ASA 9.2 IPSEC VPN

Similar Questions

• The poll by IPSEC VPN SNMP

  Hi all

  I am trying to add remote Cisco switches to our Analyzer from Solarwinds network performance and I'm unable to see the community strings of switches behind our Firewall ASA across L2L IPSEC vpn tunnels.

  First of all, I can ping and see all the traffic behind the firewall.   Configuration manager (NCM) works fine, it can download and download configs of the remote switches.  It's just the SNMP which does not seem to talk.  Here are the lines of configuration of the remote switches:

  SNMP-server community * RO

  SNMP-server community * RW

  This configuration works fine on the other our network switches that are not accessible via a VPN tunnel.  Y at - it another line I need to add that pointing to the server from SolarWinds SNMP traffic?

  When I try to add the switch to Solarwinds, he sees the IP perfectly but once I added community strings RO and RW it performs a test fails every time and will not let me continue to add the device.

  Any help would be GREATLY appreciated!  Thank you!

  Matt

  Exit to Windows firewall and check the Antivirus on Solarwinds as well. This may be the origin of the problem (a working time or does not not once). Another possibility (can be), if you have all IPS inline and inspect traffic, this could cause the issue. Check to see if any program/device in the path is kinetically limiting ICMP/SNMP packets #of.

  What version of NPM?

  THX

  MS

• IPSec VPN to asa 5520

  Hello

  First I must admit that I am not very versed in Cisco equipment or in general IPSEC connections so my apologies if I'm doing something really good obviously stupid, but I checked through any kind of things that I could find on the internet on the configuration of IPSEC VPN.

  The setup I have is an asa 5520 (o/s 8.2) firewall which, for now, is connected to a temporary connection beautiful style home broadband for testing purposes. The netopia router is configured to allow ipsec passthrough and redirect 62515 UDP, TCP 10000, 4500 UDP, UDP 500 ports in the asa 5520.

  I'm trying to connein out of a laptop with disabled windows firewall and vpn cisco 5.0.02.0090 client version.

  I ran several attempts through the ipsec configuration wizard options. most of the time that nothing comes in the newspaper to show that a connection was attempted, but there is a way I can set up product options the following on the firewall log:

  4. Sep 24 2010 | 13: 54:29 | 713903 | Group = VPNtest9, IP = 86.44.x.x, error: cannot delete PeerTblEntry

  5: Sep 24 2010 | 13: 54:29 | 713902 | Group = VPNtest9, IP = 86.44.x.x, drop table homologous counterpart does not, no match!

  6. Sep 24 2010 | 13: 54:21 | 713905 | Group VPNtest9, IP = 86.44.x.x, P1 = relay msg sent to AM WSF

  3: Sep 24 2010 | 13: 54:21 | 713201 | Group = VPNtest9, IP = 86.44.x.x, double-Phase 1 detected package. Retransmit the last packet.

  6. Sep 24 2010 | 13: 54:16 | 713905 | Group VPNtest9, IP = 86.44.x.x, P1 = relay msg sent to AM WSF

  3: Sep 24 2010 | 13: 54:16 | 713201 | Group = VPNtest9, IP = 86.44.x.x, double-Phase 1 detected package. Retransmit the last packet.

  6. Sep 24 2010 | 13: 54:11 | 713905 | Group VPNtest9, IP = 86.44.x.x, P1 = relay msg sent to AM WSF

  3: Sep 24 2010 | 13: 54:11 | 713201 | Group = VPNtest9, IP = 86.44.x.x, double-Phase 1 detected package. Retransmit the last packet.

  3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1

  3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1

  3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1

  3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1

  3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1

  3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1

  3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1

  3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1

  3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1

  3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1

  6. Sep 24 2010 | 13: 54:06 | 302015 | 86.44.x.x | 51905 | 192.168.0.27 | 500 | Built UDP inbound connection 7487 for Internet:86.44.x.x/51905 (86.44.x.x/51905) at identity:192.168.0.27/500 (192.168.0.27/500)

  and this, in the journal of customer:

  Cisco Systems VPN Client Version 5.0.02.0090

  Copyright (C) 1998-2007 Cisco Systems, Inc.. All rights reserved.

  Customer type: Windows, Windows NT

  Running: 5.1.2600 Service Pack 3

  24 13:54:08.250 24/09/10 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  25 13:54:08.265 24/09/10 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  26 13:54:08.265 24/09/10 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "213.94.x.x".

  27 13:54:08.437 24/09/10 Sev = Info/6 IKE/0x6300003B

  Attempts to establish a connection with 213.94.x.x.

  28 13:54:08.437 24/09/10 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Frag), VID(Nat-T), VID (Unity)) at 213.94.x.x

  29 13:54:08.484 24/09/10 Sev = Info/4 IPSEC / 0 x 63700008

  IPSec driver started successfully

  30 13:54:08.484 24/09/10 Sev = Info/4 IPSEC / 0 x 63700014

  Remove all keys

  31 13:54:13.484 24/09/10 Sev = Info/4 IKE / 0 x 63000021

  Retransmit the last package!

  32 13:54:13.484 24/09/10 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK AG (Retransmission) to 213.94.x.x

  33 13:54:18.484 24/09/10 Sev = Info/4 IKE / 0 x 63000021

  Retransmit the last package!

  34 13:54:18.484 24/09/10 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK AG (Retransmission) to 213.94.x.x

  35 13:54:23.484 24/09/10 Sev = Info/4 IKE / 0 x 63000021

  Retransmit the last package!

  36 13:54:23.484 24/09/10 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK AG (Retransmission) to 213.94.x.x

  37 13:54:28.484 24/09/10 Sev = Info/4 IKE / 0 x 63000017

  Marking of IKE SA delete (I_Cookie = 36C50ACCE984B0B0 R_Cookie = 0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING

  38 13:54:28.984 24/09/10 Sev = Info/4 IKE/0x6300004B

  IKE negotiation to throw HIS (I_Cookie = 36C50ACCE984B0B0 R_Cookie = 0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING

  39 13:54:28.984 24/09/10 Sev = Info/4 CM / 0 x 63100014

  Could not establish the Phase 1 SA with the server '213.94.x.x' due to the 'DEL_REASON_PEER_NOT_RESPONDING '.

  40 13:54:28.984 24/09/10 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  41 13:54:28.984 24/09/10 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  42 13:54:28.984 24/09/10 Sev = Info/4 IKE / 0 x 63000001

  Signal received IKE to complete the VPN connection

  43 13:54:29.187 24/09/10 Sev = Info/4 IPSEC / 0 x 63700014

  Remove all keys

  44 13:54:29.187 24/09/10 Sev = Info/4 IPSEC / 0 x 63700014

  Remove all keys

  45 13:54:29.187 24/09/10 Sev = Info/4 IPSEC / 0 x 63700014

  Remove all keys

  46 13:54:29.187 24/09/10 Sev = Info/4 IPSEC/0x6370000A

  IPSec driver successfully stopped

  I have connectivity full http from the internet to a machine inside the asa 5520 so I think that the static routing and NAT'ing should be ok, but I am pleased to provide you with all the details.

  Can you see what I'm doing wrong?

  Thank you

  Sam

  Pls add the following policy:

  crypto ISAKMP policy 10

  preshared authentication

  the Encryption

  md5 hash

  Group 2

  You can also run debug on the ASA:

  debugging cry isa

  debugging ipsec cry

  and retrieve debug output after trying to connect.

• Cisco ASA 5515 two asa firewall ipsec vpn tunnel is not coming

  HelloW everyone.

  I configured ipsec vpn tunnel between Singapore and Malaysia with asa firewall.

  but the vpn does not come to the top. can someone tell me what can be the root cause?

  Here is the configuration of twa asa: (I changed the ip address all the)

  Singapore:

  See the race
  ASA 2.0000 Version 4
  !
  ASA5515-SSG520M hostname
  activate the encrypted password of PVSASRJovmamnVkD
  names of
  !
  interface GigabitEthernet0/0
  nameif inside
  security-level 100
  IP 192.168.15.4 255.255.255.0
  !
  interface GigabitEthernet0/1
  nameif DMZ
  security-level 50
  IP 192.168.5.3 255.255.255.0
  !
  interface GigabitEthernet0/2
  nameif outside
  security-level 0
  IP 160.83.172.8 255.255.255.224
  <--- more="" ---="">
                
  !
  <--- more="" ---="">
                
  interface GigabitEthernet0/3
  <--- more="" ---="">
                
  Shutdown
  <--- more="" ---="">
                
  No nameif
  <--- more="" ---="">
                
  no level of security
  <--- more="" ---="">
                
  no ip address
  !
  interface GigabitEthernet0/4
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/5
  nameif test
  security-level 100
  IP 192.168.168.219 255.255.255.0
  !
  interface Management0/0
  management only
  nameif management
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  connection of the banner ^ C please disconnect if you are unauthorized access ^ C
  connection of the banner please disconnect if you are unauthorized access
  boot system Disk0: / asa922-4-smp - k8.bin
  passive FTP mode
  network of the SG object
  <--- more="" ---="">
                
  192.168.15.0 subnet 255.255.255.0
  network of the MK object
  192.168.6.0 subnet 255.255.255.0
  service of the TCP_5938 object
  Service tcp destination eq 5938
  Team Viewer description
  service tcp_3306 object
  Service tcp destination eq 3306
  service tcp_465 object
  tcp destination eq 465 service
  service tcp_587 object
  Service tcp destination eq 587
  service tcp_995 object
  tcp destination eq 995 service
  service of the TCP_9000 object
  tcp destination eq 9000 service
  network of the Inside_host object
  Home 192.168.15.202
  service tcp_1111 object
  Service tcp destination eq 1111
  service tcp_7878 object
  Service tcp destination eq 7878
  service tcp_5060 object
  SIP, service tcp destination eq
  <--- more="" ---="">
                
  service tcp_5080 object
  Service tcp destination eq 5080
  network of the NETWORK_OBJ_192.168.15.0_24 object
  192.168.15.0 subnet 255.255.255.0
  inside_access_in list extended access allowed object SG ip everything
  OUTSIDE_IN list extended access permit tcp any newspaper EQ 9000 Inside_host object
  access extensive list ip 192.168.15.0 outside_cryptomap allow 255.255.255.0 object MK
  pager lines 24
  Enable logging
  timestamp of the record
  exploitation forest-size of the buffer of 30000
  debug logging in buffered memory
  recording of debug trap
  debugging in the history record
  asdm of logging of information
  host test 192.168.168.231 record
  host test 192.168.168.203 record
  Within 1500 MTU
  MTU 1500 DMZ
  Outside 1500 MTU
  test MTU 1500
  management of MTU 1500
  no failover
  <--- more="" ---="">
                
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 7221.bin
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  NAT (inside, outside) static source SG SG static destination MK MK non-proxy-arp-search to itinerary
  !
  network of the SG object
  NAT dynamic interface (indoor, outdoor)
  network of the Inside_host object
  NAT (inside, outside) interface static 9000 9000 tcp service
  inside_access_in access to the interface inside group
  Access-group OUTSIDE_IN in interface outside
  Route outside 0.0.0.0 0.0.0.0 160.83.172.x 1
  Route inside 10.0.1.0 255.255.255.0 192.168.15.199 1
  Route inside 10.0.2.0 255.255.255.0 192.168.15.199 1
  Route inside 10.0.11.0 255.255.255.0 192.168.15.199 1
  Route inside 10.1.0.0 255.255.0.0 192.168.15.199 1
  Route inside 10.8.0.0 255.255.0.0 192.168.15.199 1
  Route inside 10.104.0.0 255.255.0.0 192.168.15.199 1
  Route inside 192.168.8.0 255.255.255.0 192.168.15.199 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  <--- more="" ---="">
                
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  identity of the user by default-domain LOCAL
  the ssh LOCAL console AAA authentication
  Enable http server

  Community trap SNMP-server host test 192.168.168.231 *.
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps syslog
  Crypto ipsec transform-set ikev1 VPN-TRANSFORM esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
  <--- more="" ---="">
                
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
  <--- more="" ---="">
                
  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
  Crypto ipsec pmtu aging infinite - the security association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  crypto CRYPTO - map 2 map corresponds to the address outside_cryptomap
  card crypto CRYPTO-map 2 set peer 103.246.3.54
  card crypto CRYPTO-map 2 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  card crypto CRYPTO-map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  CRYPTO-card interface card crypto outside
  trustpool crypto ca policy
  Crypto ikev1 allow outside
  IKEv1 crypto policy 10
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  life 86400

  Console timeout 0
  management of 192.168.1.2 - dhcpd address 192.168.1.254
  enable dhcpd management
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  SSL encryption rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1
  internal GroupPolicy1 group strategy
  attributes of Group Policy GroupPolicy1
  Ikev1 VPN-tunnel-Protocol
  username, password admin eY/fQXw7Ure8Qrz7 encrypted privilege 15
  username gmsadmin password HS/VyK0jtJ/PANQT encrypted privilege 15
  tunnel-group 143.216.30.7 type ipsec-l2l
  tunnel-group 143.216.30.7 General-attributes
  Group Policy - by default-GroupPolicy1
  <--- more="" ---="">
                
  IPSec-attributes tunnel-group 143.216.30.7
  IKEv1 pre-shared-key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  Overall description
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  <--- more="" ---="">
                
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:ccce9a600b491c8db30143590825c01d
  : end

  Malaysia:

  :
  ASA 2.0000 Version 4
  !
  hostname ASA5515-SSG5-MK
  activate the encrypted password of PVSASRJovmamnVkD
  names of
  !
  interface GigabitEthernet0/0
  nameif inside
  security-level 100
  IP 192.168.6.70 255.255.255.0
  !
  interface GigabitEthernet0/1
  nameif DMZ
  security-level 50
  IP 192.168.12.2 255.255.255.0
  !
  interface GigabitEthernet0/2
  nameif outside
  security-level 0
  IP 143.216.30.7 255.255.255.248
  <--- more="" ---="">
                
  !
  interface GigabitEthernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/4
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/5
  nameif test
  security-level 100
  IP 192.168.168.218 255.255.255.0
  !
  interface Management0/0
  management only
  nameif management
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  <--- more="" ---="">
                
  Interface Port - Channel 1
  No nameif
  no level of security
  IP 1.1.1.1 255.255.255.0
  !
  boot system Disk0: / asa922-4-smp - k8.bin
  passive FTP mode
  clock timezone GMT + 8 8
  network of the SG object
  192.168.15.0 subnet 255.255.255.0
  network of the MK object
  192.168.6.0 subnet 255.255.255.0
  service of the TCP_5938 object
  Service tcp destination eq 5938
  Team Viewer description
  service tcp_3306 object
  Service tcp destination eq 3306
  service tcp_465 object
  tcp destination eq 465 service
  service tcp_587 object
  Service tcp destination eq 587
  service tcp_995 object
  tcp destination eq 995 service
  service of the TCP_9000 object
  <--- more="" ---="">
                
  tcp destination eq 9000 service
  network of the Inside_host object
  Home 192.168.6.23
  service tcp_1111 object
  Service tcp destination eq 1111
  service tcp_7878 object
  Service tcp destination eq 7878
  service tcp_5060 object
  SIP, service tcp destination eq
  service tcp_5080 object
  Service tcp destination eq 5080
  network of the NETWORK_OBJ_192.168.2.0_24 object
  192.168.6.0 subnet 255.255.255.0
  inside_access_in list extended access allowed object SG ip everything
  VPN-INTERESTING-TRAFFIC extended access list permit ip object MK SG
  OUTSIDE_IN list extended access permit tcp any newspaper EQ 9000 Inside_host object
  outside_cryptomap to access extended list ip 192.168.6.0 allow 255.255.255.0 object SG
  pager lines 24
  Enable logging
  timestamp of the record
  exploitation forest-size of the buffer of 30000
  debug logging in buffered memory
  recording of debug trap
  asdm of logging of information
  <--- more="" ---="">
                
  host test 192.168.168.231 record
  host test 192.168.168.203 record
  Within 1500 MTU
  MTU 1500 DMZ
  Outside 1500 MTU
  test MTU 1500
  management of MTU 1500
  reverse IP check management interface path
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 7221.bin
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  NAT (inside, outside) static source MK MK static destination SG SG route no-proxy-arp-search
  NAT (inside, outside) static source NETWORK_OBJ_192.168.2.0_24 NETWORK_OBJ_192.168.2.0_24 static destination SG SG route no-proxy-arp-search
  !
  network of the MK object
  NAT dynamic interface (indoor, outdoor)
  network of the Inside_host object
  NAT (inside, outside) interface static 9000 9000 tcp service
  inside_access_in access to the interface inside group
  Access-group OUTSIDE_IN in interface outside
  Route outside 0.0.0.0 0.0.0.0 143.216.30.x 1
  <--- more="" ---="">
                
  Route inside 10.2.0.0 255.255.0.0 192.168.6.200 1
  Route inside 10.6.0.0 255.255.0.0 192.168.6.200 1
  Route inside 192.168.254.0 255.255.255.0 192.168.6.200 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  identity of the user by default-domain LOCAL
  AAA authentication http LOCAL console
  the ssh LOCAL console AAA authentication
  Enable http server

  No snmp server location
  No snmp Server contact
  Crypto ipsec transform-set ikev1 VPN-TRANSFORM esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
  <--- more="" ---="">
                
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
  <--- more="" ---="">
                
  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
  Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
  Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
  Crypto ipsec pmtu aging infinite - the security association
  crypto CRYPTO - map 2 map corresponds to the address outside_cryptomap
  card crypto CRYPTO-map 2 set peer 160.83.172.8
  card crypto CRYPTO-map 2 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  CRYPTO-card interface card crypto outside
  trustpool crypto ca policy
  Crypto ikev1 allow outside
  IKEv1 crypto policy 10
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  SSH timeout 60
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0
  management of 192.168.1.2 - dhcpd address 192.168.1.254
  enable dhcpd management
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  SSL encryption rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1
  attributes of Group Policy DfltGrpPolicy
  Ikev1 VPN-tunnel-Protocol l2tp ipsec without ssl-client
  internal GroupPolicy1 group strategy
  attributes of Group Policy GroupPolicy1
  Ikev1 VPN-tunnel-Protocol
  username, password admin eY/fQXw7Ure8Qrz7 encrypted privilege 15
  username gmsadmin password HS/VyK0jtJ/PANQT encrypted privilege 15
  <--- more="" ---="">
                
  tunnel-group MK SG type ipsec-l2l
  IPSec-attributes tunnel-group MK-to-SG
  IKEv1 pre-shared-key *.
  tunnel-group 160.83.172.8 type ipsec-l2l
  tunnel-group 160.83.172.8 General-attributes
  Group Policy - by default-GroupPolicy1
  IPSec-attributes tunnel-group 160.83.172.8
  IKEv1 pre-shared-key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  <--- more="" ---="">
                
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e
  : end

  Good news, that VPN has been implemented!

  According to the ping problem, my suggestion is to check, if some type of firewall based on host computers on both sides block ICMP requests.

  Anyway, you can still use the capture of packets on the inside of the interfaces of the two ASAs, to check if the ICMP traffic is to reach the ASA.

  In addition, you can try to enable ICMP inspection:

  Policy-map global_policy
  class inspection_default

  inspect the icmp

  inspect the icmp error

• Problem with IPsec VPN between ASA and router Cisco - ping is not response

  Hello

  I don't know because the IPsec VPN does not work. This is my setup (IPsec VPN between ASA and R2):

  my network topology data:

  LAN 1 connect ASA - 1 (inside the LAN)

  PC - 10.0.1.3 255.255.255.0 10.0.1.1

  ASA - GigabitEthernet 1: 10.0.1.1 255.255.255.0

  -----------------------------------------------------------------

  ASA - 1 Connect (LAN outide) R1

  ASA - GigabitEthernet 0: 172.30.1.2 255.255.255.252

  R1 - FastEthernet 0/0: 172.30.1.1 255.255.255.252

  ---------------------------------------------------------------------

  R1 R2 to connect

  R1 - FastEthernet 0/1: 172.30.2.1 255.255.255.252

  R2 - FastEthernet 0/1: 172.30.2.2 255.255.255.252

  R2 for lan connection 2

  --------------------------------------------------------------------

  R2 to connect LAN2

  R2 - FastEthernet 0/0: 10.0.2.1 255.255.255.0

  PC - 10.0.2.3 255.255.255.0 10.0.2.1

  ASA configuration:

  1 GigabitEthernet interface
  nameif inside
  security-level 100
  IP 10.0.1.1 255.255.255.0
  no downtime
  interface GigabitEthernet 0
  nameif outside
  security-level 0
  IP 172.30.1.2 255.255.255.252
  no downtime
  Route outside 0.0.0.0 0.0.0.0 172.30.1.1

  ------------------------------------------------------------

  access-list scope LAN1 to LAN2 ip 10.0.1.0 allow 255.255.255.0 10.0.2.0 255.255.255.0
  object obj LAN
  subnet 10.0.1.0 255.255.255.0
  object obj remote network
  10.0.2.0 subnet 255.255.255.0
  NAT (inside, outside) 1 static source obj-local obj-local destination obj-remote control remote obj non-proxy-arp static

  -----------------------------------------------------------
  IKEv1 crypto policy 10
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 3600
  Crypto ikev1 allow outside
  crypto isakmp identity address

  ------------------------------------------------------------
  tunnel-group 172.30.2.2 type ipsec-l2l
  tunnel-group 172.30.2.2 ipsec-attributes
  IKEv1 pre-shared-key cisco123
  Crypto ipsec transform-set esp-aes-192 ASA1TS, esp-sha-hmac ikev1

  -------------------------------------------------------------
  card crypto ASA1VPN 10 is the LAN1 to LAN2 address
  card crypto ASA1VPN 10 set peer 172.30.2.2
  card crypto ASA1VPN 10 set transform-set ASA1TS ikev1
  card crypto ASA1VPN set 10 security-association life seconds 3600
  ASA1VPN interface card crypto outside

  R2 configuration:

  interface fastEthernet 0/0
  IP 10.0.2.1 255.255.255.0
  no downtime
  interface fastEthernet 0/1
  IP 172.30.2.2 255.255.255.252
  no downtime

  -----------------------------------------------------

  router RIP
  version 2
  Network 10.0.2.0
  network 172.30.2.0

  ------------------------------------------------------
  access-list 102 permit ahp 172.30.1.2 host 172.30.2.2
  access-list 102 permit esp 172.30.1.2 host 172.30.2.2
  access-list 102 permit udp host 172.30.1.2 host 172.30.2.2 eq isakmp
  interface fastEthernet 0/1
  IP access-group 102 to

  ------------------------------------------------------
  crypto ISAKMP policy 110
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 42300

  ------------------------------------------------------
  ISAKMP crypto key cisco123 address 172.30.1.2

  -----------------------------------------------------
  Crypto ipsec transform-set esp - aes 128 R2TS

  ------------------------------------------------------

  access-list 101 permit tcp 10.0.2.0 0.0.0.255 10.0.1.0 0.0.0.255

  ------------------------------------------------------

  R2VPN 10 ipsec-isakmp crypto map
  match address 101
  defined by peer 172.30.1.2
  PFS Group1 Set
  R2TS transformation game
  86400 seconds, life of security association set
  interface fastEthernet 0/1
  card crypto R2VPN

  I don't know what the problem

  Thank you

  If the RIP is not absolutely necessary for you, try adding the default route to R2:

  IP route 0.0.0.0 0.0.0.0 172.16.2.1

  If you want to use RIP much, add permissions ACL 102:

  access-list 102 permit udp any any eq 520

• ASA 5505 - I can't create an IPSEC VPN between two ASA 5505

  Hello

  I have two ASA 5505 with basic license and I'm trying to create a VPN IPSEC using the CLI. Here are the steps I did:

  1 Configure ASA-1 (host name, vlan 1 and vlan 2).

  2. configure a static route

  3. create object network (local and remote)

  4. create the access list

  5. create ikev1 crypto

  6. create tunnel-group

  7 Configure nat

  and I repeat the steps above with the ASA but another change IP.

  Are to correct the above steps?

  Why can I not create an IPSEC VPN between devices?.

  No, you needn't. The ASA configuration is ok. Packet trace proved it. I think it can be a problem on the hosts. Please, check the firewall on the PC and try to put out of service, if it is running.

• Microsoft l2tp IPSec VPN site to site ASA on top

  I have a specialized applications casino that requires end-to-end encryption. I'm under the stack of Microsoft IPSec l2tp between my XP machine and my Windows 2003 server on the LAN. Can I use the same type of protocol stack Microsoft l2tp IPSec between my XP machine and the Windows Server 2003 a branch on the SAA to site to site ASA VPN tunnel? The VPN site-to site ASA is a type of key Preshare IPSec VPN tunnelle traffic between our head office and a branch in distance.

  In other words, the ASA site-to-site IPSec VPN will allow Microsoft l2tp through IPSec encrypted traffic? My ACL tunnel would allow full IP access between site. Something like:

  name 192.168.100.0 TexasSubnet

  name 192.168.200.0 RenoSubnet

  IP TexasSubnet 255.255.255.0 RenoSubnet 255.255.255.0 allow Access-list extended nat_zero

  Hello

  Yes, the L2TP can be encapsulated in IPSEC as all other traffic.

  However, make sure that no NAT is performed on each end. L2TP is a default header protection which will see NAT as a falsification of package and reject it.

  See you soon,.

  Daniel

• ASA Cisco IPSEC VPN tunnel has not managed the traffic

  Hi guys

  I am trying to set up a new connection IPSEC VPN between a Cisco ASA 5520 (verion 8.4 (4)) and Checkpoint Firewall. I managed to establish the phases IKE and IPSEC and I can see the tunnel is UP. But I can't see any traffic through the tunnel. I checked the cryptomap both ends and try to test with a contionuous ping from within the network of the SAA.

  I made a screenshot of ICMP packets but cannot see in ASA. I welcomed the icmp inside ASA interface.

  I did a package tracer and it ends with a fall of vpn - filter the packets. But can not see any configured filters...

  Your help is very appreciated...

  Thank you

  You probably need to add nat negate statements:-something like.

  object-group network OBJ-LOCAL
  Network 10.155.176.0 255.255.255.0
  object-group network OBJ / remote
  object-network 192.168.101.0 255.255.255.0
  NAT static OBJ-LOCALOBJ-LOCAL source destination (indoor, outdoor) static OBJ-REMOTE OBJ-REMOTE-no-proxy-arp

  You are running 8.4 nat 0 has been amortized

• IPSec vpn cisco asa and acs 5.1

  We have configured authentication ipsec vpn cisco asa acs 5.1:

  Here is the config in cisco vpn 5580:

  standard access list acltest allow 10.10.30.0 255.255.255.0

  RADIUS protocol AAA-server Gserver

  AAA-server host 10.1.8.10 Gserver (inside)

  Cisco key

  AAA-server host 10.1.8.11 Gserver (inside)

  Cisco key

  internal group gpTest strategy

  gpTest group policy attributes

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list acltest

  type tunnel-group test remote access

  tunnel-group test general attributes

  address localpool pool

  Group Policy - by default-gpTest

  authentication-server-group LOCAL Gserver

  authorization-server-group Gserver

  accounting-server-group Gserver

  IPSec-attributes of tunnel-group test

  pre-shared-key cisco123

  GBA, we config user group: VPN users. all VPN users in this group. ACS can visit his political profile: If the user in the 'VPN users' group, access ACS.

  When we connect from a VPN Client to the server, all users connect to success. When you see the parser in ACS journal, each user success connect also get

  error:

  22040 wrong password or invalid shared secret

  (pls see picture to attach it)

  the system still works, but I don't know why, we get the error log.

  Thanks for any help you can provide!

  Duyen

  Hello Duyen,

  I think I've narrowed the issue. When remote access VPN using RADIUS authentication we must keep in mind that authentication and authorization are included on the same package.

  Depending on your configuration, the ACS is defined as a server RADIUS (Gserver Protocol radius aaa server) and becomes the VPN Tunnel authenticated and 'authorized' on this server group:

  authentication-server-group LOCAL Gserver

  authorization-server-group Gserver

  As noted above, the RADIUS of request/response includes authentication and authorization on the same package. This seems to be a problem of incorrect configuration that we should not set up the 'permission' in the Tunnel of the group.

  Please remove the authorization under the Tunnel of Group:

  No authorization-server-group Gserver

  Please test the connection again and check the logs of the ACS. At this point there are only sucessful newspaper reported on the side of the ACS.

  Is 'Permission-server-group' LDAP permission when authenticating to a LDAP server so to retrieve the attributes of permission on the server. RAY doesn't have the command as explained above.

  I hope this helps.

  Kind regards.

• Private of IPSec VPN-private network between ASA and router

  Hello community,

  This is first time for me to configure IPSec VPN between ASA and router. I have an ASA 5540 at Headquarters and 877 router to EH Branch

  Headquarters ASA summary.

  Peer IP: 111.111.111.111

  Local network: 10.0.0.0

  Branch

  Peer IP: 123.123.123.123

  LAN: 192.168.1.0/24

  Please can someone help me set up the vpn.

  Hello

  This guide covers exactly what you need:

  Establishment of ASDM and SDM - http://www.netcraftsmen.net/resources/archived-articles/273.html

  Tunnel VPN - ASA to the router configuration:

  http://www.Cisco.com/en/us/products/ps5855/products_configuration_example09186a0080a9a7a3.shtml#ASDM

  Kind regards

  Jimmy

• ASA IPSEC VPN with public IP dynamic

  Hey,.

  I have never deployed IPSEC VPN tunnel using ASA on two sides of a side using public IP dynamic production. I normally deploy VPN Tunnels with both sides using public static IP addresses (not always a public IP address on ASA directly however).

  So I wonder how stable it works with a static public IP and the other side uses dynamic public IP?

  Thank you

  Shuai

  If you use certificates and psk or main mode and aggressive it will work very well. I have a number of production sites using this method.

  Sent by Cisco Support technique iPad App

• ASA 5505 IPSEC VPN connected but cannot access the local network

  ASA: 8.2.5

  ASDM: 6.4.5

  LAN: 10.1.0.0/22

  Pool VPN: 172.16.10.0/24

  Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.

  I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.

  Here is my setup, wrong set up anything?

  ASA Version 8.2 (5)

  !

  hostname asatest

  domain XXX.com

  activate 8Fw1QFqthX2n4uD3 encrypted password

  g9NiG6oUPjkYrHNt encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 10.1.1.253 255.255.252.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  address IP XXX.XXX.XXX.XXX 255.255.255.240

  !

  passive FTP mode

  clock timezone PST - 8

  clock summer-time recurring PDT

  DNS server-group DefaultDNS

  domain vff.com

  vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0

  access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0

  pager lines 24

  Enable logging

  timestamp of the record

  logging trap warnings

  asdm of logging of information

  logging - the id of the device hostname

  host of logging inside the 10.1.1.230

  Within 1500 MTU

  Outside 1500 MTU

  IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  AAA-server protocol nt AD

  AAA-server host 10.1.1.108 AD (inside)

  NT-auth-domain controller 10.1.1.108

  Enable http server

  http 10.1.0.0 255.255.252.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 10.1.0.0 255.255.252.0 inside

  SSH timeout 20

  Console timeout 0

  dhcpd outside auto_config

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal group vpntest strategy

  Group vpntest policy attributes

  value of 10.1.1.108 WINS server

  Server DNS 10.1.1.108 value

  Protocol-tunnel-VPN IPSec l2tp ipsec

  disable the password-storage

  disable the IP-comp

  Re-xauth disable

  disable the PFS

  IPSec-udp disable

  IPSec-udp-port 10000

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list vpntest_splitTunnelAcl

  value by default-domain XXX.com

  disable the split-tunnel-all dns

  Dungeon-client-config backup servers

  the address value vpnpool pools

  admin WeiepwREwT66BhE9 encrypted privilege 15 password username

  username user5 encrypted password privilege 5 yIWniWfceAUz1sUb

  the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username

  tunnel-group vpntest type remote access

  tunnel-group vpntest General attributes

  address vpnpool pool

  authentication-server-group AD

  authentication-server-group (inside) AD

  Group Policy - by default-vpntest

  band-Kingdom

  vpntest group tunnel ipsec-attributes

  pre-shared-key BEKey123456

  NOCHECK Peer-id-validate

  !

  !

  privilege level 3 mode exec cmd command perfmon

  privilege level 3 mode exec cmd ping command

  mode privileged exec command cmd level 3

  logging of the privilege level 3 mode exec cmd commands

  privilege level 3 exec command failover mode cmd

  privilege level 3 mode exec command packet cmd - draw

  privilege show import at the level 5 exec mode command

  privilege level 5 see fashion exec running-config command

  order of privilege show level 3 exec mode reload

  privilege level 3 exec mode control fashion show

  privilege see the level 3 exec firewall command mode

  privilege see the level 3 exec mode command ASP.

  processor mode privileged exec command to see the level 3

  privilege command shell see the level 3 exec mode

  privilege show level 3 exec command clock mode

  privilege exec mode level 3 dns-hosts command show

  privilege see the level 3 exec command access-list mode

  logging of orders privilege see the level 3 exec mode

  privilege, level 3 see the exec command mode vlan

  privilege show level 3 exec command ip mode

  privilege, level 3 see fashion exec command ipv6

  privilege, level 3 see the exec command failover mode

  privilege, level 3 see fashion exec command asdm

  exec mode privilege see the level 3 command arp

  command routing privilege see the level 3 exec mode

  privilege, level 3 see fashion exec command ospf

  privilege, level 3 see the exec command in aaa-server mode

  AAA mode privileged exec command to see the level 3

  privilege, level 3 see fashion exec command eigrp

  privilege see the level 3 exec mode command crypto

  privilege, level 3 see fashion exec command vpn-sessiondb

  privilege level 3 exec mode command ssh show

  privilege, level 3 see fashion exec command dhcpd

  privilege, level 3 see the vpnclient command exec mode

  privilege, level 3 see fashion exec command vpn

  privilege level see the 3 blocks from exec mode command

  privilege, level 3 see fashion exec command wccp

  privilege see the level 3 exec command mode dynamic filters

  privilege, level 3 see the exec command in webvpn mode

  privilege control module see the level 3 exec mode

  privilege, level 3 see fashion exec command uauth

  privilege see the level 3 exec command compression mode

  level 3 for the show privilege mode configure the command interface

  level 3 for the show privilege mode set clock command

  level 3 for the show privilege mode configure the access-list command

  level 3 for the show privilege mode set up the registration of the order

  level 3 for the show privilege mode configure ip command

  level 3 for the show privilege mode configure command failover

  level 5 mode see the privilege set up command asdm

  level 3 for the show privilege mode configure arp command

  level 3 for the show privilege mode configure the command routing

  level 3 for the show privilege mode configure aaa-order server

  level mode 3 privilege see the command configure aaa

  level 3 for the show privilege mode configure command crypto

  level 3 for the show privilege mode configure ssh command

  level 3 for the show privilege mode configure command dhcpd

  level 5 mode see the privilege set privilege to command

  privilege level clear 3 mode exec command dns host

  logging of the privilege clear level 3 exec mode commands

  clear level 3 arp command mode privileged exec

  AAA-server of privilege clear level 3 exec mode command

  privilege clear level 3 exec mode command crypto

  privilege clear level 3 exec command mode dynamic filters

  level 3 for the privilege cmd mode configure command failover

  clear level 3 privilege mode set the logging of command

  privilege mode clear level 3 Configure arp command

  clear level 3 privilege mode configure command crypto

  clear level 3 privilege mode configure aaa-order server

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4

  : end

  Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.

  The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.

  On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.

• Install two the separate IPSec VPNS on ASA 5505

  Hello

  I'll have set up a second tunnel IPSec VPN on my Cisco ASA 5505 to another office.  I was able to configure one without problem through the ASDM, but were not able to get the second.

  The IPSec tunnel connects to a WRVS4400N router to the other office.  I tried the debug crypto isakmp and ipsec crypto, but I get nothing.  Here is the config.  Something seems wrong on my end?   I've also attached a screenshot of the configuration settings on the remote router.

  Output of the command: "show run".

  : Saved
  :
  ASA Version 8.2 (5)
  !
  hostname WayneASA

  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 70.91.18.205 255.255.255.252
  !
  interface Vlan5
  Shutdown
  No nameif
  security-level 50
  IP 192.168.10.1 255.255.255.0
  !
  passive FTP mode
  clock timezone IS - 5
  clock to summer time EDT recurring
  DNS lookup field inside
  DNS domain-lookup outside
  DNS server-group DefaultDNS
  75.75.75.75 server name
  75.75.76.76 server name
  domain 3gtms.com
  object-group Protocol TCPUDP
  object-protocol udp
  object-tcp protocol
  inside_access_in of access allowed any ip an extended list
  IPSec_Access to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
  inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.224
  inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
  inside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
  TunnelSplit1 list standard access allowed 192.168.10.0 255.255.255.224
  TunnelSplit1 list standard access allowed 192.168.1.0 255.255.255.0
  outside_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
  outside_2_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
  outside_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.5.0 255.255.255.0
  RemoteTunnel_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
  RemoteTunnel_splitTunnelAcl_1 list standard access allowed 192.168.1.0 255.255.255.0

  pager lines 24
  Enable logging
  Within 1500 MTU
  Outside 1500 MTU
  IP mask 255.255.255.224 local pool VPNPool 192.168.10.1 - 192.168.10.30
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0
  NAT (inside) 1 0.0.0.0 0.0.0.0

  inside_access_in access to the interface inside group
  Access-group out_access_in in interface outside
  Route outside 0.0.0.0 0.0.0.0 70.91.18.206 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  Enable http server
  http 0.0.0.0 0.0.0.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set esp-3des esp-md5-hmac VPNTransformSet
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  card crypto IPSec_map 1 corresponds to the address IPSec_Access
  card crypto IPSec_map 1 set peer 50.199.234.229
  card crypto IPSec_map 1 the transform-set VPNTransformSet value
  card crypto IPSec_map 2 corresponds to the address outside_2_cryptomap
  card crypto IPSec_map 2 set pfs Group1
  card crypto IPSec_map 2 set peer 98.101.139.210
  card crypto IPSec_map 2 the transform-set VPNTransformSet value
  card crypto IPSec_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  IPSec_map interface card crypto outside
  card crypto outside_map 1 match address outside_1_cryptomap
  peer set card crypto outside_map 1 50.199.234.229

  crypto ISAKMP allow outside
  crypto ISAKMP policy 1
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 43200
  Telnet 192.168.1.0 255.255.255.0 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 inside
  SSH timeout 60
  Console timeout 0
  management-access inside
  dhcpd outside auto_config
  !
  dhcpd address 192.168.1.100 - 192.168.1.199 inside
  dhcpd dns 75.75.75.75 75.75.76.76 interface inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  internal RemoteTunnel group strategy
  attributes of Group Policy RemoteTunnel
  value of server DNS 75.75.75.75 75.75.76.76
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list RemoteTunnel_splitTunnelAcl_1
  3gtms.com value by default-field
  eric 0vcSd5J/TLsFy7nU password user name encrypted privilege 15
  username password encrypted URsSXKLozQMSeCBk privilege 5 lestofts
  username lestofts attributes
  type of remote access service
  algobel lBWy5eNbHMCDPzuL encrypted password username
  username algobel attributes
  type of remote access service
  type tunnel-group RemoteTunnel remote access
  attributes global-tunnel-group RemoteTunnel
  address pool VPNPool
  Group Policy - by default-RemoteTunnel
  IPSec-attributes tunnel-group RemoteTunnel
  pre-shared key *.
  tunnel-group 50.199.234.229 type ipsec-l2l
  IPSec-attributes tunnel-group 50.199.234.229
  pre-shared key *.
  tunnel-group 98.101.139.210 type ipsec-l2l
  IPSec-attributes tunnel-group 98.101.139.210
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the icmp
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the dns
  inspect the pptp
  inspect the sip
  !
  global service-policy global_policy
  context of prompt hostname
  anonymous reporting remote call
  Cryptochecksum:a86adc4b23977672679b6fb72d0bc187
  : end

  You are also missing the NAT0 rule

  inside_nat0 to access extended list ip 192.168.2.0 allow 255.255.255.0 192.168.5.0 255.255.255.0

  -Jouni

• Cisco ASA 5510, ipsec vpn. What address to connect the client to

  Hello

  It's maybe a stupid question, but I can't find the answer anywhere.

  I used the ipsec vpn configuration wizard, I activated the external interface to access ipsec and went through SCW pools of addresses etc. When I try to connect with the cisco vpn client to my address of the external interface (of a remote host) I'm unable to connect. I scanned the interface for open ports, but there is not, I have to allow traffic to ipsec at this interface?

  Best regards

  Andreas

  No, once you have configured the access remote vpn ipsec, it will be automatically activated, and you should be able to connect to the ASA outside the ip address of the interface.

  Can you please share the configuration? and also which group name you are trying to access the vpn client?

• Easy VPN with IPSec VPN L2L (Site - to - Site) in the same ASA 5505

  Hi Experts,

  We have an ASA 5505 in our environment, and currently two IPSec VPN L2L tunnels are established. But we intend to connect with VPN (Network Extension Mode) easy to another site as a customer. Is it possible to configure easy VPN configurations by keeping the currently active IPSec L2L VPN(Site-to-Site) tunnels? If not possible is there any work around?

  Here's the warning we get then tried to configure the easy VPN Client.

  NOCMEFW1 (config) # vpnclient enable

  * Delete "nat (inside) 0 S2S - VPN"

  * Detach crypto card attached to the outside interface

  * Remove the tunnel groups defined by the user

  * Remove the manual configuration of ISA policies

  CONFLICT of CONFIG: Configuration that would prevent the Cisco Easy VPN Remo success

  you

  operation was detected and listed above. Please solve the

  above a configuration and re - activate.

  Thanks and greetings

  ANUP sisi

  "Dynamic crypto map must be installed on the server device.

  Yes, dynamic crypto is configured on the EasyVPN server.

  Thank you