S2S VPN Asa 5510 to 5505 no traffic passing (hair Pulling)

I have one site to another configured between a 5505 and ASA 5510, the tunnel is in place but can not pass any traffic one way or another. A 5510, 8.4.3 while the 5505 was 8.2. I find the version 8.2 the less confusing when configure the VPN. The new NAT throws me for a loop on the 5510. I have 1 tunnel upward and will already and it works fine. But when I do a new online, it won't pass any traffic.

The traffic I'm EFS is 5510 (192.168.180.0/24, 172.25.11.0/24)<-------> 5505 (192.168.197.0/24) many thanks in advance!

Here's the configs for the two.

main site of 5510

ASA Version 8.4(3) ! hostname ASA5510 domain-name fphc.us enable password dmbm8Lq9pBST.0kk encrypted passwd dmbm8Lq9pBST.0kk encrypted names ! interface Ethernet0/0 nameif Outside security-level 0 ip address x.x.x.130 255.255.255.240 ! interface Ethernet0/1 nameif Inside security-level 100 ip address 192.168.180.253 255.255.254.0 ! interface Ethernet0/2 speed 100 duplex full shutdown no nameif no security-level no ip address ! interface Ethernet0/3 shutdown no nameif no security-level no ip address ! interface Management0/0 nameif management security-level 100 no ip address management-only ! boot system disk0:/asa843-k8.bin ftp mode passive clock timezone CST -6 clock summer-time CDT recurring dns domain-lookup Inside dns server-group DefaultDNS name-server 192.168.180.231 name-server 192.168.180.232 name-server 192.168.180.233 domain-name fphc.us same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj-192.168.180.0 subnet 192.168.180.0 255.255.254.0 object network obj-192.168.188.0 subnet 192.168.188.0 255.255.255.0 object network obj-216.86.7.128 subnet x.x.x.128 255.255.255.240 object network Mobile_Unit subnet 192.168.193.0 255.255.255.0 object network obj-172.27.0.0 subnet 172.27.0.0 255.255.255.0 object network obj_any subnet 0.0.0.0 0.0.0.0 object network obj-172.25.11.0 subnet 172.25.11.0 255.255.255.0 object network obj-172.35.0.0 subnet 172.35.0.0 255.255.254.0 object network SpamBox_1 host 192.168.180.244 object network SpamBox_2 host 192.168.180.248 object network Exchange host 192.168.180.235 object network PMG subnet 192.168.178.0 255.255.255.0 object network Outside_Gateway host x.x.x.129 object network AHCCN subnet 172.35.0.0 255.255.254.0 object network MM subnet 10.90.254.0 255.255.255.0 object network NETWORK_OBJ_172.27.0.0_25 subnet 172.27.0.0 255.255.255.128 object network NETWORK_OBJ_172.27.0.0_26 subnet 172.27.0.0 255.255.255.192 object network obj-172.35.1.199 host 172.35.1.199 object network obj-192.168.51.5 host 192.168.51.5 object service 6004 service udp destination eq 6004 object network AT_Remote subnet 192.168.197.0 255.255.255.0 object-group service DM_INLINE_SERVICE_2 service-object icmp echo service-object icmp echo-reply service-object tcp-udp destination eq domain service-object tcp-udp destination eq www object-group network DM_INLINE_NETWORK_1 network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_2 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_3 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_16 network-object object MM network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 network-object object obj-192.168.180.0 object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group icmp-type DM_INLINE_ICMP_1 icmp-object echo icmp-object source-quench object-group network DM_INLINE_NETWORK_5 network-object object AHCCN network-object object MM network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_6 network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 network-object object obj-192.168.180.0 object-group service DM_INLINE_SERVICE_4 service-object icmp service-object icmp echo service-object icmp echo-reply object-group service DM_INLINE_SERVICE_5 service-object tcp-udp destination eq domain service-object tcp destination eq smtp service-object tcp destination eq ssh service-object icmp echo service-object icmp echo-reply service-object udp destination eq ntp service-object udp destination eq time object-group service DM_INLINE_SERVICE_6 service-object tcp-udp destination eq domain service-object tcp destination eq smtp service-object tcp destination eq ssh service-object icmp echo service-object icmp echo-reply service-object udp destination eq ntp service-object udp destination eq time object-group service DM_INLINE_SERVICE_0 service-object icmp echo service-object icmp echo-reply service-object tcp destination eq www service-object tcp destination eq https service-object tcp destination eq smtp service-object tcp-udp destination eq domain service-object object 6004 object-group network DM_INLINE_NETWORK_7 network-object object MM network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 network-object object obj-172.35.0.0 object-group network DM_INLINE_NETWORK_8 network-object 172.25.11.0 255.255.255.0 network-object 172.35.0.0 255.255.254.0 object-group service DM_INLINE_SERVICE_7 service-object tcp-udp destination eq domain service-object object 6004 service-object icmp echo service-object icmp echo-reply service-object tcp destination eq www service-object tcp destination eq https service-object tcp destination eq smtp object-group network DM_INLINE_NETWORK_10 network-object 172.25.11.0 255.255.255.0 network-object 172.35.0.0 255.255.254.0 object-group network DM_INLINE_NETWORK_9 network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 object-group network DM_INLINE_NETWORK_11 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group service DM_INLINE_SERVICE_1 service-object tcp-udp destination eq domain service-object tcp destination eq smtp service-object udp destination eq ntp object-group network DM_INLINE_NETWORK_13 network-object object AHCCN network-object object obj-172.25.11.0 object-group network DM_INLINE_NETWORK_14 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_12 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group service DM_INLINE_SERVICE_3 service-object tcp-udp destination eq domain service-object tcp destination eq smtp service-object udp destination eq ntp object-group service DM_INLINE_SERVICE_8 service-object tcp-udp destination eq domain service-object tcp destination eq smtp service-object udp destination eq ntp object-group service Exchange-6001 udp port-object range 6001 6004 object-group network DM_INLINE_NETWORK_15 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group service DM_INLINE_SERVICE_10 service-object ip service-object icmp echo service-object icmp echo-reply object-group service DM_INLINE_SERVICE_9 service-object ip service-object icmp echo service-object icmp echo-reply service-object tcp-udp destination eq domain service-object tcp destination eq citrix-ica service-object tcp destination eq www service-object tcp destination eq https object-group network DM_INLINE_NETWORK_18 network-object object AHCCN network-object object obj-172.25.11.0 object-group network DM_INLINE_NETWORK_19 network-object object obj-172.25.11.0 network-object object obj-172.35.0.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_20 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 object-group network DM_INLINE_NETWORK_17 network-object object AHCCN network-object object obj-172.25.11.0 network-object object obj-192.168.180.0 access-list Inside_nat0_outbound extended permit ip object-group DM_INLINE_NETWORK_10 object PMG access-list Inside_nat0_outbound extended permit ip object-group DM_INLINE_NETWORK_1 192.168.188.0 255.255.255.0 access-list Inside_nat0_outbound extended permit ip object-group DM_INLINE_NETWORK_7 object obj-172.27.0.0 access-list Outside_1_cryptomap extended permit ip 192.168.188.0 255.255.255.0 object-group DM_INLINE_NETWORK_14 access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_9 object AT_Remote object-group DM_INLINE_NETWORK_15 access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_4 any any access-list Outside_access_in extended permit ip object Mobile_Unit object-group DM_INLINE_NETWORK_12 log debugging access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_7 object PMG object-group DM_INLINE_NETWORK_8 access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_0 any object Exchange access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_5 any object SpamBox_1 access-list Outside_access_in extended permit object-group DM_INLINE_SERVICE_6 any object SpamBox_2 access-list Outside_access_in extended permit ip 192.168.188.0 255.255.255.0 object-group DM_INLINE_NETWORK_2 access-list Outside_access_in extended deny ip 127.0.0.0 255.255.255.0 any log access-list Outside_access_in extended deny ip 10.0.0.0 255.255.255.0 any log access-list Outside_access_in extended deny ip 169.254.0.0 255.255.0.0 any log access-list Outside_access_in extended deny ip 224.0.0.0 255.0.0.0 any log access-list Outside_access_in extended deny ip 239.0.0.0 255.0.0.0 any log access-list Outside_access_in extended deny ip 173.0.0.0 255.0.0.0 any log debugging access-list Outside_access_in extended deny ip 224.0.0.0 255.255.255.31 any access-list Outside_access_in extended deny ip 192.168.0.0 255.255.0.0 any access-list Outside_access_in extended deny ip any any access-list global_mpc extended permit ip any any access-list global_access extended permit udp object obj-172.35.1.199 any eq snmp log disable access-list global_access extended permit ip object obj-172.27.0.0 any access-list splitTunnelAcl standard permit 192.168.180.0 255.255.254.0 access-list splitTunnelAcl standard permit 172.35.0.0 255.255.254.0 access-list splitTunnelAcl standard permit 172.25.11.0 255.255.255.0 access-list splitTunnelAcl standard permit 10.90.254.0 255.255.255.0 access-list Outside_cryptomap_1 extended permit ip object PMG object-group DM_INLINE_NETWORK_13 access-list Inside_access_in extended permit ip object obj_any any access-list Inside_access_in extended permit icmp any any object-group DM_INLINE_ICMP_1 log disable access-list Inside_access_in extended permit object-group DM_INLINE_SERVICE_8 object Exchange any log access-list Inside_access_in extended permit object-group DM_INLINE_SERVICE_1 object SpamBox_1 any log access-list Inside_access_in extended permit object-group DM_INLINE_SERVICE_3 object SpamBox_2 any log access-list Inside_access_in extended deny ip any any access-list Outside_cryptomap_2 extended permit ip object-group DM_INLINE_NETWORK_17 object AT_Remote access-list Outside_cryptomap extended permit ip object-group DM_INLINE_NETWORK_18 object PMG log access-list Outside_cryptomap_4 extended permit ip object-group DM_INLINE_NETWORK_3 object Mobile_Unit pager lines 24 logging enable logging timestamp logging emblem logging rate-limit unlimited level 1 logging rate-limit unlimited level 6 logging rate-limit unlimited level 7 mtu Outside 1500 mtu Inside 1500 mtu management 1500 ip local pool Client_Pool 172.27.0.50-172.27.0.100 mask 255.255.255.0 ip local pool RA_POOL 172.27.0.1-172.27.0.49 mask 255.255.255.0 ip verify reverse-path interface Outside ip verify reverse-path interface Inside no failover icmp unreachable rate-limit 1 burst-size 1 icmp permit any Outside icmp permit any Inside asdm history enable arp timeout 14400 nat (Inside,Outside) source static DM_INLINE_NETWORK_9 DM_INLINE_NETWORK_9 destination static PMG PMG no-proxy-arp route-lookup nat (Inside,Outside) source static DM_INLINE_NETWORK_20 DM_INLINE_NETWORK_20 destination static AT_Remote AT_Remote no-proxy-arp route-lookup nat (Inside,Outside) source static DM_INLINE_NETWORK_5 DM_INLINE_NETWORK_5 destination static NETWORK_OBJ_172.27.0.0_25 NETWORK_OBJ_172.27.0.0_25 no-proxy-arp route-lookup nat (Inside,Outside) source static DM_INLINE_NETWORK_16 DM_INLINE_NETWORK_16 destination static NETWORK_OBJ_172.27.0.0_26 NETWORK_OBJ_172.27.0.0_26 no-proxy-arp route-lookup nat (Inside,Outside) source static DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 destination static obj-192.168.188.0 obj-192.168.188.0 no-proxy-arp nat (Inside,Outside) source static DM_INLINE_NETWORK_19 DM_INLINE_NETWORK_19 destination static Mobile_Unit Mobile_Unit no-proxy-arp route-lookup nat (Inside,Outside) source static DM_INLINE_NETWORK_11 DM_INLINE_NETWORK_11 destination static AT_Remote AT_Remote no-proxy-arp route-lookup ! object network obj_any nat (Inside,Outside) dynamic interface object network SpamBox_1 nat (Inside,Outside) static x.x.x.132 object network SpamBox_2 nat (Inside,Outside) static x.x.x.133 object network Exchange nat (Inside,Outside) static x.x.x.131 dns access-group Outside_access_in in interface Outside access-group Inside_access_in in interface Inside access-group global_access global route Outside 0.0.0.0 0.0.0.0 x.x.x..129 1 route Inside 10.90.254.0 255.255.255.0 192.168.180.1 1 route Inside 172.16.200.0 255.255.255.0 192.168.180.200 1 route Inside 172.25.10.0 255.255.255.0 192.168.180.200 1 route Inside 172.25.11.0 255.255.255.0 192.168.180.200 1 route Inside 172.25.12.0 255.255.255.0 192.168.180.200 1 route Inside 172.27.0.0 255.255.255.0 192.168.180.200 1 route Inside 172.29.0.0 255.255.0.0 192.168.180.200 1 route Inside 172.35.0.0 255.255.254.0 192.168.180.200 1 route Inside 192.168.182.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.183.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.184.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.185.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.186.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.187.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.189.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.190.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.191.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.192.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.194.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.195.0 255.255.255.0 192.168.180.200 1 route Inside 192.168.196.0 255.255.255.0 192.168.180.200 1 timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy aaa-server DC's protocol radius max-failed-attempts 5 aaa-server DC's (Inside) host 192.168.180.231 timeout 5 key ***** user-identity default-domain LOCAL http server enable http 192.168.180.0 255.255.255.0 Inside http 0.0.0.0 0.0.0.0 Inside http 172.27.0.0 255.255.255.0 Outside http 172.27.0.0 255.255.255.0 Inside snmp-server group Authentication&Encryption v3 priv snmp-server user trap Authentication&Encryption v3 encrypted auth md5 87:1d:3a:bd:50:49:7d:dc:45:89:a0:dc:c9:66:ed:78 priv 3des 87:1d:3a:bd:50:49:7d:dc:45:89:a0:dc:c9:66:ed:78:08:c6:ef:b2:7e:89:45:f2:6f:78:b5:01:33:47:68:c9 snmp-server host Inside 172.35.1.199 community ***** version 2c snmp-server host Inside 192.168.180.7 community ***** version 2c snmp-server location MLK snmp-server contact xxxxxxxx snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart snmp-server enable traps syslog snmp-server enable traps ipsec start stop snmp-server enable traps entity config-change fru-insert fru-remove snmp-server enable traps remote-access session-threshold-exceeded snmp-server enable traps cpu threshold rising snmp-server enable traps ikev2 start no sysopt connection reclassify-vpn sysopt connection preserve-vpn-flows crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto ipsec security-association lifetime seconds 43200 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map Outside_map 1 match address Outside_1_cryptomap crypto map Outside_map 1 set peer 173.10.204.46 crypto map Outside_map 1 set ikev1 phase1-mode aggressive crypto map Outside_map 1 set ikev1 transform-set ESP-3DES-SHA crypto map Outside_map 1 set ikev2 ipsec-proposal DES 3DES AES AES192 AES256 crypto map Outside_map 1 set ikev2 pre-shared-key ***** crypto map Outside_map 1 set security-association lifetime seconds 460800 crypto map Outside_map 4 match address Outside_cryptomap_1 crypto map Outside_map 4 set peer 207.190.237.254 crypto map Outside_map 4 set ikev1 phase1-mode aggressive group5 crypto map Outside_map 4 set ikev1 transform-set ESP-AES-128-SHA crypto map Outside_map 4 set ikev2 ipsec-proposal DES 3DES AES AES192 AES256 crypto map Outside_map 4 set security-association lifetime seconds 460800 crypto map Outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map 1 match address Outside_cryptomap_2 crypto map outside_map 1 set peer x.x.x.201 crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 2 match address Outside_cryptomap crypto map outside_map 2 set peer x.x.x.254 crypto map outside_map 2 set ikev1 phase1-mode aggressive group5 crypto map outside_map 2 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 2 set ikev2 ipsec-proposal DES 3DES AES AES192 AES256 crypto map outside_map 3 match address Outside_cryptomap_4 crypto map outside_map 3 set peer x.x.216.130 crypto map outside_map 3 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface Outside crypto ca trustpoint LOCAL-CA-SERVER keypair LOCAL-CA-SERVER crl configure crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=FPHC-ASA serial-number keypair LOCAL-CA-SERVER crl configure crypto ca server shutdown crypto ca certificate chain LOCAL-CA-SERVER certificate ca 01     308201ff 30820168 a0030201 02020101 300d0609 2a864886 f70d0101 05050030     13311130 0f060355 04031308 46504843 2d415341 301e170d 31323039 32303232     34393034 5a170d31 35303932 30323234 3930345a 30133111 300f0603 55040313     08465048 432d4153 4130819f 300d0609 2a864886 f70d0101 01050003 818d0030     81890281 8100e841 eeca425c 20c47a19 3b335924 30281111 cff571d7 0bb63dd8     5f3194f5 59d99cb1 60269694 aa13c591 505e0575 2de5ebb1 92d7c931 807f807b     6e84ee54 1da4ccaf 1f109f53 94c6e567 a8064e27 e27f3ea0 94f7bf32 2fe6064c     c2bbcd0d 7b0f8806 8614fcf9 80c6e4e1 83da75c5 080c7117 09e1d574 f17de8ac     1da4f2f9 f6e10203 010001a3 63306130 0f060355 1d130101 ff040530 030101ff     300e0603 551d0f01 01ff0404 03020186 301f0603 551d2304 18301680 144cb3da     6b6a5a14 c4b78674 49609b6b 8e58ea5f a3301d06 03551d0e 04160414 4cb3da6b     6a5a14c4 b7867449 609b6b8e 58ea5fa3 300d0609 2a864886 f70d0101 05050003     818100e0 7c9e15c3 13068614 788ff4d3 f282a4f4 fde72b00 3b05748f 0a4f68ec     6a7eb5fb 40c6d505 b1c35372 87102173 bb017e4b 2697c8f5 b66395f2 1418c77c     3e959343 84674b96 33558a08 629336c8 39c742bf 6b727b00 388a7102 8619cb5a     e4227aaf b58e267c 9e8b23d6 94cdc789 eb29cd96 1e579770 a2aa58ab 40694bb9 12888d   quit crypto ca certificate chain ASDM_TrustPoint0 certificate bd555b50     308201f7 30820160 a0030201 020204bd 555b5030 0d06092a 864886f7 0d010105     05003040 3111300f 06035504 03130846 5048432d 41534131 2b301206 03550405     130b4a4d 58313632 33583130 51301506 092a8648 86f70d01 09021608 46504843     2d415341 301e170d 31323039 32303232 35383434 5a170d32 32303931 38323235     3834345a 30403111 300f0603 55040313 08465048 432d4153 41312b30 12060355     0405130b 4a4d5831 36323358 31305130 1506092a 864886f7 0d010902 16084650     48432d41 53413081 9f300d06 092a8648 86f70d01 01010500 03818d00 30818902     818100e8 41eeca42 5c20c47a 193b3359 24302811 11cff571 d70bb63d d85f3194     f559d99c b1602696 94aa13c5 91505e05 752de5eb b192d7c9 31807f80 7b6e84ee     541da4cc af1f109f 5394c6e5 67a8064e 27e27f3e a094f7bf 322fe606 4cc2bbcd     0d7b0f88 068614fc f980c6e4 e183da75 c5080c71 1709e1d5 74f17de8 ac1da4f2     f9f6e102 03010001 300d0609 2a864886 f70d0101 05050003 8181008b c7a3e119     f1c6f60c 56ab7fd4 5096cfdf abb44331 fe3a0249 7f5fe79b 38a044c2 9a8b907d     12feba5d 6298a414 c4973369 040585b8 26b8b29e dfe7e226 0b10d08e 03658648     2fb0233e 27204339 c5a1c270 a0fec5b4 834340ac 9afefe75 4f802cb6 fb21b89c     9016e32c 2e772c00 191d23e0 036c4321 93a43b48 a6b682af 5dd5c0   quit crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 enable Outside crypto ikev1 enable Outside crypto ikev1 enable management crypto ikev1 policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 192.168.180.0 255.255.255.0 Inside telnet 172.27.0.0 255.255.255.0 Inside telnet timeout 10 ssh 192.168.180.0 255.255.255.0 Inside ssh 172.27.0.0 255.255.255.0 Inside ssh timeout 20 console timeout 0 management-access Inside vpn load-balancing interface lbpublic Outside interface lbprivate Inside threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp authenticate ntp server 50.77.217.185 source Outside prefer ntp server 216.171.120.36 source Outside webvpn group-policy "S2S-RA-Group Policy" internal group-policy "S2S-RA-Group Policy" attributes vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-client group-policy DfltGrpPolicy attributes vpn-filter value Inside_nat0_outbound vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless group-policy GroupPolicy_x.x.x.46 internal group-policy GroupPolicy_x.x.x.46 attributes vpn-filter value Outside_1_cryptomap vpn-tunnel-protocol ikev1 ikev2 group-policy GroupPolicy_x.x.x.254 internal group-policy GroupPolicy_x.x.x.254 attributes vpn-filter value Outside_cryptomap_1 vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec group-policy GroupPolicy_x.x.x.201 internal group-policy GroupPolicy_x.x.x.201 attributes vpn-filter value Outside_cryptomap_2 vpn-tunnel-protocol ikev1 group-policy GroupPolicy_x.x.216.130 internal group-policy GroupPolicy_x.x.216.130 attributes vpn-tunnel-protocol ikev1 group-policy VPN-GROUP2 internal group-policy VPN-GROUP2 attributes dns-server value 192.168.180.231 192.168.180.232 vpn-tunnel-protocol ikev1 split-tunnel-policy tunnelspecified split-tunnel-network-list value splitTunnelAcl default-domain value fphc.us group-policy VPN-GROUP internal group-policy VPN-GROUP attributes dns-server value 192.168.180.231 192.168.180.232 vpn-filter value splitTunnelAcl vpn-tunnel-protocol ikev1 l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value splitTunnelAcl default-domain value fphc.us username mark password YTp0IwzeNwb5kS8J encrypted privilege 15 tunnel-group DefaultRAGroup general-attributes default-group-policy VPN-GROUP tunnel-group x.x.x.46 type ipsec-l2l tunnel-group x.x.x.46 general-attributes default-group-policy GroupPolicy_x.x.x.46 tunnel-group x.x.x.46 ipsec-attributes ikev1 pre-shared-key ***** ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key ***** tunnel-group x.x.x.201 type ipsec-l2l tunnel-group x.x.x.201 general-attributes default-group-policy GroupPolicy_x.x.x.201 tunnel-group x.x.x.201 ipsec-attributes ikev1 pre-shared-key ***** tunnel-group VPN-GROUP type remote-access tunnel-group VPN-GROUP general-attributes address-pool Client_Pool authentication-server-group DC's default-group-policy VPN-GROUP tunnel-group VPN-GROUP ipsec-attributes ikev1 pre-shared-key ***** tunnel-group x.x.x.254 type ipsec-l2l tunnel-group x.x.x.254 general-attributes default-group-policy GroupPolicy_x.x.x.254 tunnel-group x.x.x.254 ipsec-attributes ikev1 pre-shared-key ***** ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key ***** tunnel-group VPN-GROUP2 type remote-access tunnel-group VPN-GROUP2 general-attributes address-pool RA_POOL authentication-server-group DC's default-group-policy VPN-GROUP2 tunnel-group VPN-GROUP2 ipsec-attributes ikev1 pre-shared-key ***** tunnel-group x.x.x.130 type ipsec-l2l tunnel-group x.x.x.130 general-attributes default-group-policy GroupPolicy_x.x.x.130 tunnel-group x.x.x.130 ipsec-attributes ikev1 pre-shared-key ***** tunnel-group PMG type ipsec-l2l tunnel-group PMG general-attributes default-group-policy GroupPolicy_x.x.x.254 tunnel-group PMG ipsec-attributes ikev1 pre-shared-key ***** ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key ***** tunnel-group-map default-group DefaultL2LGroup ! class-map global-class match access-list global_mpc class-map inspection_default match default-inspection-traffic class-map http_https description http_https match access-list Outside_access_in ! ! policy-map type inspect dns preset_dns_map parameters   message-length maximum client auto   message-length maximum 512 policy-map global_policy class inspection_default   inspect dns preset_dns_map   inspect ftp   inspect h323 h225   inspect h323 ras   inspect rsh   inspect rtsp   inspect sqlnet   inspect skinny    inspect sunrpc   inspect xdmcp   inspect sip    inspect netbios   inspect tftp   inspect ip-options class global-class   user-statistics accounting policy-map http_https class http_https   set connection timeout idle 1:15:00 reset   user-statistics accounting ! service-policy global_policy global service-policy http_https interface Outside smtp-server 192.168.180.235 prompt hostname context no call-home reporting anonymous Cryptochecksum:fcb4c2d9a982c11054c31ee4db778012 : end 

5505 remote site

ASA Version 8.2(5) ! hostname AT-Remote domain-name fphc.us enable password 8Ry2YjIyt7RRXU24 encrypted passwd 2KFQnbNIdI.2KYOU encrypted names name 172.35.0.0 AHCCN name 172.25.11.0 AHCCN-1 name 192.168.180.0 FPHC ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 switchport trunk allowed vlan 1,30 switchport trunk native vlan 1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.197.250 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address x.x.x.201 255.255.255.252 ! ! boot system disk0:/asa825-k8.bin ftp mode passive dns domain-lookup inside dns domain-lookup outside dns server-group DefaultDNS name-server 68.87.68.162 name-server 68.87.74.162 domain-name fphc.us dns server-group DNS_Internal name-server 192.168.180.231 name-server 192.168.180.232 domain-name fphc.us same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group network obj_any object-group network 172.25.11.0 object-group network 172.35.0.0 object-group network 192.168.180.0 object-group network ASA-FW object-group network Comcast_Outside object-group network AT_Local object-group network NETWORK_OBJ_192.168.197.0_24 object-group icmp-type DM_INLINE_ICMP_1 icmp-object echo icmp-object echo-reply object-group service DM_INLINE_SERVICE_3 service-object ip service-object icmp echo service-object icmp echo-reply object-group service DM_INLINE_SERVICE_2 service-object ip service-object icmp object-group network obj_remote object-group network Franklin_Remote network-object AHCCN-1 255.255.255.0 network-object AHCCN 255.255.254.0 network-object FPHC 255.255.254.0 access-list outside_access_in extended permit ip object-group Franklin_Remote 192.168.197.0 255.255.255.0 access-list outside_access_in extended permit icmp any any object-group DM_INLINE_ICMP_1 log debugging access-list inside_access_in extended permit ip any any log access-list inside_access_in extended permit icmp any any echo log access-list outside_1_cryptomap extended permit ip 192.168.197.0 255.255.255.0 object-group Franklin_Remote access-list inside_nat0_outbound extended permit ip 192.168.197.0 255.255.255.0 object-group Franklin_Remote access-list inside_nat_outbound extended permit ip any interface outside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 no failover icmp unreachable rate-limit 1 burst-size 1 icmp permit any outside asdm image disk0:/asdm-645.bin no asdm history enable arp timeout 14400 global (outside) 101 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 101 access-list inside_nat_outbound access-group inside_access_in in interface inside access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 x.x.x.202 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 0.0.0.0 0.0.0.0 inside http 192.168.197.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart sysopt connection preserve-vpn-flows sysopt noproxyarp inside sysopt noproxyarp dmz crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 43200 crypto ipsec security-association lifetime kilobytes 4608000 crypto map outside_map 1 match address outside_1_cryptomap crypto map outside_map 1 set peer 216.86.7.130 crypto map outside_map 1 set transform-set ESP-3DES-SHA crypto map outside_map interface outside crypto ca trustpoint _SmartCallHome_ServerCA crl configure crypto ca certificate chain _SmartCallHome_ServerCA certificate ca 6ecc7aa5a7032009b8cebcf4e952d491     308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130     0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117     30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b     13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504     0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72     20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56     65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043     65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31     30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b     30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20     496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65     74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420     68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329     3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365     63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7     0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597     a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10     9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc     7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b     15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845     63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8     18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced     4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f     81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201     db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868     7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101     ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8     45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777     2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a     1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406     03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973     69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403     02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969     6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b     c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973     69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30     1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603     551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355     1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609     2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80     4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e     b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a     6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc     481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16     b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0     5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8     6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28     6c2527b9 deb78458 c61f381e a4c4cb66   quit crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption aes-256 hash sha group 2 lifetime 86400 crypto isakmp policy 20 authentication rsa-sig encryption aes-256 hash sha group 2 lifetime 86400 crypto isakmp policy 30 authentication pre-share encryption aes-256 hash sha group 2 lifetime 86400 crypto isakmp policy 40 authentication crack encryption aes-192 hash sha group 2 lifetime 86400 crypto isakmp policy 50 authentication rsa-sig encryption aes-192 hash sha group 2 lifetime 86400 crypto isakmp policy 60 authentication pre-share encryption aes-192 hash sha group 2 lifetime 86400 crypto isakmp policy 70 authentication crack encryption aes hash sha group 2 lifetime 86400 crypto isakmp policy 80 authentication rsa-sig encryption aes hash sha group 2 lifetime 86400 crypto isakmp policy 90 authentication pre-share encryption aes hash sha group 2 lifetime 86400 crypto isakmp policy 100 authentication crack encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 110 authentication rsa-sig encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 120 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 130 authentication crack encryption des hash sha group 2 lifetime 86400 crypto isakmp policy 140 authentication rsa-sig encryption des hash sha group 2 lifetime 86400 crypto isakmp policy 150 authentication pre-share encryption des hash sha group 2 lifetime 86400 telnet 0.0.0.0 0.0.0.0 inside telnet x.x.x.130 255.255.255.255 outside telnet timeout 5 ssh timeout 5 console timeout 0 management-access inside dhcpd address 192.168.197.25-192.168.197.100 inside dhcpd dns 192.168.180.232 68.87.74.162 interface inside dhcpd domain fphc.us interface inside dhcpd enable inside ! dhcprelay timeout 60 threat-detection basic-threat threat-detection statistics host threat-detection statistics protocol threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy DfltGrpPolicy attributes vpn-filter value outside_1_cryptomap group-policy GroupPolicy_216.86.7.130 internal group-policy GroupPolicy_216.86.7.130 attributes vpn-filter value inside_nat0_outbound vpn-tunnel-protocol IPSec l2tp-ipsec tunnel-group x.x.x.130 type ipsec-l2l tunnel-group x.x.x.130 general-attributes default-group-policy GroupPolicy_216.86.7.130 tunnel-group x.x.x.130 ipsec-attributes pre-shared-key ***** tunnel-group-map default-group DefaultL2LGroup ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters   message-length maximum 512 policy-map global_policy class inspection_default   inspect ftp   inspect h323 h225   inspect h323 ras   inspect rsh   inspect rtsp   inspect sqlnet   inspect skinny    inspect sunrpc   inspect xdmcp   inspect sip    inspect netbios   inspect tftp   inspect ip-options   inspect dns ! service-policy global_policy global prompt hostname context : end 

Hello

The reason for the DECLINE suggests that the ASA has still attached to the L2L VPN VPN filter configuration that prevents traffic.

Check the configuration and remove atleast VPN filter temporarily for testing purposes.

-Jouni

Tags: Cisco Security

Similar Questions

  • Site to Site VPN ASA 5510

    OK my forehead is painful to all keyboard strokes that I know that it must be something simple, but I am brand new to the SAA.  I had a site to site VPN configuration via routers 1751 that worked very well, but we're looking to add some more remote field offices, and I felt that it would be easier to maintain several sites is on the ASA 5510.  I have the VPN configured on the SAA and he said that the tunnel is up.  I can telnet to the ASA and ping the remote gateway on the even side of VPN and it pings fine.  If I try to ping on a local computer, I get a "Request timed out".  If I makes no changes apart from go to the computer room and replace the network cable the 1751 and then through the 1751 I can now ping the remote door way to my computer.  The remote router works obviously very well, my statement of route on my router for vpn push through the ASA (same ip address) IP traffic that has been used by the 1751 works obviously. It seems so just like ASA is not being pushed in the ethernet0/0 VPN traffic or at least it is not encrypted.  I also noticed that the ACL for NAT seems to increase in number of access either it seems, there is really just one small thing missing to make the ASA except and encrypt incoming traffic on ethernet0/0:

    My network is not configured with a DMZ is something like that, the ASA ethernet0/0 and my local network on the same subnet:

    Router (Cisco 2811)

    |

    Layer switch 2 (ProCurve)

    |                                      |

    ASA5510 LAN computers

    I'm trying to except both sides of the VPN in and out on Ethernet0/0 traffic I saw there was a framework for this "permit communication between VPN peers connected to the same interface' and I've activated this option.

    In short, I need to understand why the VPN tunnel shows that upward and I can ping the remote of the SAA, but peripheral gateway on my network can not ping to the remote gateway through the int Ethernet0/0 on the SAA.

    From the console of the ASA, I get this:

    ASA5510 # ping 192.52.128.1
    Send 5, echoes ICMP 100 bytes to 192.52.128.1, wait time is 2 seconds:
    !!!!!
    Success rate is 100 per cent (5/5), round-trip min/avg/max = 100/108/120 ms

    ASA5510 # show crypto ipsec his
    Interface: *.
    Tag crypto map: * _map, local addr: 10.52.120.23

    local ident (addr, mask, prot, port): (10.52.120.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (192.52.128.0/255.255.255.0/0/0)
    current_peer: x.x.x.204

    program #pkts: 9, #pkts encrypt: 9, #pkts digest: 9
    decaps #pkts: 9, #pkts decrypt: 9, #pkts check: 9
    compressed #pkts: 0, unzipped #pkts: 0
    #pkts uncompressed: 9, #pkts comp failed: 0, #pkts Dang failed: 0
    #send errors: 0, #recv errors: 0

    local crypto endpt. : 10.52.120.23, remote Start crypto. : x.x.x.204

    Path mtu 1500, fresh ipsec generals 60, media, mtu 1500
    current outbound SPI: C49EF75F

    SAS of the esp on arrival:
    SPI: 0x21FDBB9D (570276765)
    transform: esp-3des esp-md5-hmac
    running parameters = {L2L, Tunnel}
    slot: 0, id_conn: 1, crypto-map: * _map
    calendar of his: service life remaining (KB/s) key: (3824999/3529)
    Size IV: 8 bytes
    support for replay detection: Y
    outgoing esp sas:
    SPI: 0xC49EF75F (3298752351)
    transform: esp-3des esp-md5-hmac
    running parameters = {L2L, Tunnel}
    slot: 0, id_conn: 1, crypto-map: * _map
    calendar of his: service life remaining (KB/s) key: (3824999/3527)
    Size IV: 8 bytes
    support for replay detection: Y

    From my office on the 10.52.120.0 even the etherenet0/0 interface on the ASA network I get this:

    C:\Users\***>ping 192.52.128.1

    Ping 192.52.128.1 with 32 bytes of data:
    Request timed out.
    Request timed out.
    Request timed out.
    Request timed out.

    Ping statistics for 192.52.128.1:
    Packets: Sent = 4, received = 0, lost = 4 (100% loss)

    C:\Users\***>ping 10.52.120.23

    Ping 10.52.120.23 with 32 bytes of data:
    Reply from 10.52.120.23: bytes = 32 time = 5ms TTL = 255
    Reply from 10.52.120.23: bytes = 32 time = 3ms TTL = 255
    Reply from 10.52.120.23: bytes = 32 time = 1ms TTL = 255
    Reply from 10.52.120.23: bytes = 32 time = 1ms TTL = 255

    Ping statistics for 10.52.120.23:
    Packets: Sent = 4, received = 4, lost = 0 (0% loss),
    Time approximate round trip in milli-seconds:
    Minimum = 1ms, Maximum = 5ms, average = 2ms

    Count on VPN Tunnel ACL does not increase when I try to ping the address of the remote gateway.

    Here is the running of the ASA configuration:

    ASA Version 7.0 (2)
    names of
    !
    interface Ethernet0/0
    nameif InsideNetwork
    security-level 100
    IP 10.52.120.23 255.255.255.0
    !
    interface Ethernet0/1
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    interface Ethernet0/2
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    interface Management0/0
    Shutdown
    nameif management
    security-level 100
    IP 192.168.1.1 255.255.255.0
    management only
    !
    activate the encrypted password of XXXXXXXXXXXXXXXX
    passwd encrypted XXXXXXXXXXXXXXXXXXX
    ciscoasa hostname
    domain default.domain.invalid
    passive FTP mode
    permit same-security-traffic intra-interface
    Access extensive list ip 10.52.120.0 InsideNetwork_nat0_outbound allow 255.255.25
    5.0 192.52.128.0 255.255.255.0
    Access extensive list ip 10.52.120.0 InsideNetwork_cryptomap_20 allow 255.255.255
    .0 192.52.128.0 255.255.255.0
    pager lines 24
    asdm of logging of information
    management of MTU 1500
    MTU 1500 InsideNetwork
    management of the interface of the monitor
    the interface of the monitor InsideNetwork
    ASDM image disk0: / asdm - 502.bin
    don't allow no asdm history
    ARP timeout 14400
    NAT (InsideNetwork) 0-list of access InsideNetwork_nat0_outbound
    Route InsideNetwork 0.0.0.0 0.0.0.0 10.52.120.1 1
    Timeout xlate 03:00
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00
    Timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
    Timeout, uauth 0:05:00 absolute
    Enable http server
    http 192.168.1.0 255.255.255.0 management
    http 10.52.120.0 255.255.255.0 InsideNetwork
    No snmp server location
    No snmp Server contact
    Server enable SNMP traps snmp
    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
    card crypto InsideNetwork_map 20 corresponds to the address InsideNetwork_cryptomap_20
    card crypto InsideNetwork_map 20 set peer x.x.x.204
    InsideNetwork_map 20 transform-set ESP-3DES-MD5 crypto card game
    InsideNetwork_map InsideNetwork crypto map interface
    ISAKMP enable InsideNetwork
    part of pre authentication ISAKMP policy 10
    ISAKMP policy 10 3des encryption
    ISAKMP policy 10 md5 hash
    10 2 ISAKMP policy group
    ISAKMP life duration strategy 10 86400
    Telnet 10.52.120.0 255.255.255.0 InsideNetwork
    Telnet timeout 5
    SSH timeout 5
    Console timeout 0
    management of 192.168.1.2 - dhcpd address 192.168.1.254
    dhcpd lease 3600
    dhcpd ping_timeout 50
    enable dhcpd management
    tunnel-group x.x.x.204 type ipsec-l2l
    x.x.x.204 group of tunnel ipsec-attributes
    pre-shared-key *.
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    Policy-map global_policy
    class inspection_default
    inspect the dns-length maximum 512
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    inspect the rsh
    inspect the rtsp
    inspect esmtp
    inspect sqlnet
    inspect the skinny
    inspect sunrpc
    inspect xdmcp
    inspect the sip
    inspect the netbios
    inspect the tftp
    !
    global service-policy global_policy
    Cryptochecksum:7e478b60b3e406091de466675c52eaaa
    : end

    I haven't added anything to the config except what seemed necessary to get the job of VPN tunnel.  It should be fairly clean.

    Thanks in advance for any help... I really hope that it is something really simple as a recruit ASA just forgot

    Strange, but good news. Thanks for the update. I'm glad everything is working.

    THX

    MS

  • Site to Site VPN - ASA 5510 / 851 router - no Sas?

    We have installed an ASA 5510, version 1.0000 software running.  In a remote area, we have a Cisco router to 851 with tunneling IPSec VPN for a PIX 515e.  I try to open a backup between the 851 and ASA connection new, and I have a problem.  I used ASDM on the side of the ASA and CCP on the side 851 and created a new VPN site to site on both, with PSK encryption algorithms, etc..  I checked the connectivity between the external interfaces of the two devices, and the associated ACLs are simple, because they allow all IP traffic on the internal side of the two devices to talk with each other.

    When I do a "crypto isakmp to show his" on the SAA, I get "there is no its isakmp.  When I do the same on the 851 router, I see only the existing connection to the PIX.  It seems that the tunnel does not run again.  I turned on debug various crypto and sent a series of pings, and I don't see any tunnel initiaion even be attempted.

    CCP has a VPN to test the tool built in to the router.  ASDM has a similar feature?  Here's the relevant configs (at least I think... the SAA is enough Greek to me):

    ASA 5510 (within the network of 10.20.0.0/16.  The perfectly functional PIX is also on this network, with a different public IP address)

     access-list ATTOutside_2_cryptomap extended permit ip object-group DM_INLINE_NETWORK_1 10.192.0.0 255.255.0.0 ! 
    nat (Inside,ATTOutside) source static NETWORK_OBJ_10.20.0.0_16 NETWORK_OBJ_10.20.0.0_16 destination static NETWORK_OBJ_10.192.0.0_16 NETWORK_OBJ_10.192.0.0_16 
    !
    crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto map ATTOutside_map 2 match address ATTOutside_2_cryptomap crypto map ATTOutside_map 2 set peer 24.140.152.144 crypto map ATTOutside_map 2 set transform-set ESP-3DES-MD5 crypto map ATTOutside_map interface ATTOutside 
    !
    crypto isakmp enable ATTOutside crypto isakmp enable Inside crypto isakmp policy 10 authentication crack encryption aes-256 hash sha group 2 lifetime 86400 crypto isakmp policy 20 authentication rsa-sig encryption aes-256 hash sha group 2 lifetime 86400 crypto isakmp policy 30 authentication pre-share encryption aes-256 hash sha group 2 lifetime 86400 crypto isakmp policy 40 authentication crack encryption aes-192 hash sha group 2 lifetime 86400 crypto isakmp policy 50 authentication rsa-sig encryption aes-192 hash sha group 2 lifetime 86400 crypto isakmp policy 60 authentication pre-share encryption aes-192 hash sha group 2 lifetime 86400 crypto isakmp policy 70 authentication crack encryption aes hash sha group 2 lifetime 86400 crypto isakmp policy 80 authentication rsa-sig encryption aes hash sha group 2 lifetime 86400 crypto isakmp policy 90 authentication pre-share encryption aes hash sha group 2 lifetime 86400 crypto isakmp policy 100 authentication crack encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 110 authentication rsa-sig encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 120 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 130 authentication crack encryption des hash sha group 2 lifetime 86400 crypto isakmp policy 140 authentication rsa-sig encryption des hash sha group 2 lifetime 86400 crypto isakmp policy 150 authentication pre-share encryption des hash sha group 2 lifetime 86400 crypto isakmp policy 170 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 
    !
    tunnel-group 24.140.152.144 type ipsec-l2l tunnel-group 24.140.152.144 ipsec-attributes 
    !
    851 router (within the 10.192.4.0/24 network)

    crypto isakmp policy 1

    encr 3des

    authentication pre-share

    group 2

    !

    crypto isakmp policy 2

    encr 3des

    authentication pre-share

    group 2

    !

    crypto isakmp policy 3

    encr 3des

    hash md5

    authentication pre-share

    group 2

    crypto isakmp key si9bw1u8woaz address 65.42.15.142

    crypto isakmp key 123 address 12.49.251.3

    !

    !

    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac

    crypto ipsec transform-set ESP-3DES-SHA1 esp-3des esp-sha-hmac

    crypto ipsec transform-set ESP-3DES-SHA2 esp-3des esp-sha-hmac

    crypto ipsec transform-set ESP_3DES_MD5 esp-3des esp-md5-hmac

    !

    crypto map SDM_CMAP_1 1 ipsec-isakmp

    description Tunnel to65.42.15.142

    set peer 65.42.15.142

    set transform-set ESP-3DES-SHA1

    match address 102

    crypto map SDM_CMAP_1 2 ipsec-isakmp

    description Tunnel to12.49.251.3

    set peer 12.49.251.3

    set transform-set ESP_3DES_MD5

    match address 102

    !

    access-list 102 permit ip 10.192.4.0 0.0.0.255 10.20.0.0 0.0.255.255

    access-list 102 permit ip 10.192.4.0 0.0.0.255 10.1.0.0 0.0.255.255

    access-list 102 permit ip 10.192.4.0 0.0.0.255 10.10.0.0 0.0.255.255

    access-list 102 permit ip 10.192.4.0 0.0.0.255 10.11.0.0 0.0.255.255

    access-list 102 permit ip 10.192.4.0 0.0.0.255 10.12.0.0 0.0.255.255

    access-list 102 permit ip 10.192.4.0 0.0.0.255 10.13.0.0 0.0.255.255

    access-list 102 permit ip 10.192.4.0 0.0.0.255 10.14.0.0 0.0.255.255

    access-list 102 permit ip 10.192.4.0 0.0.0.255 10.18.0.0 0.0.255.255

    access-list 102 permit ip 10.192.4.0 0.0.0.255 10.19.0.0 0.0.255.255

    access-list 102 permit ip 10.192.4.0 0.0.0.255 10.22.0.0 0.0.255.255

    access-list 102 permit ip 10.192.4.0 0.0.0.255 10.23.0.0 0.0.255.255

    Michael,

    Since you are using the same ACL, subnets, even and even while on your router to your VPN 1 tunnels config and 2, your second VPN tunnel will not succeed because the router already has a tunnel with the PIX for the same traffic.

    If you want to configure the ASA as peer backup scratch the second card encryption and instead, add the public IP ASA as a second peer under the original crypto configuration.

    Like this:

    crypto map SDM_CMAP_1 1 ipsec-isakmp

    description Tunnel to65.42.15.142

    set peer 65.42.15.142

    set peer 12.49.251.3

    game of transformation-ESP-3DES-SHA1

    match address 102

    The router will attempt to connect to the PIX and if this fails (which means that the PIX has never responded) then it will try to connect to the ASA.

    To test it, you could do either of two things: 1. taking the internet conection low PIX will make the router try to connect to the secondary host. 2: change (temporarily) on the router address peer of the PIX to a bogus IP that won't respond, when only one omits the router must try to negotiate with the ASA.

    I hope this helps.

    Raga

  • WiFi comments at the Public VPN (ASA-5510)

    Hello

    I have an ASA 5510, that has the following configuration:

    interface Ethernet0/0

    nameif outside

    security-level 0

    address IP 1.1.1.1 255.255.255.240 (fake IP for obvious reasons)

    interface Ethernet0/1

    nameif inside

    security-level 100

    IP 192.168.0.200:ABCD 255.255.0.0

    interface Ethernet0/2

    nameif comments

    security-level 100

    IP 10.10.10.1 255.255.0.0

    Global 1 interface (outside)

    NAT (inside) 0 access-list sheep

    NAT (inside) 1 0.0.0.0 0.0.0.0

    NAT (guest) 0 access-list sheep

    NAT (guest) 1 0.0.0.0 0.0.0.0

    -------------------------------

    What I do for a client (eth0/2) Wifi comments access to our VPN configured on the external interface?  It is a Cisco AnyConnect VPN installation using the mobile client.  As it is, they identify the DNS since the WAP and try to connect to "vpn.mysite.com", which resolves itself into the public IP (interface) outside my ASA.

    When I was asked first to authorize this change, I thought it would be a simple NAT rule but I think I'm missing something that I can't get this to work.

    Thank you

    They are not capable of VPN for the external interface of the IP address of the guest network because it is by design not permitted.

    They need to connect to the IP comments to be able to VPN to ASA comments network, and you will need to activate AnyConnect on the interface of comments as well. "vpn.mysite.com" would then need to resolve the IP comments when they are connected via the comments interface.

  • SSL VPN ASA 5510 connect Any

    Hello

    I want to configure SSL VPN for mobile users on ASA 5510 I have following requirements

    > What are the condition of licence on ASA 5510 VPN with Anyconnect SSL?

    > VPN users have full access to the local network via ASA

    > Authentication method preferred, Local or AD (LDAP)

    > users use not laptops should be limited to the Clientless SSL VPN

    > How to add a URL is visible to users in the Web page

    > Can someone view example configuration for the above requirements

    TIA

    Hitesh Vinzoda

    > If you need both AnyConnect and WebVPN (Clientless SSL VPN), you can buy the AnyConnect Premium license (and this is a base user license). The ASA would come with default 2 SSL VPN license.

    > To have full access to the local network, you must use AnyConnect SSL VPN. Here is an example of configuration:

    http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00808efbd2.shtml

    > You can authenticate to AD or Local or RADIUS, etc. By default, this would be local authentication.

    > Here's some example configuration for clientless SSL VPN:

    http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a008072462a.shtml

    http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00806ea271.shtml

    Hope that helps.

  • ASA base S2S VPN, Tunnel establishes only when interesting traffic hits to end distance

    Dear all,

    I need your help to solve the problem mentioned below.

    VPN tunnel established between the unit two ASA.   A DEVICE and device B

    (1) if interesting traffic initiates a LAN device. traffic ACL hits. TUNEL is not coming

    (2) if interesting traffic initiates B LAN device. Tunnel will establish all the works of serivces

    (3) after the Tunnel device establishmnet B. We forced to tunnel down at both ends. Interesting again traffic initiates device a surpringly tunnel

    will go up.   After 2 or 3 days (after life expire 86400 seconds) initiated traffic of device A, tunnel will not esatblish.

    (it comes to rescue link: interesting won't be there all the time.)

    checked all parametrs, everthing seems fine. Here are the logs of attached but not more informative debugging on the balls. Please suggest.

    February 2, 2010 13:23:17: % ASA-7-713236: IP = 81.145.x.x, IKE_DECODE new SEND Message (msgid = 0) with payloads: HDR + HER (1), SELLER (13) + (0) NONE total length: 496

    February 2, 2010 13:23:18: % ASA-6-713219: IP = 81.x.x.x, KEY-ACQUIRE Queuing messages are treated when SA P1 is finished.

    February 2, 2010 13:23:18: % ASA-6-713219: IP = 81.x.x.x, KEY-ACQUIRE Queuing messages are treated when SA P1 is finished.

    February 2, 2010 13:23:23: % ASA-6-713219: IP = 81.x.x.x, KEY-ACQUIRE Queuing messages are treated when SA P1 is finished.

    February 2, 2010 13:23:25: % ASA-7-715065: IP = 81.x.x.x, history of mistake IKE MM Initiator WSF (struct & 0x1abb1e10) , : MM_DONE, EV_ERROR--> MM_WAIT_MSG2, EV_RETRY--> MM_WAIT_MSG2, EV_TIMEOUT--> MM_WAIT_MSG2 NullEvent--> MM_SND_MSG1, EV_SND_MSG--> MM_SND_MSG1, EV_START_TMR--> MM_SND_MSG1, EV_RESEND_MSG--> MM_WAIT_MSG2, EV_RETRY

    February 2, 2010 13:23:25: % ASA-7-713906: IP = 81.x.x.x, IKE SA MM:56f95c85 ending: flags 0 x 01000022, refcnt 0, tuncnt 0

    February 2, 2010 13:23:25: % ASA-7-713906: IP = 81.x.x.x, sending clear/delete with the message of reason

    February 2, 2010 13:23:25: % ASA-3-713902: IP = 81.x.x.x, counterpart of drop table counterpart, didn't match!

    February 2, 2010 13:23:25: % ASA-4-713903: IP = 81.x.x.x, error: cannot delete PeerTblEntry

    Hi, I have a similar problem a long time ago. You can choose which set up the tunnel in your crypto card:

    card crypto bidirectional IPsec_map 1 set-type of connection

    I hope that it might help to solve your problem. Kind regards.

  • Site to Site VPN between 5510 and 5505

    Am trying to get a VPN site-to site and the race between a branch office and our main office. I have the settings in place, but I'm trying to determine if it's my settings or the provider DSL, Verizon.

    They have a 5505 with a static IP is connected by cable modem. Their 5505 I can ping external IP of my 5510 without problem. All the settings are correct on both sides; they reflect the same settings and yet static VPN is not launched.

    Is there some sort of CLI command I must issue to bring it?

    Also, I was wondering if maybe my 2821 prevents all VPN traffic because it doesn't have to be re - NAT'ed to the 192.168.250.0/23 and 192.168.252.0/24 subnets.

    Simply to traffic of their 192.168.40.0 in our 192.168.250.0/23 VOIP subnet subnet.

    Join a basic outline. I can provide the configs for almost everything

    Hello

    you have two instances of sequence card crypto with parameters similar (except transform set). Get rid of the rest of sequences card crypto:

    On the ASA Satellite:

    no card crypto outside_map 2 match address outside_cryptomap

    no card crypto outside_map 2 set pfs

    no card crypto outside_map 2 peers set smivpn.sorensonmedia.com

    no card crypto outside_map 2 the transform-set ESP-3DES-MD5 value

    No crypto outside_map 2 set security-association life card seconds 28800

    No kilobytes of life card crypto outside_map 2 set security-association 4608000

    no card crypto outside_map 2 the value reverse-road

    About the ASA company:

    No crypto outside_map 1 game card address outside_1_cryptomap_1

    no card crypto outside_map 1 set pfs

    no card crypto outside_map 1 set cda.asa5505 counterpart

    no card crypto outside_map 1 the value transform-set ESP-3DES-SHA

    no card crypto outside_map 1 lifetime of security association set seconds 28800

    No kilobytes of life card crypto outside_map 1 set security-association 4608000

    no card crypto outside_map 1 the value reverse-road

    Then check and capture debugs.

    HTH

    Sangaré

  • VPN - ASA 5510 L2L: internal error...

    Hello

    I'm trying to connect an astaro by l2l - vpn firewall to an asa5510.

    I still have the following message.

    Who is wrong? (checked the settings already)

    Concerning

    Marc

    ASA % ASA-4-713903: Group = x.x.x.x, IP = x.x.x.x, memory previously allocated release for authorization-dn-attributes

    ASA % ASA-3-713119: Group = x.x.x.x, IP = x.x.x.x, PHASE 1 COMPLETED

    ASA % ASA-5-713904: Group = x.x.x.x, IP = x.x.x.x, IPSec security association proposals found unacceptable.

    ASA % ASA-3-713902: Group = x.x.x.x IP x.x.x.x, QM WSF error = (P2 struct & 0x7bc32f0, mess id 0xc5da78b7).

    ASA % ASA-3-713902: Group = x.x.x.x, IP = x.x.x.x, removing counterpart of correlator table failed, no match!

    ASA % ASA-3-713231: Group = x.x.x.x, IP = x.x.x.x, Internal Error, ike_lock try to unlock the little that it is not locked for type SA_LOCK_P1_SA_CREATE

    ASA % ASA-3-713232: Group = x.x.x.x, IP = x.x.x.x, ITS lock refCnt = 0, the bitmask = 00000000, p1_decrypt_cb = 0, qm_decrypt_cb = 1, qm_hash_cb = 0, qm_spi_ok_cb = 0, qm_dh_cb = 0, qm_secret_key_cb = 0, qm_encrypt_cb = 0

    ASA % ASA-3-713902: Group = x.x.x.x, IP = x.x.x.x, removing counterpart of correlator table failed, no match!

    ASA % ASA-4-113019: Group = x.x.x.x, Username = x.x.x.x, IP = x.x.x.x, disconnected Session. Session type: IPSecLAN2LAN, duration: 0 h: 00 m: 00s, xmt bytes: 0, RRs bytes: 0, right: Phase 2 Mismatch

    Thanks Marc.

    Eric

    214.298.7610

  • Site to Site VPN is in place, but no traffic passes through.

    Hello.  I'm sure this is a lot but I tear my hear and do not have cisco skills to solve this problem.  I hope someone here can identify what's wrong in my setup.

    Using the Cisco Configuration professional software, I created a VPN connection from site to site (between a cisco 1841 and 1811).

    The tunnel seems to be upward, as routers are concerned, but I can't ping anything on the remote networks. I thought that road maps have had something to do with it, but I don't see what is worng with them.

    Just to let you know, the device of 1841 has already a VPN tunnel works to another site, in case that confuses everyone.  Peers that I am concerned about are 141.0.59.x and 109.238.78.x.

    Thank you very much.

    Hi Haydin,

    You have the following:

    IP extended access list redirects the port

    deny ip 192.168.1.0 0.0.0.255 192.168.3.0 0.0.0.255

    ip permit 192.168.1.0 0.0.0.255 any

    !

    Not sure why you have the entire network here with any keyword, it is better to create a static translation of one by one.

    Could you please remove it and give it a try?

    IP extended access list redirects the port

    no permit ip 192.168.1.0 0.0.0.255 any

    Thanks in advance.

  • ASA 5510: beat s2s VPN

    Hi all

    I have a VPN of n-star with 5510 boxes in several places.

    Users complaining that s2s links are beat from time to time for both places.

    Here's the log output for the moments where the links are torn down:

    First spoke:

    07/07/2010-20:17:09 Local4.Notice % 713259-5-ASA: group = , IP = , Session is to be demolished. Reason: The user has requested
    07/07/2010-20:17:09 Local4.Notice % 5-ASA-713050: group = , IP = , missed connection for peer Reason: terminate Peer  Remote proxy 10.3.0.0 Proxy Local 172.16.100.0

    Second spoke:

    07/07/2010-18:34:45 Local4.Notice % 713259-5-ASA: group = , IP = , Session is to be demolished. Reason: Idle Timeout

    07/07/2010-18:34:45 Local4.Notice % 5-ASA-713050: group = , IP = , missed connection for peer Reason: IPSec SA time-out  Remote proxy 10.5.0.0, Proxy Local 172.16.100.0

    I think the bold text is the reason. But I don't know why a connection stop remote site1 and why to site2 is timeouts.

    I have HIS lifitime for 24h\4Gb to each ASA and the volume of traffic or time never pass in this case, KeepAlive is enabled to the ASA hub as well. I see a number or a "spacing" all day with the same reasons for termination that I presented above. Anyone has a suggestion or idea why s2s VPN are hinged and how make them more stable even if the traffic is not flowing throughout.

    Thanks in advance.

    Sergey,

    No matter how lucky you have vpn time-out configured on one of the sides (it may be in default group policy perhaps?)  (see the race from all political group | I vpn)

    "IPSec SA time-out"

    HTH,

    Marcin

  • How to pass the traffic of a site VPN S2S by ASA to another S2S VPN site?

    I have a need for hosts on separate VPN networks connected to my ASA corp to communicate among themselves.  Example: Host A site 1 a need to communicate with host B on the site 2.  Both sites 1 & 2 are connected via the VPN S2S.  I would get every site traffic to flow through the ASA at the other site.  Where should I start my configuration?  NAT? ACL?

    I can ping each host in the network Corp. but cannot ping from one site to the other.  I set up same-security-traffic permit intra-interface and addition of NAT and rules the ACL to allow/permit 1 Site to contact Site 2.  When I do a trace of package through Deputy Ministers DEPUTIES, packets are allowed to pass. I read different that tell no NAT y at - it something at the other end of the VPN to do?  should NAT and ACLs rules be mirrored? Just in case, a site is an instance of MS Azure VM and the other is a 3rd party VM instance.

    On the HubASA, can I set up a new card encryption that selects the Site1 Site2 traffic and protect the traffic and value her counterpart Site2 public IP or just add this selection of traffic to the existing encryption card for the existing tunnel between HubASA and Site2?

    Just add this traffic to the existing encryption card.

    Remember that this should be added on three routers (two hubs and there has been talk).

    Site1

    CRYPTO ip access list allow Site2 subnet >

    CRYPTO ip access list allow subnet training3 >

    CRYPTO ip access list allow subnet HUB >

    Site2

    CRYPTO ip access list allow Site1 subnet >

    CRYPTO ip access list allow subnet training3 >

    CRYPTO ip access list allow subnet HUB >

    Training3

    CRYPTO ip access list allow Site1 subnet >

    CRYPTO ip access list allow Site2 subnet >

    CRYPTO ip access list allow subnet HUB >

    HUB

    CRYPTO_1 ip access list allow Site1 subnet >

    CRYPTO_1 ip access list allow Site1 subnet >

    CRYPTO_1 ip access list allow Site1 subnet >

    CRYPTO_2 ip access list allow Site2 subnet >

    CRYPTO_2 ip access list allow Site2 subnet >

    CRYPTO_2 ip access list allow Site2 subnet >

    CRYPTO_3 ip access list allow subnet training3 >

    CRYPTO_3 ip access list allow subnet training3 >

    CRYPTO_3 ip access list allow subnet training3 >

    Each of these ACLs is attributed to their respective crypto cards.  CRYPTO_1 is assigned the site1 crypto map, CRYPTO_2 is assigned to the site2 crypto card... etc.

    I hope that's clear

    In addition to this, you need to configure identity NAT / NAT provides both the HUB and the spokes of sites.

    --

    Please do not forget to select a correct answer and rate useful posts

  • ASA 5510 &amp; ASA 5505 VPN

    I have an ASA 5510 in HQ (Version 8.0 (3)) and an ASA 5505 (8.3 (1)) Version at remote end.  I am using easy vpn.  The vpn works fine, but when the VPN is connected the 5510 shows 17 IPSEC connections to this one device.  I watch the 5505 and it says 1.

    Thank you!

    Yes, it will create SAs for each subnet you have an ITS twinning with the remote subnet ASA 5505 and one ITS twinning with the ip of the remote ASA 5505 peer.

    He created the pair of HIS extra with the IP peer of the ASA remote for easy vpn (it is normal in easy vpn). If you configure LAN-to-LAN between the ASAs 2, it will be just half of the SAs because there won't be ITS created for peers like in the easy vpn tunnel ip address.

    Here are the SAs created matching:

    local ident (addr, mask, prot, port): (64.196.6.165/255.255.255.255/0/0)
    Remote ident (addr, mask, prot, port): (64.196.6.180/255.255.255.255/0/0)

    local ident (addr, mask, prot, port): (172.30.20.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (64.196.6.180/255.255.255.255/0/0)

    local ident (addr, mask, prot, port): (172.30.20.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (192.168.101.0/255.255.255.0/0/0)

    local ident (addr, mask, prot, port): (172.30.30.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (192.168.101.0/255.255.255.0/0/0)

    local ident (addr, mask, prot, port): (172.30.30.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (64.196.6.180/255.255.255.255/0/0)

    local ident (addr, mask, prot, port): (172.30.70.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (192.168.101.0/255.255.255.0/0/0)

    local ident (addr, mask, prot, port): (172.30.70.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (64.196.6.180/255.255.255.255/0/0)

    local ident (addr, mask, prot, port): (172.30.71.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (64.196.6.180/255.255.255.255/0/0)

    local ident (addr, mask, prot, port): (172.30.71.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (192.168.101.0/255.255.255.0/0/0)

    local ident (addr, mask, prot, port): (172.30.80.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (64.196.6.180/255.255.255.255/0/0)

    local ident (addr, mask, prot, port): (172.30.80.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (192.168.101.0/255.255.255.0/0/0)

    local ident (addr, mask, prot, port): (172.30.81.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (192.168.101.0/255.255.255.0/0/0)

    local ident (addr, mask, prot, port): (172.30.81.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (64.196.6.180/255.255.255.255/0/0)

    local ident (addr, mask, prot, port): (172.30.88.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (64.196.6.180/255.255.255.255/0/0)

    local ident (addr, mask, prot, port): (172.30.88.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (192.168.101.0/255.255.255.0/0/0)

    local ident (addr, mask, prot, port): (192.168.1.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (192.168.101.0/255.255.255.0/0/0)

    local ident (addr, mask, prot, port): (192.168.1.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (64.196.6.180/255.255.255.255/0/0)

  • ASA 5505 and ASA 5510 Site to Site VPN Tunnel cannot be established

    Hi all experts

    We are now plan to form an IPSec VPN tunnel from site to site between ASA 5505 (ASA Version 8.4) and ASA 5510 (ASA Version 8.0) but failed, would you please show me how to establish? A reference guide?

    I got error syslog 713902 and 713903, how to fix?

    I got the following, when I type "sh crypto isakmp his."

    Type: user role: initiator

    Generate a new key: no State: MM_WAIT_MSG2

    Hugo

    Hello

    This State is reached when the policies of the phase 1 do not correspond to the two ends.

    Please confirm that you have the same settings of phase 1 on both sides with the following commands:

    See the isakmp crypto race

    See the race ikev1 crypto

    Also make sure that port UDP 500 and 4500 are open for communication between your device and the remote peer.

    Finally, make sure you have a route suitable for the remote VPN endpoint device.

    Hope that helps.

    Kind regards

    Dinesh Moudgil

  • ASA 5510 to Sonicwall TZ205 - ASA 9.1.6 upgrade breaks Tunnel VPN

    After reclassification of 8.4.5 to 9.1.6 my tunnel from site to site between an ASA 5510 and a Sonicwall TZ 205 is 'up' and I can ping the external interface of the other but I can't ping LAN to LAN.

    Hey Kevin,

    They should not be a difference on the config VPN between these versions, can you try to run a packet - trace on the SAA or place a screenshot inside while sending traffic.

    Example:

    entry Packet-trace within the icmp < src="" ip=""> 8 0

    Capture the vpn inside the match ip host host interface

    It may be useful

    -Randy-

  • Unable to connect to server vpn behind ASA 5510 with windows clients

    Hi all

    I've seen a number of posts on this and followed by a few documents of support on this issue, but I'm totally stuck now, nothing seems to work for me.

    This is the usual scenario, I have a VPN windows 2003 Server sat on the lan deprived of our ASA 5510 firewall, and I try to get my Windows XP / 7 laptop computers to connect to it.

    Within the ASDM:

    (1) Server Public created for Protocol 1723

    (2) Public created for the GRE protocol Server

    3) created two public servers have the same public and private addresses

    (4) the foregoing has created config Public Private static route in the section NAT firewall

    (5) rules to Firewall 2 also created above on the external interface for both 1723 and GRE

    When you try to connect, I get the following entry in the debug log.

    6 August 6, 2010 17:09:37 302013 195.74.141.2 1045 1723 ChamberVPN-internal built ride connection TCP 1889195 for outside:195.74.141.2/1045 (195.74.141.2/1045) to the inside: ChamberVPN-internal/1723 (XXX.XXX.XXX.XXX/1723)

    but nothing else.

    The server shows not attempting a connection so I think I'm missing something on the firewall now.

    Also inside interface there is a temporary rule:

    Source: no

    Destination: any

    Service: IP

    Action: enabled

    This should allow all outbound traffic only as far as I know...

    Any help would be greatly appreciated.

    Chris

    Hi Chris,

    ASA newspaper indicates that the connection is interrupted because of "syn timeout. This means that asa receives no response from the Windows Server. Right now, we need to clarify some points.

    1 - your vpn server committed a correct default gateway error or the path that lies in your fw interface asa.

    is 2 - possible to start capturing packets on Windows Server. Hereby, we can get data flow information beetween client and server. And we can be sure that Windows Server wonders vpn.

    Ufuk Güler

Maybe you are looking for