Similar Questions

• ASA anyconnect Webvpn does not work after upgrade to 9.42

  Hello

  I updated ASA5512x to version 9.4 (2) 6. Since the upgrade only anyconnect vpn connection works, if another connection starts, he launched the first out and struggled to start the connection. The ASA has 10 premium licenses and worked at 8.6

  Any advice would be appreciated. Thank you very much.

  Try going to asa942-11-smp - k8.bin.

• Cisco asa anyconnect vpn client mode issue

  Hi team,

  I get my users anyconnect vpn connection failures very frequently and it that comesup.

  Can you please check see the version attached and explain, if I run with licenses right into place.

  concerning

  SecIT

  Hello

  You've got license for 250 users anyconnect so unless you are having more users than this number, it shouldn't be a problem. Debugs could help reduce the problem in this case.

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• Not able to download the instant client

  Tried several times. Go to The Instant Client downloads for Mac OS X (Intel x 86). Accept the agreement. Then click on the download link. Get this:

  Sorry

  !In order to download products from Oracle Technology Network, you must accept the OTN license terms.Make sure that...Your browser has 'cookies' and JavaScript active.You have clicked on "Accept license" for the product you want to download.You try the download within 30 minutes of the acceptance of the license.From here, you can go...

  	Back to previous Page
  	Site map
  	OTN homepage

  Please report to us.  It should now work.

• Program does not work after downloading the sp2 and sp3

  After spending hours and hours trying to download sp2 and sp3, I finally got to download completely successfully. for some strange reason when I try to open programs like weather bug and msn messenger they open but close immediately. How can I fix it?

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Sims 3 is not working after downloading the patch town on it.

  Original title: My Sims 3 usually work!

  My Sims 3 only works after I downloaded a new city for. He used just to open! Please help me!

  Hello

  
  1. what operating system is installed on the computer?
  2. do you get an error message?
  
  Method 1: Uninstall the Sims 3 and then install it and see if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
   
  Method 2: If the problem persists, contact the Support of SIMS.

  http://Forum.thesims3.com/JForum/forums/list.page

  
  Hope this information helps.

• AnyConnect VPN Client - works with IPsec

  Hello

  How can I do for AnyConnect VPN Client works with ipsec?

  I tried with SSL and works normally.

  But with IPsec does not work. Should I do something?

  Thank you

  Rodrigo

  Rodrigo, Anyconnect works with SSL, in order to use IPSec, you must the Cisco VPN Client.

• Cisco AnyConnect VPN Client maintains reconnection

  Hello

  We have recently installed an ASA5505 and activated the VPN access.

  Two of my colleagues have no problems connecting to the VPN using Cisco AnyConnect VPN Client, but I do.

  I am still disconnected after a few seconds with the message:

  "A VPN reconnect gave rise to different configuration settings. VPN network interface is to be reset. Applications using the private network may be required to restart. »

  Cisco AnyConnect VPN Client Version 2.5.2019

  I work with Windows 7 but the same thing happens when I try to connect using my computer that is running Windows Vista.

  My colleagues also using Win7

  I also tried to disable the Windows Firewall.

  Any help would be appreciated.

  Best regards

  Peter

  TAC has been able to solve the problem.   For webvpn mtu changed default from 1406 to 1200.

  Not sure why 2 other ASAs we work very well otherwise though!

  WebVPN
  SVC mtu 1200

• Windows 10 anyconnect vpn client

  Can someone please explain to me how to download the windows client to vpn anyconnect 10 on my asa 5516 9.5 version and configure the asa for windows 10 clients? Any help would be greatly appreciated.

  Thank you

  Lake

  Hello Lakeram,

  It's the same process, you must download the AnyConnect that is officially supported by Windows 10, as you can see below:

  AnyConnect 3.1MR10 (3.1.10010) and later are compatible with Windows 10 official release. Technical assistance Center (TAC) will be available from 29/07/2015.

  Download package on the flash of the ASA and the move to the WebVPN as image for Windows, and then configure the Tunnel Group, group policy and the XML profile, please follow the guide below:

  - http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyc...

  - http://www.cisco.com/c/en/us/support/docs/security/anyconnect-secure-mob...

  Those two will help you to properly, configure the AnyConnect

  Keep me posted, please note and mark it as correct the useful message

  David Castro,

• AnyConnect VPN client authentication using certificates

  Guys, I'm trying to configure my ASA5505 to authenticate the AnyConnect VPN clients using certificates. I have 'Certificates' defined as my method of authentication in my AnyConnect connection profile (see screenshot), but I get 'Certificate Validation failure' whenever I try to connect. The certificate I want to use is a computer issued by my CA certificate company root (Windows Server 2008 running Active Directory Certificate Services). Screenshot of certificate is attached. I added the root certificate on the SAA, and I tried all kinds of combinations by using the corresponding certificate in the AnyConnect Client profile. Each attempt failed, and I'm having no luck finding documentation on how to proceed. Any help would be greatly appreciated!

  Hello Shaun,

  The problem you're describing, not be able to authenticate through certificate through Microsoft Internet Explorer, is the fact that the certificate is in the computer store.  You do not want to confirm with Microsoft, but, I understand that only Microsoft Internet users explore the user store, this certificate is not available to attend the ASA via the Internet browser.

  -Craig

• The ID attribute of the station call needs for Anyconnect VPN client MAC address

  Hi all

  We test tring Anyconnect VPN users to connect using the certificate. ASA East of validation / authentication user based on cert and approval it requires Radius server (ISE). Currently ASA sends the Ip address of the VPN client in «calling station ID» We want ASA to send the Anyconnect VPN client MAC address to the radius server in RADIUS attribute «calling station ID»  Is it possible to do this. Get around them?

  Parag salvation,

  The calling Station ID always contains the IP if Anyconnect VPN.

  L3 is originally unlike wireless which has L2 Assoc.

  Currently no work around.

  Respect of

  Ed

• AnyConnect vpn client gives error of certificate on ios cisco 2800 series

  Dear all,

  I set up a vpn on cisco router ios simple anyconnect 2811

  I also configured natting on the inorder of router to access the internet for local users

  My problem

  I can not connect same vpn if I use the method of the anyconnect vpn client

  Also please tell me how to access internal resources by configuring split tunneling

  the error I get is as below

  
  

  * 08:16:35.947 Feb 8: 252:error:14094416:SSL routines: SSL3_READ_BYTES:sslv3 certificate alert unknown:../../../../cisco.comp/pki_ssl/src/openssl/dist/ssl/s3_pkt
  .c:1062:SSL alert number 46

  Here is my configuration

  ABC host name
  !

  start the flash system: c2800nm-advsecurityk9 - mz.124 - 24.T1.bin

  !
  AAA new-model
  !
  !
  AAA authentication login default local
  local connection SSL-VPN-AUTH authentication AAA
  !
  !
  AAA - the id of the joint session
  !
  dot11 syslog
  IP source-route
  !
  !
  IP cef
  !
  !
  IP-server names 4.2.2.2
  !
  Authenticated MultiLink bundle-name Panel
  !
  !
  !
  Crypto pki trustpoint ABC
  enrollment selfsigned
  crl revocation checking
  rsakeypair ABC 1024
  !
  !
  ABC crypto pki certificate chain
  self-signed certificate 04
  3082023 HAS 308201 3 A0030201 02020104 300 D 0609 2A 864886 F70D0101 04050030
  27312530 2306092A 864886F7 0D 010902 73 732 6569 6173742D 6B 686177 16166D
  616E6565 6A2D7261 31313032 30383038 32333036 5A170D32 30303130 301E170D
  3030305A 31303030 30273125 30230609 2 A 864886 F70D0109 0216166D 65 73732
  2D6B6861 69617374 77616E65 656A2D72 6130819F 300 D 0609 2A 864886 F70D0101
  01050003 818 0030 81890281 8100C16D 1007E434 AFAEE3C1 90141205 E7785754
  FA3C4589 3D6B3D47 57BC54A5 7237E7FE 9B7CA69C 999B4DAF 835B98E9 972CFD03
  5A43488C 05E82E10 9B540AB9 5A54AB0C 525FED0E 05B6F2FF 6703F0BD F28AE6F2
  9E98298D E184CCDC 2D54741D 589 9731 C2BA5191 59DC7DC8 1F03C116 DDCF21EB D
  0BB4E931 02F61F64 D64A6F36 92F70203 010001A 3 76307430 0F060355 1 130101
  FF040530 030101FF 30210603 551D 1104 1A 301882 7373 656961 2 73742D6B 166D
  68617761 2 726130 1 230418 30168014 2FA1E05E 1BD981A0 1F060355 6E65656A
  A3485444 0B151D9E 44A3F6F6 301D 0603 551D0E04 1604142F A1E05E1B D981A0A3
  4854440B 151D9E44 A3F6F630 0D06092A 864886F7 010104 05000381 810096EF 0D
  39D4EEED E3CA162B E6BC1B61 0C3C66ED 02884209 0F4B54F1 BA7BEFF4 CAA206CE
  44 C 99817 134363 2 F29A9E6A 945AA1B4 E4B85ED7 1800DAA1 30BE25C3 8340AE80
  714F8FBD 9A433C4B 3EE2204D 88F7AB6D 929B5C88 5E7BC2B9 25754390 1622DB7B
  EEB11694 F381E995 59C825BE 52EA5923 F87C43A3 98744BE8 BB27C381 BE14
  quit smoking
  !
  !
  privilege of username XXXX XXXX 15
  username password ABC ABC
  Archives
  The config log
  hidekeys
  !
  !
  !
  !
  !
  !
  !
  !
  interface FastEthernet0/0
  IP address | public IP address. 255.255.255.252
  NAT outside IP
  IP virtual-reassembly
  automatic duplex
  automatic speed
  !
  interface FastEthernet0/1
  IP 192.168.0.7 255.255.255.0
  IP nat inside
  IP virtual-reassembly
  automatic duplex
  automatic speed
  !
  interface FastEthernet0/2/0
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  local pool IP 10.10.10.1 intranet 10.10.10.254
  IP forward-Protocol ND
  IP route 0.0.0.0 0.0.0.0 GATEWAY
  no ip address of the http server
  IP http secure server
  !
  !
  IP nat inside source map route sheep interface FastEthernet0/0 overload
  !
  extended IP access allow-traffic-to-lan list
  deny ip 192.168.0.0 0.0.0.255 10.10.10.0 0.0.0.255
  Licensing ip 192.168.0.0 0.0.0.255 any
  !
  access-list 101 permit ip 192.168.0.0 0.0.0.255 10.10.10.0 0.0.0.255
  !
  !
  !
  sheep allowed 10 route map
  match ip address allow-traffic-to-lan
  !
  !
  !
  WebVPN EIAST gateway
  IP address | public-ip | port 443
  redirect http port 80
  SSL trustpoint ABC
  development
  !
  WebVPN install svc flash:/webvpn/anyconnect-win-2.5.2018-k9.pkg sequence 1
  !
  WebVPN context XYZ
  SSL authentication check all
  !
  !
  political group XYZ
  functions compatible svc
  SVC-pool of addresses "intranet".
  SVC split include 10.10.10.0 255.255.255.0
  SVC-Server primary dns 213.42.20.20
  Group Policy - by default-XYZ
  list of authentication SSL-VPN-AUTH of AAA.
  area of bridge XYZ XYZ
  10 Max-users
  development
  !
  end

  Thank you

  Jvalin

  You could hit the next bug

  CSCtb73337    AnyConnect does not work with IOS if cert not trust/name of offset
  which is set at 12.4 (24) T02.

  Please update the code and give it a try.

• Y700 - Dolby Audio does not work after resetting the system

  After resetting my computer to factory settings, audio dolby does not work. This is the error message I get:

  "Your installation is missing components. Reinstall the audio driver or the stand-alone components available on the support site for the manufacturer of your PC. »

  His works on my computer, just not this request.

  Thanks for the help.

  Matt

  I have the same problem, I have a 70-Z40 and the Dolby Digital Plus open, but does not work, you can choose the profile but is not even, I have this problem after the last windows 10 updated a few days ago.

  I hope you can help, thanks in advance

  EDIT: I solved it after a few tries, I don't know if it is the best way, but it's how I solve this problem:

  (1) Delete last windows update (after that, it did not)

  (2) delete the sound driver from Device Manager and reboot (it did not)

  (3) download the driver for my lenovo model page and install it (it did not)

  (4) any uninstall Conexant audio and Dolby of my computer and re - install again (it does not), it seems that my dolby 7.6.4.9 driver version is not correct, I need the 7.5.1.1

  (5) again to uninstall everything and restart

  -From there, he solved my problem

  (6) go on my computer (my system is in Spanish, so I don't know the correct name for the version in English, sorry) and then go to the Lenovo partition, then open drivers > Audio > Setup.exe This will install your Conexant audio driver, and then restart.

  (7) after you restart your laptor, do the same thing... Lenovo > drivers > Audio > DolbyGUI > x 64 > DolbyDigitalPlusHT.msi, and then restart your computer and it should work fine.

  Sorry for my English.

  See you soon

• My toshiba notebook webcam does not work; It shows the hearts.

  My toshiba notebook webcam does not work; It shows the hearts on the video screen

  Hi KurtKawohl,

  1. what operating system is installed on the computer?
  2. have you made changes on the computer recently?
  3. What is the Toshiba laptop model number?
  4. do you get an error message?
  
  Method 1
  If you use Windows 7 , and then run the hardware and peripheral troubleshooting tool.

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
  
  Method 2
  I suggest you to download and install the drivers from the Web from Toshiba website for your webcam by selecting the model number of your laptop from the following link:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-in/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Update of Vista 32 bit does not work after replacing the hard drive

  A month ago the hard drive of my computer (ACER Aspire 6920) had to be replaced. The disk image hard precedent (which includes the c: with Windows Vista Home Premium 32 bit, SP 2 build 6002) has been mirrored to the new hard drive. Everything seemed to work fine until I noticed that I don't have more updates from Microsoft. I tried a manual update and got the message that the update service was not working and I have to restart the computer. However, the Task Manager showed that the update service has been executed. Of course, I rebooted the computer, but nothing has changed.

  I found a whole bunch of recommendations for this issue in this forum, but nothing seems to work:

  • The Microsoft FixIT tool indicates a problem with the update of components, and then said that the problem had been solved successfully. However, the problem is still there and rerun the FixIt tool Gets the same message on a problem (yet) found and fixed.
  • I also stopped the update service, delete all content in Windows/C:\Windows\SoftwareDistribution and restarted the service. without success.
  • I've temporarily disabled my security suite (Eset Smart Security 6) and tried the update. I also have fittings the folder C:\Windows\SoftwareDistribution to the scope of the antivirus, without success. On the old hard drive, I used a different security suite so I thought that maybe the ESET (that I installed everything recently) could be the cause of the problem, but that doesn't seem to be the case.
  • I also followed the instructions provided by Microsoft at http://support.microsoft.com/kb/971058, but again, no change at all. However, it should be noted that registering some DLLs that Microsoft listed does not work (message that the DLL is not found or some server entry point (my translation, I'm using the German UI and don't know English good term; sorry) could not be found.)

  Http://support.microsoft.com/kb/947821 , I found another tool that supposedly can solve some problems of updating; I downloaded the version for Vista 32-bit, but it cannot install it on my computer (error code = 0xc8000247 during installation).

  So I'm really lost now what else to do. I would appreciate any suggestions. Please note that I am not technically very warned :)

  ARG, apologies.

  Was not aware that they had dropped support for Vista... (I myself have 'graduated' Vista earlier)

  The fact that you have not already installed TSRI is exactly your problem.

  Recent hard drives using 'Sectors 4 K', also known as 'Advanced Format Technology'.

  If the installed hard disk driver currently is not compatible with this specification,

  It will result in oddities like the status of the service Windows Update is not recognized correctly.

  Installation TSRI will fix this in most cases.

  Alternatively, if you are using Vista SP1 or later version (or 7 SP1), you can use the real driver.

  Since you are already updated to SP2, we will see if it is a viable solution.

  Go to: start-> Control Panel-> programs-> programs and features

  In the list of installed programs, locate and remove if found.

  -Intel Matrix Storage Manager

  -Intel Turbo Memory

  This should force your computer to go back to the real driver provided by Vista.