ASA Anyconnect

Similar Questions

• ASA anyconnect Webvpn does not work after upgrade to 9.42

  Hello

  I updated ASA5512x to version 9.4 (2) 6. Since the upgrade only anyconnect vpn connection works, if another connection starts, he launched the first out and struggled to start the connection. The ASA has 10 premium licenses and worked at 8.6

  Any advice would be appreciated. Thank you very much.

  Try going to asa942-11-smp - k8.bin.

• PORT of Configuration.DEFAULT of ASA AnyConnect remote VPN access.

  Hello!!! Now, I need to configure the AnyConnect VPN remote access. And I have a question.

  The default 443 AnyConnect port, but the port is occupied on SAA. We use this port for another application.

  How to change the port to connect? Is this true? Thank you!!!

  Hi, please add the following configuration:

  1. Enable the WebVPN on the SAA feature:

     ASA(config)#webvpn

  2. Enable WebVPN services for the external interface of the ASA:

     ASA(config-webvpn)#enable outside

  3. Allow the ASA to listen WebVPN traffic on the custom port number:

     ASA(config-webvpn)#port <1-65535>

• ASA AnyConnect more vs Apex in version show license

  Hello

  I couldn't find good details on what I should see in 'show version' outings with license AnyConnect more or Apex.

  Can you please direct me to the proper documentation or examples of the 2 'show version' output with more an Apex licenses?

  Thanks in advance!

  Peter

  Hi Pete,.

  Unfortunately the ASA will show not explicit if the user uses a Plus or the license of APEX. In the vpn-sessiondb show detailed Anyconnect. The connection will say that it uses premium Anyconnect license.

  -Randy-

• Cisco ASA AnyConnect SSL VPN - certificates + token?

  Hello

  I'm looking for an answer is it possible such configuration:

  The Cisco AnyConnect SSL VPN service with two-factor - first method is the Microsoft CA certificate local and second method - a token solution Symantec VIP password?

  I don't know if two-factor authentication is user/password from Active Directory + OTP by Symantec VIP there is no problem, because you can send the user + pass with Radius, but with certificates I do not really understand who will check the validity of the certificate, which certificate, we will send you to the RADIUS for the validation server and how the configuration of the point of view of ASA will look like.

  Thank you very much for the help!

  Hi Alex,

  I don't see a problem with having certificate + token to connect to the VPN. Certificate authentication must be performed on the SAA, see an example below:

  https://supportforums.Cisco.com/blog/152941/AnyConnect-certificate-based-authentication

  Authentication token can be specified as primary/secondary (authentication SDI) on the SAA, an example below:

  http://www.Cisco.com/c/en/us/TD/docs/security/vpn_client/AnyConnect/anyconnect31/Administration/Guide/anyconnectadmin31/ac11authenticate.html#pgfId-1060345

  It may be useful

  -Randy-

• ASA Anyconnect with PBR

  Hello

  We have a customer who upgraded his ASA to version 9.5.1 and now wants to use ACB for users connected by Anyconnect.
  Today, ASA is configured with an ACL filter which local networks is only allowed in the Tunnel.
  We tried to use the ACB in order to put all traffic through the Tunnel and the next another device on the side break LAN.

  AnyConnect Network: 172.18.18.0/24
  LAN network: 172.18.16.0/24
  Default to use for the anyconnect customer gateway: 172.18.16.202

  It was created an ACL standard for traffic of correspondence 172.18.18.0, a road map which next-hop is 172.18.16.202 and applied to the external interface.

  Gateway 172.18.16.202 knows that net 172.18.18.0/24 is on ASA (static route)

  It is my understanding no? I have configured as indicated above, but did not work.

  Kind regards

  Regis

  Hi Regis,

  If you want to send all Anyconnect traffic to a specific host on the LAN site (next hop), you can use the 'tunnel route' function instead of the ACB.

  Check more information below:

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-next-generation-firewalls/112182-SSL-TDG-config-example-00.html

  It may be useful

  -Randy-

• ASA - Anyconnect is not activated afer reload.

  Hello

  every time my ASA is reloaded anyconnect is not enabled.

  It must be manually enabled.

  I have asa 5510 with version 8.4.2.

  So you say that after you reload, you have a different configuration then before?

  You can make a file compare configs before and after the reboot and see which line is missing, if the case?

• ASA Anyconnect VPN do not work or download the VPN client

  I have a Cisco ASA 5505 that I try to configure anyconnect VPN and thought, I've changed my setup several times but trying to access my static public IP address of the external IP address to download the image, I am not able to. Also when I do a package tracer I see he has been ignored through the acl when the packets from side to the ASA via port 443, it drops because of the ACL. My DMZ so will he look like something trying to access the ASA via the VPN's going to port 443. Here is my config

  XXXX # sh run
  : Saved
  :
  ASA Version 8.4 (3)
  !
  hostname XXXX
  search for domain name
  activate pFTzVNrKdD9x5rhT encrypted password
  zPBAmb8krxlXh.CH encrypted passwd
  names of
  !
  interface Ethernet0/0
  Outside-interface description
  switchport access vlan 20
  !
  interface Ethernet0/1
  Uplink DMZ description
  switchport access vlan 30
  !
  interface Ethernet0/2
  switchport access vlan 10
  !
  interface Ethernet0/3
  switchport access vlan 10
  !
  interface Ethernet0/4
  Ganymede + ID description
  switchport access vlan 10
  switchport monitor Ethernet0/0
  !
  interface Ethernet0/5
  switchport access vlan 10
  !
  interface Ethernet0/6
  switchport access vlan 10
  !
  interface Ethernet0/7
  Description Wireless_AP_Loft
  switchport access vlan 10
  !
  interface Vlan10
  nameif inside
  security-level 100
  IP 192.168.10.1 255.255.255.0
  !
  interface Vlan20
  nameif outside
  security-level 0
  IP address x.x.x.249 255.255.255.248
  !
  Vlan30 interface
  no interface before Vlan10
  nameif dmz
  security-level 50
  IP 172.16.30.1 255.255.255.0
  !
  boot system Disk0: / asa843 - k8.bin
  passive FTP mode
  DNS lookup field inside
  DNS domain-lookup outside
  DNS domain-lookup dmz
  DNS server-group DefaultDNS
  Name-Server 8.8.8.8
  Server name 8.8.4.4
  search for domain name
  network obj_any1 object
  subnet 0.0.0.0 0.0.0.0
  network of the Webserver_DMZ object
  Home 172.16.30.8
  network of the Mailserver_DMZ object
  Home 172.16.30.7
  the object DMZ network
  172.16.30.0 subnet 255.255.255.0
  network of the FTPserver_DMZ object
  Home 172.16.30.9
  network of the Public-IP-subnet object
  subnet x.x.x.248 255.255.255.248
  network of the FTPserver object
  Home 172.16.30.8
  network of the object inside
  192.168.10.0 subnet 255.255.255.0
  network of the VPN_SSL object
  10.101.4.0 subnet 255.255.255.0
  outside_in list extended access permit tcp any newspaper object Mailserver_DMZ eq www
  outside_in list extended access permit tcp any newspaper EQ 587 Mailserver_DMZ object
  outside_in list extended access permit tcp any newspaper SMTP object Mailserver_DMZ eq
  outside_in list extended access permit tcp any newspaper of the Mailserver_DMZ eq pop3 object
  outside_in list extended access permit tcp any newspaper EQ 2525 Mailserver_DMZ object
  outside_in list extended access permit tcp any newspaper of the Mailserver_DMZ eq imap4 object
  outside_in list extended access permit tcp any newspaper EQ 465 Mailserver_DMZ object
  outside_in list extended access permit tcp any newspaper EQ 993 Mailserver_DMZ object
  outside_in list extended access permit tcp any newspaper EQ 995 object Mailserver_DMZ
  outside_in list extended access permit tcp any newspaper EQ 5901 Mailserver_DMZ object
  outside_in list extended access permit tcp any newspaper Mailserver_DMZ eq https object
  Note access list ACL for VPN Tunnel from Split vpn_SplitTunnel
  vpn_SplitTunnel list standard access allowed 192.168.10.0 255.255.255.0
  pager lines 24
  Enable logging
  timestamp of the record
  exploitation forest-size of the buffer to 8192
  logging trap warnings
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  MTU 1500 dmz
  local pool VPN_SSL 10.101.4.1 - 10.101.4.4 255.255.255.0 IP mask
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 647.bin
  don't allow no asdm history
  ARP timeout 14400
  NAT (inside, outside) static source inside inside static destination VPN_SSL VPN_SSL
  NAT (exterior, Interior) static source VPN_SSL VPN_SSL
  !
  network obj_any1 object
  NAT static interface (indoor, outdoor)
  network of the Webserver_DMZ object
  NAT (dmz, outside) static x.x.x.250
  network of the Mailserver_DMZ object
  NAT (dmz, outside) static x.x.x.. 251
  the object DMZ network
  NAT (dmz, outside) static interface
  Access-group outside_in in external interface
  Route outside 0.0.0.0 0.0.0.0 x.x.x.254 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  AAA-server protocol Ganymede HNIC +.
  AAA-server host 192.168.10.2 HNIC (inside)
  Timeout 60
  key *.
  identity of the user by default-domain LOCAL
  Console HTTP authentication AAA HNIC
  AAA console HNIC ssh authentication
  Console AAA authentication telnet HNIC
  AAA authentication secure-http-client
  http 192.168.10.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ca trustpoint localtrust
  registration auto
  Configure CRL
  Crypto ca trustpoint VPN_Articulate2day
  registration auto
  name of the object CN = vpn.articulate2day.com
  sslvpnkey key pair
  Configure CRL
  Telnet 192.168.10.0 255.255.255.0 inside
  Telnet timeout 30
  SSH 192.168.10.0 255.255.255.0 inside
  SSH timeout 15
  SSH version 2
  Console timeout 0
  No vpn-addr-assign aaa

  DHCP-client update dns
  dhcpd dns 8.8.8.8 8.8.4.4
  dhcpd outside auto_config
  !
  dhcpd address 192.168.10.100 - 192.168.10.150 inside
  dhcpd allow inside
  !
  dhcpd address dmz 172.16.30.20 - 172.16.30.23
  dhcpd enable dmz
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  authenticate the NTP
  NTP server 192.168.10.2
  WebVPN
  allow outside
  AnyConnect image disk0:/anyconnect-linux-64-3.1.06079-k9.pkg 1
  AnyConnect enable
  tunnel-group-list activate
  internal VPN_SSL group policy
  VPN_SSL group policy attributes
  value of server DNS 8.8.8.8
  client ssl-VPN-tunnel-Protocol
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list vpn_SplitTunnel
  the address value VPN_SSL pools
  WebVPN
  activate AnyConnect ssl dtls
  AnyConnect Dungeon-Installer installed
  AnyConnect ssl keepalive 15
  AnyConnect ssl deflate compression
  AnyConnect ask enable
  ronmitch50 spn1SehCw8TvCzu7 encrypted password username
  username ronmitch50 attributes
  type of remote access service
  type tunnel-group VPN_SSL_Clients remote access
  attributes global-tunnel-group VPN_SSL_Clients
  address VPN_SSL pool
  Group Policy - by default-VPN_SSL
  tunnel-group VPN_SSL_Clients webvpn-attributes
  enable VPNSSL_GNS3 group-alias
  type tunnel-group VPN_SSL remote access
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect esmtp
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e
  : end

  XXXX #.

  You do not have this configuration:

   object network DMZ nat (dmz,outside) static interface

  Try and take (or delete):

   object network DMZ nat (dmz,outside) dynamic interface

• ASA Anyconnect and Posture assessment

  Hello

  I have read the configuration guide Cisco ASA VPN ASDM 7.2 and also the Anyconnect Client Admin Guide 4.1 and can't find a clear answer as to how to implement assesment of endpoint.

  I see options for the use of the Module of Posture AnyConnect, HostScan and Secure Desktop. They appear on the page to download the Cisco software as

  separate downloads be prédéployées customers. I have a client who wishes to also VPN connections without client on the SAA to have an evaluation of the endpoint.

  I don't know what software to use three options, or how it should be deployed to the client, or client VPN connection. If anyone has all the answers to what precedes, or can point me to a link with the information, I would be grateful.

  Thank you

  Jim

  Without client by definition means we do not have any software installed on the client. So the Module of Posture AnyConnect can not be used for Clientless SSL VPN.

  HostScan and Secure Desktop are modules of execution if they can be invoked for connections without client.

  Note that this are not very actively developed and will probably eventually deprecated. Cisco tries to refer clients to a solution complete including the ISE and the AnyConnect ISE Posture of the AnyConnect Client module option ensure complete mobility.

• Cisco ASA Anyconnect LAN access problem

  I have very simple network at home with the WAN IP address, ASA uses DHCP and gateway. plain of network of all no complications.

  X.X.X.X like a WAN

  192.168.1.0/24 as a LAN

  IP Pool 192.168.6.0/24 (VPN Pool)

  I am trying to configure AnyConnect (AC) so that I can connect remotely and get my resources on the LAN while out. I am to connect with AC and when you use split tunnel I'm browsing the web very well, but I have no access to the local network (without ICMP or TCP/UDP)

  Route looks good in customer AC

  unsecured network 0.0.0.0/0
  secure network 192.168.1.0/24

  What I'm missing for LAN access?, nat statement, list of access...?

  _____________________________

  Output of the command: "show run".

  : Saved
  :
  ASA Version 9.1 (5)
  !
  hostname asa01
  domain name asa

  names of
  192.168.6.2 mask - 192.168.6.100 local pool Pool VPN IP 255.255.255.0
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  switchport access vlan 5
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  interface Vlan2
  Outside description
  nameif outside
  security-level 0
  IP address XXXX
  !
  interface Vlan5
  nameif dmz
  security-level 50
  IP 192.168.100.1 address 255.255.255.0
  !
  boot system Disk0: / asa915 - k8.bin
  passive FTP mode
  clock timezone PST - 8
  clock summer-time recurring PDT
  DNS lookup field inside
  DNS domain-lookup outside
  DNS domain-lookup dmz
  DNS server-group DefaultDNS
  domain naisus.local
  permit same-security-traffic intra-interface
  network of the NETWORK_OBJ_192.168.1.0_24 object
  subnet 192.168.1.0 255.255.255.0
  network of the NETWORK_OBJ_192.168.6.0_25 object
  subnet 192.168.6.0 255.255.255.128
  object-group Protocol DM_INLINE_PROTOCOL_1
  icmp protocol object
  icmp6 protocol-object
  outside_access_in list extended access permit icmp any any idle state
  outside_access_in extended access list allow icmp6 all all idle state
  outside_access_in_1 list extended access allow DM_INLINE_PROTOCOL_1 of object-group a
  list of access allowed standard LAN 192.168.1.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  host of logging inside 192.168.1.99
  forest-hostdown operating permits
  Within 1500 MTU
  Outside 1500 MTU
  MTU 1500 dmz
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 741.bin
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  NAT (inside, outside) static source NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.6.0_25 NETWORK_OBJ_192.168.6.0_25 non-proxy-arp-search of route static destination
  !
  NAT source auto after (indoor, outdoor) dynamic one interface
  Access-group outside_access_in_1 in interface outside
  Route outside 0.0.0.0 0.0.0.0 X > X > X >
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  identity of the user by default-domain LOCAL
  Enable http server
  http 192.168.1.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Crypto ipsec ikev2 ipsec-proposal OF
  encryption protocol esp
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 proposal ipsec 3DES
  Esp 3des encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES
  Esp aes encryption protocol
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 ipsec-proposal AES192
  Protocol esp encryption aes-192
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec ikev2 AES256 ipsec-proposal
  Protocol esp encryption aes-256
  Esp integrity sha - 1, md5 Protocol
  Crypto ipsec pmtu aging infinite - the security association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  Crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0
  registration auto
  full domain name no
  name of the object CN = asa01, CN = 192.168.1.1
  ASDM_LAUNCHER key pair
  Configure CRL
  trustpool crypto ca policy
  string encryption ca ASDM_Launcher_Access_TrustPoint_0 certificates
  certificate 8b541b55
  308201c 3 c 3082012 a0030201 0202048b 0d06092a 864886f7 0d 010105 541b 5530
  XXXX
  quit smoking
  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 10
  aes-192 encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 20
  aes encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 30
  3des encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  IKEv2 crypto policy 40
  the Encryption
  integrity sha
  Group 2 of 5
  FRP sha
  second life 86400
  Crypto ikev2 access remote trustpoint ASDM_Launcher_Access_TrustPoint_0
  Telnet 192.168.1.0 255.255.255.0 inside
  Telnet timeout 5
  SSH stricthostkeycheck
  SSH 192.168.1.0 255.255.255.0 inside
  SSH timeout 5
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0

  dhcpd outside auto_config
  !
  dhcpd address 192.168.1.100 - 192.168.1.199 inside
  dhcpd dns 8.8.8.8 75.75.75.75 interface inside
  dhcpd naisus.home area inside interface
  dhcpd allow inside
  !
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  NTP server 50.116.56.17 source outdoors
  NTP server 108.61.73.243 source outdoors
  NTP server 208.75.89.4 prefer external source
  SSL-trust outside ASDM_Launcher_Access_TrustPoint_0 point
  Trust ASDM_Launcher_Access_TrustPoint_0 inside the vpnlb-ip SSL-point
  SSL-trust ASDM_Launcher_Access_TrustPoint_0 inside point
  WebVPN
  allow outside
  AnyConnect image disk0:/anyconnect-win-3.1.07021-k9.pkg 1 regex 'Windows NT'
  AnyConnect image disk0:/anyconnect-macosx-i386-3.1.07021-k9.pkg 2 regex "Intel Mac OS X.
  AnyConnect image disk0:/anyconnect-linux-64-3.1.07021-k9.pkg 3 regex "Linux".
  AnyConnect enable
  tunnel-group-list activate
  attributes of Group Policy DfltGrpPolicy
  VPN - connections 30
  VPN-idle-timeout 5
  internal GroupPolicy_AC_Profile group strategy
  attributes of Group Policy GroupPolicy_AC_Profile
  WINS server no
  4.2.2.2 DNS server value
  client ssl-VPN-tunnel-Protocol
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value LAN
  naisus.local value by default-field
  XX XX encrypted privilege 15 password username
  name of user XX attributes
  WebVPN
  chip-tunnel tunnel-policy tunnelall
  type tunnel-group AC_Profile remote access
  attributes global-tunnel-group AC_Profile
  address pool VPN-pool
  Group Policy - by default-GroupPolicy_AC_Profile
  tunnel-group AC_Profile webvpn-attributes
  enable AC_Profile group-alias
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:xxx
  : end

  I'm not positive that's causing the problem, but I noticed that you have defined incoherent poolside VPN as a 24 (in the command name and that name is associated with the tunnel group) and 25 (in the command object on the network that is also referenced in the statement of NAT exempting NAT to that object). True your pool assigns addresses from the lower half of the 24, but still...

  I try to simplify things by using a single object for something like that, which is used in several places. With the help of objects the way they are intended, and which allows to avoid any discrepancies.

• ASA AnyConnect client is unable to obtain the IP address of the remote DHCP server

  I and ASA with 10 client AnyConnect profiles set up to get their IP address of my Windows DHCP server.

  It was working fine yesterday.

  I saved the config and rebooted the device.

  Now it won't deliver to my vpn clients intellectual property.

  I don't understand what is happening.

  If I change the profiles to use a local pool he assigns an IP address and works very well.

  But I can't use the local pools.  I have to use the DHCP server on the local network.

  The ONLY thing that was made was that a license allowing the AnyConnect Essentials has been installed recently.

  I get this in debugging:

  6 August 30, 2011 10:44:39 DAP: test49, Addr 107.44.142.20 user, connection AnyConnect: following DAP records were selected for this connection: DfltAccessPolicy

  6 August 30, 2011 10:44:39 group user IP <107.44.142.20>AnyConnect parent session began.

  7 August 30, 2011 10:44:39 IPAA: received message 'UTL_IP_ [IKE_] ADDR_REQ.

  6 August 30, 2011 10:44:39 IPAA: attempt to query DHCP 1 successful

  6 August 30, 2011 10:44:39 IPAA: DHCP configured, the request succeeded for tunnel-group "MCSO-mobile."

  6 August 30, 2011 10:44:39 172.18.4.7 67 172.18.1.46 67 Built UDP outgoing connection 30957 for Internal:172.18.1.46/67 (172.18.1.46/67) at identity:172.18.4.7/67 (172.18.4.7/67)

  7 August 30, 2011 10:44:39 192.168.6.1 built ISP1:192.168.6.1 local-home

  6 August 30, 2011 10:44:39 172.18.1.46 1 192.168.6.1 0 built outgoing ICMP connection for faddr gaddr laddr 172.18.1.46/1 172.18.1.46/1 192.168.6.1/0

  6 August 30, 2011 10:44:41 172.18.1.46 67 192.168.6.0 67 Built UDP outgoing connection 30960 for ISP1:192.168.6.0/67 (192.168.6.0/67) at Internal:172.18.1.46/67 (172.18.1.46/67)

  6 August 30, 2011 10:44:42 192.168.6.1 0 172.18.1.46 1 connection disassembly ICMP for faddr gaddr laddr 172.18.1.46/1 172.18.1.46/1 192.168.6.1/0

  7 August 30, 2011 10:44:52 IPAA: message received 'UTL_IP_DHCP_INVALID_ADDR '.

  4 August 30, 2011 10:44:52 IPAA: could not get the address of the local strategy group or tunnel-group pools

  Well, your config looks good. You also upgrade the operating system? Maybe you hit a new bug.

  I heard no problems after the installation of a license, but it might be interesting to open a TAC case and learn if you hit a bug.

• Remove all the config ASA anyconnect

  Hi all

  I need to remove config ASA cisco anyconnect.

  Is there any command I can run from the command line that will do the work?

  Concerning

  MAhesh

  Mahesh,

  There is no specific AnyConnect sort of macro command to do this. If you are looking just to reset everything in the config, you can use the command configures the default factory .

  Otherwise, you just remove the individual sections / lines with commands 'no... '. ». Note that when things are in sections ("group policy" and "tunnel-group", for example), you can delete the section in a single ' ' command without having to enter each line of paragraph and remove individual.

  You must also delete profiles (xml files) that you created and (pkg) AnyConnect image files on the disk to be totally complete.

• NAC and ASA AnyConnect Essentials

  If you have the Essentials AnyConnect VPN license - the ASA is able to do all of the NAC such as searching the registry value or check his firewall definitions are up-to-date?  Thank you.

  With an AnyConnect Essentials license is activated, without client feature WebVPN, Cisco Secure Desktop (CSD) and assessment of Advanced endpoint is disabled.  For this reason, you won't be able to make the registry checks, check the antivirus updates, etc..

• ASA, Anyconnect and DMZ

  Hello

  I had a little problem with my config to the asa.

  The asa is set up to allow anyconnect with local users.

  but after I added the NAT statement following ACL on the outside, I can not connect with Anyconnect.

  NAT (DMZ, OUTSIDE) interface static source HOST_DMZ-NAS-FTP

  OUTSIDE_access_in list extended access permitted tcp HOST_DMZ-NAS-FTP eq ftp objects

  How to make it work again?

  Hello

  You have a dominant NAT configuration.

  We should see a Phase of Nations United-NAT in the beginning before any other Phase of the ACCESS-LIST.

  You probably have a dynamic configuration PAT for the demilitarized zone in Section 1 Manual NAT which is at the origin of the problems

  Because you cannot share the configuration that I can not really anything else that try to give an alternative configuration, which should make it work but it is not the ideal configuration for your dynamic rule PAT shouldn't be to such priority anyway. That's if I'm wrong in my guess on the problem above.

  Remove NAT Auto / network object NAT I suggested

  network of the HOST_DMZ-NAS-FTP object

  no nat (DMZ, OUTSIDE) interface static 21 21 tcp service

  Note that we leave the 'host' under the 'object' statement yet. Only remove us the "nat" command.

  Then, you must add these

  Service FTP object

  tcp source eq 21 service

  service interface NAT (DMZ, outside) 1 static source HOST_DMZ-NAS-FTP FTP FTP

  Then try again.

  -Jouni

• Restrictions of ASA Anyconnect for Split Tunneling network list

  Hello

  I have a question. We use Cisco ASA 5520 9.1.1 firmware version with configure SSL VPN Anyconnect(Anyconnect client version 2.5.605).)

  We use the big Split Tunneling access-list with 200 ACEs.

  If I add more than 200 entries in the list of access and then I connect to the VPN, and after that, we will see that only 200 entries have been added to the routing table.

  So my question is... There is a limit for Split Tunneling ACL when you use the Anyconnect client?

  Thank you

  Hello

  This is very well document in one of internal bug at Cisco . Unfortunately, as it is internal I will not be able to share the same with you. The only workaround available as of now is to combine your networks and make the list as small as possible covering all the required network you need which is less than or equal to 200

  Thank you

  Jeet Kumar