ASA AnyConnect client is unable to obtain the IP address of the remote DHCP server

Similar Questions

• Unable to display the remote folder: the remote folder F:/wamp/www / "MYWEBSITENAME" / is not accessible or does not exist.

  In CS4, all of a sudden, I get the error "unable to display the remote folder: the remote folder F:/wamp/www /"MYWEBSITENAME"/ is not accessible or does not exist.»

  I'm in Manage Sites and test the file in the remote folder and it says "Dreamweaver connected to your web service successfully.

  I have not changed anything.  I had this once before a few years ago and just copied on the site of a new name and that fixed it, but it does not for the moment.

  Help.   Any ideas?  Thank you

  When you click the expand button in your files window, whose icon is selected in the upper part?

  

  The middle one is the test server (list of lightning bolt), if you try to download, you will need to switch to the remote server (standard search bullet list icon).

  If you do not have a local server running on a drive of F, and you try to put it on the test server, you will get an error saying: there is no. Is it happening?

  If you do not have a local server running on your F drive, remove the test server info, it is not necessary.

• DOUBLE DB: ORA-17629: unable to connect to the remote database server

  [oracle@ora11g1 ~] $ export ORACLE_SID = sales
  [oracle@ora11g1 ~] $ rman target sys/sales@sales
  
  Recovery Manager: release 11.2.0.1.0 - Production Wed Jun 5 13:00:15 2013
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
  
  connected to target database: SALES (DBID = 690066655)
  
  RMAN > Connect auxiliary sys/salestby2@salestby2
  
  connected to the auxiliary database: SALES (not mounted)
  
  RMAN > CURRENT SPFILE DATABASE of TARGET duplicate FOR THE EVE OF the DATABASE
  2 > DB_NAME SET = 'sales '.
  3 > SET DB_UNIQUE_NAME = "salestby2".
  4 > control_files='/u02/oradata/salestby2/control01.ctl','/u02/oradata/salestby2/control02.ctl SET'
  5 > SET DB_FILE_NAME_CONVERT = "/ u02/oradata/sales /", "/ u02/oradata/salestby2 / '.
  6 > SET LOG_FILE_NAME_CONVERT = "/ u02/oradata/sales /", "/ u02/oradata/salestby2 / ';
  
  From duplicate Db 5 June 13
  using the control file of the target instead of recovery catalog database
  allocated channel: ORA_AUX_DISK_1
  channel ORA_AUX_DISK_1: SID = 20 type of device = DISK
  
  content of Script memory:
  {
  backup that copy reuse
  TargetFile ' / auxiliary format of the u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsales
  ' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsalestby2' targetfile
  ' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesales.ora' auxiliary format
  ' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora';
  clone of SQL 'alter system set spfile = "/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora";
  }
  execution of Script memory
  
  From backup 5 June 13
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 58 type of device = DISK
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 05/06/2013 13:05:26
  ORA-17629: unable to connect to the remote database server
  ORA-17627: ORA-01017: name of user and password invalid. connection refused
  ORA-17629: unable to connect to the remote database server
  continue other job steps, not a not working will not re-run
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Db in dual at 05/06/2013 13:05:27
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 05/06/2013 13:05:27
  ORA-17629: unable to connect to the remote database server
  ORA-17627: ORA-01017: name of user and password invalid. connection refused
  ORA-17629: unable to connect to the remote database server

  Welcome to the oracle forums!

  Please take the time to go through [url https://forums.oracle.com/forums/ann.jspa?annID=1535] FAQ PAGE

  Always after 4 version oracle numbers and details of the OS.

  Post any request outside has put between.

    \
  

  Tags

  Mark your questions answers if you give the answer

  Password for the SYS user on primary and standby must be the same. Copy the master password for the backup server

  SCP $ORACLE_HOME/dbs/orapwv112 : /u01/app/oracle/product/11.2/dbs/orapwdupv112

• Unable to see the link Analytics Server option in EA

  Hi all
  
  We installed and configured EAL 11.1.1 on our server. We have no error but now when connect us to EAS, we are unable to see the new EAL (Server Analytics link) option in the Regional service console.
  
  Can you please advice. Thanks in advance.
  
  Concerning

  Do you have you are importing the plugin in EAS - http://docs.oracle.com/cd/E17236_01/epm.1112/eal_install/frameset.htm?post_configuring.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• ORA-17629: unable to connect to the remote database server

  Hello
  
  I have put Dataguard in place with primary and 1 physical standby for learning/test database:
  
  I do NOT plan the unloading of RMAN backups on the physics of the day before.
  
  Recorded the primary database with RMAN and when "resync catalog db_unique_name all;" is issued.
  I get the following error:
  ---------------------------------------------------------------------------------------------------------------------
  RMAN > catalog resync db_unique_name all;
  from full resynchronization of the recovery catalog
  full complete Resync
  resynchronization of data base with DB_UNIQUE_NAME ASTTESTB
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failed to db_unique_name resynchronization command at 28/09/2011 11:34:23
  ORA-17629: unable to connect to the remote database server
  ORA-17628: Oracle 17629 error returned by remote Oracle Server
  ------------------------------------------------------------------------------------------------------------------
  Configuration of RMAN for the main proceedings are the following:
  
  RMAN > show all to db_unique_name asttest;
  
  RMAN settings for database with db_unique_name ASTTEST are:
  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
  CONFIGURE BACKUP OPTIMIZATION # by default
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP # by default
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
  CONFIGURE DB Nom_unique "asttest" CONNECT IDENTIFIER ' ASTTEST. UMDNJ. EDU'; _
  CONFIGURE DB "Asttestb" of nom_unique CONNECT IDENTIFIER "asttestb"; _
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / opt/oracle/product/11.2.0/dbhome_1/dbs/snapcf_asttest.f'; # by default
  
  Configuration of RMAN for instance physical standby are:
  
  RMAN > show all to db_unique_name asttestb;
  
  RMAN settings for database with db_unique_name ASTTESTB are:
  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
  CONFIGURE BACKUP OPTIMIZATION # by default
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default
  CONFIGURE DB Nom_unique "asttest" CONNECT IDENTIFIER ' ASTTEST. UMDNJ. EDU'; _
  CONFIGURE DB "Asttestb" of nom_unique CONNECT IDENTIFIER "asttestb"; _
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / opt/oracle/product/11.2.0/dbhome_1/dbs/snapcf_asttest.f'; # by default
  
  ----------------------------------------------------------------------------------------------------------------------
  
  When I tested missing missing datafile and control file scenario on the primary database, it worked (Advisor to recover data)
  
  However, missing datafile scenario does not work on the physics of the day before.
  Here are the steps I followed:
  ********************************************
  1 renamed a file of physical data - in standby mode:
  
  bash - $3.2 ls - ltr
  
  Total 107832
  
  -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log
  
  -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 11:00 rmandg_data01.dbf
  
  bash - $3.2 mv rmandg_data01.dbf rmandg_data01.dbf_old
  
  bash - $3.2 ls - ltr
  
  Total 107832
  
  -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log
  
  -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 11:00 rmandg_data01.dbf_old
  
  
  2. restore the datafile (find the data file # view v$ recover_file):
  RMAN > restore datafile 5;
  
  
  
  From restoration to 5 October 11
  
  Segmentation fault
  
  
  3. in spite of the error, published "recover datafile command.
  
  4 RMAN > recover datafile 5;
  
  
  
  From pick up to 5 October 11
  
  allocated channel: ORA_DISK_1
  
  channel ORA_DISK_1: SID = 10 type of device = DISK
  
  RMAN-00571: ===========================================================
  
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  
  RMAN-00571: ===========================================================
  
  RMAN-03002: failure of the command recover at 05/10/2011 12:00:40
  
  RMAN-06094: datafile 5 must be restored.
  
  
  5. manually copy the physical primary datafile - in standby mode, & then problem recover RMAN command:
  bash - $3.2 scp oracle@msudrainier:/ora03/oradata/asttest/rmandg_data01.dbf.
  
  rmandg_data01.dbf 100% 50 MB 16.7 MB/s 00:03
  
  bash - $3.2 ls - ltr
  
  Total 159096
  
  -rw - r - 1 oracle oinstall 52429312 16 September 12:19 asttest_redo03.log
  
  -rw - r - 1 oracle oinstall 61874176 Sep 29 15:41 asttest_temp01.dbf
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 11:49 rmandg_data01.dbf_old
  
  -rw - r - 1 oracle oinstall 52436992 5 Oct 12:01 rmandg_data01.dbf
  
  
  RMAN > recover datafile 5;
  
  
  
  From pick up to 5 October 11
  
  using channel ORA_DISK_1
  
  
  
  RMAN-00571: ===========================================================
  
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  
  RMAN-00571: ===========================================================
  
  RMAN-03002: failure of the command recover at 05/10/2011 12:01:59
  
  RMAN-06067: RECOVER the DATABASE required with a backup control file or created
  
  
  6. of course RMAN commands have failed to restore the missing data file;
  So I renamed the file to original and rebooted repeat services applies - this restore the data file and now the configuration state of the DG is normal.
  *********************************************************************************
  
  Not quite sure if I'm still he hands the right way or if the error above is related to RMAN not able to synchronize with the physics of the day before.
  
  The documentation I want to talk to is here (1 paragraph):
  
  [http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJDFBDD | http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/rman.htm#BAJDFBDD]
  
  
  Any pointers/direction and advise is greatly appreciated.
  
  Best regards
  NK

  I got it!

  /home/oracle:STANDBY >$ORACLE_HOME/bin/rman target sys/ catalog /@rcatalog
  
  Recovery Manager: Release 11.2.0.1.0 - Production on Fri Oct 7 14:12:10 2011
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: PRIMARY (DBID=1562898590, not open)
  connected to recovery catalog database
  
  RMAN> resync catalog from db_unique_name all;
  
  resyncing from database with DB_UNIQUE_NAME PRIMARY
  starting full resync of recovery catalog
  RMAN output not resynced for database with DB_UNIQUE_NAME PRIMARY
  full resync complete
  

  If the necessary connection string a target/sys and a catalogue

  RMAN target sys / catalog /@rcatalog

  I did my standby

  Will try the primary

  Best regards

  mseberg

  Work on both. Great question!

  connected to target database: PRIMARY (DBID=1562898590)
  connected to recovery catalog database
  
  RMAN> resync catalog from db_unique_name all;
  
  starting full resync of recovery catalog
  full resync complete
  
  resyncing from database with DB_UNIQUE_NAME STANDBY
  RMAN output not resynced for database with DB_UNIQUE_NAME STANDBY
  
  RMAN> 
  

  Published by: mseberg on October 7, 2011 14:16

  Thanks a ton for sticking to it. I'll add this little thing to my web site.

  Published by: mseberg on October 7, 2011 14:22

• VPN error 868 the name of the remote access server is not resolved

  I use Windows 7 Home Premium and you want to configure a VPN with my office network that uses the Check Point Safe@Office.  I am unable to log in and get the error that does not resolve the name of the remote access server and Windows cannot find the host using DNS name.  Any suggestions on what to try to fix the problem?  I set up the VPN connection according to the instructions of our network administrator.  We use XP in the office.

  Hello
  Welcome to the Microsoft answers site

  The question that you'd be better suited in the TechNet community. Please visit the link below to find a community that will provide the best support.
  http://social.technet.Microsoft.com/forums/en-us/ForefrontedgeVPN/threads

  It may be useful
  Thanks and greetings
  Support Microsoft-dieng
  Visit our Microsoft answers feedback Forum and let us know what you think
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• The virtual DHCP server does not work why?

  Hello

  I used the workstation to create a virtual machine with NAT connection. The virtual machine works well in my computer with WiFi, and it can get an IP address from the virtual DHCP server successfully. Then I copied it on another computer with no network connection (no wifi, no cable connection). After startup, the virtual machine cannot obtain an IP address from the DHCP server. In my opinion, if she has a physical or network connection, the DHCP server should work anywhere. I wonder why the server may not work.

  Also, is there any document to introduce inside the vmware network. Thank you!

  Yes, NAT is the network setting that allow you to generate ip which is pre defined in the virtual network Editor. and your virtual machine will also communicate to the outside network.

  On the contrary if you change host Only.The vm will get the ip address range but they will communicate within your host not the outside world. If no internet connection then. (No network connectivity don't require in this case)

• Cisco ASA 5505 unable to access the remote network

  Hello

  I have a Cisco ASA 5505, with 50 basic license, which is connected directly to the Modem cable with a public IP address. I have configured and active VPN on the outside interface. When connect us, we connect well without error, but we are not able to access all the resources on the remote network.

  ASA IOS version 8.2 (5)

  Remote IP network: 10.0.0.0/24

  VPN IP Pool: 192.168.102.10 - 25

  I have attached the config: llc.txt

  Please let me know if you have any questions.

  Thank you!

  Hello

  Try adding NAT 0 because inside subnet--> subnet distance

  NAT (inside) 0 access-list TEST

  TEST access ip 10.0.0.0 scope list allow 255.255.255.0 192.168.102.10 255.255.255.224

  HTH

  MS

• Unable to access the remote host

  Here is the configuration of pix of my client, the problem, here is... whenever it uses a Cisco VPN dialier, it can connect to the VPN, but cannot access any host on the distance, but with the same vpn Dialer & VPN pcf file, when it is used with a connection high speed which is not route with this PIX (or not behind the PIX) It works very well. Yet one thing I noticed, it's only when I give a static NAT, it is able to access on the remote & not through a NAT GLOBAL PC when the PC is behind the PIX.

  6.3 (3) version PIX

  interface ethernet0 car

  Auto interface ethernet1

  Auto interface ethernet2

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  nameif dmz security50 ethernet2

  enable encrypted password xxx

  enable encrypted password xxx

  TA.qizy4R//ChqQH encrypted passwd

  fixup protocol dns-maximum length 1024

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol pptp 1723

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  No fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  No fixup not protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol tftp 69

  access ip-list 110 permit a whole

  access-list 120 allow icmp a whole

  access-list 120 allow esp a whole

  logging console warnings

  Monitor logging warnings

  logging buffered stored notifications

  recording of debug trap

  the logging queue 0

  Outside 1500 MTU

  Within 1500 MTU

  MTU 1500 dmz

  IP address outside x.x.x.x 255.255.255.240

  IP address inside 192.168.0.1 255.255.0.0

  no ip address address dmz

  alarm action IP verification of information

  alarm action attack IP audit

  IP local pool homeuser_vpn 192.168.1.1 - 192.168.1.254

  location of PDM 192.168.0.80 255.255.255.255 inside

  location of PDM 192.168.0.207 255.255.255.255 inside

  location of PDM 0.0.0.0 0.0.0.0 outdoors

  forest warnings of PDM 100

  history of PDM activate

  ARP timeout 14400

  Global 1 x.x.x.66 (outside)

  NAT (inside) 0-list of access 123nonat

  NAT (inside) 1 192.168.0.0 255.255.0.0 0 0

  public static x.x.x.70 (Interior, exterior) 192.168.3.1 netmask 255.255.255.255 0 0

  public static x.x.x.76 (Interior, exterior) 192.168.3.2 netmask 255.255.255.255 0 0

  static (inside, outside) x.x.x.77 192.168.3.3 netmask 255.255.255.255 0 0

  Access-group 120 in external interface

  Access-group 110 in the interface inside

  Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  the ssh LOCAL console AAA authentication

  source of x.x.x.x server NTP outside prefer

  Enable http server

  http 0.0.0.0 0.0.0.0 outdoors

  http 192.168.0.207 255.255.255.255 inside

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Telnet 192.168.0.197 255.255.255.255 inside

  Telnet 192.168.0.80 255.255.255.255 inside

  Telnet timeout 5

  SSH 0.0.0.0 0.0.0.0 outdoors

  SSH 192.168.0.0 255.255.0.0 inside

  SSH timeout 60

  Console timeout 0

  dhcpd lease 3600

  dhcpd ping_timeout 750

  username admin password encrypted xxxx privilege 15

  username password encrypted xxx privilege 2 admin1

  Terminal width 80

  Cryptochecksum:xxx

  : end

  # 123

  Anand,

  I would check to make sure that the N - NAT has something like: -.

  "permit access ip 192.168.0.0 list 123nonat 255.255.255.0 192.168.1.0 255.255.255.0.

  And enable NAT - T - she might be his house do not understand/IPSEC passthrough device support:--

  "isakmp nat-traversal 20.

  And add: -.

  "access-list 120 permit udp any any eq 4500.

  HTH.

• Silent install Weblogic 12.1.1-> unable to locate the product WebLogic Server «»

  Hi all
  
  I try to install Weblogic 12.1.1 through the installation in silent mode. I have already installed the JDK 1.7 works on Solaris 10.
  What is happening here:
  root@usqwrts001:/tmp/Karin# java-d64-Xmx1024m-jar wls1211_generic.jar - mode = silent-silent_xml=/tmp/karin/silent.xml.long-log=./install.out
  Extracting 0%.................................................................................................... 100%
  The local registry of BEA products is corrupted. Please select another House of Middleware or contact the Oracle Support
  root@usqwrts001:/tmp/Karin# less install.out
  2013-03-20 11:16:14, 862 INFO [readSilentXML] com.bea.plateng.wizard.installer.common.parsers.TemplateParser - Silent xml file successfully treated...
  2013-03-20 11:16:22, 240 WARN [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - value of the property for solaris32_jdk160_29b11.zip not found...
  2013-03-20 11:16:22, 302 ERROR com.bea.plateng.wizard.installer.helpers.BEAHomeHelper [home] - error affecting the selections!
  com.bea.cie.gpr.model.RegistryException: could not find the product "WebLogic Server.
  at com.bea.cie.gpr.internal.model.HomeTargetImpl.setSelections(HomeTargetImpl.java:364)
  at com.bea.plateng.wizard.installer.helpers.BEAHomeHelper.buildTarget(BEAHomeHelper.java:158)
  at com.bea.plateng.wizard.installer.silent.tasks.SilentBEAHomeTask.execute(SilentBEAHomeTask.java:33)
  at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
  at java.lang.Thread.run(Thread.java:722)
  2013-03-20 11:16:22, 307 ERROR [host] com.bea.plateng.wizard.installer.silent.tasks.SilentBEAHomeTask - local BEA product registry is damaged. Please select another House of Middleware or contact the Oracle Support
  
  My silent.xml.long looks like this:
  root@usqwrts001:/tmp/Karin# less silent.xml.long
  <? XML version = "1.0" encoding = "UTF-8"? >
  < bea-Installer >
  < input-fields >
  "< name value ="BEAHOME"value="/opt/weblogic-12.1-MP1 "/ >
  "< name value ="WLS_INSTALL_DIR"value="/opt/weblogic-12.1-MP1/weblogic-12.1-MP1 "/ >
  < value name = "COMPONENT_PATHS".
  value = "Server/Core WebLogic application server |" WebLogic Server
  / Administration console. Upgrade and the WebLogic Server Configuration Wizard.
  Framework | Server HTTP Pub - Sub WebLogic Server/Web 2.0 | WebLogic Server/WebLogic
  JDBC drivers. WebLogic Server/third party drivers JDBC | WebLogic Server
  / WebLogic Server clients. WebLogic Server/WebLogic Web Server Plugins
  | WebLogic Server/Xquery Support. Examples of WebLogic Server/server | Oracle coherence/consistency produces files"/ >
  < name value = "INSTALL_NODE_MANAGER_SERVICE" value = "no" / >
  < name value = value="/opt/jdk1.7.0_11"/ "LOCAL_JVMS" >
  < / entry-fields >
  < / bea-Installer >
  
  I already tried with simply < value name = "COMPONENT_PATHS" value = "WebLogic Server" / > instead of the bunch, but the behavior has not changed.
  
  My environment settings:
  root@usqwrts001:/tmp/Karin# echo $JAVA_HOME
  /opt/JDK1.7.0_11/bin/sparcv9/
  root@usqwrts001:/tmp/Karin# echo $PATH
  /opt/JDK1.7.0_11/bin/sparcv9:/sbin:/usr/bin:/usr/sbin:/usr/platform/sun4v/sbin:/usr/local/bin:/opt/OpenSSH/bin:/usr/openwin/bin
  
  As there is no bin under sparcv9 directory (which contains the 64-bit modules), I took sparcv9 again for the path (instead of taking $JAVA_HOME/bin as described in the documentation). But I also tried the bin (without sparcv9) directory with the same effect.
  
  Someone has an idea for me?
  Thank you very much in advance
  Karin.

  Is - this line

  on a line, or is it enters init, for example,.

  If so, try to put it on a line.

• Portege R500: unable to connect the remote DVI monitor via Dynadock

  Hello

  I just connected Dynadock (DVI) with my Portege R500. The cell would be supported - according to Toshiba - but my experience confirms that Dynadock is not able to access the DVI ports. This implies, that Dynadock is nothing more than the USB HUB.

  My setup: Vista 32 company b (CZE edition), the latest patches, Toshiba R500.

  Software: latest dynadock software 2.3 c.

  Symptom: I can't connect to the remote DVI monitor via the dynadock, there are only two external panels with 800 x 600, but Vista does not allow me to choose.

  More information: software Dynadock requires to run without Microsoft Defender, otherwise it blocks the service: DisplayLinkService; file:C:\Program Files\DisplayLink base Software\DisplayLinkService.exe
  If you turn off the MSDef, the "error 2738" message appears when you connect the dynadock and when Vista tries to install a missing drivers for you.
  Yes, I know the VBS question and the problem is not caused by VisualBasic - VBS "Hello World" runs.

  If you think always, Toshiba Dynadock is compatible with Toshiba R500, then press Fn + F5 and look at your logs and you should find something like:
  In English: igfxext.exe throws an exception 0xc000000d, offset 0x0000f9f8.

  I look forward to the comments, advice etc. If you are able to transmit this bug report to a responsible engineer, do please.

  Hello Leo

  As far as I know, Toshiba has not designed for laptops models own only Dynadock and it can be used on every laptop or fixed. Because of this, I think that this statement about model of care is not so important for this problem.

  Toshiba provides devices and software. To connect using the USB port, and these ports must each computer or laptop. I hope that you have installed the software by following the on-screen instructions (device of should not be connected to the start-up of the plant).

  Is your Portege docked the host or you have connected Dynadock directly in Portege s USB port?

• "Unable to detect the remote device" Bluetooth re Nokia phone

  I have two Nokia phones and can not connect to my laptop Toshiba Tecra via bluetooth

  I am running XP SP3
  V6.10.10 (T) battery Toshiba BT
  Nokia PC Suite 7.0.8.2 version

  Information system in Nokia PC suite pointed out two stacks of BT compatible:
  Microsoft Version 5.1.2600
  Toshiba 6.0.7y19.0
  The help of Nokia says "If your Bluetooth software is not supported by Nokia PC suite, this is mentioned in the information of Nokia PC suite window"
  There is no indication in the information of Nokia PC suite window that my Bluetooth software is not supported.

  I constantly receive a "cannot find the remote device" message when you use Toshiba BT Stack.

  I put my permananently visible to all Bluetooth phones and fortunately they send information to each other.

  For a few seconds, one of my phones connected using the Launcher free config (not something I normally use) but then the phone has disappeared from the screen and now can not be detected.

  I tried
  -turn on and off again;
  -connection by using the Nokia PC Suite application
  -connection by using the BT stack
  -connection using free config
  Without success.

  Any ideas?

  Maybe that your antenna has release the Bluetooth module so that your Bluetooth range is very limited.
  Can you try to move your mobile phones very close to your laptop and the search for your bluetooth phones?
  What is the result of the diagnosis function? :
  (right-mouse click on the Bluetooth icon in the systray-> Options-> Diagnostics-> Run (verification tests))

• Unable to ping the remote host IP address

  I have a home network with 2 desktop computers, printer, TV and BlueRay attached.  The PC is both XP and members of the same workgroup.  I can't get the connectivity between the PC 2.  With 1 PC, I ping successfully all connected devices, with the exception of 2 PC.  2 PC, I ping equipment successfully connected, including 1 PC...  I get the same information using a different router and a different network on 2 PC card.

  I tried the following steps of the Article 314067:

  1. check on two PC's TCP/IP configuration.  Result: good on both PCs.

  2. use the ping tool to test connectivity.

  • Ping the loopback address.  Result: good on both PC
  • Ping to the IP address of the local computer.  Result: good on both PC
  • Ping the IP address of the default gateway.  Result: good on both PCs.
  • Ping to the IP address of the remote host.  Result: bad on PC 1, good on PC 2
  • Ping other IP addresses on the network.  Result: good on both PCs.
  • Ping the host name of the other PC.  Result: bad on PC 1, good on PC 2

  Article:

  If the ping command fails, the remote host may not be responding, or there may be a problem with the hardware of network between computers. To the rule

  on a remote host does not respond, use Ping again to a different remote host.

  If you cannot use Ping successfully at any time, verify the following configurations:

  1. Make sure that the IP address of the local computer is valid and that it is correct on the

  Tab general of the Internet Protocol (TCP/IP) properties dialog or box when it is used with the Ipconfig tool.  Result: good on both PC

  Make sure that the default gateway is configured and that the link between the host and the default gateway works. For the purposes of troubleshooting, make sure that this gateway by default is configured. You can configure multiple default gateways, gateways after the first gateway is used only if the IP stack determines that the original gateway is not working. Diagnosis is to determine the State of the first configured gateway. Therefore, you can delete all the other gateways to simplify your task.  Result: good on both PC
  Make sure that Internet Protocol security (IPSec) is not enabled. According to the IPSec policy, Ping packets may be blocked or may require security. For more information about IPSec, go to method 7: Verify Internet Protocol security (IPSec).  Result: good on both PC

  Thanks for your suggestions you may have.

  Hello

  Firewall such as Norton, McAfee etc can cause a loss of network connectivity, even when the network is correctly configured. Try disabling the firewall on both computers to see if the ping works.

  Tricky

• I lost the contents of all the template files, the index file and others on the local site. Unable to GET the remote file to update. CS5 and Windows 8.

  I went to edit the index page of Kaufmantx.org and things were going very well. Went home and came back the next day and showed 0kb file. Gone!  I tried to download the file from the remote site, and it will not download. So, I say! I will build all over again and then I find my models have content 0kb. The remote site works well.

  Download and install a free FTP program called Filezilla and see if it downloads.

  You can retrieve your model in you making here in a browser and save the page as HTML only.

  It cannot be the most recent revision.

  http://kaufmantx.org/templates/base_template12.dwt

  Murray Summers can tell you how to recreate your model if you have a page of the child.

• Make the remote web server accessible via VPN Site to website

  We have two test sites that are connected by a tunnel IPSEC VPN site-to-site (hosted on a SAA each site) over the Internet. We are trying to set up an environment to test two web applications running side by side. Two web servers are running on the Site of Test 1. We don't have the same public IP available at each site.

  To address the public site 1 unique IP address restriction, we try to install ACL and NAT rules to have 2 Site accept traffic from the internet and send it on the site to the other tunnel. So 1 Web server would accept the ASA 1 internet traffic and Web Server 2 accept traffic from ASA 2 to the other site. Here's a network diagram:

  

  We have difficulties to get this configuration works correctly. Please note that the network 192.168.3.0/24 clients are able to access the servers Web1 and Web2. This question seems to be due to our NAT configuration. This is the type of error, we see on the two firewalls:

  Asymmetrical NAT rules matched for flows forward and backward; Connection for tcp src outside:4.4.4.4/443 dst outside:192.168.1.10/443 refused due to path failure reverse that of NAT

  Our situation seems similar to this post: https://supportforums.cisco.com/thread/2242230

  Any help would be appreciated.

  Hello

  What Karsten said above is true. While it is possible and works, it also means that the configuration is a little more complex to manage. I have done no such features in a real-life network environment and have always used additional public IP addresses on the local site when a server is hosted.

  If you want to continue to move forward with this so here's a few points to consider and the configurations that you need.

  First off it seems to me that the other server will be organized by the local Site 1 so a simple static PAT (Port Forward) must manage the Site 1.

  network of the WEB-HTTP object

  host 192.168.1.10

  NAT (inside, outside) interface static tcp 443 443 service

  And if you need TCP/80 also then you will need

  network of the HTTPS WEB object

  host 192.168.1.10

  NAT (inside, outside) interface static service tcp 80 80

  Now, 2 Site will naturally a little different that the server is hosted on the Site 1 and Site 2 is the public IP address used to publish the server on the external network.

  Essentially, you will need to configure NAT that both makes dynamic PAT for the addresses of the source of the connection to your server Web 2, but also makes the static PAT (Port Forward) for the IP address of the Web Server 2. Additionally, you have to set the area of encryption on the Site 1 and Site 2 to match this new addition to the L2L VPN connection.

  Unless of course you use an existing IP address on the field of encryption in the dynamic translation of PAT for the source address. In this case, it would take no change VPN L2L. I'll use that in the example below.

  The NAT configuration might look like this

  service object WWW

  destination eq 80 tcp service

  service object HTTPS

  destination eq 443 tcp service

  the object SOURCE-PAT-IP network

  host 192.168.3.254

  network of the WEB-SERVER-2-SITE1 object

  host 192.168.1.11

  NAT (outside, outside) 1 dynamic source no matter what static SOURCE-PAT-IP destination interface WEB-SERVER-2-SITE1 service WWW WWW

  NAT (outdoors, outdoor), 2 dynamic source no matter what static SOURCE-PAT-IP destination interface WEB-SERVER-2-SITE1 service HTTPS HTTPS

  So, essentially, NAT configurations above should ake 'all' traffic coming from behind 'outside' interface intended to "outside" "interface" IP address and translate the source to ' SOURCE-PAT-IP ' address and untranslate destination to "WEB-SERVER-2-SITE1".

  Make sure that the IP address chosen (in this case 192.168.3.254) is not used on any device. If she is then replace it with something that is not currently used in the network. Otherwise, configure an IP address of some other subnet and include in the L2L VPN configurations on both sites.

  Unless you already have it, you also have this configuration command to activate the traffic to make a U-turn/pin on the ' outside ' of the Site 2 ASA interface

  permit same-security-traffic intra-interface

  Hope this helps

  Remember to mark a reply as the answer if it answered your question.

  Feel free to ask more if necessary.

  -Jouni