ASA Cisco license issues

Similar Questions

• ASA 5540 licenses

  Am I limited to a certain number of sessions anyconnect? Should clarify it please?

  The devices allowed for this platform:

  The maximum physical Interfaces: unlimited

  VLAN maximum: 200

  Internal hosts: unlimited

  Failover: Active/active

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Security contexts: 2

  GTP/GPRS: disabled

  VPN peers: 5000

  WebVPN peers: 2

  AnyConnect for Mobile: disabled

  AnyConnect for Linksys phone: disabled

  Assessment of Advanced endpoint: disabled

  Proxy UC sessions: 2

  It seems that you have the basic licence that only support 2 session anyconnect.

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/license/license82.html#wp172967

• W2K8 R2 Licensing Issue: passes during the migration of parallel hardware

  We have a very old application server run on W2K8 R2 stand-alone (no advertising).  We decide to migrate the server to new hardware.

  Freshly install us the operating system, create user accounts, and install the application on the new hardware.  To play safe, we intend to have a parallel run for 3-4 weeks.

  Our question is: will there be a problem when we apply the OS on the new server license?  Where could I find more resources on licensing issues associated with these migrations?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Cannot play DVD movies on due to licensing issues.

  My friend built me a computer and installed a Dvd inside player.  Unfortunately, when I put in the DVD videos, I can't view because of licensing issues.  I know that most other DVD readers can read the videos without these problems.  I think that my dvd drive is an ATAPI iHAS120 6.  Help, please.

  This is the message I get when I try to play the DVD.  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I think that these DVDs are protected by DRM, but they played on my sister's laptop.

  ====================================
  FWIW... Win XP cannot natively recognize Commercial
  DVD video... it requires a DVD decoder.

  If you could play before commercial video DVD...
  do a system restore to a time before this started
  may be your solution.

  Or you could buy a DVD decoder at the following link:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Or you can download and use one of the following freeware
  media players:

  VLC Media Player
  http://www.videolan.org/

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)

  Or... you can try to download and install one of the
  Following codec packs.

  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates).

  * Proceed at your own risk *.

  (1) K-Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/

  (2) information on CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Adding a new license for a new Member, but may not use programs. Saying licensing issues... any advice?

  Adding a new license for a new Member, but may not use programs. Saying licensing issues... any advice?

  You use the Enterprise Dashboard?

  If so

  1. ensure that they use the correct ID type. So if they have been added to the dashboard with Enterprise or federated ID to ensure they do not use the Adobe ID or vice versa.

  2. bring to sign out and sign back in to check their eligibility.

  3. If the problem persists, then try this:

  The opm.db file contains the login user cached information and delete this file is a useful troubleshooting step. Once deleted a fresh file will be automatically created when you start creative cloud and reconnect.

  1. Close the creative cloud application.
  2. Navigate to the OOBE folder.
     Windows: [system drive]: \Users\ [user name] \AppData\Local\Adobe\OOBE
     Mac OS: /Users/ [user name] / folder/Library/Application Support / Adobe / OOBE
  3. Delete the file opm.db.
  4. Launch the creative cloud.

• Licensing issues when I go to re - install on a new machine?

  I had Illustrator CS5 installed on 2 machines (1 license). A machine that crashed, obviously before, I managed to uninstall officially. Did I meet licensing issues when I go to re - install on a new machine?

  Yes, you are noit be able to activate the new installation until you disable the one you had.  Uninstallation is not necessary but disabling is.  You can contact Adobe support using cat and they can manage the deactivation of inaccessible installation.

  Serial number and activation support (non - CC) chat

  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Audio and licensing issues

  I recorded a clip long using Sony PMW - EX1 in SD on location 1 hour and 50 minutes, exported the m2t format on external hard drive file, then imported to the pre Pro CS3 on my computer for editing.  I loaded the clip in the timeline to start to change and the first 30 minutes of audio played normally, then it started during the early.  The last 30 minutes. the audio was lost.  1 hours and 50 minutes video was normal.  There is nothing wrong with the clip-it normally plays in Nero Show and plays normally in place.  Has happened to me before and I Redid the clip and everything was fine.  This cannot be redone. .

  I tried to do a new preferences file No. aid.  I then reinstalled Pre Pro-aucune help.  I tried to reload the clip several times-no help.  I reinstalled Pre Pro new-oops-now my license has stopped working.  I tried several times to phone support, and I tried the web support.  Phone support said they'd call me back - they do not have.  Web site offered for download and following the steps of an article of its base of knowledge (KB401528).  I did and it did not work.  When I went back to article the message says that this article does not exist.  Now, there is a problem with the site that will not let me submit the messages they disappear and are not received.  It seems that all modes of communication with technical support are blocked.

  I'm really frustrated with Adobe Support.  I see a letter explaining there are problems with tech support-not a joke.  Anyone out there have any suggestions?  It is a commercial project with very quickly approaching - any suggestions would be appreciated.  First issue is license issue resolved because Pre Pro will not open.  Also need to fix audio problem.  Thanks - Dorian

  The audio problem is weird. Perhaps it is caused by the lack of space on your C: drive, but he is just guessing. Make sure to leave enough time PR conform the audio before you start editing.

  

• Cisco ASA 5510 + license + AIP - SSM

  Hello.

  I have this box.

  I have a few questions about it.

  (1) I'll be able to update the firmware (from 8.2 to 8.3 or greater for example) without smarnet for ASA 5510? And what can not do without smartnet?

  (2) I have only AIP-SSM-10 module this ASA 5510. is there a smartnet, too? And when I buy only one module is it build in a subscription for 1 year for the signatures of the IPS?

  (3) if I have the Cisco ASA 5510 base license, my IPS on AIP-SSM-10 will work?

  (4) as I foresee in a purchase of the year a 5510 more with the same module and mount ther of failover. I really need license Security more than failover (active / standby)? For active/active, I know I need one, Yes?

  Please help me.

  (1) you must Smartnet in order to download the software from the download from cisco.com site.

  (2) Yes, there is also a smartnet for the AIP module. Module AIP does not come with one year subscription, but you can ask for a demo license.

  (3) Yes, the basic license is OK for the AIP module.

  (4) Yes, you would need license security more on the two ASA to be able to run any type of failover on ASA5510.

  Hope that answers your questions.

• I have purchased the Cisco license... But nothing is the change of the ASA

  Hello guys

  I bought the new ASA 5505 10 - for unlimited user upgrade, so my basic license previous was 3 restricted DMZ VLAN, and when I bought the details include a Vlan 20 - trunk.   and now there is no change with the Vlan. only 10 host transformed into unlimited,

  I think I lost $ 300, so what is the problem please it is urgent HELP HELP

  Even if you do not have Smartnet, a license question, ask the CTA since this is a new purchase.

  I suspect that the order was coded wrrong or the license has been generated incorrectly.

  Your license email must indicate the characteristics of the expected product.

• ASA Cisco VPN remote queries

  Hi all

  I have 2 queries - kindly assist

  1. for customer ipsec remote vpn ikev1, are there license restrictions?

  2. main differences between above and Anyconnect?

  ~ is so useful rate :)

  1. Yes, there is a restriction based on the number of concurrent users connected with VPN. You can see the number of licenses under "Other VPN peers" when you run the version show on your ASA.

  2. the main difference is that anyconnect can use SSL or IPsec (IKEv2) for the then the classic Client VPN tunnel works on IKEv1. Also note that the old VPN Client is no longer supported by Cisco.

  I hope this helps.

• ASA 5505 Licensing / clarification of encryption

  Hello

  I have an ASA 5505 Security more than licenses.  The specific entry, that I focus on when I do a 'show' version is:

  AnyConnect Premium peer: 25 perpetual
  AnyConnect Essentials: 25 perpetual

  For my IPSEC IKEV2, I have:

  IKEv2 crypto policy 1
  aes-256 encryption
  integrity sha512
  Group 21
  FRP sha512
  seconds of life 10000

  Bringing a L2L VPN, I'm able to establish IPSEC/IKEV2 with DH group 21 without problem.
  But when I try to connect a remote client with Cisco Anyconnect, I get the following message:

  An IKEv2 remote access connection failed. Attempt to use an encryption without an AnyConnect Premium license of NSA Suite B (Group ECDH) algorithm.

  After research, I see that 19 Diffie-Hellman groups + are considered Next Gen NSA algorithms.  I guess that I don't have the correct license to support this with the AnyConnect client, so I edited my police ikev2 as follows:

  IKEv2 crypto policy 1
  14 21 group

  My problem is that I still get the same error.  Shouldn't the low AnyConnect - negotiate to group 14?  And shouldn't the L2L negotiate at the highest possible, group 21?

  All advice is appreciated.

  When you have licenses for AnyConnect Essentials and premium as ASA you must choose one or the other type for all customers AnyConnect.

  We see it in general where a customer started with the Essentials license, then later added Premium. When you do this, you must set up "no anyconnect essentials" in order to use features that require the level of Premium license.

  All Essentials customers should continue to work in your case, since the number of authorized users is equal on both types of licenses. On larger devices, licenses Premium can be less CALs Essentials since the former is sold by number of users (and can get very expensive on the larger machines because they are potentially 1000s of users) and the second is a relatively good cheap license which covers all of the device according to its material capacity.

  On the 5505 maximum capacity is 25 and you have same number already registered for the premium. (The premium SKU license available for this platform are 10 and 25).

• ASA 5510 licenses

  Hello experts!

  I'm looking forward for more information on licenses active / standby and according to this link http://www.cisco.com/en/US/partner/products/ps6120/prod_models_comparison.html I need to consider the licence security more, BUT according to this link: http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/ha_active_standby.html#wp1046838

  indicates that the Base license is necessary to achieve a/s HA configuration on ASA 8.2.

  The current version of the ASA: 8.0.

  I have to go to 8.2 (x) in order to activate the c/o HA configuration or is required to buy this security license more?

  Thanks in advance for your help!

  If you upgrade to 8.2 (x), you can run c/o HA without security over the license.

  If you stay with 8.0 (x), you must have Security Plus.

  With a 5505, you must always have Security Plus to c/o HA.

  Please rate if this helps.

  Thank you

  Tim

• ASA failover license

  I have two firewalls autonomous asa5525-x,

  on two of them, the command show version shows as active/active failover license. Can I use these two to make a pair of active failover / standby?

  ASA what are failover license types? Is this different from PIX?

  Active/active failover is available only for ASAs in multiple context mode. In an active/active failover configuration, the two ASAs can pass network traffic.

  Active failover / standby allows you to use an ASA helps to support the features of a failed unit. When the active unit fails, it changes sleep state while the rescue unit moves to the active state.

  For Active hybrid in multiple context mode, the ASA can switch the entire unit (including all contexts) but cannot switch on different contexts separately.

  In an active/active couple, amounts of license (if any) are merged. For example, the two 5510 s seats in a pair/active every 100 Premium SSL. The licenses will merge to have a total of 200 SSL VPN has helped the pair. The total number should be below the limit of the platform. If the number exceeds the limit of the platform (e.g. 250 SSL VPN connection on a 5510) the limit of the platform will be used on each.

  You can use the active / standby for you.

  You can check your information to license under the 'show version' and 'show activation key '. Here is an example:

  The devices allowed for this platform:<-----------------FEATURES which="" are="" available="" by="" your="">

  The maximum physical Interfaces: 8

  VLAN: 20, unrestricted DMZ

  Internal hosts: unlimited

  Failover: Active / standby

  VPN - A: enabled

  VPN-3DES-AES: enabled

  SSL VPN peers: 2

  The VPN peers total: 25

  Two Internet service providers: enabled

  VLAN Trunk Ports: 8

  Sharing license: disabled

  AnyConnect for Mobile: disabled

  AnyConnect VPN phone Cisco: enabled

  AnyConnect Essentials: disabled

  Assessment of Advanced endpoint: disabled

  Proxy sessions for the UC phone: 2

  Total number of Sessions of Proxy UC: 2

  Botnet traffic filter: disabled

  This platform includes an ASA 5505 Security Plus license.<--------------------- type="" of="" your="">

  Serial number: JMX00000000<------------------SERIAL>

  Activation key running: 0 x... 0x........ 0x........ 0x........ 0 x...<--------- activation="">

  ASA # display the keySerial activation number: JMX00000000Running activation key permanent: 0 x - 0 x - 0 x - 0 x - 0 x - x 0.
  Activation key running time: 0 x "' 0 x" ' 0 x "' 0 x" ' 0 x "' 0 x" '

  Licenses required for active/active failover

  #

  The following table shows the licenses required for this function:

  # #

  # Model	# Condition of licence
  # ASA 5505	# No support.
  # ASA 5510 ASA 5512-X	# Security Plus license.
  # All other models	# Base license.

  Conditions of licence for an active failover / standby

  #

  The following table shows the licenses required for this function:

  # #

  # Model	# Condition of licence
  # ASA 5505	# Security Plus license. (Dynamic failover is not supported).
  # ASA 5510 ASA 5512-X	# Security Plus license.
  # All other models

  #

  Base license.

  Active/active failover

  You cannot use the active/active failover and VPN; If you want to use VPN, use active failover / standby.

  http://www.Cisco.com/en/us/docs/security/ASA/asa83/license_standalone/license_management/license.html

  Please note!

  Post edited by: sachin gelin

• How SSL VPN packages for two ASAs clustered licenses

  Hi all!

  If I have installed two Cisco ASA 5550 (ASA5550-BUN-K9) in failover mode, which I know support only 2 concurrent sessions of SSL VPN and you want to upgrade my boxes to support 15 AnyConnect SSL VPN sessions, how many licenses packages I need to buy?

  An ASA5500-SSL-25 for both boxes or two ASA5500-SSL-25 for one per box?

  Depends on what version of ASA you are running.

  If you are running version 8.3 and above, then you just buy 1 ASA5500-SSL-25 for a failover pair and it would work. If you buy 2 ASA5500-SSL-25, one license per box in failover pair, then the license gets grouped into 50 SSL user license.

  Here is the license information for ASA version 8.3 for failover pair:

  http://www.Cisco.com/en/us/docs/security/ASA/asa83/license_standalone/license_management/license.html#wp1315746

  For ASA running version 8.2 and below, you are required to buy 2 ASA5500-SSL-25 (one of each ASA in the failover pair) as the license should be exactly the same for the pair to failover to work, in the earlier version of the SAA.

  Hope that makes sense.

• Selection of ASA 5505 license and Smartnet

  Hello

  We bought an ASA 5505 (ASA5505-BUN-K9) and more recently bought the license to upgrade from 10 to 50 users (L-ASA5505-10-50).

  I want to provide remote access to users via AnyConnect - specifically, AnyConnnect under Windows as well as iPhone/iPad and Android.  My understanding is that I should buy the Anyconnect Essentials (L-ASA-AC-E-5505) and permits Anyconnect Mobile (L-ASA-AC-M-5505).  Is this correct?  If I do this, simultaneous remote access VPN connections (via the Anyconnect customers) how the ASA will then support?

  In addition, we did not purchase initially Smartnet with this device, but I want to do to access the software updates.  Y at - it a document or a site where I can locate the SKU # s Smartnet contracts that would be appropriate with our device?  Or could someone provide a few example SKU #?

  The output of 'see the version' is below:

  Cisco Adaptive Security Appliance Software Version 8.3 (1)

  Version 6.3 Device Manager (1)

  Updated Friday, March 4, 10 16:56 by manufacturers

  System image file is "disk0: / asa831 - k8.bin.

  The configuration file to the startup was "startup-config '.

  asa1 until dry 42

  Material: ASA5505, 512 MB RAM, 500 MHz Geode Processor

  Internal ATA Compact Flash, 128 MB

  BIOS Flash M50FW016 @ 0xfff00000, 2048KB

  Hardware encryption device: Cisco ASA-5505 Accelerator Board (revision 0 x 0)

  Start firmware: CN1000-MC-BOOT - 2.00

  SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03

  Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.06

  0: Int: internal-Data0/0: the address is 649e.f3b3.c2bb, irq 11

  1: Ext: Ethernet0/0: the address is 649e.f3b3.c2b3, irq 255

  2: Ext: Ethernet0/1: the address is 649e.f3b3.c2b4, irq 255

  3: Ext: Ethernet0/2: the address is 649e.f3b3.c2b5, irq 255

  4: Ext: Ethernet0/3: the address is 649e.f3b3.c2b6, irq 255

  5: Ext: Ethernet0/4: the address is 649e.f3b3.c2b7, irq 255

  6: Ext: Ethernet0/5: the address is 649e.f3b3.c2b8, irq 255

  7: Ext: Ethernet0/6: the address is 649e.f3b3.c2b9, irq 255

  8: Ext: Ethernet0/7: the address is 649e.f3b3.c2ba, irq 255

  9: Int: internal-Data0/1: the address is 0000.0003.0002, irq 255

  10: Int: not used: irq 255

  11: Int: not used: irq 255

  The devices allowed for this platform:

  The maximum physical Interfaces: 8 perpetual

  VLAN: 3 restricted DMZ

  Double ISP: Disabled perpetual

  Junction VIRTUAL LAN ports: perpetual 0

  The hosts on the inside: 50 perpetual

  Failover: Disabled perpetual

  VPN - A: enabled perpetual

  VPN-3DES-AES: activated perpetual

  SSL VPN peers: 2 perpetual

  Counterparts in total VPN: 10 perpetual

  Shared license: disabled perpetual

  AnyConnect for Mobile: disabled perpetual

  AnyConnect Cisco VPN phone: disabled perpetual

  AnyConnect Essentials: Disabled perpetual

  Assessment of Advanced endpoint: disabled perpetual

  Proxy UC phone sessions: 2 perpetual

  Proxy total UC sessions: 2 perpetual

  Botnet traffic filter: disabled perpetual

  Intercompany Media Engine: Disabled perpetual

  This platform includes a basic license.

  ---

  Thank you!

  Yes you are right, you must purchase the license key AnyConnect and AnyConnect Mobile, and you can run 25 maximum simultaneous AnyConnect

  Here are the compatible Android devices for your reference:

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect25/release/notes/RN-AC2.5-Android.html#wp1159723

  For Smartnet, whereby the service level you need, here are a few examples for ASA5505:

  -SMARTnet Premium 24 x 7 x 4 (SNTP): SNTP-CON-AS5B50K9

  -SMARTnet 8x5xNBD (SWW): CON-SNT-AS5B50K9