Easy VPN with IPSec VPN L2L (Site - to - Site) in the same ASA 5505

Similar Questions

• Several VPN site to site on the same ASA

  I need to set up an IPSEC tunnel to allow a provider to the remote site printing to a printer on my network.  I intend to use an ASA 5520 to do this.  The architecture is fairly simple:

  [Remote]-[Remote FW] --[FW Local]-[Local routing]-[printer]

  The downside is that there is finally more than a seller who needs to do.  Each will have a different destination but mena there will be more than a VPN to ASA at my end.  It seems that the ASA 5520 can be supported more than a VPN site to site, but I need to assign an IP address for different endpoint in each tunnel?

  I searched and found no a design guide for the VPN site - to-many.  If so, I'd appreciate a pointer.

  --

  Stephen

  You can do several tunnels VPN site to site.  As a general rule, you would have a card encryption applied to the interface in the face of internet.  Each crypto map entry has a sequence number. You simply have to create all the necessary configurations (tunnel-group for the remote peer IP, ACL to set interesting traffic, etc.) and increment the entry card crypto.

   Example: crypto map outside_map 1 match address s2s-VPN-1 crypto map outside_map 1 set pfs crypto map outside_map 1 set peer 1.2.3.4 crypto map outside_map 1 set transform-set ESP-3DES-SHA tunnel-group 1.2.3.4 type ipsec-l2l tunnel-group 1.2.3.4 ipsec-attributes  ikev1 pre-shared-key SomeSecureKey$ crypto map outside_map 2 match address s2s-VPN-2 crypto map outside_map 2 set pfs crypto map outside_map 2 set peer 4.5.6.7 crypto map outside_map 2 set transform-set ESP-3DES-SHA tunnel-group 4.5.6.7 type ipsec-l2l tunnel-group 4.5.6.7 ipsec-attributes ikev1 pre-shared-key SomeSecureKey2$

• Hi, is there an easy way to copy an entire site from the desktop to the version of the tablet version?

  Hi, is there an easy way to copy an entire site from the desktop to the version of the tablet version?

  It is not possible to duplicate content en masse. You can copy the page structure, backgrounds, and metadata when you initially create mobile sites. The content should be created from the ground up; Although you can copy and paste (or drag and drop) Office-Tablet pages page and rework. You can also use the content panel to create a synchronized text - the scale of the site, which will save you a lot of time.

  David

• I can access both sites at the same time?

  Dreamweaver has the possibility to open two websites at the same time?

  Basically I have a CMS that is hosted on a server, which connects to my customer sites on other servers. I want to be able to open files on a server and change and also to edit files on a different server at the same time.

  If it is not available in Dreamweaver, then I think it should be. I often need to copy the code to a page in a site to another page to different site. For the ability to have two windows open, each connected to a site server different Web would be valuable to me. By having separate windows, each can have its own connection to the server. I don't know how that would be easy, but I like it!

  See you soon

  Glynn

  You can only connect to a single site at the same time.  And you need to change the files locally, save & then upload to the remote server.   As far as I KNOW, no unique FTP application is capable to connect to multiple servers at once.  You might be able to do what you want with open DW and some additional 3rd client like Filezilla FTP, every time you connect to different servers.

  Nancy O.

• Multiple sites using the same instance of CF?

  Hi Gang-
  I have a client who has recently improved CF Pro to Enterprise and they use in a relatively simple way as an intranet. They would like to help me configure a second instance for the purpose of a staging server, but I noticed after they revealed they do not have the link of Enterprise Manager in their CF Admin screen.
  
  They need to reinstall CF using the MultiServer installation version to be able to deploy a second instance of CF? Need to uninstall and reinstall? Ugh...
  
  Can't they just create a second site under their web server, using a different port and you worry about the second instance of CF? Best practices for a moment, remember, they do not necessarily expand on this server, it is intended to be a staging server.
  
  Any ideas on the best and fastest way to handle this?
  
  Many thanks in advance,
  Rich

  Many questions, many answers. :-)

  Yes, rich, they would need to install the version multiserver for you to see this Enterprise Manager option in the CF Admin. But no, they would not need to uninstall the server deployment (what you did) to add to the MultiServer deployment. They can coexist (although it is not something most would do in general).

  The best news for you is that, Yes, they can indeed just set up a second site on their web server, and who also point to the deployment server CF one you have installed. It is, of course, assuming that they are running a web server that supports multiple sites. If it's Apache, you're good. If this is Windows, then as long as the Windows Server 2003 (or 2008 or Vista), you're good, too. (Just to be complete, for other readers, XP does not allow you run multiple sites at the same time.)

  If during the installation of the CF tells you that there all sites on the web server with CF, you need do nothing again create site. It should be immediately able to run pages CF. If you said that it is in CF link to a site, then you will need run the server web Configurator again. You can do it manually, even after installation. See the CF Admin and Config docs to learn more about it, as well as on this issue. (I know many like to just run things and hope that the interface is pretty clear, but as this issue shows, for some things anyone installing CF will be well served by looking at this collection of Miss often.)

  Hope that helps, Rich. It is not a RTFM response. :-) Suffice it to say that if you need more that what I said, it's in the manual. Yet, I am happy to answer follow up if I can.

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• 8 comps with 8 users, how can we all have the same fonts?

  InDesign CC 11.1.0.122 running x 64 build on 8 compositions with 8 users, how can we all have the same fonts?

  It is a very good use for Typekit fonts. If you use all the CC of InDesign, you are all allowed to them for use.

  If you send a document to a team member who has not downloaded the police, it is automatically synchronized on their computer.

• How guys do you overcome (Mac Book and iMac) screen sizes with disabilities when creating scrolling effects, can work the same on both screens when you started with the iMac?

  How guys do you overcome (Mac Book and iMac) screen sizes with disabilities when creating scrolling effects, can work the same on both screens when you started with the iMac?

  Technically, since it's the same effect with the same settings, it works on both sizes. However, you need to test both is to decide if it will appear visually correct on both screens or not. On screens more wider/taller objects can appear earlier on the screen, it is advised to test again on both screens.

  See you soon,.

  Vikas

• How to make a form with report and a form of inclusion in the same page?

  Hey, guys:
  
  I was wondering if you could have any link or examples to show how to make a form with report and a form of inclusion in the same page, these two forms are related to the same table. Our customer wants that a user can add a new row to the table in a form and see all lines created by this user in a report, the report should provide link change as well. the problem is: whenever I inserted a new line or change a line or delete a line, and submitted and return to this page, all hidden elements lost their values, this report is empty, and some display only items also lost their values. Could someone give me any suggestions?
  
  Thank you very much!
  
  Sam

  So, the problem is essentially with page elements lose their session state values when re-loading of the page. How do you define values for the elements of the hidden page? You have default values defined for those? They are based on the database column? What is the "Source" parameter for these items on the page? It is set to "Always, replace any value in session state"? You have any process of 'Empty the Cache', which is reset these values to null element?

  What is your version of the Apex?

  I would recommend that you have installed for example in apex.oracle.com. This would help to better understand the issue.

  Published by: jaouad khalifi on 13 December 2012 22:11

• ASA5510 VPN L2L cannot reach hosts on the other side

  Hello experts,

  I have an ASA5510 with 3 VPN L2L and remote VPN access. Two VPN L2L, Marielle and Aeromique no problem, but for VPN ASPCANADA, to a host behind the ASA 192.168.100.xx, I can't reach 57.5.64.250 or 251 and vice versa. But the tunnel is up. Can you help me please, thank you in advance.

  Add these two lines to the NAT 0 access list:

  inside_outbound_nat0_acl list extended access allowed hosting ASP-NETWORK 255.255.255.0 ip 57.5.64.251

  inside_outbound_nat0_acl list extended access allowed hosting ASP-NETWORK 255.255.255.0 ip 57.5.64.250

  Also make sure this reflection of these statements are also in the distance of the ASA NAT 0-list of access.

  Test and validate results

  HTH

  Sangaré

  Pls rate helpful messages

• VPN site to Site on the same subnet of addresses LAN - cannot communicate

  Hello

  I have the VPN tunnel between Site A and B which are both on the same local network.

  Site A has a lan from 192.168.0.0/24 Interior and a demilitarized zone of 10.0.0.0/24

  Site B has a lan from 192.168.0.0/24 Interior

  I have the Setup vpn to communcaite the Site A DMZ with Site B on the inside.

  The two tunnels are in place but I can't ping the other view and vice versa. Also in the DMZ when I ping the 192.168.0.0/24 range timesout ping, I guess that's because the ping is sent inside the line of A site. Also the DMZ is a secuity level 50 and inside the site lan security level 0.

  Is it possible to make this work?

  Thank you

  John,

  This could be a solution.

  If they NAT their network to their Outside IP address this work, but a little bit different from a regular tunnel.

  If they NAT their 192.168.0.0/24 entiner network IP address outside the box of Juniper, then get implemented and they will be able to send traffic and access to your network without problem. However, you will be able to send traffic (start) on their side, because their internal network behind the external IP address. If such translation is called PAT.

  If you need full two-way communication through the tunnel you should ask them to translate their network in a one to one translation database so that they can get to you and you can view.

  The other solution is to translate their network into your ASA. You can do the following:

  192.168.200.0 static (outdoors, DMZ) 192.168.0.0 netmask 255.255.255.0

  With these lines in place, the configuration of the tunnel will remain the same, no change is required. But when you need to access their network you must point the traffic to the 192.168.200.0/24, not the original 192.168.0.0/24 address.

  So, in case you need to access their 192.168.0.10 your DMZ host, you should actually try to access the 192.168.200.10.

  Why don't you give it a shot and let me know the results?

• Please give index on configuring vpn site to site on 881 to ASA 5505 cisco router

  Earlier my boss asked me to prepare to implement the VPN site-to site on router Cisco 881 Integrated Services to ASA 5505 router, which is now running on the side of HQ. Someone please give me a hint. I am now learning the pdf file from Cisco that mention how to configure VPN site to site between 1812 Cisco IOS router and router of the ASA 5505 using ASDM V6.1 and SDM V2.5. Cannot find the book for the Cisco 881 device.

  Someone please please suggest me something as soon as POSSIBLE.

  Thank you

  CLI version:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00807ea936.shtml

  ASDM and SDM Version:

  http://www.Cisco.com/en/us/partner/products/ps5855/products_configuration_example09186a0080a9a7a3.shtml

• Problems with access to Web sites in the laptop of my mother, both wireless and ethernet connections

  Original title: Internet issues

  My mother's laptop has suddenly stopped to access Web sites. I tried to explore, Firefox and Chrome using both wireless and ethernet... connections we both century link and I tried the two houses... my works laptop on both networks. All three browsers connect to the internet, but not all pages opens. I ran the store and he told me that I should look online for more help... which is not the case, but it cannot determine the problem. Any ideas?

  Hello

  Welcome to the Microsoft community.

  I understand that you have a problem with access to Web sites. We apologize for the inconvenience caused to you and appreciates your efforts to try to resolve the problem.

  I would like to know the details below to help you better

  1. Do you receive an error message/code when you access Web sites?
  2. Do you think that any symbol with exclamation on the icon of this internet access on the taskbar (right)?

  I ask you to try the steps in the Microsoft Help article below and check if it helps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

  Also I ask you to reset TCP/IP and check if it helps.

  How to reset TCP/IP using the NetShell utility
  http://support.Microsoft.com/kb/299357/en-us

  Keep us updated on the issue to help you better.

• How can I get rid of this by-side split screen, where it displays two sites at the same time, covering the major part of one of them to the top?

  Right now, I look at my screen and this mozilla site occupies the right hand of 75% of the screen. On the left hand 25% of my screen, I see a part of the site of scholarship that I want to see and I can't close the window on the right side of the screen without stopping completely from Mozilla. I know this has something to do with the settings, because it happened when I was messing around with the settings but I can't reverse the trend of tha. Thank you!!!

  Opening in the sidebar is the default value for the bookmarks created via a link or a button on a Web site.
  You can view the properties of a bookmark using the context menu in the side bar (Ctrl + B; Command + B on Mac).
  In the Bookmark Manager (Bookmarks > show all bookmarks) you can click on the button more in the lower details pane on the right.
  Make sure "Load this bookmark in the sidebar" is not selected.

• How can I view 2 sites at the same time (using the ms ms ctrl button to split the screen)

  I can't open a second secession of ff if I can use the split screen feature offered by windows. I want to see 2 things at the same time I cannot compare etc.

  Try this: https://addons.mozilla.org/en-US/firefox/addon/fox-splitter/?src=ss

  Alternatively, open a second window of Firefox (Firefox button > new tab > new window or Ctrl + N), the second loading site, resize the windows side by side.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plug-in for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox