1 service-object tcp-udp destination eq domain service-object tcp destination eq smtp service-object udp destination eq ntp object-group network DM_INLINE_NETWORK_13 network-object object AHCCN network-object object obj-172.25.11.0 object-group network DM_INLINE_NETWORK_14 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_12 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group service DM_INLINE_SERVICE_3 service-object tcp-udp destination eq domain service-object tcp destination eq smtp service-object udp destination eq ntp object-group service DM_INLINE_SERVICE_8 service-object tcp-udp destination eq domain service-object tcp destination eq smtp service-object udp destination eq ntp object-group service Exchange-6001 udp port-object range 6001 6004 object-group network DM_INLINE_NETWORK_15 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group service DM_INLINE_SERVICE_10 service-object ip service-object icmp echo service-object icmp echo-reply object-group service DM_INLINE_SERVICE_9 service-object ip service-object icmp echo service-object icmp echo-reply service-object tcp-udp destination eq domain service-object tcp destination eq citrix-ica service-object tcp destination eq www service-object tcp destination eq https object-group network DM_INLINE_NETWORK_18 network-object object AHCCN network-object object obj-172.25.11.0 object-group network DM_INLINE_NETWORK_19 network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_20 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_17 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 access-list Inside_nat0_outbound extended permit ip object-group DM_INLINE_NETWORK_10 object PMG access-list Inside_nat0_outbound extended permit ip object-group DM_INLINE_NETWORK_1 192.168.188.0 255.255.255.0 access-list Inside_nat0_outbound extended permit ip object-group DM_INLINE_NETWORK_7 object obj-172.27.0.0 access-list Outside_1_cryptomap extended permit ip 192.168.188.0 255.255.255.0 object-group DM_INLINE_NETWORK_14 access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_9 object AT_Remote object-group DM_INLINE_NETWORK_15 access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_4 any any access-list Outside_access_in extended permit ip object Mobile_Unit object-group DM_INLINE_NETWORK_12 log debugging access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_7 object PMG object-group DM_INLINE_NETWORK_8 access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_0 any object Exchange access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_5 any object SpamBox_1 access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_6 any object SpamBox_2 access-list Outside_access_in extended permit ip 192.168.188.0 255.255.255.0 object-group DM_INLINE_NETWORK_2 access-list Outside_access_in extended deny ip 127.0.0.0 255.255.255.0 any log access-list Outside_access_in extended deny ip 10.0.0.0 255.255.255.0 any log access-list Outside_access_in extended deny ip 169.254.0.0 255.255.0.0 any log access-list Outside_access_in extended deny ip 224.0.0.0 255.0.0.0 any log access-list Outside_access_in extended deny ip 239.0.0.0 255.0.0.0 any log access-list Outside_access_in extended deny ip 173.0.0.0 255.0.0.0 any log debugging access-list Outside_access_in extended deny ip 224.0.0.0 255.255.255.31 any access-list Outside_access_in extended deny ip 192.168.0.0 255.255.0.0 any access-list Outside_access_in extended deny ip any any access-list global_mpc extended permit ip any any access-list global_access extended permit udp object obj-172.35.1.199 any eq snmp log disable access-list global_access extended permit ip object obj-172.27.0.0 any access-list splitTunnelAcl standard permit 192.168.180.0 255.255.254.0 access-list splitTunnelAcl standard permit 172.35.0.0 255.255.254.0 access-list splitTunnelAcl standard permit 172.25.11.0 255.255.255.0 access-list splitTunnelAcl standard permit 10.90.254.0 255.255.255.0 access-list Outside_cryptomap_1 extended permit ip object PMG object-group DM_INLINE_NETWORK_13 access-list Inside_access_in extended permit ip object obj_any any access-list Inside_access_in extended permit icmp any any object-group DM_INLINE_ICMP_1 log disable access-list Inside_access_in extended permit object-group DM_INLINE_SERVICE_8 object Exchange any log access-list Inside_access_in extended permit object-group DM_INLINE_SERVICE_1 object SpamBox_1 any log access-list Inside_access_in extended permit object-group DM_INLINE_SERVICE_3 object SpamBox_2 any log access-list Inside_access_in extended deny ip any any access-list Outside_cryptomap_2 extended permit ip object-group DM_INLINE_NETWORK_17 object AT_Remote access-list Outside_cryptomap extended permit ip object-group DM_INLINE_NETWORK_18 object PMG log access-list Outside_cryptomap_4 extended permit ip object-group DM_INLINE_NETWORK_3 object Mobile_Unit pager lines 24 logging enable logging timestamp logging emblem logging rate-limit unlimited level 1 logging rate-limit unlimited level 6 logging rate-limit unlimited level 7 mtu Outside 1500 mtu Inside 1500 mtu management 1500 ip local pool Client_Pool 172.27.0.50-172.27.0.100 mask 255.255.255.0 ip local pool RA_POOL 172.27.0.1-172.27.0.49 mask 255.255.255.0 ip verify reverse-path interface Outside ip verify reverse-path interface Inside no failover icmp unreachable rate-limit 1 burst-size 1 icmp permit any Outside icmp permit any Inside asdm history enable arp timeout 14400 nat (Inside,Outside) source static DM_INLINE_NETWORK_9 DM_INLINE_NETWORK_9 destination static PMG PMG no-proxy-arp route-lookup nat (Inside,Outside) source static DM_INLINE_NETWORK_20 DM_INLINE_NETWORK_20 destination static AT_Remote AT_Remote no-proxy-arp route-lookup nat (Inside,Outside) source static DM_INLINE_NETWORK_5 DM_INLINE_NETWORK_5 destination static NETWORK_OBJ_172.27.0.0_25 NETWORK_OBJ_172.27.0.0_25 no-proxy-arp route-lookup nat (Inside,Outside) source static DM_INLINE_NETWORK_16 DM_INLINE_NETWORK_16 destination static NETWORK_OBJ_172.27.0.0_26 NETWORK_OBJ_172.27.0.0_26 no-proxy-arp route-lookup nat (Inside,Outside) source static DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 destination static obj-192.168.188.0 obj-192.168.188.0 no-proxy-arp nat (Inside,Outside) source static DM_INLINE_NETWORK_19 DM_INLINE_NETWORK_19 destination static Mobile_Unit Mobile_Unit no-proxy-arp route-lookup nat (Inside,Outside) source static DM_INLINE_NETWORK_11 DM_INLINE_NETWORK_11 destination static AT_Remote AT_Remote no-proxy-arp route-lookup ! object network obj_any nat (Inside,Outside) dynamic interface object network SpamBox_1 nat (Inside,Outside) static x.x.x.132 object network SpamBox_2 nat (Inside,Outside) static x.x.x.133 object network Exchange nat (Inside,Outside) static x.x.x.131 dns access-group Outside_access_in in interface Outside access-group Inside_access_in in interface Inside access-group global_access global route Outside 0.0.0.0 0.0.0.0 x.x.x..129 1 route Inside 10.90.254.0 255.255.255.0 192.168.180.1 1 route Inside 172.16.200.0 255.255.255.0 192.168.180.200 1 route Inside 172.25.10.0 255.255.255.0 192.168.180.200 1 route Inside 172.25.11.0 255.255.255.0 192.168.180.200 1 route Inside 172.25.12.0 255.255.255.0 192.168.180.200 1 route Inside 172.27.0.0 255.255.255.0 192.168.180.200 1 route Inside 172.29.0.0 255.255.0.0 192.168.180.200 1 route Inside 172.35.0.0 255.255.254.0 192.168.180.200 1 route Inside 192.168.182.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.183.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.184.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.185.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.186.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.187.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.189.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.190.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.191.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.192.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.194.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.195.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.196.0 255.255.255.0 192.168.180.200 1 timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy aaa-server DC's protocol radius max-failed-attempts 5 aaa-server DC's (Inside) host 192.168.180.231 timeout 5 key ***** user-identity default-domain LOCAL http server enable http 192.168.180.0 255.255.255.0 Inside http 0.0.0.0 0.0.0.0 Inside http 172.27.0.0 255.255.255.0 Outside http 172.27.0.0 255.255.255.0 Inside snmp-server group Authentication&Encryption v3 priv snmp-server user trap Authentication&Encryption v3 encrypted auth md5 87:1d:3a:bd:50:49:7d:dc:45:89:a0:dc:c9:66:ed:78 priv 3des 87:1d:3a:bd:50:49:7d:dc:45:89:a0:dc:c9:66:ed:78:08:c6:ef:b2:7e:89:45:f2:6f:78:b5:01:33:47:68:c9 snmp-server host Inside 172.35.1.199 community ***** version 2c snmp-server host Inside 192.168.180.7 community ***** version 2c snmp-server location MLK snmp-server contact xxxxxxxx snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart snmp-server enable traps syslog snmp-server enable traps ipsec start stop snmp-server enable traps entity config-change fru-insert fru-remove snmp-server enable traps remote-access session-threshold-exceeded snmp-server enable traps cpu threshold rising snmp-server enable traps ikev2 start no sysopt connection reclassify-vpn sysopt connection preserve-vpn-flows crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto ipsec security-association lifetime seconds 43200 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map Outside_map 1 match address Outside_1_cryptomap crypto map Outside_map 1 set peer 173.10.204.46 crypto map Outside_map 1 set ikev1 phase1-mode aggressive crypto map Outside_map 1 set ikev1 transform-set ESP-3DES-SHA crypto map Outside_map 1 set ikev2 ipsec-proposal DES 3DES AES AES192 AES256 crypto map Outside_map 1 set ikev2 pre-shared-key ***** crypto map Outside_map 1 set security-association lifetime seconds 460800 crypto map Outside_map 4 match address Outside_cryptomap_1 crypto map Outside_map 4 set peer 207.190.237.254 crypto map Outside_map 4 set ikev1 phase1-mode aggressive group5 crypto map Outside_map 4 set ikev1 transform-set ESP-AES-128-SHA crypto map Outside_map 4 set ikev2 ipsec-proposal DES 3DES AES AES192 AES256 crypto map Outside_map 4 set security-association lifetime seconds 460800 crypto map Outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map 1 match address Outside_cryptomap_2 crypto map outside_map 1 set peer x.x.x.201 crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 2 match address Outside_cryptomap crypto map outside_map 2 set peer x.x.x.254 crypto map outside_map 2 set ikev1 phase1-mode aggressive group5 crypto map outside_map 2 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 2 set ikev2 ipsec-proposal DES 3DES AES AES192 AES256 crypto map outside_map 3 match address Outside_cryptomap_4 crypto map outside_map 3 set peer x.x.216.130 crypto map outside_map 3 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface Outside crypto ca trustpoint LOCAL-CA-SERVER keypair LOCAL-CA-SERVER crl configure crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=FPHC-ASA serial-number keypair LOCAL-CA-SERVER crl configure crypto ca server shutdown crypto ca certificate chain LOCAL-CA-SERVER certificate ca 01     308201ff 30820168 a0030201 02020101 300d0609 2a864886 f70d0101 05050030     13311130 0f060355 04031308 46504843 2d415341 301e170d 31323039 32303232     34393034 5a170d31 35303932 30323234 3930345a 30133111 300f0603 55040313     08465048 432d4153 4130819f 300d0609 2a864886 f70d0101 01050003 818d0030     81890281 8100e841 eeca425c 20c47a19 3b335924 30281111 cff571d7 0bb63dd8     5f3194f5 59d99cb1 60269694 aa13c591 505e0575 2de5ebb1 92d7c931 807f807b     6e84ee54 1da4ccaf 1f109f53 94c6e567 a8064e27 e27f3ea0 94f7bf32 2fe6064c     c2bbcd0d 7b0f8806 8614fcf9 80c6e4e1 83da75c5 080c7117 09e1d574 f17de8ac     1da4f2f9 f6e10203 010001a3 63306130 0f060355 1d130101 ff040530 030101ff     300e0603 551d0f01 01ff0404 03020186 301f0603 551d2304 18301680 144cb3da     6b6a5a14 c4b78674 49609b6b 8e58ea5f a3301d06 03551d0e 04160414 4cb3da6b     6a5a14c4 b7867449 609b6b8e 58ea5fa3 300d0609 2a864886 f70d0101 05050003     818100e0 7c9e15c3 13068614 788ff4d3 f282a4f4 fde72b00 3b05748f 0a4f68ec     6a7eb5fb 40c6d505 b1c35372 87102173 bb017e4b 2697c8f5 b66395f2 1418c77c     3e959343 84674b96 33558a08 629336c8 39c742bf 6b727b00 388a7102 8619cb5a     e4227aaf b58e267c 9e8b23d6 94cdc789 eb29cd96 1e579770 a2aa58ab 40694bb9 12888d   quit crypto ca certificate chain ASDM_TrustPoint0 certificate bd555b50     308201f7 30820160 a0030201 020204bd 555b5030 0d06092a 864886f7 0d010105     05003040 3111300f 06035504 03130846 5048432d 41534131 2b301206 03550405     130b4a4d 58313632 33583130 51301506 092a8648 86f70d01 09021608 46504843     2d415341 301e170d 31323039 32303232 35383434 5a170d32 32303931 38323235     3834345a 30403111 300f0603 55040313 08465048 432d4153 41312b30 12060355     0405130b 4a4d5831 36323358 31305130 1506092a 864886f7 0d010902 16084650     48432d41 53413081 9f300d06 092a8648 86f70d01 01010500 03818d00 30818902     818100e8 41eeca42 5c20c47a 193b3359 24302811 11cff571 d70bb63d d85f3194     f559d99c b1602696 94aa13c5 91505e05 752de5eb b192d7c9 31807f80 7b6e84ee     541da4cc af1f109f 5394c6e5 67a8064e 27e27f3e a094f7bf 322fe606 4cc2bbcd     0d7b0f88 068614fc f980c6e4 e183da75 c5080c71 1709e1d5 74f17de8 ac1da4f2     f9f6e102 03010001 300d0609 2a864886 f70d0101 05050003 8181008b c7a3e119     f1c6f60c 56ab7fd4 5096cfdf abb44331 fe3a0249 7f5fe79b 38a044c2 9a8b907d     12feba5d 6298a414 c4973369 040585b8 26b8b29e dfe7e226 0b10d08e 03658648     2fb0233e 27204339 c5a1c270 a0fec5b4 834340ac 9afefe75 4f802cb6 fb21b89c     9016e32c 2e772c00 191d23e0 036c4321 93a43b48 a6b682af 5dd5c0   quit crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 enable Outside crypto ikev1 enable Outside crypto ikev1 enable management crypto ikev1 policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 192.168.180.0 255.255.255.0 Inside telnet 172.27.0.0 255.255.255.0 Inside telnet timeout 10 ssh 192.168.180.0 255.255.255.0 Inside ssh 172.27.0.0 255.255.255.0 Inside ssh timeout 20 console timeout 0 management-access Inside vpn load-balancing interface lbpublic Outside interface lbprivate Inside threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp authenticate ntp server 50.77.217.185 source Outside prefer ntp server 216.171.120.36 source Outside webvpn group-policy "S2S-RA-Group Policy" internal group-policy "S2S-RA-Group Policy" attributes vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-client group-policy DfltGrpPolicy attributes vpn-filter value Inside_nat0_outbound vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless group-policy GroupPolicy_x.x.x.46 internal group-policy GroupPolicy_x.x.x.46 attributes vpn-filter value Outside_1_cryptomap vpn-tunnel-protocol ikev1 ikev2 group-policy GroupPolicy_x.x.x.254 internal group-policy GroupPolicy_x.x.x.254 attributes vpn-filter value Outside_cryptomap_1 vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec group-policy GroupPolicy_x.x.x.201 internal group-policy GroupPolicy_x.x.x.201 attributes vpn-filter value Outside_cryptomap_2 vpn-tunnel-protocol ikev1 group-policy GroupPolicy_x.x.216.130 internal group-policy GroupPolicy_x.x.216.130 attributes vpn-tunnel-protocol ikev1 group-policy VPN-GROUP2 internal group-policy VPN-GROUP2 attributes dns-server value 192.168.180.231 192.168.180.232 vpn-tunnel-protocol ikev1 split-tunnel-policy tunnelspecified split-tunnel-network-list value splitTunnelAcl default-domain value fphc.us group-policy VPN-GROUP internal group-policy VPN-GROUP attributes dns-server value 192.168.180.231 192.168.180.232 vpn-filter value splitTunnelAcl vpn-tunnel-protocol ikev1 l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value splitTunnelAcl default-domain value fphc.us username mark password YTp0IwzeNwb5kS8J encrypted privilege 15 tunnel-group DefaultRAGroup general-attributes default-group-policy VPN-GROUP tunnel-group x.x.x.46 type ipsec-l2l tunnel-group x.x.x.46 general-attributes default-group-policy GroupPolicy_x.x.x.46 tunnel-group x.x.x.46 ipsec-attributes ikev1 pre-shared-key ***** ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key ***** tunnel-group x.x.x.201 type ipsec-l2l tunnel-group x.x.x.201 general-attributes default-group-policy GroupPolicy_x.x.x.201 tunnel-group x.x.x.201 ipsec-attributes ikev1 pre-shared-key ***** tunnel-group VPN-GROUP type remote-access tunnel-group VPN-GROUP general-attributes address-pool Client_Pool authentication-server-group DC's default-group-policy VPN-GROUP tunnel-group VPN-GROUP ipsec-attributes ikev1 pre-shared-key ***** tunnel-group x.x.x.254 type ipsec-l2l tunnel-group x.x.x.254 general-attributes default-group-policy GroupPolicy_x.x.x.254 tunnel-group x.x.x.254 ipsec-attributes ikev1 pre-shared-key ***** ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key ***** tunnel-group VPN-GROUP2 type remote-access tunnel-group VPN-GROUP2 general-attributes address-pool RA_POOL authentication-server-group DC's default-group-policy VPN-GROUP2 tunnel-group VPN-GROUP2 ipsec-attributes ikev1 pre-shared-key ***** tunnel-group x.x.x.130 type ipsec-l2l tunnel-group x.x.x.130 general-attributes default-group-policy GroupPolicy_x.x.x.130 tunnel-group x.x.x.130 ipsec-attributes ikev1 pre-shared-key ***** tunnel-group PMG type ipsec-l2l tunnel-group PMG general-attributes default-group-policy GroupPolicy_x.x.x.254 tunnel-group PMG ipsec-attributes ikev1 pre-shared-key ***** ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key ***** tunnel-group-map default-group DefaultL2LGroup ! class-map global-class match access-list global_mpc class-map inspection_default match default-inspection-traffic class-map http_https description http_https match access-list Outside_access_in ! ! policy-map type inspect dns preset_dns_map parameters   message-length maximum client auto   message-length maximum 512 policy-map global_policy class inspection_default   inspect dns preset_dns_map   inspect ftp   inspect h323 h225   inspect h323 ras   inspect rsh   inspect rtsp   inspect sqlnet   inspect skinny    inspect sunrpc   inspect xdmcp   inspect sip    inspect netbios   inspect tftp   inspect ip-options class global-class   user-statistics accounting policy-map http_https class http_https   set connection timeout idle 1:15:00 reset   user-statistics accounting ! service-policy global_policy global service-policy http_https interface Outside smtp-server 192.168.180.235 prompt hostname context no call-home reporting anonymous Cryptochecksum:fcb4c2d9a982c11054c31ee4db778012 : end

5505 remote site

ASA Version 8.2(5) ! hostname AT-Remote domain-name fphc.us enable password 8Ry2YjIyt7RRXU24 encrypted passwd 2KFQnbNIdI.2KYOU encrypted names name 172.35.0.0 AHCCN name 172.25.11.0 AHCCN-1 name 192.168.180.0 FPHC ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 switchport trunk allowed vlan 1,30 switchport trunk native vlan 1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.197.250 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address x.x.x.201 255.255.255.252 ! ! boot system disk0:/asa825-k8.bin ftp mode passive dns domain-lookup inside dns domain-lookup outside dns server-group DefaultDNS name-server 68.87.68.162 name-server 68.87.74.162 domain-name fphc.us dns server-group DNS_Internal name-server 192.168.180.231 name-server 192.168.180.232 domain-name fphc.us same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group network obj_any object-group network 172.25.11.0 object-group network 172.35.0.0 object-group network 192.168.180.0 object-group network ASA-FW object-group network Comcast_Outside object-group network AT_Local object-group network NETWORK_OBJ_192.168.197.0_24 object-group icmp-type DM_INLINE_ICMP_1 icmp-object echo icmp-object echo-reply object-group service DM_INLINE_SERVICE_3 service-object ip service-object icmp echo service-object icmp echo-reply object-group service DM_INLINE_SERVICE_2 service-object ip service-object icmp object-group network obj_remote object-group network Franklin_Remote network-object AHCCN-1 255.255.255.0 network-object AHCCN 255.255.254.0 network-object FPHC 255.255.254.0 access-list outside_access_in extended permit ip object-group Franklin_Remote 192.168.197.0 255.255.255.0 access-list outside_access_in extended permit icmp any any object-group DM_INLINE_ICMP_1 log debugging access-list inside_access_in extended permit ip any any log access-list inside_access_in extended permit icmp any any echo log access-list outside_1_cryptomap extended permit ip 192.168.197.0 255.255.255.0 object-group Franklin_Remote access-list inside_nat0_outbound extended permit ip 192.168.197.0 255.255.255.0 object-group Franklin_Remote access-list inside_nat_outbound extended permit ip any interface outside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 no failover icmp unreachable rate-limit 1 burst-size 1 icmp permit any outside asdm image disk0:/asdm-645.bin no asdm history enable arp timeout 14400 global (outside) 101 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 101 access-list inside_nat_outbound access-group inside_access_in in interface inside access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 x.x.x.202 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 0.0.0.0 0.0.0.0 inside http 192.168.197.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart sysopt connection preserve-vpn-flows sysopt noproxyarp inside sysopt noproxyarp dmz crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 43200 crypto ipsec security-association lifetime kilobytes 4608000 crypto map outside_map 1 match address outside_1_cryptomap crypto map outside_map 1 set peer 216.86.7.130 crypto map outside_map 1 set transform-set ESP-3DES-SHA crypto map outside_map interface outside crypto ca trustpoint _SmartCallHome_ServerCA crl configure crypto ca certificate chain _SmartCallHome_ServerCA certificate ca 6ecc7aa5a7032009b8cebcf4e952d491     308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130     0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117     30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b     13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504     0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72     20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56     65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043     65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31     30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b     30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20     496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65     74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420     68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329     3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365     63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7     0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597     a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10     9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc     7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b     15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845     63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8     18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced     4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f     81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201     db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868     7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101     ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8     45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777     2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a     1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406     03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973     69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403     02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969     6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b     c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973     69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30     1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603     551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355     1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609     2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80     4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e     b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a     6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc     481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16     b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0     5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8     6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28     6c2527b9 deb78458 c61f381e a4c4cb66   quit crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption aes-256 hash sha group 2 lifetime 86400 crypto isakmp policy 20 authentication rsa-sig encryption aes-256 hash sha group 2 lifetime 86400 crypto isakmp policy 30 authentication pre-share encryption aes-256 hash sha group 2 lifetime 86400 crypto isakmp policy 40 authentication crack encryption aes-192 hash sha group 2 lifetime 86400 crypto isakmp policy 50 authentication rsa-sig encryption aes-192 hash sha group 2 lifetime 86400 crypto isakmp policy 60 authentication pre-share encryption aes-192 hash sha group 2 lifetime 86400 crypto isakmp policy 70 authentication crack encryption aes hash sha group 2 lifetime 86400 crypto isakmp policy 80 authentication rsa-sig encryption aes hash sha group 2 lifetime 86400 crypto isakmp policy 90 authentication pre-share encryption aes hash sha group 2 lifetime 86400 crypto isakmp policy 100 authentication crack encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 110 authentication rsa-sig encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 120 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 130 authentication crack encryption des hash sha group 2 lifetime 86400 crypto isakmp policy 140 authentication rsa-sig encryption des hash sha group 2 lifetime 86400 crypto isakmp policy 150 authentication pre-share encryption des hash sha group 2 lifetime 86400 telnet 0.0.0.0 0.0.0.0 inside telnet x.x.x.130 255.255.255.255 outside telnet timeout 5 ssh timeout 5 console timeout 0 management-access inside dhcpd address 192.168.197.25-192.168.197.100 inside dhcpd dns 192.168.180.232 68.87.74.162 interface inside dhcpd domain fphc.us interface inside dhcpd enable inside ! dhcprelay timeout 60 threat-detection basic-threat threat-detection statistics host threat-detection statistics protocol threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy DfltGrpPolicy attributes vpn-filter value outside_1_cryptomap group-policy GroupPolicy_216.86.7.130 internal group-policy GroupPolicy_216.86.7.130 attributes vpn-filter value inside_nat0_outbound vpn-tunnel-protocol IPSec l2tp-ipsec tunnel-group x.x.x.130 type ipsec-l2l tunnel-group x.x.x.130 general-attributes default-group-policy GroupPolicy_216.86.7.130 tunnel-group x.x.x.130 ipsec-attributes pre-shared-key ***** tunnel-group-map default-group DefaultL2LGroup ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters   message-length maximum 512 policy-map global_policy class inspection_default   inspect ftp   inspect h323 h225   inspect h323 ras   inspect rsh   inspect rtsp   inspect sqlnet   inspect skinny    inspect sunrpc   inspect xdmcp   inspect sip    inspect netbios   inspect tftp   inspect ip-options   inspect dns ! service-policy global_policy global prompt hostname context : end

Hello

The reason for the DECLINE suggests that the ASA has still attached to the L2L VPN VPN filter configuration that prevents traffic.

Check the configuration and remove atleast VPN filter temporarily for testing purposes.

-Jouni

Remote access VPN with ASA 5510 by using the DHCP server

Hello

Can someone please share your knowledge to help me find out why I'm not able to receive an IP address on the remote access VPN connection so that I can get an IP local pool DHCP?

I'm trying to set up remote access VPN with ASA 5510. It works with dhcp local pool but does not seem to work when I tried to use an existing DHCP server. It is tested in an internal network as follows:

!

ASA Version 8.2 (5)

!

interface Ethernet0/1

nameif inside

security-level 100

IP 10.6.0.12 255.255.254.0

!

IP local pool testpool 10.6.240.150 - 10.6.240.159 a mask of 255.255.248.0. (worked with it)

!

Route inside 0.0.0.0 0.0.0.0 10.6.0.1 1

!

Crypto ipsec transform-set esp-3des esp-md5-hmac FirstSet

life crypto ipsec security association seconds 28800

Crypto ipsec kilobytes of life - safety 4608000 association

Crypto-map dynamic dyn1 1jeu transform-set FirstSet

dynamic mymap 1 dyn1 ipsec-isakmp crypto map

mymap map crypto inside interface

crypto ISAKMP allow inside

crypto ISAKMP policy 1

preshared authentication

3des encryption

sha hash

Group 2

life 43200

!

VPN-addr-assign aaa

VPN-addr-assign dhcp

!

internal group testgroup strategy

testgroup group policy attributes

DHCP-network-scope 10.6.192.1

enable IPSec-udp

IPSec-udp-port 10000

!

username testlay password * encrypted

!

tunnel-group testgroup type remote access

tunnel-group testgroup General attributes

strategy-group-by default testgroup

DHCP-server 10.6.20.3

testgroup group tunnel ipsec-attributes

pre-shared key *.

!

I got following output when I test connect to the ASA with Cisco VPN client 5.0

Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: (4) SA (1) + KE + NUNCIO (10) + ID (5), HDR + VENDO

4024 bytesR copied in 3,41 0 seconds (1341 by(tes/sec) 13) of the SELLER (13) seller (13) + the SELLER (13), as well as the SELLER (13) ++ (0) NONE total length: 853

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, SA payload processing

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ke payload

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ISA_KE

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, nonce payload processing

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ID

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received xauth V6 VID

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, DPD received VID

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received Fragmentation VID

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, IKE Peer included IKE fragmentation capability flags: Main Mode: real aggressive Mode: false

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received NAT-Traversal worm 02 VID

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, the customer has received Cisco Unity VID

Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, connection landed on tunnel_group testgroup

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA payload processing

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA proposal # 1, turn # 9 entry overall IKE acceptable matches # 1

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build the payloads of ISAKMP security

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building ke payload

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building nonce payload

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Generating keys for answering machine...

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of payload ID

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of Cisco Unity VID

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing payload V6 VID xauth

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building dpd vid payload

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing the payload of the NAT-Traversal VID ver 02

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of Fragmentation VID + load useful functionality

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads VID

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, send Altiga/Cisco VPN3000/Cisco ASA GW VID

Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR SA (1) KE (4) NUNCIO (10) + ID (5) + HASH (8) + SELLER (13) + the SELLER (13) + the SELLER (13) + the SELLER (13) NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) total length: 440

Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: HDR + HASH (8) + NOTIFY (11) + NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) overall length: 168

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing hash payload

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing notify payload

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, useful treatment IOS/PIX Vendor ID (version: 1.0.0 capabilities: 00000408)

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, the customer has received Cisco Unity VID

Jan 16 15:39:21 [IKEv1]: Group = testgroup, I

[OK]

KenS-mgmt-012 # P = 10.15.200.108, status of automatic NAT detection: remote end is NOT behind a NAT device this end is NOT behind a NAT device

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, empty building hash payload

Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash qm

Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 72

Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 87

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, process_attr(): enter!

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, transformation MODE_CFG response attributes.

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary DNS = authorized

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary DNS = authorized

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized primary WINS

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized secondary WINS

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Compression IP = disabled

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Split Tunneling political = disabled

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: setting Proxy browser = no - modify

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: browser Local Proxy bypass = disable

Jan 16 15:39:26 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, (testlay) the authenticated user.

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm

Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 64

Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + NONE (0) overall length: 60

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!

Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cfg ACK processing attributes

Jan 16 15:39:27 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 49ae1bb8) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 182

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, treatment cfg request attributes

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 address!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 network mask!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for DNS server address.

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the address of the WINS server.

Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, transaction mode attribute unhandled received: 5

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the banner!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting save PW!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: receipt of request for default domain name!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for Split-Tunnel list!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for split DNS!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for PFS setting!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Proxy Client browser setting!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the list of backup peer ip - sec!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting disconnect from the Client Smartcard Removal!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Version of the Application.

Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Type of Client: Windows NT Client Application Version: 5.0.07.0440

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for FWTYPE!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: request received for the DHCP for DDNS hostname is: DEC20128!

Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the UDP Port!

Jan 16 15:39:32 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets. No last packet retransmit.

Jan 16 15:39:37 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = b04e830f) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84

Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing hash payload

Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing notify payload

Jan 16 15:39:37 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets. No last packet retransmit.

Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE has received the response from type [] at the request of the utility of IP address

Jan 16 15:39:39 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cannot get an IP address for the remote peer

Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE TM V6 WSF (struct & 0xd8030048) , : TM_DONE, EV_ERROR--> TM_BLD_REPLY, EV_IP_FAIL--> TM_BLD_REPLY NullEvent--> TM_BLD_REPLY, EV_GET_IP--> TM_BLD_REPLY, EV_NEED_IP--> TM_WAIT_REQ, EV_PROC_MSG--> TM_WAIT_REQ, EV_HASH_OK--> TM_WAIT_REQ, NullEvent

Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE AM Responder WSF (struct & 0xd82b6740) , : AM_DONE, EV_ERROR--> AM_TM_INIT_MODECFG_V6H, EV_TM_FAIL--> AM_TM_INIT_MODECFG_V6H NullEvent--> AM_TM_INIT_MODECFG, EV_WAIT--> AM_TM_INIT_XAUTH_V6H, EV_CHECK_QM_MSG--> AM_TM_INIT_XAUTH_V6H, EV_TM_XAUTH_OK--> AM_TM_INIT_XAUTH_V6H NullEvent--> AM_TM_INIT_XAUTH_V6H, EV_ACTIVATE_NEW_SA

Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE SA AM:bd3a9a4b ending: 0x0945c001, refcnt flags 0, tuncnt 0

Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, sending clear/delete with the message of reason

Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload

Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing the payload to delete IKE

Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm

Jan 16 15:39:39 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 9de30522) with payloads: HDR HASH (8) + DELETE (12) + (0) NONE total length: 80

Kind regards

Lay

For the RADIUS, you need a definition of server-aaa:

Protocol AAA - NPS RADIUS server RADIUS

AAA-server RADIUS NPS (inside) host 10.10.18.12

key *.

authentication port 1812

accounting-port 1813

and tell your tunnel-group for this server:

General-attributes of VPN Tunnel-group

Group-NPS LOCAL RADIUS authentication server

--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni

AnyConnect VPN license on ASA 5510

Hello

We have ASA 5510 IPS with basic license. We must now Anyconnect support for more than 2 users.

Anyconnect (tunnel mode) but essentially Anyconnect license enough? Do need me a license for SSL VPN peers?

What about Anyconnect without customer, I see that I need a premium license?

This one is pretty ASA5510-SSL50-K9? It's really expensive compared the Anyconnect Essentials.

Here is my worm out sh:

The devices allowed for this platform:
The maximum physical Interfaces: unlimited
VLAN maximum: 50
Internal hosts: unlimited
Failover: disabled
VPN - A: enabled
VPN-3DES-AES: enabled
Security contexts: 0
GTP/GPRS: disabled
SSL VPN peers: 2
The VPN peers total: 250
Sharing license: disabled
AnyConnect for Mobile: disabled
AnyConnect Cisco VPN phone: disabled
AnyConnect Essentials: disabled
Assessment of Advanced endpoint: disabled
Proxy sessions for the UC phone: 2
Total number of Sessions of Proxy UC: 2
Botnet traffic filter: disabled

This platform includes a basic license.

Yes, AnyConnect Premium includes all the SSL features (including the complete tunnel mode AnyConnect - which is what sustains essential AnyConnect).

So if you buy the 50 user for AnyConnect Premium license, you can have up to 50 SSL VPN connections, if they are the combination of all without customer, or combination of tunnel without customer and full, or just full tunnel. All with a maximum of 50 simultaneous SSL tunnels.

Need a replacement for my Officejet 5610 - totally confused cartridges!

Need to buy replacement cartridges and I'm totally confused by the wide range that I have to choose. Specifically, need help with...

(1) understand what are "compatible" cheaper options tried a couple of them and my printer HP 5610 does not accept them at all. Need to know what is the difference between 'remanufactured' and 'original '. Original is obvious but do not understand the term "rebuilt". It is better to buy refurbished - they seem to be much cheaper.

(2) my printer color cartridge was hardly used at all & the printer was happily ignoring that cartridge because I print "Black" only. But recently I started getting an error message... "No plans left for your printer cartridge". Noticed the date on this cartridge is 06/06/2008. Is this relevant; guess no cause that I used printer at least once a week from then until January 2014.

(3) I seem to have a purchase choice HP27, HP56 HP57 to replace the black cartridge. What is the difference between these 3?

(4) I seem to have only one choice for the color cartridge and HP22 (C9352A). Is this fair?

Kean19 wrote:

Need to buy replacement cartridges and I'm totally confused by the wide range that I have to choose. Specifically, need help with...

(1) understand what are "compatible" cheaper options tried a couple of them and my printer HP 5610 does not accept them at all. Need to know what is the difference between 'remanufactured' and 'original '. Original is obvious but do not understand the term "rebuilt". It is better to buy refurbished - they seem to be much cheaper.

(2) my printer color cartridge was hardly used at all & the printer was happily ignoring that cartridge because I print "Black" only. But recently I started getting an error message... "No plans left for your printer cartridge". Noticed the date on this cartridge is 06/06/2008. Is this relevant; guess no cause that I used printer at least once a week from then until January 2014.

(3) I seem to have a purchase choice HP27, HP56 HP57 to replace the black cartridge. What is the difference between these 3?

(4) I seem to have only one choice for the color cartridge and HP22 (C9352A). Is this fair?
1. The "compatible" cartridges are generally filled / cartridges that have been used one or several times, then filled and reconditioned discounts. The quality is very variable, but is generally low, see the study here for more information.
2. The printer can print with happiness with an empty cartridge, but if the cartridge is not electrically, it will be rejected for not damage the electronics of the printer. The cartridges do not expire, but a cartridge that old may have failed. The date printed on the cartridge is the date of end of warranty, two years from the date of manufacture. Your color cartridge is almost eight years at this point.
3. The 57 cartridge is a cartridge not black color. It is not usable in the black slot. The 56 cartrdige is probably your best bet for the black cartridge, it is $ 26 on the HP site and rating of 630 pages. The 27 cartridge is $ 22 and rated at 340 pages. 56 cartridge holds nearly twice the ink use cartridge 27, 19.5 ml to 56 compared to 11 ml to 27.
4. Yes, the cartridge 22 is the only color cartridge in Officejet 5610 according to the website of HP SureSupplysupported.

IPS in ASA 5510 killing upload speed

I've recently updated by a circuit of ethernet metro 20 MB for a 100 Mb connection. My ASA 5510 severely limits the my download speed. I narrowed down it to the IPS module. If I stop to send traffic to the IPS, I get speeds of download between 50-85 Mbps. If I start sending through again, my download speeds are between 3-7 Mbps. In both cases, my speeds range between 70-92 MB/s, so it's really affecting only my upload speed. Is there anything I can do for my traffic IPS, so I can still use my modules and still take advantage of the speed upload huge we pay for?

Here is some info from my ASA:

I am matching all traffic:

allow traffic_for_ips to access extensive ip list a whole

Here is my policy and class parameters:

class-map inspection_default
match default-inspection-traffic
class-map-botnet-DNS
match eq field udp port
class-map ips_class_map
corresponds to the traffic_for_ips access list
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the ftp
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the preset_dns_map dns
class ips_class_map
IPS inline help
botnet-policy policy-map
botnet-DNS class
inspect the snoop-filter-dynamic dns
!
global service-policy global_policy
service-policy botnet-policy to the outside interface

If anyone has any ideas, I'd love to hear them. Thank you.

Created: May 13, 2011 18:49 created by: Chevrel, customer Aastha(AACHAUDH,265429) was experiencing slow download speeds (3-7 Mbps) on in ASA 5510 IPS module. Download the range of speeds between 70-92 MB/s

Used the workaround for the bug No. CSCsv69844 , i.e. to set the depth of Regex to 800000 (Please note that this workaround should not serve with the recommendation and approval of the ATC.)

Updated AIP-SSM-10 on ASA 5510

Hello

I want to upgrade the IPS module in an ASA 5510, and I have a few questions. The AIP - SSM is running E3 479.0 1.0000 and I have a valid account of the ORC etc for this.
1. What is the version of the software on the question of the ASA?
2. When I look in the software downloads< ips="" there="" are="" .pkg="" and="" .img="" files.="" i="" want="" to="" upgrade="" to="" 6.3(3)e4.="" do="" i="" have="" to="" re-image="" the="" ips="">
3. AFAIK redefinition to wipe the device so I just reload the config after, right?
4. I guess I can apply any update after going to E4?
5. Can you give me links for this upgrade?
see you soon

Let me give some clarification on a few points:

2. There is no need to recreate the image on the device using the .img file. You can improve the mechanism of maintenance of your existing configuration using the .pkg file. It is the recommended method for upgrading to Cisco IPS devices/modules. The .img file to recreate the image should only be used to restore the default device.

5 here are links for the upgrade of the probe using a .pkg file. For updates through the IDM user interface:

http://www.Cisco.com/en/us/docs/security/IPS/6.2/configuration/guide/IDM/idm_sensor_management.html#wp2126670

For upgrades via the CLI:

http://www.Cisco.com/en/us/docs/security/IPS/6.2/configuration/guide/CLI/cli_system_images.html#wp1142504

Another point of clarification; current releases of IPS software supported on the AIP-SSM-10 are (taking into account you are currently running 6.2 (1) E3):

6.2 (3) E4

7.0 (4) E4

You can go directly to each output.

Scott

Review of the ASA 5510 Config

Hi all, I'm about to replace an existing a new ASA 5510 firewall. The environment is pretty simple, just an external and internal interface. I put in correspondence configs as much as possible, but I'd like to see if there are obvious problems. I am concerned mainly with my NAT statements. Nothing in the following config (sterilized) seems out of place? Thank you!!

------------------------------------------------------------

ASA 4,0000 Version 5

!

ciscoasa hostname

enable the encrypted password xxxxxxxxxx

XXXXXXXXXX encrypted passwd

names of

!

interface Ethernet0/0

nameif outside

security-level 0

IP 40.100.2.2 255.255.255.252

!

interface Ethernet0/1

nameif inside

security-level 100

IP 10.30.0.100 255.255.255.0

!

interface Ethernet0/2

Shutdown

No nameif

no level of security

no ip address

!

interface Ethernet0/3

Shutdown

No nameif

no level of security

no ip address

!

interface Management0/0

Shutdown

nameif management

security-level 100

IP 192.168.1.1 255.255.255.0

management only

!

boot system Disk0: / asa844-5 - k8.bin

passive FTP mode

permit same-security-traffic inter-interface

network of the 10.10.0.78 object

Home 10.10.0.78

Nospam description

network of the 10.10.0.39 object

Home 10.10.0.39

Description exch

network of the 55.100.20.109 object

Home 55.100.20.109

Description mail.oursite.com

network of the 10.10.0.156 object

Home 10.10.0.156

Description

www.oursite.com-Internal

network of the 55.100.20.101 object

Home 55.100.20.101

Description

www.oursite.com-External

network of the 10.10.0.155 object

Home 10.10.0.155

Ftp description

network of the 10.10.0.190 object

Home 10.10.0.190

farm www Description

network of the 10.10.0.191 object

Home 10.10.0.191

farm svc Description

network of the 10.10.0.28 object

Home 10.10.0.28

Vpn description

network of the 10.10.0.57 object

Home 10.10.0.57

Description cust.oursite.com

network of the 10.10.0.66 object

Home 10.10.0.66

Description spoint.oursite.com

network of the 55.100.20.102 object

Home 55.100.20.102

Description cust.oursite.com

network of the 55.100.20.103 object

Home 55.100.20.103

Ftp description

network of the 55.100.20.104 object

Home 55.100.20.104

Vpn description

network of the 55.100.20.105 object

Home 55.100.20.105

app www description

network of the 55.100.20.106 object

Home 55.100.20.106

app svc description

network of the 55.100.20.107 object

Home 55.100.20.107

Description spoint.oursite.com

network of the 55.100.20.108 object

Home 55.100.20.108

Description exchange.oursite.com

ICMP-type of object-group DM_INLINE_ICMP_1

response to echo ICMP-object

ICMP-object has exceeded the time

ICMP-unreachable object

Exchange_Inbound tcp service object-group

EQ port 587 object

port-object eq 993

port-object eq www

EQ object of the https port

port-object eq imap4

DM_INLINE_TCP_1 tcp service object-group

port-object eq www

EQ object of the https port

object-group service DM_INLINE_SERVICE_1

will the service object

the purpose of the tcp destination eq pptp service

the DM_INLINE_NETWORK_1 object-group network

network-object, object 10.10.0.190

network-object, object 10.10.0.191

the DM_INLINE_NETWORK_2 object-group network

network-object, object 10.10.0.156

network-object, object 10.10.0.57

DM_INLINE_TCP_2 tcp service object-group

port-object eq www

EQ object of the https port

object-group service sharepoint tcp

port-object eq 9255

port-object eq www

EQ object of the https port

outside_access_in list extended access permit icmp any any DM_INLINE_ICMP_1 object-group

outside_access_in list extended access permit tcp any object 10.10.0.78 eq smtp

outside_access_in list extended access permit tcp any object object 10.10.0.39 - Exchange_Inbound group

outside_access_in list extended access permit tcp any object-group DM_INLINE_NETWORK_2-group of objects DM_INLINE_TCP_1

outside_access_in list extended access permit tcp any object 10.10.0.155 eq ftp

outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_1 any object 10.10.0.28

outside_access_in list extended access permit tcp any object-group DM_INLINE_NETWORK_1-group of objects DM_INLINE_TCP_2

outside_access_in list extended access permit tcp any object 10.10.0.66 object-group Sharepoint

pager lines 24

Enable logging

asdm of logging of information

Outside 1500 MTU

Within 1500 MTU

management of MTU 1500

ICMP unreachable rate-limit 1 burst-size 1

ASDM image disk0: / asdm-649 - 103.bin

don't allow no asdm history

ARP timeout 14400

no permit-nonconnected arp

NAT (exterior, Interior) static source everything any static destination 55.100.20.109 10.10.0.78

NAT (exterior, Interior) static source everything any static destination 55.100.20.108 one-way 10.10.0.39

NAT (inside, outside) static source 10.10.0.39 one-way 55.100.20.109

NAT (exterior, Interior) static source everything any static destination 55.100.20.101 10.10.0.156

NAT (exterior, Interior) static source everything any static destination 55.100.20.102 10.10.0.57

NAT (exterior, Interior) static source everything any static destination 55.100.20.103 10.10.0.155

NAT (exterior, Interior) static source everything any static destination 55.100.20.104 10.10.0.28

NAT (exterior, Interior) static source everything any static destination 55.100.20.105 10.10.0.190

NAT (exterior, Interior) static source everything any static destination 55.100.20.106 10.10.0.191

NAT (exterior, Interior) static source everything any static destination 55.100.20.107 10.10.0.66

Access-group outside_access_in in interface outside

Route outside 0.0.0.0 0.0.0.0 40.100.2.1 1

Route inside 10.10.0.0 255.255.255.0 10.30.0.1 1

Timeout xlate 03:00

Pat-xlate timeout 0:00:30

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

identity of the user by default-domain LOCAL

Enable http server

http 192.168.1.0 255.255.255.0 management

http 10.10.0.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Telnet timeout 5

SSH 10.10.0.0 255.255.255.0 inside

SSH timeout 5

SSH group dh-Group1-sha1 key exchange

Console timeout 0

!

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

source of NTP server outside xxxxxxxxxx

WebVPN

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

maximum message length automatic of customer

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

Review the ip options

inspect the pptp

!

global service-policy global_policy

context of prompt hostname

no remote anonymous reporting call

Cryptochecksum:40cee3a773d380834b10195ffc63a02f

: end

Hello

You do nat (exterior, Interior), I'm going to do inside, outside but the configuration is always good.

The ACL configuration is fine, Nat is fine, so you should have problems,

Kind regards

Julio

Cisco ASA 5510 + license + AIP - SSM

Hello.

I have this box.

I have a few questions about it.

(1) I'll be able to update the firmware (from 8.2 to 8.3 or greater for example) without smarnet for ASA 5510? And what can not do without smartnet?

(2) I have only AIP-SSM-10 module this ASA 5510. is there a smartnet, too? And when I buy only one module is it build in a subscription for 1 year for the signatures of the IPS?

(3) if I have the Cisco ASA 5510 base license, my IPS on AIP-SSM-10 will work?

(4) as I foresee in a purchase of the year a 5510 more with the same module and mount ther of failover. I really need license Security more than failover (active / standby)? For active/active, I know I need one, Yes?

Please help me.

(1) you must Smartnet in order to download the software from the download from cisco.com site.

(2) Yes, there is also a smartnet for the AIP module. Module AIP does not come with one year subscription, but you can ask for a demo license.

(3) Yes, the basic license is OK for the AIP module.

(4) Yes, you would need license security more on the two ASA to be able to run any type of failover on ASA5510.

Hope that answers your questions.

ASA 5510 - display block URL Page

Dear,

I have Cisco ASA 5510, I have already configured Block_Sites using regular expressions and it works fine. I need to display a Page blocked for any one trying to access blocked sites. Example: I need to display page contains our company Logo and less it shows that "the Site is blocked.

I can do it on Cisco ASA 5510?

Thank you

No, the ASA alone cannot do. To do this, you need a will end UP with appropriate license or a proxy (such as the WSA).

ASA 5510, 8.4 (4) totally confused 1 NAT

Similar Questions

Maybe you are looking for